I would like to get the filename (without extension) and the extension separately. The best solution I found so far is:
Let FILE="thefilenameofsomefilesfor_instance.txt"
Code:
NAME=`echo "$FILE" | cut -d'.' -f1`
EXTENSION=`echo "$FILE" | cut -d'.' -f2`
I think it would be better to count the len and remove 3 chars to right to get the extension, but it can be macintosh filenames with have 4 chars for extensions.
I have over 50 files names with spaces in them.
I'm trying to use a for loop as such:
However, when I print the $filename in the script, the script prints out parts of the filename because of the spaces in the file name.
For example, say the file name was Star Quest.php
When the script executes one $filename would be Star and another Quest.php.
How could I account for this? Something like $'filename'
I have a directory with files like this:
Code:
And what I'd like is to have the files renamed like this:
Code:
How could I code it so that it removes the numerical part of the filename (at the beginning), even with different patterns (like the 01 - artist vs the 01-artist)?
i have lots of files with dots insde file name for example:
document.1.is.bigger.doc
resume.version12.doc
10.photo.www.cnn.com.jpg
i want to rename all files in that directory to be the same (with same extention) but convert dots to underscore "_"
how can i do that on bash script / php.
i want to find all files with .h or .c extension and print them on the screen. How can i do it with bash script programming?
View 5 Replies View RelatedI have a directory and sub-directories (4 or 5 depths). There are several type with extension in them (*.mp3, *.wma, *.jpg, etc). I would like to copy the whole directory to another location recursively but only *.mp3 files.
View 11 Replies View RelatedI would like to know how do I print the line # in a script. My requirement is, I have a script which is about ~5000 lines long. If there are any errors happen I just exit. And I would like to add the line # of the script where the error happened.
View 3 Replies View Relatedsimple bash code:
Code:
#!/bin/bash
trap "echo 'you got me'" SIGINT SIGTERM # to trap ctrl+c
echo "Press ctrl+c during 5 sec loop"
for ((i=0;i<5;i++)); do
[Code]...
How come code behaves normally and stops when ctrl+c signal is caught and resumes, but after I use at least one timeout read in the code it looks like, if signal is caught again it doesn't pause the execution but skips the loop. If you remove -t (timeout) option from the read, both loops look the same!
I have a config file that contains:
my.config:
Code:
Now in my bash script, I want to get the output /home/user instead of $HOME once read. So far, I have managed to get the $HOME variable but I can't get it to echo the variable. All I get is the output $HOME.
Here is my parse_cmd script:
Code:
I have written quite a few separate bash & scripts and php scripts that up to now I have run from cron jobs. However I have to estimate how long each takes to run, before running the next and so it probably takes much longer than necessary to run them all. They have to run in order.
Now there are so many I am thinking it would be better to have a master bash script that would run one after the other, but I am not sure how to get the master script to wait before starting to run the next script. Is this possible and is there a command that will make the script wait between bash and php scripts , for them to finish, before running the next?
What I have done wrong with my escaping here:
Code:
The original filename is:
Code:
I need to split a filename into its filename and extension, so I can append a datestamp to the filename. I'm using bash.
View 8 Replies View RelatedI am trying to create scripts to move files over from one directory to an ftp server and there is this one file with spaces that bash is see each word as being a file, here is the variable i am trying to use:
Code: Select allLOCL = '/mnt/cifs/"File name with spaces"/'
cd $LOCL
ls -l
I was wondering if anyone knows how to do this in Bash:
I have quite a few music files which have names like this:
All my music is named "ARTIST - SONGNAME.EXTENTION"
I have been looking for a program or bash script that would fix this automatically, but I can't find anything that will do this. a script laying around?
Tried pyRenamer, and it does a lot of things, except this...
I am trying to write a bash script that sources another bash script. Essentially, I need a few lines to check to see if a certain variable is set. If not, I set it manually, and then source a scripts with that variable in the path. I wrote a test script to try it, but for some reason the last line does not work. Here is what I wrote:
#!/bin/sh
source ~setupdir/setup.shrc #just a test, this line works
echo ${#SETUP} # prints 0 if setup is not set, which it isn't
if [ ${#SETUP} -eq 0 ]
then
SETUP="~setupdir"
fi
echo $SETUP # prints ~setupdir
[Code]...
How to make sure that when I save a pdf file, the file extension .pdf appears in the filename? Its a silly little thing, but annoying. The file browser recognises it afterward as a pdf file though, it opens with document viewer ok.
View 9 Replies View RelatedI am trying to strip the .wav file extension from a file name so that I can pass the result to lame encoder. I started to write a BASH script that looks like this:
Code:
for f in /home/user/wavfiles*; do FILE=basename $f .wav; lame $FILE; done
It doesn't work very well though. For the life of me I can't seem to discover how to use basename in a suitable way for a script like this.
