I have a running PDC with Samba and LDAP. But when I want to join the Domain with an XP Pro Client I just get following error message.
"A Device connected to the System is not working".
I've been testing a PDC with samba and LDAP these days with the following unsolved issue. 1. I can add the client PC (Windows XP SP3) with the Domain Admin user (Manager) from the client PC, but when i try to add a user I get this message "The trust relationship between this workstation and primary domain failed", so as it can be added later I ignored this message and choose 'close' and reboot the PC. 2. Since the login screen is showed, the message 'Duplicate name exists on the network' appears. So I try to log on with a valid domain username and password after pressing ctrl+alt+del and get the error message: "System cannot log you on because domain rmprb is not available"
[Code]...
I installed CentOS 5.2 and then run yum update. I configured this server as LDAP/Samba primary domain controller. LDAP seems to be OK and for testing I am able to create users with:smbldap-tools useradd -am usernameI can ssh into the server as root and also as a Linux user which was locally created in the server. But ssh into the server as LDAP user fails (from a Fedora 11 machine) with "Permission denied, please try again", prompting again for password.Some data:
# rpm -qa | grep ldap
python-ldap-2.2.0-2.1
php-ldap-5.1.6-23.2.el5_3
[code]....
I'm setting up a PDC Samba server on centos5.4. All tasks are well done but on adding new machine in my domain I have a this error message: Error occurred when attempt to join your machine in domain "invalid user name".
samba.log
Code:
[2010/07/05 12:34:55, 2] smbd/sesssetup.c:setup_new_vc_session(1212)
setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2010/07/05 12:34:55, 2] smbd/sesssetup.c:setup_new_vc_session(1212)
setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2010/07/05 12:34:55, 2] auth/auth.c:check_ntlm_password(309)
check_ntlm_password: authentication for user [root] -> [root] -> [root] succeeded
[2010/07/05 12:34:55, 2] rpc_server/srv_samr_nt.c:_samr_lookup_domain(2919)
Returning domain sid for domain RAPHAELLO -> S-1-5-21-3852106609-489253481-401883016
smb.conf .....
I think that the machine account is missed or miss matched.
I have Linux installed on one machine with samba running and a second machine running XP. They are going through my router and I am using the same username/passwords for both machines and I have even gone to the point of allowing access to everyone for the share I created and the worgroup in samba is MSHOME just like my XP machine. When I view (or search) my workgroup computers my Linux machine shows up and so do the shares I created but when I try to open them I just get a message that permission is denied and I may not have permission to use this resource. I even tried setting access to the shared folder to 777 but still I can't open this share. Has anyone got any idea of why this is?
View 3 Replies View RelatedI am trying to set up samba in my CentOS virtual machine that is running on a Windows 7 host. I have found a tutorial in the How-Tos on this site but I'm not sure if they are exact and I'm paranoid about messing something up. The link to the tutorial is below. Is there anything that I should do different or anything that I should be aware of? Also, once this is set up, how do I transfer files between the two machines? Please note: I am very inexperienced in the IT field. [URL]...
View 2 Replies View RelatedI would like to setup LDAP (openldap) with Samba. I would like to know what should I setup first? Should I setup LDAP before Samba or Samba before LDAP?
View 1 Replies View RelatedI've tried to followed exactly the steps in:
[URL]
on how to setup Samba PDC w/ LDAP backend. I've reach far up to page two of the tutorial. However I'm stucked in the middle of the part of page two:
[URL]
in the part of the Start the LDAP Samba installation up and I should type the :
#useradd user1
#smbldap-useradd -a -G 'Domain Users' -m -s /bin/bash -d /home/user2 -F "" -P user1
I get this error:
Error looking for next uid in sambaDomainName=sambaDomain,dc=DOMAINNAME:No such object at /usr/lob/perl5/vendor_perl/5.8.8/smbldap_tools.pm line 1194.why does this appear, Is there any configurations missing?
I've setup my samba pdc with ldap, and I can see my shared files (public), which i think is an indication that my samba is working. But I can't seems to get my win2k8 machine to join my domain.
