Debian Hardware :: Compile Driver For Laser Printer Brother HL1110 For AMD64
Mar 31, 2015
I have bought a BrotherHL-1110 laser printer. But there is no driver on my system. I have downloaded source code but don't understand how to compile it. (
It does only exist driver-packages for 32 bits: hl1110cupswrapper-3.0.1-1.i386.deb and hl1110lpr-3.0.1-1.i386.deb)
My system is:
Release 7.8 (wheezy) 64-bit
Kernel Linux 3.2.0-4-amd64
GNOME 3.4.2
AMD Athlon(tm) II X2 245 Processor × 2
The source code contain the following files:
-> pwd
/home/joe/Desktop/BrotherHL-1110/hl1110cupswrapper-GPL_src-3.0.1-1
-> ls -R
.:
brcupsconfig Copying filter PPD
[Code] ....
How do I compile and install it on my computer ? ( Or get the printer working ? )
View 7 Replies
ADVERTISEMENT
Oct 20, 2009
I have Fedora 11 and am trying to install Brother HL-2170W Wireless laser printer. I installed it and used CPUS but cannot print. SELinux is enabled. On Brothers site there is an FAQ about SELinux and CUPS. [URL] I followed these instructions but still cannot print. Jobs get queued. Under Printer properties -> Policies, there is an Enabled checked. For some reason when I check this Enabled box and click Apply, the changes do not take effect. Then Enabled checkbox gets uncheck again.
I cannot even print a test page as its status shows Pending.
View 12 Replies
View Related
Jul 5, 2010
I have a recently purchased Brother HL-3040CN printer that I had been using under Windows XP. I'm hoping to use it on openSUSE 11.2 64-bit. Having consulted SDB:Installing a Printer - openSUSE I ran lpinfo -l -m | grep HL-3040CN as su... evidently this model is not supported.The Brother site Brother Solutions Center : Brother Driver for Linux Distributions seems to suggest maybe there is hope. I am relatively new to Linux.
View 3 Replies
View Related
Jun 25, 2011
I have been printing with this laser printer (connected via LAN) for months without a single glitch, when suddenly today I had to quickly print a document. I could not print it. At first I thought the printer was off, then I double checked it was on. I restarted the CUPS server, reinstalled the printer in CUPS, nothing will work. When I send a print job, (I am using XFCE btw), I see the printer icon in the tasktray and it has a small warning sign.
Opening the print queue, I see "Processing - Printer Warning". In cups, I see nothing unusual. It says (in the printer queue): processing since Sat 25 Jun 2011 10:13:30 AM EDT. I can print a test page FROM the Printer web interface, confirming the printer works. I can print with the other printers. CUPS detects the printer and does not report anything unusual. What is going on with CUPS?
View 8 Replies
View Related
Jan 8, 2010
I am having a Canon 3108B printer But no driver/rpms for my fedora 9. I can going to install fedora 12. Can i download driver for this printer also? if so from Where?
View 1 Replies
View Related
Aug 22, 2010
Anybody else using this printer? I have tried the driver direct from Brother, requires cups and the driver.Both installed, both fail. I read on another forum to try a Brother HCL type and it works, but why?
View 3 Replies
View Related
May 6, 2011
I'm trying to download this driver with my UBUNTU 11.04 but theres so many steps I'm not sure I'm doing it right. I downloaded SUSE but I dont know how to get it to run. I'm also in the process of downloading Cups But I don't know what to do with that either.
View 1 Replies
View Related
Mar 18, 2010
Is there a driver for the Printer Brother HL-2140 to be used with Ubuntu 9.10. and how to install.
View 1 Replies
View Related
Jan 11, 2011
I cannot find a driver for the Brother MFC-490CW printer anywhere. I tried using the CD that came with the printer itself but that doesn�t have any PPD files on there... Apparently they deemed it unthinkable that a Linux user might want to use their equipment.
View 14 Replies
View Related
Jul 22, 2011
Friend got a Brother HL-2130 Printer and couldn't add printer using Yast as the drivers are not found by Yast.
I went to Brother Solutions Center : Brother Driver for Linux Distributions and downloaded the drivers provided by Brother.
rpm -ivh *.rpm
and everything works well.
How could we prompt the developers to update openSUSE so that these working drivers can be added into Yast to benefit future users.
View 2 Replies
View Related
Feb 18, 2010
I do not know much about Ubintu...My bro put it on my computer. I'm trying to connect a new Brother MFC-7340 to the computer but cannot get the drivers to install, as I do not understand how to even check the version of Ubuntu that I have.
View 1 Replies
View Related
Feb 5, 2011
I'm using Debian Squeeze AMD64 gngeo version 0.7
After i ran ./configure
I got these error messages when I ran make
Code:
View 9 Replies
View Related
Mar 16, 2011
I notice sometimes if the page has graphics it either is very slow to print or wont print.Will adding memory help? I was thinking of a 64mb module.
View 5 Replies
View Related
Oct 8, 2015
I am trying to get the QL1060N to print and cut under Jessie.
I used the Ql1060N on wheezy (cups 1.5.3) with the standard Brother driver and the ptouch/foomatic driver of the QL550. They both worked out of the box.
Configuration for Brother QL1060N Driver:
Description:ql1060n
Location:
Driver:Brother QL-1060N CUPS v1.1 (grayscale, 2-sided printing)
Connection:socket://XXX:9100
[Code] ....
On Jessie (cups 1.7.5):
I first tried the standard Brother driver from here: [URL] ....It didn't work at all. When I print, Cups tells me that the job has been completed, even though nothing has been done. Sometimes I also got the error "job canceled, filter failed", but I can't reproduce this error...
