Ubuntu Installation :: Getting Error Messages / Resolve This?
May 12, 2011I am trying to install ubuntu on my old laptops but dis message keep coming up on all code...
View 5 Replies
ADVERTISEMENT
Ubuntu Installation :: Live CD Instalation Gives Stange Error Messages?
Apr 29, 2010I'm trying to install ubuntu 9.10 on a new Dell studio 1535. Since I have 4GB of RAM I went with the 64bit version. I can get to the menu where I select to check disk, install, try without changing etc... However when I tried to check the disc integrity I saw the Ubuntu logo for about ten minutes and then let it sit for another 20 minutes, and all I saw was a blank screen. I then tried making another CD and came up with the same results. I then tried to install and at first it was like before, but then i started getting different error messages the majority had the form: [ 771.744543] Buffer I/O error on device sr0, logical block 337015another looked like:[ 1244.029631] end_request: I/O error, dev sr0 sector 673592a few said something about SQUASHFS.I have tried three different CD's I looked at the hash and they matched up so the file is fine. I downloaded the 32bit version and I'm going to try that just to see if it works.
View 1 Replies View RelatedUbuntu Installation :: Will Not Boot, , Multiple Error Messages Showed Up?
Jan 2, 2011I installed ubuntu with the windows installer. while installing in windows, multiple error messages showed up, but installation still proceeded.it rebooted, and ubuntu finished installation.on the next reboot,when i chose ubuntu from the windows boot manager, it loaded grub.however,there was no option for booting ubuntu in grub, and you are forced to go back to the windows boot manager.
View 2 Replies View RelatedUbuntu Installation :: 11.04 Partial Install, Error Messages Not For Novice
Apr 29, 2011Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade:
E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. I wanted to attach the log files; YOUR FORUM RULES WOULD NOT ALLOW ME TO AS IT SAID FILES TOO LONG!
Red Hat / Fedora :: Increase Detail Of Messages Logfile To Help Resolve A Intermittent Crash?
Mar 29, 2010My server is running Red Hat 4.1.2-44.I am having an issue with it hanging (website doesn't respond, can't connect via SSH (it's a remote server)) after 4am on every 3rd Sunday or so.A reboot is required to get the server responding again.I have checked every logfile I can find and found nothing that helps me. The thing I have noticed is that some of these log files start afresh after the reboot so my initial thoughts are that it is a logrotate issue or something similar.
The last activity I can find before the reboot (at 8:32) is in the logfile /var/log/cron:
Mar 28 04:22:01 crond[9356]: (root) CMD (run-parts /etc/cron.weekly)
Mar 29 08:32:39 crond[3884]: (CRON) STARTUP (V5.0)
[code]....
Ubuntu Installation :: Error "mount Error: Could Not Resolve Address For Servername: No Address Associated With Hostname
Jul 14, 2011This morning it would not boot; when I tried to wake up the system, it gave me a bunch of errors, the last ones being as follows: "mount error: could not resolve address for servername: No address associated with hostname mountall: mount /media/shares [1402] terminated with status 1" I am writing this in Win 7 since I lost ubuntu. I am using ubuntu 11.04.
View 2 Replies View RelatedUbuntu Installation :: Update Manager Gives Error / Resolve This?
Jul 2, 2011When i open update manager i get an error, i have attached the screenshot of the error.
View 4 Replies View RelatedUbuntu Installation :: GRUB Geom Error After 10.04 Upgrade / Resolve This?
May 22, 2010I upgraded from 9.10 to 10.04. Previously, I had a dual booting system where GRUB allowed me to boot 9.10 or WinXP. I have two hard drives - an 80 GB drive with XP and a 1 TB drive with Ubuntu.
During the upgrade I chose to upgrade my GRUB version. I only selected to install grub on the Ubuntu drive. I didn't work - I couldn't even get GRUB to load. It just gave the error: the symbol 'grub_puts_' not found.
So I reconfigured GRUB and installed it on both drives. Now GRUB loads and I can boot 10.04 just fine, but I can no longer boot XP.
What command should I run to give you a glimpse of my system? Would that help diagnose this?
Ubuntu Installation :: Error Getting Sudo Yum Update To Work / Resolve This?
Jul 12, 2010I'm having a problem with this command: sudo yum update
I get the error: "Loaded plugins: presto refresh - packagekit
error:no such table: packages.