My domain admin is : root system admin: root password for both domain admin and system admin are the same The message that I get from Win2k8 when I try to join a domain is "The specified computer account could not be found. Contact an administrator to verify the account is in the domain. If the account has been deleted unjoin, reboot, and rejoin the domain"
[Code]...
I try to access my ubuntu machine via my Windows Machine (Samba Server on Ubuntu Machine). Anytime I try to access the machine it asks me for my password...I enter it but it says it is invalid....is there anyway to reset it? I have already tried to remove and purge everything Samba related and then tried reinstalling, but that still didn't do anything
View 2 Replies View RelatedI've installed CentOS 5.3 on a machine, and I need a Samba version 3.2 or higher. Since 3.4 is out, I thought I'd grab that. But, "yum list|grep samba" gives me only version 3.0.33. Is there a package of Samba I can grab that will upgrade the 3.0 installation so that I don't have two laying around? If not and I need to compile from source, do you have any suggestions for what arguments I should give configure? I'm not used to Linux coming from the BSD world
View 1 Replies View RelatedI have been able to accomplish my goal of creating an AD-like authentication using LDAP,SAMBA and LAM. From what I have seen you can have this type of setup but it doesn't allow the passing of group policies to the desktops of the users.
View 2 Replies View RelatedDoes winbindd must run on linux box client on network with samba ldap server configured as PDC.
View 5 Replies View RelatedI have the following version of centos,kerbose and samba (Samba version 3.0.33-3.29.el5_5.1, krb5-libs-1.6.1-36.el5_5.5 , krb5-workstation-1.6.1-36.el5_5.5 , centos-release-5-5.el5.centos) i have configured it and qhw i givit give me the following error Failed to set password for machine account NT_STATUS_ACCESS_DENIED) Failed to join domain: Access denied
[Code]...
I have a Fedora 11 PC, which I want to connect to the ldap server at my organisation. When my /etc/ldap.conf file is in place, the machine will not boot past "starting system messagebus" and just hangs there. I have to press the reset button, and boot it into single user mode, and remove /etc/ldap.conf, and only then will it boot. The ldap.conf file is fine, I think, because if you boot the machine up without ldap.conf, then log in.
I can put ldap.conf in place and immediately I can see all the user accounts etc. from the ldap server. If I then reboot, with ldap.conf in place, it hangs on boot again. I found a bug report for FC5 which stated this problem, but there was no solution. There was a workaround, making messagebus starting later in the boot process (move it from S22 to S27 in rc3/5.d), but that didn't help in my case.
My ldap.conf contains this (I've removed my actual ldap info):
host my.server.ip.addr
base dc=my,dc=dn
uri ldap://ldap.mydomain.com
ssl no
tls_cacertdir /etc/openldap/cacerts
pam_password md5
bind_policy soft
As I say, I think the ldap config is fine, because you can start it manually once the machine has booted up without an ldap.conf in place. I lifted it from a Centos client, which works fine and doesn't have the same problem with booting that Fedora does.
I'm having some trouble getting samba to work properly. I'm following this tutorial [URL] when I run
Code: sudo smbclient -L localhost I receive the following: Code: Enter root's password: Anonymous login successful Domain=[SAMBA] OS=[Unix] Server=[Samba 3.4.7]
tree connect failed: NT_STATUS_END_OF_FILE I'm lost!
Can anyone point me in the direction of setting up shares for windows machines on centos. I have found a few document but never managed to get it up and running correctly. I need to be able to get access to subfolder etc for different users. Is there any way of doing it with some sort of gui?
View 2 Replies View RelatedI have installed CentOS 5.5 along with the Samba package. I have it configured (i believe), but when I try to access a share, it is not accepting my UN/PW. I have copied the smb.conf file from a working computer over to this one, but it is still not accepting my login. Anyone know of any other files I should check?
