Wireless issue with printer.Can't connect wirelsess to printer(Canon MP640).Running Ubuntu 10.4 in 64 bit mode.I am able to connect with my small home network and INTERNET is running OK.When I try to add a printer,I just do not know enough.Also,cannot find suitable driver.
View 3 RepliesI have a network printer which is on a windows domain/workgroup. Earlier I use to connect to the printer with URI socket://10.x.x.x:9100 and it worked fine. Then I after some time the going got tough and at the moment I am not able to print.
Initially I thought that I need to upgrade CUPS and even downloaded its latest version (did not installed it though).
My trouble shooting started with the ping then telnet followed it. Following is the output of telnet
Code:
****@linux-rafr:~> telnet 10.x.x.x 9100
Trying 10.x.x.x...
Connected to 10.x.x.x.
Escape character is '^]'.
Connection closed by foreign host.
****@linux-rafr:~>
I tried to telnet by turning off the firewall but no good. Hope someone has a solution to this issue.
BTW when test page print job is viewed in CUPS the following is the message.
Unable to write print data: Broken pipe
I'm having some problems with sharing my printer via SAMBA. Connected to my Ubuntu 9.10 Desktop is a HP office-jet D135 witch I shared via samba. I have no problems printing from my Ubuntu laptop. And in Vista I can see and access all the other shares, including the printer. But ones i try to access the printer I get a pop-up window telling me: "unable tot connect to printer error code 0x00000709 check if the name is correct or if the printer is connected to the network" ( but of course in Dutch). What is going wrong here?My /etc/samba/smb.conf
[Code]...
I have just got my network to work on Fedora, and now I have run into an new problem... I can't access any shared files or printers. The computer that has the printer and the files I want to access runs windows XP Home edition, and when I boot into XP on my machine, I can access the files and printer. Can this be fixed, or is Fedora incompatable with Windows XP in this case?
View 6 Replies View RelatedI am a new convert to Fedora with very little knowledge of Linux in general. I have managed to install Fedora 11 on my Advent 8315 laptop and I have wireless connection via my Belkin Wireless N modem router. I have always been able to setup Windows networking successfully but Fedora is much more complex, using terminology that I am not familiar with. What I need to do to achieve networking with my Windows computer? I especially want to network to my Canon printer which is connected to the Windows PC.
View 6 Replies View RelatedI would like to know if it is possible to configure my laptop so that it can print wirelessly on my MP800r canon printer, and if so then how to configure them to make this operation possible. I'm using Ubuntu.
View 1 Replies View RelatedMy wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies View RelatedI have a Canon PIXMA MG5250 stand alone wifi printer thats connected to all my windows computers and laptops. Now I want to install a computer with Ubuntu 10.10 and connect this printer also wireless by wifi.
View 9 Replies View RelatedI am unable to connect to my printer wirelessly. I get this: Idle - "Connecting to printer..." The computer never connects. I can print a configuration report and get the ip address. If I type that in a webrowser, I get an error: unable to connect. Even if I plug the printer into the computer by a usb, I am unable to access the printer's ip address in the webrowser. I'm not sure how to proceed on getting the printer working wirelessly. It is a hp 6940 I use the HP Deskjet 6940 Series hpijs, 3.10.2rc1.9 driver. I have only recently been having printer problems. The printer has been hooked up on the same network for years. It still prints via usb.
View 5 Replies View RelatedI've run into a slight problem. As you can tell, I cannot connect to my HP printer through bluetooth. I've followed the Ubuntu documentation: [URL]... but I get stuck at actually connecting to the device. Here's the terminal output:
robertneville777@robertneville777:~$ hcitool scan
Scanning ...
00:17:D5:06:3D:8CSAMSUNG SGH-T509
00:1A:0E:C3:F7:29Photosmart C5500 series
[Code]...
I give up.. after an hour trying to get my HP 7600 to network connect
My main box is usb connected to my HP Photosmart 7600 and works fine, my daughter has her winxp box connected to it over network as well. My wife's Ubuntu box (same OS and version as mine 9.10) CANNOT connect in any way, shape or form. I've tried every protocal, port, helper program (hp-setup, cups local webpage etc..) and nothing. I have the printer shared.
why connecting to a network printer in the same OS and version would take so much work?
Also we're all on the same network, & subnet with no filtering or firewalling in between the boxes.
*resolved* After trying everything else I restarted cups on the box the printer is attached and everything mysteriously works.
I have a canon printer which was working so far. After my latest upgrade its giving errors saying "Printer not connected -- Check your connection" Fortunately I had a backup of my root before the upgrade and one difference I see is that on the new system theres no /dev/usb/lp0 which there is on the old one. So how do I make it? Or should I use the /dev/lp0? Note they are different:
[Code].....
So (naturally) when I tried to make a softlink from /dev/usb/lp0 to /dev/lp0 it did not work.
Have split hard drive into Windows 7 OS & Ubuntu OS. The printer connected to Windows 7 with no problems but I am unable to load the printer in Ubuntu 11.04.
The printer is Lexmark Prevail Pro700 series.
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies View RelatedBeen using ubnutu gnome for a loooong time and my printer (Canon MX340) has been running just fine, configuration and usage.
