Hardware :: Canon Lbp3108 Printer Not Responding?
Feb 9, 2010I tried to install lbp 3108 printer driver for fedora 12. printer is not responding to print command what to do?
View 1 Replies
ADVERTISEMENT
Debian :: Canon Printer - Lp0 - "Printer Not Connected -- Check Your Connection"
Jul 31, 2011I have a canon printer which was working so far. After my latest upgrade its giving errors saying "Printer not connected -- Check your connection" Fortunately I had a backup of my root before the upgrade and one difference I see is that on the new system theres no /dev/usb/lp0 which there is on the old one. So how do I make it? Or should I use the /dev/lp0? Note they are different:
[Code].....
So (naturally) when I tried to make a softlink from /dev/usb/lp0 to /dev/lp0 it did not work.
General :: Dell A940 Printer Not Responding?
Jul 6, 2011The computer is communicating with the printer, but the printer isn't printing. What can I do?
View 1 Replies View RelatedFedora :: Networking F11 With Windows XP (Canon Printer)
Aug 25, 2009I am a new convert to Fedora with very little knowledge of Linux in general. I have managed to install Fedora 11 on my Advent 8315 laptop and I have wireless connection via my Belkin Wireless N modem router. I have always been able to setup Windows networking successfully but Fedora is much more complex, using terminology that I am not familiar with. What I need to do to achieve networking with my Windows computer? I especially want to network to my Canon printer which is connected to the Windows PC.
View 6 Replies View RelatedFedora :: Get A Canon MP210 Printer/scanner To Run?
Sep 21, 2009I want to get my Canon MP210 printer / scanner working under Fedora 8 Linux. When I plug the USB cable in, I get a little popup with a setup wizard, but my printer isn't even in that list. I've tried the system-config-printer wizard as well as going in through the control panels and trying everything reasonable.
View 5 Replies View RelatedUbuntu :: Canon MX340 Printer Not Printing?
Feb 4, 2011Been using ubnutu gnome for a loooong time and my printer (Canon MX340) has been running just fine, configuration and usage.
I now switch to kde. configure my printer the same way i would under gnome and as soon as i send a job, it processes for about 3 seconds and just marks "stopped" under status. nothing goes through anymore!!
i've updated from 4.5 to 4.6 with backports and nothing is happening on there either.
im running maverick amd64 and using the i386 drivers (with dpkg -i --force-all) which are still recognized even under kde.
p.s.: the printer normally runs as wireless standalone (no samba/cups involvment whatsoever)
Ubuntu :: Installing The Canon Printer Driver?
Jun 21, 2011i am running T43 Thinkpad box with Ubuntu 11.04. we have a canon network printer model i-SENSYS MF4570dn printer, and i am trying to install the UFR II driver which i downloaded from canon website. the problem i am facing is that when i install the driver with gdebi i receive error message saying: Dependency is not satisfiable: gs-esp.i tried to install ge-eps but it is not part of the repository for 11.04
View 7 Replies View RelatedUbuntu :: Printing With Canon MX330 Printer?
Jan 15, 2010Is there a way to print from a Canon MX 330 All-in-One printer in Ubuntu 9.04? I'm trying to print through a Linksys WRT54G router. The printer is physically connected to a Desktop PC running Windows Vista (64-bit).I've tried installing the printer though CUPS to no avail. I tried the iP4600, iP3600 and iP2600 drivers and none of them have worked for me. I've even tried the Gutenprint PIXMA IP4600 drivers.
View 2 Replies View RelatedUbuntu :: Enable Canon Printer/Scanner?
Aug 6, 2010Is there a way to enable my Canon Printer/Scanner PIXMA MP 620B to work with Ubuntu?
View 2 Replies View RelatedHardware :: How To Set Canon MP600 Printer For Ubuntu
Feb 28, 2011I want to use my Canon Pixima MP600 Printer on Ubuntu, but don't know how. The Ubuntu Documents has support for the MP620. Canon USA doesn't offer drivers for Linux.
View 14 Replies View RelatedHardware :: Driver For Canon MF4370 Printer ?
Jan 16, 2011I just bought a Canon MF4370dn printer. It comes with Windows drivers on a cd. I was able to configure it for Windows 7 but not for Linux. Where can I get a Linux (Fedora 13) driver?
View 3 Replies View RelatedGeneral :: Getting Canon Printer Driver Installation?