The foomatic/ptouch driver for the QL550 prints like it did before, but doesn't cut the lables automatically like it used to in wheezy. (I'm using the same printing file/picture as in wheezy and also the same configuration.)
View 1 Replies
View Related
Feb 26, 2011
I have searched the WEB cannot find a driver, trying to print a document via USB.If I could find the specifics I could write a driver, though I have not done that kind of work for years.
View 5 Replies
View Related
Feb 9, 2011
I would like to know if anybody using Squeeze has gotten the DCP-8065 driver from the Brother website to work. I am running x64 and have followed the directions precisely (ia32-libs, etc.) but still no dice. I have been using the ubuntu version (brother-cups-wrapper-laser & its dependencies) and that works fine. I just want to know if anybody has gotten this to work and what they did that may have been different from the directions given.
View 2 Replies
View Related
Jan 23, 2010
I can post a log file later if needed, I just turned off the laptop in defeat...
View 1 Replies
View Related
Mar 9, 2011
I installed the Nvidia driver for the on board GeForce 7025 / nForce 630a the "Debian way", according to this link Debian Nvidia Howto. The problem is that the only available screen resolutions are 640x480 & 320x240 and I need something more like 1024x768. The driver is installed correctly, or at least is properly recognized, as in Nvidia Xserver settings, GPU0 appears as GeForce 7025 / nForce 630a.
Here's the xorg.conf file.
Code:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
[code]....
..only causes gdm not to start.On my Ubuntu partition, I have working the proprietary Nvidia driver (file: NVIDIA-Linux-x86_64-260.19.36.run), and have had no problems from it at all. I was going to install this same driver onto Debian when I read several pages advising to go the "Debian way".
View 4 Replies
View Related
Oct 16, 2010
I would like to know how to network a HP P1005 Laser Printer that is connect to my desktop with Windows XP SP3 Home, & as well network files & folders to watch it on Ubuntu on my laptop?
View 4 Replies
View Related
Feb 7, 2010
I got a LG notebook R580, and there is no sound at Debian with Kernel 2.6.26-2-amd64, driver snd-hda-intel[URL]
View 5 Replies
View Related
Jul 8, 2009
I installed the new debian_lenny_5.0.1_amd64 x64, i am having a nVidia Geforce 8500 GT 512 RAM display card. I was trying to install the driver using the synaptic package manager. I installed them, but i was not able to use the driver. I don't know where the drivers are installed and how to use it. I checked the xorg.conf , and the nVidia driver is not listed there. how to install them .
View 9 Replies
View Related
May 16, 2010
I'm looking for a low cost mono laser printer that just works under Ubuntu. I know that a general 'rule of thumb' is go with HP, but that doesn't seem to be the case with their low-end mono printers, as they use the XQX Stream Protocol instead of Postscript. The more expensive HP printers appear to work because they use Postscript.
View 3 Replies
View Related
Sep 24, 2010
I am using Lucid 10.04 and don't plan to change until support is dropped. I am looking to buy a multifunction monochromatic laser printer.
I was considering Samsung SCX-4828FN or HP LaserJet M1522NF. Both have network cards and support for Linux, but I am a little leery of the Samsung's support in Lucid. Does anyone have this printer? It seems to me a better choice if it works, because the toner is quite a bit more economical and I print quite a a lot.
My only requirements are all-in-one scanner/printer, economical, network card, proven to work.
View 1 Replies
View Related
Jun 13, 2011
I am using slackware 13 and cups is working OK. i installed the printer HP laser jet 1018 USB printer through localhost:631. it seems installed correctly but when i send test print there is no output.2nd thing i want to share that printer to some other windows machine on network so they can also use that printer
View 2 Replies
View Related
Mar 8, 2011
i am getting problems in order to install my HP laser jet p1006 printer for FC14.
View 15 Replies
View Related
Jan 4, 2010
Can anyone recommend a reliable network laser printer for a small office (it will be used quite often)Actually, it doesn't have to be laser - what's more efficient?Obviously it has to work well with linux.
View 2 Replies
View Related
Oct 18, 2010
Using ubuntu 10.04 a dell 1320 colour laser printer. I have been using a xerox driver for this but it will only printer from the single sheet feeder and no the paper tray. It works fine with XP and windows driver. I know that there is not a dedicated driver for linux but is there one which will work correctly and how do I install it?
View 1 Replies
View Related
Jun 17, 2011
Has anyone installed successfully a Canon LBP3000 laser printer?I would like to make it work under F14 and F15.
View 5 Replies
View Related
Dec 4, 2010
LaserJet Pro CP1525NW. HP website mentions that it is compatible with Linux. However, this particular model cannot be found at Linux Foundation's OpenPrinting Database. As you can see here, there is no mention of HP LaserJet Pro CP1525N which makes me worried. Also, the printer is not listed in HP Linux imaging and printing.
What are your thoughts and do you have experience with this printer? What other Color Laser printer do you recommend? The fact that the that printer's specification on HP website says that it is compatible with Linux, yet it is not listed on HPLIP nor in Openprinting makes me nervious.
View 9 Replies
View Related
Feb 4, 2010
Just purchased new del 1320cn printer and unfortunatly ubuntu doesn't see it. I tried the Foomatic system as well, which does see the printer and identifies it but does not show the model number in the list.
Any help would be really good. My other Del 1110 mono laser worked first time!
If any terminal commands reqd, please could you be kind enough to list them as I get confused using terminal.
distro: ubuntu 9.10
Printer: Del 1320cn Colour Laser Printer
View 9 Replies
View Related