I created a group using vi /etc/sudoers
saved it using :wq!
but can't get it to work.
Fedora Installation :: YUM Error Couldn't Resolve Host Name
Dec 19, 2009i get the following error when i try to install autoten: root@Tex dan]# rpm -Uvh [URL]... curl: (6) Couldn't resolve host 'dnmouse.org'
error: skipping [URL]... - transfer failed from reading other posts, it sounds like a dns error, but i don't know what to do to fix it.
Ubuntu Installation :: Update - Current Packages List In My Synaptic - Got Error Messages About Unresolved Gpg Keys
Dec 22, 2010When I tried to upgrade (update) current packages list in my synaptic I got error messages about unresolved gpg keys as following:
Code:
How I can get all missed keys for completing update process?
Debian Installation :: Can't Install From CD (isolinux: Disk Error 32) / Resolve It?
Dec 30, 2010I'm getting a bit tierd of linux right now.. I can't get the CD, with netinstall on, to start.
I've tried different harddrives and burned it several times at different speed and so on. I've tried to just i386 and amd64, both gives the same error:
isolinux: Disk error 32, AX = 42B0, driver 9F
The harddrives that I got is small 10-80 gb, so they are a bit old.. but they worked the last time I've tried to install (until I got a grub loading error)
I'm not sure what to do at all. Tried to search on google and here without finding something
Ubuntu Installation :: Update - Error - PkgProblemResolver:Resolve Generated Breaks - This May Be Caused By Held Packages
Oct 10, 2010I'm trying to update my Ubuntu 10.04 to 10.10... But I get this error message:pkgProblemResolver:Resolve generated breaks, this may be caused by held packages
I tried to disable all the repositories, and also "sudo apt-get -f"... But still having this error message...
Ubuntu Installation :: Error Messages On Updates: "Not All Changes Succeeded."?
Sep 25, 2010When I do the routine updates, which come every few day, I get the following message.(Please see the attached image.)
View 3 Replies View RelatedUbuntu Installation :: "Boot Error" Booting From Live USB / Resolve This?
Nov 27, 2010I have intel motherboard(d102ggc2) and 4Gb flash drive.
I've created live USB using usb-creator-gtk(ubuntu 10.04)
There is no option "all fixed disks" in BIOS settings
(http://ubuntuforums.org/showthread.php?t=1616610)
Drive is formatted into FAT32 using GParted
(http://ubuntuforums.org/showthread.php?t=1167803)
Target
I'm tying to install ubuntu 10.10 or 10.04
Problem
I get "Boot error" when booting using live USB.
There are only two words(please let me know if i can get any other logs).
Issue is not reproducible on other env(hp625 and other desktop).
Ubuntu :: Error Messages About Applets / Won't Appear After Startup
May 29, 2010Can someone please help me? I'm a noob and I've never had a problem like this before.Ever since I installed on this system every time I start up I get a bunch of error windows.I tried pressing the "Don't Delete" or "Reload" buttons as appropriate. Then the applets sometimes reappear and sometimes they don't. Please help a noob!
View 2 Replies View RelatedUbuntu :: Error Messages At Boot-time?
Jul 1, 2010I just upgraded to 10.04 through the Update Manager. During the updated however I got an error telling me that it was unable to install something. Sorry, I can't remember what it was; it didn't stop the updated so I assumed it wasn't that important. Anyways, I don't know if this is because of that error, but during the boot process and when shutting the computer I get console messages. When I boot it tells me that "mounting none on /dev failed No such device" and when I shut down I get these messages.I see this was asked before and that it isn't a big issue, but I'd still like to solve it. The problem is that I'm pretty new to Ubuntu and Linux in general I don't know how to follow the very general instructions given in that thread.
View 2 Replies View RelatedUbuntu :: 10.04 - Getting Firefox / Thunderbird Error Messages
Nov 10, 2010Problem-cannot mount 2 other samba computers on my ubuntu 10.04 via 'sudo mountall'. Additionally I now get Firefox/Thunderbird error messages as listed below. Had no problems with ubuntu UNTIL I attempted install of VirtualBox running WinXP client in my Ubuntu host. VirtualBox seemed to install ok but upon startup of WinXP client all I got was a black screen. To close it I had to do "Power Off" which VBox manual says is like a hard power off and is to be avoided. So I guess it's like I crashed XP within Ubuntu.