Sep 11, 2010I have done a fresh install of Ubuntu 8.04 on my partners desktop PC and am attempting to get her printer working, so far no luck. Ubuntu does not list a specific driver for this printer in 8.04 Printer is a Canon laserjet model L1112E according to the label on the printer itself but the printed instruction leaflet calls it a LBP 3000.Canon website offers a linux driver for lbp3000.
View 9 Replies View RelatedDebian Configuration :: Can't Print From A CANON LBP6020 Printer
Aug 4, 2015I have the printer Canon i-SENSYS LBP6020. I followed the instructions from the site URL....There are no errors, but when I try to print, nothing comes out of the printer.My system is: Debian GNU/Linux 8 (jessie)Here is some debugging information:
Error log while printing from a CANON LBP6020: URL....
Troubleshooting information while printing from CANON LBP6020: URL....
Fedora Hardware :: Canon IP1700 Printer Not Talking
Sep 22, 2010I am one of the many people who are having many problems getting the Canon ip1700 pixma printer to work with Linux. I think that it can be done. I've followed every step that I could on this page: [URL] Everything goes fine until I enter the username and password on CUPS, using my "root" and my root password. I get this annoying google chrome thing, "aw, snap, this page can't load..." I really need to use my printer.
View 9 Replies View RelatedOpenSUSE Hardware :: Does This MP620 Canon Printer Work?
Jun 11, 2010I am interested in acquiring a Canon MP620 printer scanner. I am looking at the printer list from linux.com, and I don't see it there. Wondering if it works really good with Opensuse.
View 5 Replies View RelatedOpenSUSE Hardware :: Can't Find Canon MP280 Printer
Nov 27, 2010I just downloaded and installed openSUSE 11.2. It looks good. Very fast and extremely stable.
My problem is that I use a 'Canon MP280' Printer / Scanner / Copier.
It seems that my printer and openSUSE are not compatible.
OpenSUSE can't find Canon MP280.
OpenSUSE Hardware :: Printer (Canon MX700) Configuration On 11.4
Sep 6, 2011I have just installed OpenSuse 11.4 on my old desktop Compaq Presario, I coming from an amount of experience with Linux, anyway, for the moment I have a problem with my printer connected on a domestic network, this printer have an assigned address as the same as for my desktop and all other devices of this network, but I'm not able to connect with it, if I try to connect the printer by USB I haven't no problem, more strange is because of the printer have got a scanner and I was able to connect it via network, the same problem I had with Ubuntu.
View 9 Replies View RelatedUbuntu :: Printer Canon MP620 Not Working With Lucid
May 2, 2010I'm a newcomer to Ubuntu. Have struggled with 9.04 and managed to get my Canon MP620 to work in that version. Now I have upgraded to 10.04 and have problems to get my printer to work again.
View 7 Replies View RelatedUbuntu :: Can't Install Canon Pixma Ip1800 Printer On 10.10
Oct 15, 2010There is not a driver for the Canon Pixma ip1800 Printer in Ubuntu. How do I go about getting this printer to work with Ubuntu 10.10.
View 9 Replies View RelatedUbuntu Installation :: Get Canon Printer Working Wirelessly?
Apr 13, 2011after looking around for hours, i finally gave up and decided to write this post. I need to know exactly what to do to get my canon mx860 printer connected to ubuntu wireless. ive tried nearly everything, but nothing really makes sense and it just doesn't work.
View 1 Replies View RelatedRed Hat / Fedora :: Canon 3108b Laser Printer Driver ?
Jan 8, 2010I am having a Canon 3108B printer But no driver/rpms for my fedora 9. I can going to install fedora 12. Can i download driver for this printer also? if so from Where?
View 1 Replies View RelatedNetworking :: Print Wirelessly On MP800r Canon Printer?
Dec 2, 2010I would like to know if it is possible to configure my laptop so that it can print wirelessly on my MP800r canon printer, and if so then how to configure them to make this operation possible. I'm using Ubuntu.
View 1 Replies View RelatedGeneral :: Canon IP1600 Printer-system Not Modified?
Oct 19, 2010I recently bought a used Canon IP1600 Inkjet Printer. It did not come with the cd-rom to install and set up this printer. I downloaded the driver. And i recieved a message saying my system is not modified.
View 1 Replies View RelatedGeneral :: Installing Canon MX-860 Wireless Printer In Xubuntu?
