What happened to the cloud icon. Also using sys>prefs>ubuntuone takes me to the login page. It offers to add the machine but then this page pops up with these errors.
View 5 RepliesI'm setting up a PDC Samba server on centos5.4. All tasks are well done but on adding new machine in my domain I have a this error message: Error occurred when attempt to join your machine in domain "invalid user name".
samba.log
Code:
[2010/07/05 12:34:55, 2] smbd/sesssetup.c:setup_new_vc_session(1212)
setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2010/07/05 12:34:55, 2] smbd/sesssetup.c:setup_new_vc_session(1212)
setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2010/07/05 12:34:55, 2] auth/auth.c:check_ntlm_password(309)
check_ntlm_password: authentication for user [root] -> [root] -> [root] succeeded
[2010/07/05 12:34:55, 2] rpc_server/srv_samr_nt.c:_samr_lookup_domain(2919)
Returning domain sid for domain RAPHAELLO -> S-1-5-21-3852106609-489253481-401883016
smb.conf .....
I think that the machine account is missed or miss matched.
I'd like to have a notification icon popup when a new email message comes in. I find that I need to keep the Evolution window open to see the popup notifier, which kinda defeats the purpose of being notified when you've already opened the program and can see the message right there.
View 1 Replies View RelatedI've heard that all one needs to do to host a website is to install apache2 and then create my own webpages in /var/www. Like I could start out putting a file "index.html" in /var/www and it would show up on the web.If this is true, what would my website address be on the web?
View 6 Replies View RelatedIs there a way to send messages from Ubuntu to windows xp computer, like NET SEND, in Windows network enviroment?
View 1 Replies View RelatedI have set up a 5.5 installation on a Virtual box VM. The Virtualbox (not for the VM) network preferences have DHCP Server disabled and IPV address and the network mask I believe are valid for my home network. My VM is up and running and it has gotten an IP address from my home router and everything seems fine. From any machine in my house I can ssh into my centos installation. I went ahead and started up the httpd service and the website is up. IOW, I can see it from my centos box - when I navigate to http://localhost However, I cannot see it from any other machine on the net. The IP address of the centos bos is 192.168.0.141. From the centos I can do a ttp://192.168.0.141 and see the Apache 2 test Page. I can see that from anywhere else. Although I can ssh to that machine.
View 4 Replies View RelatedI'm a KDE3 user who just upgraded to 11.3/KDE4 and is still trying to learn the new way of doing things, so please bear with me if I've overlooked something obvious. I've managed to mostly get my desktop the way I want it, except for one problem: I want to add a submenu to the panel, with an appropriate icon.
According to Bug 189583 - Ability to add submenu "like editors" to kicker panel from classic menu this capability was added over a year ago, so I should be able to just right-click on any submenu and the option to add the submenu to the panel or desktop should pop up. Except for me, it doesn't. Right-clicking on a submenu just selects the first item in the submenu instead of bringing up the context menu. I've tried both the classic and kickoff menus, and the same thing happens.
The bug report does mention it is also possible to add a submenu to the panel from Dolphin by going to applications:/ and dragging the folder to the panel. This does add the submenu, but the icon displayed on the panel is the question mark icon, and there seems to be no way to change it. Besides being ugly, I need different icons to tell different submenus apart.
Looking through syslog, I see some peculiar messages that occur when booting my Debian machine up. Can anyone explain to me, why it seams to think my filesystem is read only, and what do the other messages mean? Is there anything I need to start worrying about?
Feb 26 08:48:21 chris-desktop kernel: [ 4.082355] EXT3-fs (sdb3): recovery required on readonly filesystem
Feb 26 08:48:21 chris-desktop kernel: [ 4.082361] EXT3-fs (sdb3): write access will be enabled during recovery
[code]....
A couple of weeks ago, I completed a system upgrade that was motivated because I have to deploy Windows 7. I have to deploy it because my Windows development environment is getting very long in the tooth, and I have to become current again for a project of mine that is underway. So, yesterday, I deployed Windows 7 Professional in VMware 7 hosted on Mandriva 2010. With my new upgrade, I have a very capable quad-core athlon system with an NVidia 240GT video card, and it runs Aero quite nicely in the virtual machine. I do have to say that Windows 7 looks nice and isn't too annoying to use, except - of course - when I need to dig into it to change some setting or another.