I have moved a working smb.conf file to this new box, and both computers have the same UN/PW's
I am trying to set up samba in my CentOS virtual machine that is running on a Windows 7 host. I have found a tutorial in the How-Tos on this site but I'm not sure if they are exact and I'm paranoid about messing something up. The link to the tutorial is below. Is there anything that I should do different or anything that I should be aware of? Also, once this is set up, how do I transfer files between the two machines?
[URL]
I have two machines, one has XP service pack2, second one has CentOS 5.3 (Linux), they are connected through crossover cable. I have configured everything fine but don't know why till now can't ping!
A. Windows machine settings as follows:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gatway: 192.168.1.1
+ Firewall is turned OFF.
B. For Linux machine, I will list everything stored in network files, logged as [root@localhost ~]# :
1. /etc/sysconfig/network:
ifconfig eth0 192.168.1.4 netmask 255.255.255.0 up
route add -net 192.168.1.0 netmask 255.255.255.0 eth0
route add default gw 192.168.1.1 eth0
NETWORKING = yes
NETWORKING_IPV6=no
HOSTNAME=localhost.localdomain
2. /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
IPADDR="192.168.1.4"
NETMASK="255.255.255.0"
ONBOOT="yes"
BOOTPROTO="yes"
3. /etc/resolv.conf
nameserver 192.168.1.4
search locadomain
4. I restarted network service using this command:
/etc/init.d/network start
everything is fine. When checking using ifconfig command. I get the following:
eth0 Link encap: Ethernet HWaddr 00:08:0D:EE:19:66
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr:........
[code]....
I mean I assigned the IP: 192.168.1.4 to Linux machine (Eth0). I did everything above and can't ping till now, when pinging from windows or Linux I get a message "destination host unreachable" restarted Linux many times but same result. NETWORK CABLE is working fine I tested it.
How to install open ldap on CentOS 5
View 1 Replies View RelatedI'm setting up a LDAP server to centralize the admin of a bunch of Centos 5.2 servers. I've got the LDAP server set up. I've got my client machines reading their autofs mount tables from LDAP. Now, I'd like to get name resolution working via LDAP.
Here's what I have so far:
1) /etc/nsswitch.conf contains the line "hosts: files dns ldap"
2) /etc/openldap/ldap.conf has URI and NSS_BASE_HOSTS set up to indicate root of "hosts" subtree in LDAP database.
3) "hosts" node in database is an "orginizationalUnit" object.
4) Below "hosts" I have a number of "ipHost" nodes defined with "cn" set to host name and "ipHostNumber" set to host's IP address
This setup doesn't work. Attempting to ping a host by name locks up. If I take the "ldap" keyword off of the "hosts:" entry in the nsswitch.conf file, the ping then returns immediately with "unknown host".
I'm surprised that there isn't better information available online on how to do this. I've found bits and pieces, but nothing concise. how to get name resolution working through LDAP?
I have LDAP server but I'm not admin. When I type: ldapsearch -x -b "ou=2007,o=faculty" "cn=7username"
View 11 Replies View Relatedbut is there any thing i need to make sure on the domain controller for me to be able to join the domain with a linux machine alright?
View 2 Replies View Relatedusing the LDAP as storage of hostnames/IPs/MACs for the DHCP server on CentOS.Also once the IP is allocated via DHCP to the hosts,it would be useful to insert such host into the DNS. (BIND? dnsmasq?)I've found this link [URL] which deals with a patch for the ISC DHCP package, but I don't think this is actually up-to-date.
View 1 Replies View RelatedI am facing problem in adding new users in ldap server and client for a long time. I configure ldap server and client successfully and I can login the client machine by a user. User is created on server during configuring the server but after same time when I create a new user on server and create a home dir for the same user on client machine and assign 700 permission on home dir of same user and copy the /etc/skel/.* /home/user-dir and when run the command "#chown -R user:users /home/user" it shows invalid user error.
View 1 Replies View RelatedAt Design House I get LDAP installed and working with PHP5. Not used to rpm'ing - need to add LDAP to PHP5 hosted on SELinux on Network Solutions server and recompile. They installed an openldap but I'm not seeing PHP with it compiled.
