Hardware :: Brother MFC-8670DN -- Scanner Not Working In Ubuntu 9.04?

May 11, 2009

I just installed an all-in-one Brother MFC-8670DN in Ubuntu 9.04. The printing works great but I cannot get the scanner recognized. I tried brscan, brscan2 and brscan3 from the Linux section of the Brother website to no avail. Previously had a lower model Brother MFC working fine. I called Brother and they said that "I need to call Linux for help with the scanner." Anyone who can help with the Brother MFC-8670DN? It would be very much appreciated. This printer may go back to the store if I cannot get the scanner working in Ubuntu 9.04.

View 3 Replies


ADVERTISEMENT

Ubuntu :: Brother Scanner MFC-6490CW - Not Working After Upgrade To Natty 11.04

May 27, 2011

I have a Brother MFC-6490CW network Scanner. Had it installed and working great in Gutsy. Upgraded to Natty 11.04 the other day, and the scanner stopped working. Printing is still ok. When I try to open a scanning program I get:

"No Devices Found"

I tried reinstalling the drivers, no luck.

View 4 Replies View Related

Fedora Hardware :: Get Scanner Working In Brother DCP-385C - Error During Device I/O

Sep 1, 2009

I have recently installed Fedora11 and have managed to get the printer side of the above multifunction machine working but not the scanner . The computer recognises the scanner and sane, xsane, sanelib's etc are all installed . When I try to open it it gives the following:

Failed to open device 'brother3:bus5;dev1': Error during device I/O

View 6 Replies View Related

Ubuntu :: Can't Use Scanner On Brother DCP 7020

Mar 7, 2010

I'm using 9.10 on x86 architecture. I've searched the forums and anything related to scanning talks about editing /etc/udev/rules.d/45-libsane.rules which doesn't seem to exist on my system. Judging from the dates most of these posts probably relate to intrepid or jaunty. XSane just says 'no devices available'. Printing works fine.

View 6 Replies View Related

Ubuntu :: Scanner Driver For Brother MFC-665CW?

May 18, 2010

During installation of Ubuntu 10.04, there was no driver found for my Brother MFC-665CW printer/scanner. However, I recently learned on the Forum that there is a printer driver available for the MFC-665CW through Synaptic that can be accessed by searching on printer name. I got it, and it works great. I've not been successful in locating a driver for the scanner part of the MFC-665CW. Does anyone know if there is a driver available on Synaptic that will work for the scanner on a MFC-665CW, and if so how to get to it (i.e., what to search on to locate it)?

View 3 Replies View Related

Ubuntu :: Installing A New Brother Printer+scanner?

Jun 16, 2010

About a week ago I installed my first Linux (Ubuntu 10.04). Since then I've been trying to get my printer to work by following some of the instructions on the web.Unfortunately,as a newbie, I can't seem to get it right... The printer is - Brother DCP-135C.

View 4 Replies View Related

Ubuntu :: Brother Inkjet Printer & Scanner Failed

Oct 12, 2010

I have a Brother MFC-240C inkjet printer & scanner. On installation of Maverick Meerkat v. 10.10, my scanner function failed. I added the same line into the file as for Lucid Lynx v. 10.04 and the scanner has scanned perfectly. The lines Brother gives are for the following file: Ubuntu 9.10, 10.04

1. Open "/lib/udev/rules.d/40-libsane.rules" file.
2. Add the following two lines to the end of the device list. (Before the line "# The following rule will disable ..."):

# Brother scanners
ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes"

above is found at: [URL]

View 6 Replies View Related

Fedora Installation :: Brother Scanner Won't Work In 13

Jul 12, 2010

Have a Brother MFC-9440CN the Scan function of which operated perfectly in Fedora 11. Have upgraded to Fedora 13, now when the Scanner Tool is activated (XSane .997) an error message is returned "Error during CMS conversion. Could Not open scanner ICM profile: (null)". Has anyone had and solved this problem, I have tried everything identified on the Brother web site. The scanner works perfectly when accessed through the Simple Scan application.