Now - ubuntu boots ok except will not auto mount other samba connected computers. Manually running 'sudo mountall' in terminal gives --
p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; } swapon: /dev/disk/by-uuid/24c4c591-47ec-44f1-ac52-c0e2f5850c18: swapon failed: Device or resource busy
mountall: swapon /dev/disk/by-uuid/24c4c591-47ec-44f1-ac52-c0e2f5850c18 [2235] terminated with status 255
mountall: Problem activating swap: /dev/disk/by-uuid/24c4c591-47ec-44f1-ac52-c0e2f5850c18
retrying with upper case share name
mount error(6): No such device or address
Refer to the mount.cifs( manual page (e.g. man mount.cifs)
mountall: mount /media/samba_share [2239] terminated with status 32
Additionally I now get these warning messages when Firefox and Thunderbird start. (They do start and seem to work fine.)--
Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Server ping error: IDLmg.org/CORBA/COMM_FAILURE:1.0)
p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; } What I've tried-
1) fstab UUID matches error UUID above and matches UUID from blkid command:
fstab =#Entry for /dev/sdc2 :
UUID=24c4c591-47ec-44f1-ac52-c0e2f5850c18 none swap sw 0 0
p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; }
blkid = /dev/sdc2: UUID="24c4c591-47ec-44f1-ac52-c0e2f5850c18" TYPE="swap"
2) Reinstalled mountall from synaptic pkg manager; did not try to remove mountall and reinstall. To remove, removes LOTS of other packages from system - not brave enough to do that (yet).
3) Ran fsck on swap partition as below. Swap not found. (that confuses me.)p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; } john@johndesk:~$ fsck /dev/sdc2
fsck from util-linux-ng 2.17.2
fsck: fsck.swap: not found
fsck: Error 2 while executing fsck.swap for /dev/sdc2
p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; } 4) deleted all the files in ~/.dbus/session-bus. Ubuntu just rebuilds the same file back.
Ubuntu :: Error Messages When Attempting To Boot 9.10
Dec 29, 2010I have Ubuntu 9.10. The batter drained several days ago, and now when I attempt to boot I simply get a string of indecipherable error messages which last for about 5 minutes, and the screen then goes completely black. I am not able to even get to the login screen. Windows 7 Starter boots fine, so it's definitely a software issue. Any solutions short of completely reinstalling? I really don't want to lose all of my data.
View 2 Replies View RelatedUbuntu :: Error Messages When Trying To Download Updates?
Mar 1, 2011Why is it that I kept getting error messages that basically were saying that could not connect to the Ubuntu servers to do download of updates to Ubuntu that is until I switched to the MAIN ubuntu server at which point it worked fine.I tried several of the Ubuntu servers other than the MAIN server and kept getting error messages. Is there some problem with those other servers ?
View 1 Replies View RelatedUbuntu :: Several Grub Error Messages On Startup
May 1, 2011I just installed Natty on my laptop. It has SSD drive, so to align the file system to the physical block size properly I created the partitions manually. After the installation it only boots to the GRUB recovery console, so I tried re-installing GRUB from Live CD by:
Code:
sudo mount /dev/sda1 /mnt
sudo grub-install --root-directory=/mnt /dev/sda
It now boots to the system but always shows the following error messages instead of the GRUB menu on every boot:
Code:
error: file not found.
error: file not found.
error: no suitable mode found.
error: no video mode activated.
error: file not found.
error: file not found.
I suspect that I've missed out something during the installation, since SSD drives seem to need some more attention.
Software :: Error Messages When Booting Into Ubuntu?
Jun 20, 2011I'm not sure when this occurred, but it happened either when I was trying to install the new gnome-shell, or after installing kbuntu. In any event, when I try to boot Ubuntu 10.04, I get the login screen where I enter my username/password. After doing so, I get the following error messages (in this order). I should note that add the login screen, I have the option boot gnome, kde, failsafe gnome, etc. I tried all the options with the same result:
"Cannot open consolekit session: unable to open session: failed to execute to program /lib/dbus-daemon-launch-helper:success"
"Cannot enter home directory. Using /"
"Could not duplicate ICEauthority file/.Iceauthority."
