I have created some bash programs (scripts). Can they be copyrighted, if yes then is it mandatory to use GPL as bash (the interpreter) is GPL'd or they can be under any license, even close source?
View 9 RepliesQuestion? Where can I find information about copyright?
A real state agent took one of my pictures from facebook to use it for his bussiness. He charges 2.5% for marketing.
Is there any shortcut on keyboard to make this sign: � ? I know that in Office it appears automatically by typing "(c)", but what is about any other application?
View 7 Replies View RelatedI think that here was a misunderstanding between the copyright and the license. In short, only my opinion ( I am not a lawyer), it is not illegal to post links to copyrighted material (as long as the license allows it). If it would be, I had to remove the links in my sig to Slackware, XFCE and zsh. All that software is copyrighted. I can post links to that because the license allows me to spread that software. Even GPL licensed software is copyrighted. But I think that as long as the license is not clear, links to copyrighted software should not be posted at LQ.
View 4 Replies View RelatedI'm looking for the best way to pull some video files off of DVDs onto the desktop. These are not copyright protected. I don't want a program that plays the movie and then make a duplicate like most windows programs these are TOO slow. Also if I could shrink and change the format that would be a huge bonus.
View 1 Replies View RelatedI have been away from Linux in general and Ubuntu since 2006, but now wish to make Linux, and probably the Ubuntu distribution, my main operating system, especially for the Internet. I have been using Open Office since version 1.0, so no training or migration is necessary there. However, I have one challenge with my Ubuntu 9.1 ... movies which play under Windows will not play in Ubuntu. Under Windows Firefox needs Adobe Flash Player 10 to play these videos ... is there some open source software that will give Ubuntu Firefox the same capability?
View 2 Replies View RelatedI have used Universal USB Installer to extract the xubuntu 10.10 iso and install onto a flash drive. I would like to try a live version of xubuntu that boots from a flash drive. When attempting to boot from the flash drive, the screen effectively freezes after displaying the syslinux / ebios copyright message, with a flashing cursor.
Does anyone know a possible cause or solution? Information that may be useful: I am using a 4GB flash drive, formatted as FAT32. I formatted once using the Universal USB Installer, but some files were left on the drive, so I have reformatted it using the option provided by the Windows interface, (and reinstalled xubuntu.)
When I opt to install onto USB with a 2GB persistence file using Universal USB Installer, the installation processes hangs with a dialogue saying there are 0 seconds left to copy, until the dialogue is forcefully shut (and installation appears to be successful). When I select no persistence file, the process does not hang. (I am faced with the same aforementioned problem at boot time, regardless.)
I have not checked the md5sum (though I have no reason to suspect it will fail.) I have downloaded a simple programme which checks a single md5sum against a single file, although I am unsure which file I should check against in the case of xubuntu, and if the md5sum.txt file represents a single md5sum.
I am using Windows Vista on an old Toshiba Satellite. I am new to using linux, and am very unfamiliar with the the setup and installation procedure.
The copyright year in the newest Fedora download shows still 2010. A screenshot has been attached along with this note. Just thought I would bring the same to Fedora Installation Support team.
View 7 Replies View Relatedwhile installing ... Installing python2.4-2.4-1pydotorg.src.rpm
warning: user jafo does not exist - using root
warning: group jafo does not exist - using root
warning: user jafo does not exist - using root
warning: group jafo does not exist - using root
error: Legacy syntax is unsupported: copyright
error: line 55: Unknown tag: Copyright: Modified CNRI Open Source License
Recently I've purchased a Disney's dvd featuring FastPlay. There is also a sign 'copying protection' on it. While it plays smoothly in Windows, I can't even 'see' it in my Ubuntu 10.10, not to mention playing it. What is the cause: FastPlay or copyright protection?
View 1 Replies View RelatedI'm trying to install Ubuntu on a computer with Vista SP2, my BIOS supports booting from a USB drive. Ive used unetbootin and Universal USB installer to setup the ISO on the drive, as well as trying Ubuntu version 10.04 and 9.10. The problem is that during the boot it stops at a line reading "SYSLINUX 3.86 2010-04-01 CBIOS Copyright ...", no error messages, it doesn't appear to be frozen as there is a blinking cursor under this line. The boot performs normally up to this point, it happens when, during a normal boot to vista, it says "boot from CD/DVD" then loads windows.It shouldn't be a hardware issue, the computer is pretty new, and I had an older version of Ubuntu install on it temporarily.
View 1 Replies View RelatedI downloaded Fedora-14-i686-Live-Desktop.iso and used the Fedora liveusb-creator to put this on a 2GB USB stick. Everything seemed to have gone well and it said complete; however, when I try to boot from the USB stick, I get a black screen with a linux copyright notice at the top and it just stays at that screen forever. I tried this on two computers with the same results.
I'd previously tried with Ubuntu and had a similar issue, it would go to a purple (if I remember correctly) Ubuntu screen and it sat that forever.
I have a server im trying to use with clamAV to scan it all and with cron job. it worked fine for few days, sending me emails with reports, i was happy. now i get ERR emails and when running manually i get the follwing message output: Script: clamav-cron v. 0.6 - Copyright 2009, Stefano Stagnaro Scanned: /
[Code]...
I got a problem with terminal, since i'm really a noob with terminal i don't know how to fix it.Everytime i type in a command it shows for example:
-bash: ls: command not found
Even the basic commands don't work... just cd <directory> and those things works
I would like to know how do I print the line # in a script. My requirement is, I have a script which is about ~5000 lines long. If there are any errors happen I just exit. And I would like to add the line # of the script where the error happened.