I now switch to kde. configure my printer the same way i would under gnome and as soon as i send a job, it processes for about 3 seconds and just marks "stopped" under status. nothing goes through anymore!!
i've updated from 4.5 to 4.6 with backports and nothing is happening on there either.
im running maverick amd64 and using the i386 drivers (with dpkg -i --force-all) which are still recognized even under kde.
p.s.: the printer normally runs as wireless standalone (no samba/cups involvment whatsoever)
i am running T43 Thinkpad box with Ubuntu 11.04. we have a canon network printer model i-SENSYS MF4570dn printer, and i am trying to install the UFR II driver which i downloaded from canon website. the problem i am facing is that when i install the driver with gdebi i receive error message saying: Dependency is not satisfiable: gs-esp.i tried to install ge-eps but it is not part of the repository for 11.04
View 7 Replies View RelatedIs there a way to print from a Canon MX 330 All-in-One printer in Ubuntu 9.04? I'm trying to print through a Linksys WRT54G router. The printer is physically connected to a Desktop PC running Windows Vista (64-bit).I've tried installing the printer though CUPS to no avail. I tried the iP4600, iP3600 and iP2600 drivers and none of them have worked for me. I've even tried the Gutenprint PIXMA IP4600 drivers.
View 2 Replies View RelatedIs there a way to enable my Canon Printer/Scanner PIXMA MP 620B to work with Ubuntu?
View 2 Replies View RelatedI want to use my Canon Pixima MP600 Printer on Ubuntu, but don't know how. The Ubuntu Documents has support for the MP620. Canon USA doesn't offer drivers for Linux.
View 14 Replies View RelatedI'm a newcomer to Ubuntu. Have struggled with 9.04 and managed to get my Canon MP620 to work in that version. Now I have upgraded to 10.04 and have problems to get my printer to work again.
View 7 Replies View RelatedThere is not a driver for the Canon Pixma ip1800 Printer in Ubuntu. How do I go about getting this printer to work with Ubuntu 10.10.
View 9 Replies View Relatedafter looking around for hours, i finally gave up and decided to write this post. I need to know exactly what to do to get my canon mx860 printer connected to ubuntu wireless. ive tried nearly everything, but nothing really makes sense and it just doesn't work.
View 1 Replies View RelatedI want to get my Canon MP210 printer / scanner working under Fedora 8 Linux. When I plug the USB cable in, I get a little popup with a setup wizard, but my printer isn't even in that list. I've tried the system-config-printer wizard as well as going in through the control panels and trying everything reasonable.
View 5 Replies View RelatedI tried to install lbp 3108 printer driver for fedora 12. printer is not responding to print command what to do?
View 1 Replies View RelatedI just bought a Canon MF4370dn printer. It comes with Windows drivers on a cd. I was able to configure it for Windows 7 but not for Linux. Where can I get a Linux (Fedora 13) driver?
View 3 Replies View RelatedI have done a fresh install of Ubuntu 8.04 on my partners desktop PC and am attempting to get her printer working, so far no luck. Ubuntu does not list a specific driver for this printer in 8.04 Printer is a Canon laserjet model L1112E according to the label on the printer itself but the printed instruction leaflet calls it a LBP 3000.Canon website offers a linux driver for lbp3000.
View 9 Replies View RelatedI'm using Ubuntu 9.10 64-bit on an Intel i7. I just bought a Canon color ImageClass MF8050cn laser printer and connected it to the network. I let the software pick a driver, but when I print my document goes into a black hole never to be found again. I also have a Mac and a Vista machine which can both connect just fine and print in color. So it's not the printer.
Has anyone successfully made this work? If so, what driver are you using, where do I get it if it's not in Synaptic, and what settings do I use? I checked on the Canon site, but they only support Windows and Mac. Before anyone goes there, I would like to use a non-generic driver for this if possible. I'm at work right now and the printer is at home, so I can't get specifics at the moment.
I am running Lucid 64bit on my laptop and been trying to install a canon printer driver LBP3200 on it. There are some comprehensive tutorials that I have been following and they worked on my desktop. However the last thing I have to do is
Code:
sudo update-rc.d ccpd defaults 50
which gives me the error
Code:
update-rc.d: warning: /etc/init.d/ccpd missing LSB information
update-rc.d: see [URL]
System start/stop links for /etc/init.d/ccpd already exist.
I checked in /etc and I do not have the rc.d dir! I have rc0.d through to rc6.d and rcS.d dir, but no rc.d one. Is this normal? and if so how can I get the correct file to start/stop the ccpd daemon for the printer? At the moment the print command brings up the printer icon for about ten seconds and then it disappears and nothing happens.
I am looking for a good new ALL IN ONE printer that will be compatible with Ubuntu right out of the box (scanner and everything).
I am also looking for a portable bluetooth printer that will be compatible. I currently have a Canon pixma ip90v bluetooth printer but I cant get it to print AT ALL and Ive tryed everything.
I am currently running 3 computers with Ubuntu 10.10 and one with 11.04 Alpha 3.
I have a Canon PIXMA iP1200 and Ubuntu does not recognise it. Need a driver for this printer?
View 6 Replies View Related