Now, on Windows, for many years I have used Zone Alarm firewall rather than the Windows firewall, because ZA monitors and controls outgoing connections. I have used this on both my Win2K development system (virtual machine) AND my Win XP laptop to keep microsoft applications (notably media player) from calling the mother ship when I didn't think they should. It has worked well. So one of my first actions was to download the newest copy of ZA free firewall and deploy it on Windows 7, after disabling the Windows firewall. Well guess what. ZA doesn't stop Windows from calling the mother ship. I have all settings on ZA set to "ask" before allowing anything to contact the net, but I've been playing with some multimedia things and the microsoft software has been talking on the internet as happy as you please, and ZA hasn't asked me a single time if it could do so.
Of course, when I ran a few tests with ping and tracert, ZA asked me. Also, I had to fiddle with ZA settings a bit to get the Windows 7 to successfully talk to my LAN. But when Windows 7 wants to talk to microsoft, it talks regardless of what ZA says. Well, when you get down to it, this is one reason I have Windows running in a VM...I WILL be in control, regardless of what microsoft wants. Does anyone know of a tool that I could use from Mandriva to prevent a VMware client from talking to a website? I'd like to be able to easily enable/disable it so that I can let Win 7 talk to microsoft when I need for it to do so, but no other time. I'm using bridged networking in VMware so all my virtual machines have their own IP addresses, but of course all of them (as well as my host Linux system) go through the same network adapter. It seems to me that iptables would have to work for this, but I'm not at all sure how to set it up to do it given the bridge.
I'm having trouble getting GRUB2 to pick it up in the boot menu. to clarify: Does every OS need a copy of grub? My impression was that you have one copy, and it takes care of all the OSes you have. I got to the point in my Gentoo install where it asked me to install grub, but I didn't want to mess up my boot record or anything (which there is the potential for as I'm in unfamiliar territory). I switched over to ubuntu and tried
[Code]..
I have a running PDC with Samba and LDAP. But when I want to join the Domain with an XP Pro Client I just get following error message.
"A Device connected to the System is not working".
Currently I'm running a smaba on slackware 13.1 with a 1TB Hard drive for dumpng files rather than sharing. My partition table is as follows:
#####################################################################
/dev/sdb2 swap swap defaults 0 0
/dev/sdb1 / ext4 defaults 1 1
/dev/sdb3 /home ext4 defaults 1 2
[code]....
Now that i need to add 2 more 1TB hard drives and I want to stripe these two drives to make one partition for large space.
Whenever I put ssh into remote machine am getting the following messages. Write Failed: Broken Pipe (After logged into that machine ) Read Socket Failed: Connection reset by peer (While trying to log in ) Also known_hosts file is changed frequently.
View 1 Replies View RelatedHow do I reconfigure grub when adding a disk to a machine where both disks have their own MBRs? I have two volumes:Disk 1 - actually mirrored RAID-1 drives managed by ICH9R on the motherboard Disk 2 - a single drive managed by ICH9R on the motherboard, but without RAID. Disk 1 is the "old" disk containing WinXP on the first partition. The MBR of Disk 1 was created by Windows. Disk 2 was built on the machine while Disk1 was unplugged. Disk2 has Win7 on /dev/sda1 and Fedora 12 on /dev/sda7. Obviously, Disk 2 has grub installed on its own MBR.
When I plug-in both Disk 1 and Disk 2 at the same time, I would like to reconfigure grub so that it gives me the option to switch between WinXP on Disk 1, Fedora on Disk 2 and Win7 on Disk 2. (I may also want to install Ubuntu on another partition of Disk 1, but that's a separate issue.) The problem is that when I plug in Disk 1, Disk 1 becomes /dev/dm-0 and Disk 2 becomes /dev/sdc (instead of /dev/sda as when I installed it). (I don't think I can switch this order because I'm worried that Windows will become confused.) So, how do I keep all partitions the same and get them all to work from grub? On which MBR will I need to install grub? How do I configure it to see all 3-4 of my operating systems? Do I fix grub from the Fedora LiveCD?
I'm only partially new to Linux. I'm running Fedora 11. I've just set up two machines, I thought to be identical. Evidently I missed something. I had some problems getting the network started on the second machine, and I must have forgotten a name change somewhere. Anyway, after doing lot's of comparisons between the boxes, editing and renaming and re-linking the ifcfg-GigaStorey file, they are both functioning. The problem is that whenever I start or restart the network on box 2, it reports the following error:
Bringing up interface GigaStorey: RTNETLINK answers: File exists
Error adding address 192.168.1.6 for eth0.
[ OK ]
The file ifcfg-GigaStorey is linked in the following directories
/etc/sysconfig/network-scripts
/etc/sysconfig/networking/devices
code....