Sep 16, 2010I've been running Xubuntu 9.04 for the past couple of months but have difficulty installing my Canon MX-860 wireless printer. Everything else works perfectly and connects wirelessly to internet. Since I run a couple of other Win based computers, printing from the Toshiba 1100 laptop hasn't been a problem. It would be an advantage. I tried to install the latest Xubuntu distro on the Toshiba and it installed but could not connect to the wireless Atheros card. Where should I start? get Distro 10.04 working first or try and install the printer with the existing distro?
View 7 Replies View RelatedDebian Hardware :: Installing Canon Printer Drivers To Jessie
Aug 4, 2015My purpose is to be able to use Canon printers with my debian jessie system (installed via netinst iso).
I have read this wiki page but unfortunately it is a little old. I still have followed/adapted the instructions there but it fails on my system on step 6. I will explain below.
Latest Canon drivers in the official website is v3.10. US version of it can be obtained from here.
When I try to install .deb package in the driver file archive I get following output:
Code: Select allsudo dpkg -i cndrvcups-ufr2-us_3.00-1_amd64.deb
[sudo] password for ert:
Selecting previously unselected package cndrvcups-ufr2-us.
(Reading database ... 155527 files and directories currently installed.)
Preparing to unpack cndrvcups-ufr2-us_3.00-1_amd64.deb ...
Unpacking cndrvcups-ufr2-us (3.00-1) ...
[Code] ....
And the next thing I tried:
Code: Select allsudo apt-get install cndrvcups-common
[sudo] password for ert:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package cndrvcups-common is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source. However the following packages replace it:
cndrvcups-ufr2-uk cndrvcups-ufr2-us
E: Package 'cndrvcups-common' has no installation candidate
I cannot solve this package error.
Fedora Hardware :: Canon S100 Printer Doesn't Print
Sep 6, 2010F13 showing that Canon s100 printer is founded, installed drivers and everything seems to be OK. But when i try to print text, testpage of what ever, nothing happened. Installed system-config-printer 1.2.4-1.f13, same udev and libs. Cups 1:1.4.4.5.f13, libraries, php modules Here is the Error msg:
[code]...
Fedora :: Canon Lbp3000 Laser Printer - Make It Work Under F14 And F15?
Jun 17, 2011Has anyone installed successfully a Canon LBP3000 laser printer?I would like to make it work under F14 and F15.
View 5 Replies View RelatedOpenSUSE Hardware :: Canon I860 Printer Drivers Not Included In 11.2
Feb 23, 2010I recently installed openSUSE 11.2 on a computer with a Canon i860 printer attached to it. Previously this computer had Ubuntu 9.10 installed on it. When Ubuntu was installed on it, the computer found and printed on the Canon i860 printer just fine. When I installed openSUSE, the list of Canon drivers did *not* include the Canon i860. Just for giggles I selected Canon BJC 4000.
It prints, but it "misbehaves" - For example, if I want to print a document that says only "Hello world", it will print it, but it prints it about 20 times on one sheet. I figure this insanity is caused by the improper driver I selected. I'm not expert enough to know how to get this printer working. And - why would it work okay in Ubuntu 9.10, but not openSUSE 11.2? Did I do something wrong while installing openSUSE?
OpenSUSE Hardware :: Canon MF4150 Printer Does Not Print Anything After One Printing?
Oct 23, 2010I have Canon MF4150 printer. I have downloaded Linux Printer Driver (UFR II) Ver.2.10E from canon asia site. Adding the printer and printing work fine, except that after one printing, the printer stops working. There is no error message./var/log/cups/access_log shows
Code:
localhost - - [23/Oct/2010:19:53:55 -0500] "POST /printers/Canon-MF4100-Series HTTP/1.1" 200 45240 Print-Job successful-ok
[code]...
OpenSUSE Hardware :: Canon MF4350d - Data Error On Printer
Mar 27, 2011Have updated my system to 11.4 (Fresh install) and installed the driver from canon, and when you print the test page, it prints fine. But it now when I want to print a pdf or web page where it will say printer data error on the printer. Another thing is that it seems to print fine when the document is plain text like if I print a document from libre, it will print or when i send a print test page. Also when the document does not go through, the cnpkmoduleufr2 sits in memory and then chows 50% of cpu. In 11.3 worked beautifully so am thinking that this is a software issue.
View 8 Replies View Related