'./configure' '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--cache-file=../config.cache' '--with-libdir=lib64' '--with-config-file-path=/etc' '--with-config-file-scan-dir=/etc/php.d' '--disable-debug' '--with-pic' '--disable-rpath' '--without-pear' '--with-bz2' '--with-curl' '--with-exec-dir=/usr/bin' '--with-freetype-dir=/usr' '--with-png-dir=/usr' '--enable-gd-native-ttf' '--without-gdbm' '--with-gettext' '--with-gmp' '--with-iconv' '--with-jpeg-dir=/usr' '--with-openssl' '--with-png' '--with-pspell' '--with-expat-dir=/usr' '--with-pcre-regex=/usr' '--with-zlib' '--with-layout=GNU' '--enable-exif' '--enable-ftp' '--enable-magic-quotes' '--enable-sockets' '--enable-sysvsem' '--enable-sysvshm' '--enable-sysvmsg' '--enable-track-vars' '--enable-trans-sid' '--enable-yp' '--enable-wddx' '--with-kerberos' '--enable-ucd-snmp-hack' '--with-unixODBC=shared,/usr' '--enable-memory-limit' '--enable-shmop' '--enable-calendar' '--enable-dbx' '--enable-dio' '--with-mime-magic=/etc/httpd/conf/magic' '--without-sqlite' '--with-libxml-dir=/usr' '--with-xml' '--with-apxs2=/usr/sbin/apxs' '--without-mysql' '--without-gd' '--without-odbc' '--disable-dom' '--disable-dba' '--without-unixODBC' '--disable-pdo' '--disable-xmlreader' '--disable-xmlwriter'
I'm trying to set up a fileserver on my 10.04 machine, and access the files from Windows 7 via wifi. I can see everything alright, but the transfer speed to Windows never gets higher than 70KBps. Both computers can access the web at 800+KBps. I've also checked with an OS X machine on the same network, which was also extremely slow, so I'm fairly sure that the problem is on the server's side.
View 2 Replies View RelatedI'd like to access a samba/SSH server which itself is connected to a VPN Server, therefore acting as a VPN Client. As soon as the VPN Connection is established, samba and ssh connections to this VPN Client get a timeout. But not all of them.
To get a better understanding I made an overview. The first one is a general network overview, without any VPN Connection, the second one with the VPN Connection established.
Network Overview without VPN
I can access the server in several ways:
*From the router via ssh (router runs ipcop with busybox)
*From the laptop via ssh (putty via Windows 7)
*From the laptop via samba
*From the internet via ssh (port forwarding to the ssh server)
Everything is working as it should.
Now the server that runs ssh and samba service connects to a VPN Server on the Internet, this is also working fine. Now it gets weird. The only samba/SSH connection that is still working is ssh directly from the router to the server. Everything else gets a timeout:
*From the laptop via ssh (putty via Windows 7)
*From the laptop via samba
*From the internet via ssh (port forwarding to the ssh server)
Network Overview with VPN active
Why is that? It seems from the little understanding I have of vpn and networking, that incoming packages (like samba request from the laptop) don't get send directly back over eth0 but over the vpn connection. This seems somewhat logic, BUT ssh from the router is still working. Why from the router and not from the laptop? I really can't get my head around it.
Configuration Overview
tldr; One Client acts as VPN Client and samba/SSH Server. As soon as the VPN Connection is established samba/SSH stop working, but only partially.
I am trying to see share files on my windows machine to my linux machine. I would like an answer to how to fix the problem. This is where i am at i am using my own network to learn who to use nmap properly. I ping my whole network with nmap -sS -O. Then i used nmblookup -a which gave me the infromation i needed. Then i run smbclient -L computername -I ip address -N
This will not show me the windows os this only show me my laptop. What can i change for this to show me the other computer on this network. The port i am wanting is open. I want to be able to mount the share files and move them to my computer i am going to use the commands put and get to move the files when i am able to get to the smb: >
[Code]...