View 1 Replies View Related

Fedora Hardware :: Brother Scanner Not Detected By 14?

Nov 16, 2010

Just upgraded from Fedora 13 to 14. My network Brother MFC-9440CN will not operate (worked fine in F13). Error message from both Simple Scan and Scanner Tool (xsane) states "No devices available".

View 14 Replies View Related

Hardware :: Brother Scanner Not Being Recognized In Fedora 11?

Oct 15, 2009

I have a Brother MFC-7345 Printer/Scanner and I got the printer working but the scanner won't work. I've installed all the drivers from Brother and followed all their instructions but still nothing. sane-find-scanner gives me

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

[code]....

and scanimage -L gives me No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). read the documentation which came with this software (README, FAQ, manpages).

View 4 Replies View Related

Hardware :: Using Brother Scanner (MF) Under Non-root In Debian?

Mar 12, 2010

There is a problem with scanning on Brother multifunctional under Debian Squeeze/Sid. I get things smooth and good under root (both scanimage and xsane), but under user it gives

Code:

scanimage: open of device brother3:bus6;dev1 failed: Invalid argument Obviously as under root works fine, lsusb has no problems with detection.

Code:

Bus 005 Device 010: ID 04f9:01ea Brother Industries, Ltd

Already fixed /etc/fstab:

Code:

none /proc/bus/usb usbfs auto,devmode=0666 0 0

but it is useless anyway. I had already used the scanner under simple user in ubuntu and it all worked.

View 2 Replies View Related

Fedora Hardware :: Brother DCP 7030 - Scanner Does Not Work

Sep 27, 2010

I have a DCP 7030 multifunction printer. I have installed all proprietary drivers from Brother (printer an scanner drivers). [1] Printing works but unfortunately both Simple-scan and X-Sane do not recognize the scanner. Brother provides some scanner settings [2] - but unfortunately not for Fedora 13. I have tried the settings for Fedora 12 but they do not work. [URL]

View 1 Replies View Related

Fedora :: Scanner Driver For Brother DCP385C - Invalid Argument

Mar 23, 2011

My Brother DCP385 Printer/Scanner goes alright Printing but will not Scan. I keep getting this message: 'brother3:bus3:dev1': invalid argument. My OS is Fedora 14. Brother seems to only go up to Fedora 12 in their driver page . There is no mention of Fedora 14 .

Pentium 4, 80Gb HDD, 1Gb Ram

View 1 Replies View Related

Fedora :: Driver For Brother DCP385C Scanner - Invalid Argument

May 22, 2011

I have been looking through Brother drivers and can get the drivers for Brother DCP385C printer and scanner but the scanner will not work . It keeps telling me "failed to open device - 'Brother3:bus3;dev1':invalid argument" . I have looked into the Brother site but it does not tell me what to do for Fedora 14 . It only goes up to Fedora 12.

View 1 Replies View Related

Hardware :: Getting Canon 8800F Scanner Working / No Other Scanner Found?

Sep 23, 2010

Recently got a Canon Canoscan 8800F after looking it up on the SANE site and said it was completely supported for Linux.

I have downloaded the pixma drivers and have compiled the command line program, but it can't find the scanner.

lsusb returns a Canon scanner Bus 001 Device 005: ID 04a9:1901 Canon, Inc.

and sane-find-scanner returns:found USB scanner (vendor=0x04a9 [Canon], product=0x1901 [CanoScan]) at libusb:001:005

but scanimage -L (under my user login or sudo) returns only the webcam. No other scanner found.

My system is running Linux Mint 7, ia64 kernel 2.6.28-11-generic

View 8 Replies View Related

Ubuntu :: Canon MX320 Scanner Not Able To Get The XSane Image Scanner To Recognize Scanner?