Ubuntu :: 'grub Loading' And No Other Error Messages
Mar 19, 2010I have a CLEVO laptop and it currently has Windows 7 installed. I now want to create a separate partition to install Ubunutu 9.10 64bit. I attempted to install this and the install part worked fine but as soon as I rebooted all I seem to be getting after the BIOS is 'grub loading'. I get no other error messages and am stumped on what the problem is. It also meant I couldnt load windows either but I fixed this by loading the windows cd, running repair and then fixing the MBR which another thread mentioned. Once this was done windows loading up ok. I have checked nearly every setting and it has made no difference. I tried reinstalling 9.10 but came up with the same problem. I am not sure what I did in Windows may have caused it. I have a 320gb drive and I shrunk it using disk management as I know the ubuntu will see this free space and install the OS onto it. Should I have left this and let 9.10 create some space automatically during install?
View 1 Replies View RelatedUbuntu :: Set Up Custom Error Messages Using An .htaccess File
Dec 10, 2010we're running Apache/2.2.11 (Ubuntu) and trying to set up custom error messages using an .htaccess file that looks like this
[Code]...
When I save this to var/www/ it has no effect (tested on another server but using a shared hosting package it works fine).
Ubuntu :: Php - Mysql Error Messages Never Display / Show That?
Feb 9, 2011I have a LAMP installation for learning php and mysql. My online trainer pointed out that we always get a white screen when the php is wrong, when we should get error messages that say which line in the code is wrong etc.
I recently reinstalled mysql so it is the latest version from the repositories for Ubuntu 10.04.2 LTS.
Is there a way to make error messages show up?
Red Hat / Fedora :: Ldap Error Messages ?
Mar 29, 2010What do these error messages mean.
View 9 Replies View RelatedGeneral :: Linpus 2.6.32 / Error Messages Saying Something Such As Cannot Run Var?
Nov 5, 2010Just bought a brand new Acer Aspire 5745G, straight away I wanted to install Ubuntu 10.10, I stuck in the cd and rebooted the new laptop that currently only seemed to have Linpus Linux, I then got masses of error messages saying something such as cannot run var/ etc etc and then
:cannot touch 'var/lock/subsys/local': input/output error
and then...
EXT2-fs error (device sda1) : ext2_lookup: deleted inode referenced (lots of numbers here)
It does this for many, many lines then sites there for ages doing nothing and wont allow me to type any commands ( I dont know any command really apart from 'reboot') and then finally after 5 mins or so shows the command prompt [root@localhost /]# but I cant do anything from here.
I've done some searches and found this thread:
url
but startx and system-cofig-display dont work and just says bad commands.
Ive also tried changing the settings so it always reboots from dvd, same problem, made a USB ubuntu start up, forced booting from usb, same again.
Ubuntu One :: Website Error Messages When Adding Machine. No Icon Either?
Mar 15, 2010What happened to the cloud icon. Also using sys>prefs>ubuntuone takes me to the login page. It offers to add the machine but then this page pops up with these errors.
View 5 Replies View RelatedUbuntu :: Getting Error Messages Or A Password Querry Withouht Entry Box?
Oct 20, 2010I'm getting error messages or a password querry withouht entry box, if i want to apply admin changes on my system in gui tools
e.g.Software Center
Language Settings
free - gdm settins
users & groups
gksu and sudo are working with my user - it was the 1st user on the system, today i got the following message:
Quote:
org.freedesktop.PolicyKit.Error.NotAuthorized: ('system-bus-name', {'name': ':1.122'}): org.debian.apt.install-or-remove-packages
and sometimes the box apears multiple times and shakes like it does if entering a wrong password - and ends up with failed I'd be pleasant to get some help as it looks like most of the people in the german IRC don't know what to do as they thought like me these software parts would use gksu
Ubuntu Multimedia :: Brasero Stopped Launching - No Error Messages
Mar 25, 2011I've been burning a few linux ISOs lately to play around on a desktop I have (archlinux, Fedora, etc) and a few days ago Brasero stopped launching. I tried to uninstall/reinstall Brasero, but it still didn't work. There we no error messages, it would just try to start up, and quit.
I got frustrated and tried to run Brasero from the command line and got this:
Code:
user@computer:~$ brasero
Bus Error
user@computer:~$