my keyboard lost it functionality as it was used to be, something went wrong and im not sure what but it seems something wrote those settings to my pc's ROM or something.Since i used the ubuntu and then the layout screwed up, I dont know what else to do as it seems it affected my windows too, i tried to recover to an older version of ubuntu that i had (as in i made a system backup using acronis) with all the things working right but it seems it wont help as the settings saved itself and I dont know where to change it back. im in such a panic as this thing never happen to me before ctrl is right ctrl, right ctrl funtion as the FN key, the whole FN+Fx are wrong
I tried to edit my xorg.conf to try and encourage Debian to handle my joypad better (stop recognising it as a mouse). However, it didn't work and i couldn't get back into X.So, i entered recovery mode and deleted the contents of xorg.conf,got back into X and then edited xorg.conf back to how it was.Right so far so good.Yet, now i cannot use the backlash key in keyboard shortcuts. I have a number of shortcuts set up to incorporate this key and they no longer work, neither in GNOME nor Openbox
I finally upgraded my desktop from 9.10 to 10.04. I do not feel that this was a step forward; a lot of little things just don't work. For example, when shutting down with 9.10, it automatically shuts down in 60 seconds. With 10.04, it waits *forever* for a 2nd mouse click.
The USB drive - there used to be an option to un-mount it without removing it. That's gone now, and I'm guessing that I will find more of these as the days go on. And all the colors have been removed from the panel applets. Not really a functionality issue, but it is a negative to the user experience.
So my question is: How can I restore these features? Is there a configuration somewhere I can edit?
Initial FC12 install worked great, kernel 2.6.31.5-127.fc12.x86_64 allowed radio kill switch functionality Fn-F11 for wlan and Fn-F12 for bluetooth.The last two kernels have broken that functionality.
I (finally!) have Mythtv working under 10.04. I use the Haupaugge DVB-T card with its remote. Whilst setting up the kit this worked OK. When I unplugged the keyboard and mouse the system prior to installing it next to the TV appeared to have stopped responding to the remote. In fact it seems to be responding to a number of the remote keys but not the OK and Go keys which isn't enough to run Mythtv.
I don't think leaving a keyboard & mouse plugged in is going to be domestically acceptable.
Does anyone have any ideas as to how to restore lirc functionality?
Linux-goers. I did some research on this, but I am still fairly new to Linux. In Ubuntu 10.10 (Maverick), I accidentally overwrote my "/bin/bash" file. Dude, using "sudo" with a small typo can work disasters. Bash is now broken in the Terminal (gnome-terminal). Terminal itself still works fine, technically, but bash is still hosed/broken. Here is what I did to try to fix it: Booted from Ubuntu 10.10 live CD. Mounted my Ubuntu partition and manually copied the good/fresh "bash" file onto my hard drive. Verified copy was successful. Didn't help, as you see. Reinstalled "gnome-terminal" using synaptic package manager. Tried to reinstall bash via synaptic, it failed with error, "E: /var/cache/apt/archives/bash_4.1-2ubuntu4_i386.deb: subprocess new pre-removal script returned error exit status 2"
In Terminal, all basic commands work as far as I can tell. ("ls", "pwd", navigation, etc.) Here are some problems:My "username@computername" does not display in the prompt; only the $ sign. Bash keyboard shortcuts such as uparrow and tab do not work. Instead, each inserts a key code. I can't even move the cursor left/right. Aliases (a function of bash and .bashrc) are broken, of course. My sanity level decreases when I use Terminal now. For what it's worth, even with "sudo" I get a "permission denied" error when trying to run Google Chrome! I read something about a ".bashrc" file being a possible problem, but I don't know how to make it work, or the file's proper locations in Ubuntu 10.10. Is there something I can do with a "make" or "apt-get install" command or something?? Could this simply be a permissions problem? Is the link to "/bin/bash", "/bin/sh", or a ".bashrc" file broken? Guide me, oh Linux gurus.
P.S. I always wondered what exactly bash was and how it was different from the basic terminal. LoL, this is an excellent way to demonstrate the difference, and I WANT IT BACK!