I create a bash script that writes another bash file. But in the generated bash file I want to write a bash command in the file and not executing it.Here's my bash file:
Code:
#!/bin/bash
cat > ~/generateGridmix2data.sh << END
[code]...
below are the details of my system. I have bash as my current shell, some really common commands aren't working.
Do I need to do a re-installation of bash? Or how do I install a selection of bash commands which I need? (for example a subset of [URL])
Code:
root@sdptfw:~ # uname -a
Linux sdptfw.sdpt.co.za 2.4.36 #1 Tue Jul 22 13:13:24 GMT 2008 i686 i686 i386 GNU/Linux
root@sdptfw:~ # echo $SHELL$
/bin/bash$
[Code]....
I got a problem with terminal, since i'm really a noob with terminal i don't know how to fix it.Everytime i type in a command it shows for example:
-bash: ls: command not found
Even the basic commands don't work... just cd <directory> and those things works
I have searched and searched and maybe I don't know how to articulate this issue with out just posting the problem I'm having. Every time I bring up a terminal window I get the following "Header"
declare -x COLORTERM="gnome-terminal"
declare -x CPLUS_INCLUDE_PATH="/usr/lib64/qt/include"
declare -x DBUS_SESSION_BUS_ADDRESS="unix:abstract=/tmp/dbus-xSFd6zqrYQ,guid=dc5e07974559da016842742900000090"
declare -x DISPLAY=":0.0"
[Code]...
To be honest I cheated and used the .bashrc / .profile files from Ubuntu and all was working fine for a while now and it seems something changed to cause this... any ideas on why I am getting this? I checked my .bashrc and my /etc/profile and it doesn't look like anything is amiss..
I need to rename the resulted searched files from a loopI have the following code:
find . -name DOC* | while read i
do
find $i -type f -name '*.txt'
done
basically, I am searching for all txt files inside any folder starting with DOC name.this code is working fine with me.I need to rename those .txt files to .txtOLDOS: Ubuntu 10.4Bash shell
I have beat this enough and don't get what should have been a very simple thing to do. I build a variable;
Code:
CLIST=java,lua,python,php,perl,ruby,tcl
CLIST will be used by another bash script but I need to replace the commas with a space. I
[code]...
Creating script that converts hex to dec. But without using bc calculator or other methods that could convert it in one line. I need to make something like this script that converts dec to hex.
View 1 Replies View RelatedI have a basic awk script that can read a file named 'server_info' and output to the screen which fax lines are not working. Now I want to make the script execute commands instead of printing to the screen but I am having trouble... This is better explained by my code below:
test.sh Code: #!/usr/bin/awk -f
#
#The name of this script is test.sh
[code]....
Distro: Centos 5, PHP 5I have done a bit research on running bash commands from php and there was little success. This is my relevant php script
<?php
echo exec('pwd');
?>
[code]...
I am trying to build a function inside a script.
Code:
#!/bin/sh
#System commands and other configurable.
IPT=/sbin/iptables
IP6T=/sbin/ip6tables
IPST=/usr/sbin/ipset
MODP=/sbin/modprobe
GET=/usr/bin/wget
INT_NET=192.168.1.0/24 .....
I can find lots of tutorials in how to use if, then, else. However, how do I define a variable inside the function?
SEE>>
Code:
for c in $ISO
Also, am I using the 'test' command correctly( -/+ week as valid test)?
I'm somewhere between Novice and I have no idea what I'm doing with bash scripts. I'm writing a script to deploy images using partimage on my company's desktops, and while I have just about everything else figured out I have one issue left.Each of our 4 sites that will be using this disc will have a deployment server due to the fact that our sites have dedicated point to point links that our business traffic is conducted on. I need to be able to determine what site I'm at based onubnet and set a variable based on this determination. What I don't know is how to get the IP address in to an if statement, and properly determine subnet. For example:
192.168.1.0/16 - 192.168.7.0/16 need to use DEPLSERV01
192.168.8.0/16 - 192.168.16.0/16 use DEPLSERV02
192.168.17.0/16 - 192.168.24.0/16 use DEPLSERV03
I know it's a very silly question but could someone please explain the difference between "/bin/bash" & "/bin/sh" I was under the impression that both are same but following output on my Ubuntu 8.10 is making me raise my eyebrows.
Quote:
parag@station3:~$ ls -l /bin/bash ; ls -l /bin/sh
-rwxr-xr-x 1 root root 725136 2008-05-13 00:18 /bin/bash
lrwxrwxrwx 1 root root 4 2008-12-03 21:42 /bin/sh -> dash
parag@station3:~$
i want to run bash script on website.i still have to choose between unix hosting and windows hosting. my web hosting service offer Own Cgi - Bin PHP,ASP,MYSQL,MSSQL, and script schedule(cronejob). This is script
#!/bin/bash
#Store arguments from bash command line
fight=$1
support=$2
msg=rmsg
[Code]....