Jul 11, 2010

I just received a Canon Pixma MX320 as a gift.

I am currently running the Ubuntu 10.04 OS

I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.

Unfortunately I am not having the same luck with the scanner.

I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.

View 2 Replies View Related

Ubuntu :: 11.04 - Brother MFC 5460CN Printer Not Working

Jul 19, 2011

I had it printing until the last cups upgrade. Brother support thinks it is something to do with the upgrade. We did a reinstall of the printer driver. The printer works on Virtual Box and the scanner works on Ubuntu, but not the printer. What do I need to have the printer work under 11.04?

View 9 Replies View Related

Ubuntu Installation :: Brother Printer On Lucid Not Working

Apr 20, 2010

I upgraded from Karmic to Lucid RC a couple of days ago and have been trying to work through a few problems since. One of these problems is printing with my Brother DCP506CN printer which was working in Karmic. However, I just can't seem to get it going in Lucid. I have followed the Brother linux install procedure, which worked for the the last few Ubuntu releases, but not for this one it seems.

View 3 Replies View Related

OpenSUSE Hardware :: Brother DCP7030 Not Working In 11.2

Dec 13, 2009

I've just made my printer (Brother DCP 7030) working with SuSE 11.2. The DCP 7030 driver from the Brother solutions hompage worked fine with SuSE 11.1 but not with 11.2. To make it work with 11.2 I installed the DCP8070D driver from the brother solutions hompage and now it works.

View 5 Replies View Related

Ubuntu :: Epson Stylus CX7450 - Scanner Not Working

Feb 2, 2010

Haven't been able to get my scanner to work on my Epson Stylus CX7450. XSane doesn't seem to support my scanner. Is there a way around this?

View 3 Replies View Related

Ubuntu :: Epson NX420 Printer With Working Scanner

Dec 5, 2010

I've been trying to get my Epson NX420 printer to scan for about three months now, and I finally got it working. Here's how:
1. Go to [URL] and search for your printer. Select distribution and version and answer a couple of other questions.
2. Download pipslite_1.5.0-2_i386.deb, (or the 64-bit version), and all the iscan*.deb files (again, appropriate to your system).
3. [CRITICAL] Go to [URL] and download this 8.04 package which worked just fine for me on 10.10.
4. Use the Software Center or GDebi or sudo dpkg -i the .debs in this order:

1) libtdl3, which is a dependency for Step 2.
2) pipslite
3) iscan-data
4) iscan-network
5) iscan
(If you use a USB connection, you don't need the iscan-network file.) This got my NX420 scanner up and running just fine. Installing libtdl3 was the key; in fact, I used the Debian Lenny package.

View 9 Replies View Related

Ubuntu :: Epson Stylus Cx4300 Scanner Not Working?

Jan 4, 2011

I have an Epson CX4300 on Ubuntu 10.10 and I can't get it to scan. I loaded the driver for CX4200 since CX4300 isn't listed in [URL]

sane-find-scanner finds the scanner but scanimage doesn't:
ilan@ilan-main:~$ sane-find-scanner -q
found USB scanner (vendor=0x04b8, product=0x083f) at libusb:003:002
ilan@ilan-main:~$ scanimage -L

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

XSane also reports No Devices available and number 4 in their possible reasons is The backend is not loaded by SANE (man sane-dll). I get: ilan@ilan-main:~$ man sane-dll No manual entry for sane-dll

I do get a man for sane-epson so that hints that the epson driver exists. The fact that sane-dll doesn't seem to exist is probably the problem. I'm using libsane in the Synaptic Package Manager and that is supposed to supply the backends. Should it include sane-dll?

View 6 Replies View Related

Hardware :: Scanner Not Recognized In Ubuntu Epson Stylus NX510 Printer/scanner?

Aug 15, 2010

I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.

View 7 Replies View Related

Ubuntu :: Canon FB 630P Scanner Driver / Can't Get System To Recognise The Scanner?