I had to disable then re-enable window compositing in Ubuntu 11.04, and now the Super + W expose-like command on the keyboard doesn't work anymore! Is there any way I can re-enable it?
my issue is as my Title "Lost Top Sound Icon & Can't control volume with Keyboard" OS: Ubutnu 9.10 x64 - Karmic Koala Lost the Top Panel Sound Icon, I even go to: System > Preferences > Sound Message Pops Up: Waiting for sound system to respond
Funny thing I do get Ubuntu OS Audio sounds Now as well I lost control of my Volume with my Keyboard, pretty sure it has to do with the same Sound icon in the Top panel that is missing The only way I can control Audio is Manually using: gnome-alsamixer 0.9.7
It sucks big time, because I can't control my Audio when ever I need to mute it or upper/lower it through my keyboard fastly when needed. having to manually opening an application to be able to change/control the Audio volume is a huge hassle for me
I was working on something important in 11.2 and did a "zypper up" in the terminal in the background. I wasn't paying that much attention to it, I believe it was an update to 11.3. After returning to the computer after about one hour the windows were behaving strangely and the machine wasn't very responsive. I decided to reboot. Now at login I have neither mouse nor keyboard. I have switched the keyboard to PS2 model, no difference. If someone could help me with booting to run level 3 from the grub menu perhaps I could change some settings there to make everything work. I really regret doing the update. It would be very important for me to be able to get back in to machine with spending as little time as possible on this. Could I reverse the update? This machine is very important for me and my family for their daily communication, but currently I have very little time to fix this. My quick fix was to install Kubuntu 10.10 so I could resume working, but I would really need to get back in to 11.2.
I have a Slackware install with an NVidia graphics card.It was working ok, but now the graphics screen is unreadable and the keyboard stops working (capslock and numlock lights don't operate) when the graphics display is started.Deleting /etc/X11/xorg.conf allows me to run "startx" and see the icons, but keyboard input is still lost.
I've just update my computer to Ubuntu Lucid and I'm having some problems.After a random time, my mouse and keyboard stop working and I get the following lines on dmesg (I have to get this using a ssh connection):
I tried Linux Mint 8 for awhile and seem to remember that System/Administration/Disk Utility gave a lot more useful information than what is available in Ubuntu. It showed the partitions as being healthy or not and even gave the temperature of the hard drive and if the disk is failing. Is there any way to get this same functionality in my Ubuntu 9.10 configuration?
I've been holding out on the recent few versions of Ubuntu because of the recent changes, so I was just wondering if 10.10 will bring back some of those lost features.
1. Will we see a way to have a customisable login screen?
2. Will there be an option to move the close button as a standard setting?
Is there anything for Ubuntu 10.04 similar to vmware fusion for MAC. I know there is vmware for ubuntu, but what about something with the functionality of Fusion?
I've recently started using Emacs and find switching between different buffers using the menu to be inconvenient. Is there any mode or trick that allows functionalitry like Alt-tab?
Im looking for magnifying glass functionalty for ubuntu. I want to use it for web design: watching icons, borders, spaces, etc. I tried the compiz zoom, enhanced zoom and mynifying box bout all of them make things blurry and I couldn't find the way to make things "sharp". Is there such an option for those plugins or an alternative way to have that functionality?
I installed the NFS functionality into Ubuntu 10.04, hoping to have a home file system. However, mounting it seems to be a challenge. When I mount on the server its self, it works fine. But on other computers. Such as my windows 7 machine, the connection times out. It seems to make the inital connect, then none after that. (The windows 7 machine does have the NFS files installed).
Ubuntu works pretty well on most of the desktop computer (drivers support), the basic functionality like, keyboard, sound card, network card generally works well. But when it comes to laptop computer, really need luck. Some laptop's keyboard works weird, some cannot play music. I am recently thinking of buying a new laptop. Is there any website shows you which brand of laptop recommends which version of linux? or ubuntu works better on which brand of laptop?
I'm rolling out Ubuntu in our call center at the moment and I'd like to disable the 'Delete Panel' functionality, I wana keep things as default as possible.