Like I said, it's not super critical, just annoying. The networking comes up ok, but the error is puzzling. I figure if I learn what this problem is I'll be one step closer to my Linux beanee.
Can someone please help me? I'm a noob and I've never had a problem like this before.Ever since I installed on this system every time I start up I get a bunch of error windows.I tried pressing the "Don't Delete" or "Reload" buttons as appropriate. Then the applets sometimes reappear and sometimes they don't. Please help a noob!
View 2 Replies View RelatedI just upgraded to 10.04 through the Update Manager. During the updated however I got an error telling me that it was unable to install something. Sorry, I can't remember what it was; it didn't stop the updated so I assumed it wasn't that important. Anyways, I don't know if this is because of that error, but during the boot process and when shutting the computer I get console messages. When I boot it tells me that "mounting none on /dev failed No such device" and when I shut down I get these messages.I see this was asked before and that it isn't a big issue, but I'd still like to solve it. The problem is that I'm pretty new to Ubuntu and Linux in general I don't know how to follow the very general instructions given in that thread.
View 2 Replies View RelatedProblem-cannot mount 2 other samba computers on my ubuntu 10.04 via 'sudo mountall'. Additionally I now get Firefox/Thunderbird error messages as listed below. Had no problems with ubuntu UNTIL I attempted install of VirtualBox running WinXP client in my Ubuntu host. VirtualBox seemed to install ok but upon startup of WinXP client all I got was a black screen. To close it I had to do "Power Off" which VBox manual says is like a hard power off and is to be avoided. So I guess it's like I crashed XP within Ubuntu.
Now - ubuntu boots ok except will not auto mount other samba connected computers. Manually running 'sudo mountall' in terminal gives --
p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; } swapon: /dev/disk/by-uuid/24c4c591-47ec-44f1-ac52-c0e2f5850c18: swapon failed: Device or resource busy
mountall: swapon /dev/disk/by-uuid/24c4c591-47ec-44f1-ac52-c0e2f5850c18 [2235] terminated with status 255
mountall: Problem activating swap: /dev/disk/by-uuid/24c4c591-47ec-44f1-ac52-c0e2f5850c18
retrying with upper case share name
mount error(6): No such device or address
Refer to the mount.cifs( manual page (e.g. man mount.cifs)
mountall: mount /media/samba_share [2239] terminated with status 32
Additionally I now get these warning messages when Firefox and Thunderbird start. (They do start and seem to work fine.)--
Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Server ping error: IDLmg.org/CORBA/COMM_FAILURE:1.0)
p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; } What I've tried-
1) fstab UUID matches error UUID above and matches UUID from blkid command:
fstab =#Entry for /dev/sdc2 :
UUID=24c4c591-47ec-44f1-ac52-c0e2f5850c18 none swap sw 0 0
p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; }
blkid = /dev/sdc2: UUID="24c4c591-47ec-44f1-ac52-c0e2f5850c18" TYPE="swap"
2) Reinstalled mountall from synaptic pkg manager; did not try to remove mountall and reinstall. To remove, removes LOTS of other packages from system - not brave enough to do that (yet).
3) Ran fsck on swap partition as below. Swap not found. (that confuses me.)p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; } john@johndesk:~$ fsck /dev/sdc2
fsck from util-linux-ng 2.17.2
fsck: fsck.swap: not found
fsck: Error 2 while executing fsck.swap for /dev/sdc2
p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; } 4) deleted all the files in ~/.dbus/session-bus. Ubuntu just rebuilds the same file back.
I have Ubuntu 9.10. The batter drained several days ago, and now when I attempt to boot I simply get a string of indecipherable error messages which last for about 5 minutes, and the screen then goes completely black. I am not able to even get to the login screen. Windows 7 Starter boots fine, so it's definitely a software issue. Any solutions short of completely reinstalling? I really don't want to lose all of my data.
View 2 Replies View RelatedWhy is it that I kept getting error messages that basically were saying that could not connect to the Ubuntu servers to do download of updates to Ubuntu that is until I switched to the MAIN ubuntu server at which point it worked fine.I tried several of the Ubuntu servers other than the MAIN server and kept getting error messages. Is there some problem with those other servers ?