View 3 Replies View RelatedI create a bash script that writes another bash file. But in the generated bash file I want to write a bash command in the file and not executing it.Here's my bash file:
Code:
#!/bin/bash
cat > ~/generateGridmix2data.sh << END
[code]...
below are the details of my system. I have bash as my current shell, some really common commands aren't working.
Do I need to do a re-installation of bash? Or how do I install a selection of bash commands which I need? (for example a subset of [URL])
Code:
root@sdptfw:~ # uname -a
Linux sdptfw.sdpt.co.za 2.4.36 #1 Tue Jul 22 13:13:24 GMT 2008 i686 i686 i386 GNU/Linux
root@sdptfw:~ # echo $SHELL$
/bin/bash$
[Code]....
simple bash code:
Code:
#!/bin/bash
trap "echo 'you got me'" SIGINT SIGTERM # to trap ctrl+c
echo "Press ctrl+c during 5 sec loop"
for ((i=0;i<5;i++)); do
[Code]...
How come code behaves normally and stops when ctrl+c signal is caught and resumes, but after I use at least one timeout read in the code it looks like, if signal is caught again it doesn't pause the execution but skips the loop. If you remove -t (timeout) option from the read, both loops look the same!
I have a config file that contains:
my.config:
Code:
Now in my bash script, I want to get the output /home/user instead of $HOME once read. So far, I have managed to get the $HOME variable but I can't get it to echo the variable. All I get is the output $HOME.
Here is my parse_cmd script:
Code:
I have written quite a few separate bash & scripts and php scripts that up to now I have run from cron jobs. However I have to estimate how long each takes to run, before running the next and so it probably takes much longer than necessary to run them all. They have to run in order.
Now there are so many I am thinking it would be better to have a master bash script that would run one after the other, but I am not sure how to get the master script to wait before starting to run the next script. Is this possible and is there a command that will make the script wait between bash and php scripts , for them to finish, before running the next?
I have searched and searched and maybe I don't know how to articulate this issue with out just posting the problem I'm having. Every time I bring up a terminal window I get the following "Header"
declare -x COLORTERM="gnome-terminal"
declare -x CPLUS_INCLUDE_PATH="/usr/lib64/qt/include"
declare -x DBUS_SESSION_BUS_ADDRESS="unix:abstract=/tmp/dbus-xSFd6zqrYQ,guid=dc5e07974559da016842742900000090"
declare -x DISPLAY=":0.0"
[Code]...
To be honest I cheated and used the .bashrc / .profile files from Ubuntu and all was working fine for a while now and it seems something changed to cause this... any ideas on why I am getting this? I checked my .bashrc and my /etc/profile and it doesn't look like anything is amiss..
I would like to get the filename (without extension) and the extension separately. The best solution I found so far is:
Let FILE="thefilenameofsomefilesfor_instance.txt"
Code:
NAME=`echo "$FILE" | cut -d'.' -f1`
EXTENSION=`echo "$FILE" | cut -d'.' -f2`
I think it would be better to count the len and remove 3 chars to right to get the extension, but it can be macintosh filenames with have 4 chars for extensions.
I've noticed something, and hoped there was a work around.when I write a simple bash script, and run it, if I close the terminal i ran the bash script inside, the bash script stops. What are the solutions for this? Basically I want to run my bash script and close the terminal, keep the bash script running.
View 6 Replies View RelatedWhat happens when the script executes is that the ssh connection works and parks me at the remote hosts's shell login. Therefore, the "firefox" command refuses to execute. I need to know how to make the "ssh" connection occur, stay open, and go into the background so that the rest of the script can execute.If I could also do this with the "firefox" line so that the entire term window could be closed would also be helpful.
View 3 Replies View RelatedI am trying to write a bash script that sources another bash script. Essentially, I need a few lines to check to see if a certain variable is set. If not, I set it manually, and then source a scripts with that variable in the path. I wrote a test script to try it, but for some reason the last line does not work. Here is what I wrote:
#!/bin/sh
source ~setupdir/setup.shrc #just a test, this line works
echo ${#SETUP} # prints 0 if setup is not set, which it isn't
if [ ${#SETUP} -eq 0 ]
then
SETUP="~setupdir"
fi
echo $SETUP # prints ~setupdir
[Code]...
On one of my servers I see this when I log in. What does this mean and how can I get it to go away? Everything seems to work fine, but none of my other machines give this error.
View 5 Replies View Relatedwhy can't I use bash?
Code:$ bash To run a command as administrator (user "root"), use "sudo <command>". See "man sudo_root" for details. $ /bin/bash To run a command as administrator (user "root"), use "sudo <command>". See "man sudo_root" for details.
I'm trying to use awk in a bash script. The line that is giving me grief is:
Code:
num=633674
x_orign=3000000.0
x_coordinate=$(awk '{if ($1==num) {print $3}}' file.txt
difference=$(echo $x_origin - $x_coordinate | bc -l)
[Code].....
How can I place both these results into a bash variable? Or into an array, etc?
I'm making a script I want to be able to just call (ie, rclick instead of ./rclick) where do I put it?
~/bin?
/bin?
/usr/bin?
Also, how do I pass a variable to the script (rclick 10 will rightclick 10 times) (Found, so simple... $1)Lastly, can I force it to run on CPU2? CPU1 is completley locked up if I run this on it... Or can I make it use less cpu cycles?
I would like to make a bash script that shuts down. Problem is... How am I supposed to do this when shutdown requires sudo and ultimately requiring me enter my password as a response?
I.e.
#/bin/bash
#Do: shutdown at xx : xx time
shutdown 23:45
#done (yea just one line...)
How could I make sure my password is given to the sudo response without manually entering it ever time?
How could one make this script run automatically i.e. on startup every time.