From what I understand aptitude and apt-get are both valid package management tools and it should not matter which one you use (of course the user interface is different, but the basic functionality is the same). I found something which makes me believe there are differences: I ran aptitude install gnome-themes-more and it did nothing because the package was already installed. Then I ran apt-get install gnome-themes-more just to see the difference, and it also did not install anything, but it marked the package as manually installed.
The I ran again apt-get install gnome-themes-more and this time the package was not marked as manually install (obviously because it's already marked). This makes me believe that aptitude did not mark my package as manually installed (I would have pasted the command output as well, but I don't have it anymore). So, is the core functionality of those tools the same or not?
I used until now apt-get and wonder if I should have used aptitude. I have found some wikis which recommend the usage of aptitude but I could not find out if this reccomendation is based only on the UI improvements or are there also improvements in the core functionality. I'd like some hints from more seasoned debianers about which one to use, or whether it matters. I'm maily using command line, so user interface is not an issue,
I just installed a fresh copy of 9.10. My problem is the way Workspace Switcher 2.28.0 (the default of the installation) with compiz running (I haven't tried without compiz) Old behaviour: (9.04 and 8.10) a) rolling the mouse wheel over a workspace of the workspace switcher means: move to the next or previous workspace b) click on a the representation of a window (a little square) on the the workspace switcher and then drag it to another workspace means: move window to other workspace
In 9.10 the workspace switcher does work (the number of workspace can be configured, Ctl-Alt-left & right arrow, Ctlr-Shiht-Alt-right&left arrow) but the functionality described in a and b is missing.
I've seen many posts about setting up VPN's but my doubt goes further. I just need access to the local network of my office from a Windows XP (which of course is outside the LAN). I would like this PC to have access to the whole LAN, but what I really need is it to access to an Ubuntu Server (e.g. 192.168.0.10). The router is a Netgear DG834, which has a built in VPN functionality. So, is it enough if I set it up? Do I need to install any VPN server in Ubuntu? What if I want to access to another computer in the LAN? Where should I start?
I'm migrating from Windows and obviously I miss some programs that works there, such as Nokia Pc Suite e.g. Then, I've been trying to find out a solution that works on Linux (Ubuntu).There's no this software available for another plataform. Who can help me to find out a solution for READ/SEND messages through computer connected to a Nokia phone, or a program with the same functionality of Nokia Pc Suite?
I used easystroke on ubuntu, and it worked well enough to be functional. I triend opening Xstroke in suse, but it just adds an icon down by the notification panel. right click and left click seem to turn it on and off, but i've yet to find any configuration menu of any kind. I've also found the 'input actions' section of the personal settings menu, but i'm having a hard time making heads or tails of it. Basically, what I need is pretty simple. I have a single application that I would like to add more control functionality through the mouse. I don't even necessarily need gesture control, in fact if i could just make my extra mouse buttons perform specific keyboard commands (F11, ctrl++, etc.) that would be fantastic. If I could set it to do different things on different programs.
an opensource NON-GUI git client (for linux of course) that's really light/small. I just need to it to have the main functionality of a GIT client (downloading project for read only, clone, add, commit)
there are already some posts out there, but it seems to be a systemic problem. i though my internal webcam (gateway usb 2.0 webcam on /dev/video0) was the problem, but now i read that logitechs have got simmilar issues.
dmesg: [ 8.064123] Linux video capture interface: v2.00 [ 8.068361] uvcvideo: Found UVC 1.00 device Gateway USB 2.0 Webcam (04f2:b027) lsusb: Bus 001 Device 002: ID 04f2:b027 Chicony Electronics Co., Ltd Gateway USB 2.0 Webcam
i have got nothing in luvcview, cheese, kopete, or skype i spent hours in the internet to fix this, but whatever i did, didn't help ... has anyone got a solution yet .
It looks like the -t parameter is no longer available when using the shutdown command. What I'm trying to figure out is how to send all the daemons the kill signal, but wait a certain amount of time before actually halting or rebooting. I can't be the only one wanting to do this, but for all the searching I'm doing I can't find an answer.The following only warns, then waits 1 minute before sending the kill signal and immediately halting, correct? Or am I getting this completely wrong?