View 1 Replies View RelatedI just installed Natty on my laptop. It has SSD drive, so to align the file system to the physical block size properly I created the partitions manually. After the installation it only boots to the GRUB recovery console, so I tried re-installing GRUB from Live CD by:
Code:
sudo mount /dev/sda1 /mnt
sudo grub-install --root-directory=/mnt /dev/sda
It now boots to the system but always shows the following error messages instead of the GRUB menu on every boot:
Code:
error: file not found.
error: file not found.
error: no suitable mode found.
error: no video mode activated.
error: file not found.
error: file not found.
I suspect that I've missed out something during the installation, since SSD drives seem to need some more attention.
I am trying to install ubuntu on my old laptops but dis message keep coming up on all code...
View 5 Replies View RelatedI'm not sure when this occurred, but it happened either when I was trying to install the new gnome-shell, or after installing kbuntu. In any event, when I try to boot Ubuntu 10.04, I get the login screen where I enter my username/password. After doing so, I get the following error messages (in this order). I should note that add the login screen, I have the option boot gnome, kde, failsafe gnome, etc. I tried all the options with the same result:
"Cannot open consolekit session: unable to open session: failed to execute to program /lib/dbus-daemon-launch-helper:success"
"Cannot enter home directory. Using /"
"Could not duplicate ICEauthority file/.Iceauthority."
I have a CLEVO laptop and it currently has Windows 7 installed. I now want to create a separate partition to install Ubunutu 9.10 64bit. I attempted to install this and the install part worked fine but as soon as I rebooted all I seem to be getting after the BIOS is 'grub loading'. I get no other error messages and am stumped on what the problem is. It also meant I couldnt load windows either but I fixed this by loading the windows cd, running repair and then fixing the MBR which another thread mentioned. Once this was done windows loading up ok. I have checked nearly every setting and it has made no difference. I tried reinstalling 9.10 but came up with the same problem. I am not sure what I did in Windows may have caused it. I have a 320gb drive and I shrunk it using disk management as I know the ubuntu will see this free space and install the OS onto it. Should I have left this and let 9.10 create some space automatically during install?
View 1 Replies View Relatedwe're running Apache/2.2.11 (Ubuntu) and trying to set up custom error messages using an .htaccess file that looks like this
[Code]...
When I save this to var/www/ it has no effect (tested on another server but using a shared hosting package it works fine).
I have a LAMP installation for learning php and mysql. My online trainer pointed out that we always get a white screen when the php is wrong, when we should get error messages that say which line in the code is wrong etc.
I recently reinstalled mysql so it is the latest version from the repositories for Ubuntu 10.04.2 LTS.
Is there a way to make error messages show up?
I went to visit a website that I frequent and firefox through a error that basically said that the internet connection might be being tampered with and that the website was not authenticated. Meaning someone might be trying to load a fake website into my browser and impersonate the website to give me viruses or something.It's a website I frequent. Also the website doesn't have the www. in the url.[URL]..
View 9 Replies View RelatedWhat do these error messages mean.
View 9 Replies View RelatedJust bought a brand new Acer Aspire 5745G, straight away I wanted to install Ubuntu 10.10, I stuck in the cd and rebooted the new laptop that currently only seemed to have Linpus Linux, I then got masses of error messages saying something such as cannot run var/ etc etc and then
:cannot touch 'var/lock/subsys/local': input/output error
and then...
EXT2-fs error (device sda1) : ext2_lookup: deleted inode referenced (lots of numbers here)
It does this for many, many lines then sites there for ages doing nothing and wont allow me to type any commands ( I dont know any command really apart from 'reboot') and then finally after 5 mins or so shows the command prompt [root@localhost /]# but I cant do anything from here.
I've done some searches and found this thread:
url
but startx and system-cofig-display dont work and just says bad commands.
Ive also tried changing the settings so it always reboots from dvd, same problem, made a USB ubuntu start up, forced booting from usb, same again.
I'm trying to install ubuntu 9.10 on a new Dell studio 1535. Since I have 4GB of RAM I went with the 64bit version. I can get to the menu where I select to check disk, install, try without changing etc... However when I tried to check the disc integrity I saw the Ubuntu logo for about ten minutes and then let it sit for another 20 minutes, and all I saw was a blank screen. I then tried making another CD and came up with the same results. I then tried to install and at first it was like before, but then i started getting different error messages the majority had the form: [ 771.744543] Buffer I/O error on device sr0, logical block 337015another looked like:[ 1244.029631] end_request: I/O error, dev sr0 sector 673592a few said something about SQUASHFS.I have tried three different CD's I looked at the hash and they matched up so the file is fine. I downloaded the 32bit version and I'm going to try that just to see if it works.
View 1 Replies View Related