Dec 14, 2010

How to get this scanner to work with Ubuntu 10.10

It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.

I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.

Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...

View 3 Replies View Related

Ubuntu Networking :: Getting Epson Stylus TX550W Wi-Fi Scanner Working?

Jun 22, 2010

We recently got an Epson Stylus TX550W Printer/Scanner unit, shared over Wi-Fi with both Windows/Ubuntu PC's, while I have the printing working flawlessly, I don't know where to start to get the scanner working. I've Googled, but haven't come up with much, checked the Ubuntu documentation, apparently Ubuntu (9.10 & earlier, nothing about 10.04) don't automatically detect networked printers, is there a way to get it to recognize without editing config files, which I hate doing? I'm using Ubuntu 10.04 64-bit.

View 3 Replies View Related

Fedora :: How To Get Film And Slide Scanner Working

Oct 1, 2010

Just acquired a slide/negative scanner (Traveller TV6500) which is reputed only to work under Winderz. Anyone know of a way to get it to run under Fedora 12?

I'm running
Linux Fedora-Blue 2.6.32.21-168.fc12.i686 #1 SMP Wed Sep 15 16:25:04 UTC 2010 i686 athlon i386 GNU/Linux
lsusb shows
Bus 001 Device 019: ID 05a9:1550 OmniVision Technologies, Inc. VEHO Filmscanner

I've tried running it in a VirtualBox Windows XP, but it doesn't appear to work - goes off & churns but doesn't appear to get a picture back.

View 1 Replies View Related

Ubuntu Installation :: Device Busy Using Image Scan - Reports Could Not Send Command To Scanner Check The Scanner Status

Apr 9, 2010

Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports

'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..

View 3 Replies View Related

Ubuntu :: XSane Image Scanner Won't Recognize Scanner?

Sep 7, 2010

I've installed XSane Image Scanner. When I first opened it, it searched for my scanner and didn't give any error messages, and it had my scanner model in the heading of the scan window. But when I hit the scan button, it gave me saying, "Failed to start scanner: error during device I/O.I closed everything, and opened XSane again. This time it said there was no scanner available. The scanner is plugged into the USB port and uses that for both power and data. It's a Canoscan Model N650U.

View 9 Replies View Related

Fedora Hardware :: HP 1050 Deskjet All In One - Scanner Not Working

Apr 17, 2011

I can't get the scanner to work. I get this:
[pedroski@fangshan ~]$ scanimage -L
device `v4l:/dev/video0' is a Noname USB2.0 1.3M UVC WebCam virtual device
device `hpaio:/usb/Deskjet_1050_J410_series?serial=CN0CN3H3CZ05HW' is a Hewlett-Packard Deskjet_1050_J410_series all-in-one

and this
[pedroski@fangshan ~]$ scanimage -d hpaio:/usb/Deskjet_1050_J410_series?serial=CN0CN3H3CZ05HW -T
scanimage: open of device hpaio:/usb/Deskjet_1050_J410_series?serial=CN0CN3H3CZ05HW failed: Device busy.

Fedora came with 'Simple Scan' That also returns 'device busy'. Can this scanner work under Fedora? I have tried turning it off, then on. I have rebooted. I have hpijs and hplip installed also hplip-gui. I have put myself in the group lp.

View 14 Replies View Related

OpenSUSE Hardware :: HP OfficeJet 6110 Scanner Not Working?

Dec 18, 2009

I have a HP Office-Jet 6110 All-In-One for about 5 years now and I havve been using it on Suse and openSuse without a problem all these years. This morning I wanted to scan something and suddenly realised that the scanner is not working. I can print but not scan. i tried to set up the scanner using YaST like I have done for the past 5 years but it#s not working. Hpaio shows that no scanner is available for this driver. I can#t install the scanner. What has changed in 11.2 that devices that worked before are not working anymore?

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved