Is there a way to print from a Canon MX 330 All-in-One printer in Ubuntu 9.04? I'm trying to print through a Linksys WRT54G router. The printer is physically connected to a Desktop PC running Windows Vista (64-bit).I've tried installing the printer though CUPS to no avail. I tried the iP4600, iP3600 and iP2600 drivers and none of them have worked for me. I've even tried the Gutenprint PIXMA IP4600 drivers.
View 2 RepliesI have downloaded successfully the drivers for the printer component of the MX330. The scanner drivers are downloaded,but I am unable to locate the working part of the .sh file so that I can open it. I have the .sh file in text, but do not know how to utilize it
View 1 Replies View RelatedBeen using ubnutu gnome for a loooong time and my printer (Canon MX340) has been running just fine, configuration and usage.
I now switch to kde. configure my printer the same way i would under gnome and as soon as i send a job, it processes for about 3 seconds and just marks "stopped" under status. nothing goes through anymore!!
i've updated from 4.5 to 4.6 with backports and nothing is happening on there either.
im running maverick amd64 and using the i386 drivers (with dpkg -i --force-all) which are still recognized even under kde.
p.s.: the printer normally runs as wireless standalone (no samba/cups involvment whatsoever)
I have Canon MF4150 printer. I have downloaded Linux Printer Driver (UFR II) Ver.2.10E from canon asia site. Adding the printer and printing work fine, except that after one printing, the printer stops working. There is no error message./var/log/cups/access_log shows
Code:
localhost - - [23/Oct/2010:19:53:55 -0500] "POST /printers/Canon-MF4100-Series HTTP/1.1" 200 45240 Print-Job successful-ok
[code]...
Does anyone have an idea of where i can find a driver for this printer? The system does not have one and if I try a driver for say the PIXMA MP220 which is CUPS + Gutenprint v5.2.4 [en] (actually, all the PIXMA drivers are that one) and I print the printer seems like it receives some command but nothing else happens. The printer says 'Printing from PC' and then goes back to the main screen.
View 5 Replies View RelatedIm attempting to install a Canon MX330 as my default printer. I have made reference to several posts that deal with Canon printers and have followed them without success.
I first searched [URL] for the appropriate drivers and came up with -cnijfilter-common-3.10-1.i386.rpm and cnijfilter-mx330series-3.10-1.i386.rpm.I then issued rpm -ivh for both, but got the error message libpopt.so.0 is needed by cnijfilter.I then issued ls -l /usr/lib/libpng* and saw that libpng.so.3 wasn't found. I next issued zypper in libpng3 and then -- ln -l usr/lib64/cups /usr/lib/cups and ln -l usr/lib/cups/filter/pstocanoni /usr/lib64/cups/filter Then I issued /etc/init.d/cups restart. Finally, I entered ln -s /usr/lib/cups/filter/pstocanonij /usr/lib64/cups/filter. ls -l /usr/lib/libpng* shows ---
and smoltGui shows that the driver for the printer is still unknown.If I try to use Cups to install the printer, I can't get past the screen that asks for the driver, since my driver is not listed and I don't know how to enter both drivers as new PDDs.
I have recently purchased a canon pixma mx330 all in one printer. I tried using yast on 64 bit opensuse 11.1, kernel version 2.6.27.7-9 to locate the necessary driver to no avail. Is this a futile attempt or is there a driver that yast can't find.
View 1 Replies View RelatedI have recently lost the use of my schools printers (schools out of session), and found myself in need of printing a document. I have a Canon Pixima ip1700, but I can only find software for a wide variety of Windows OS and a Mac. Unfortunately for this situation, I'm using Ubuntu 10.04. I've searched through the Software Center, and found an assortment of printer related software, but I don't know how to use any of it to allow my computer to print this single, lonely page.nDoes anyone have any advice as to how to connect a computer to a printer? Beyond putting the long cord into the USB thingy, that is, and preferably without using TurboPrint, or any other software that leaves a banner?
View 1 Replies View RelatedI found instructions on how to install the drivers for my Canon MP560 to get the printer working when connected with the USB cord. But I still can't seem to use the scanner or print wirelessly to the printer.Not really sure where to start.
View 9 Replies View RelatedI am brand new to Ubuntu (1 day). I can find my way round most things but I can't print to my Canon Pixma. I have tried to download Australian drivers from a 2007 thread but when I try to download I get the error message "wrong architecture i386". My computer uses an AMD Athlon IIx3 processor. When I say can't print, the file goes into a print queue but the printer does not respond at all. I can see the printer when I go into system, admin, printing.
View 14 Replies View RelatedMy first day as Ubuntu 9.10 user. Downloaded drivers from Canon Europe and installed .deb package using G and all seemed ok but no actual printing occurs. System says all installed ok and indicates printing occurring but no physical printing happens. Checked printer on another PC and all ok.
View 1 Replies View RelatedI use an Intel P8700, 2 core 64 bit m/c.I have tried downloading the Canon binary files, but these fail after starting when the software detects a 64 bit mc.Now trying with the Canon source files.extracted the print filter loaded the "autogen.sh" which ran and invited me to type "make". Yes! I thought!I have been trying to print for about 5 months now, and am getting weary!George "autogen.sh"ran ./configure, apparently successfully, invited me to type "make" which I did. This failed!I have a copy of the interaction but cannot see any way to add it to this post.
View 6 Replies View RelatedHow do I want to print with the Canon iP1800 for printing equipment is not in my list of printers. Now I use Ubuntu 9.04.
View 3 Replies View RelatedI have a canon printer which was working so far. After my latest upgrade its giving errors saying "Printer not connected -- Check your connection" Fortunately I had a backup of my root before the upgrade and one difference I see is that on the new system theres no /dev/usb/lp0 which there is on the old one. So how do I make it? Or should I use the /dev/lp0? Note they are different:
[Code].....
So (naturally) when I tried to make a softlink from /dev/usb/lp0 to /dev/lp0 it did not work.
How to printing with double-sided print
In case of usling each driver...
I want to select 3 option double-sided,layout 2up,color(grayscale)
Configuring at cups web page [url]
"Inkjet Print Filter Ver.2.70" and "3.0" is as same as "Ver 2.60" In case of using each canon drivers,can't select color option window. And there is no color option on cups page,and system-config-printer. I thought any canon official driver may be no able to apply double-sided option.
i am running T43 Thinkpad box with Ubuntu 11.04. we have a canon network printer model i-SENSYS MF4570dn printer, and i am trying to install the UFR II driver which i downloaded from canon website. the problem i am facing is that when i install the driver with gdebi i receive error message saying: Dependency is not satisfiable: gs-esp.i tried to install ge-eps but it is not part of the repository for 11.04
View 7 Replies View RelatedIs there a way to enable my Canon Printer/Scanner PIXMA MP 620B to work with Ubuntu?
View 2 Replies View RelatedI want to use my Canon Pixima MP600 Printer on Ubuntu, but don't know how. The Ubuntu Documents has support for the MP620. Canon USA doesn't offer drivers for Linux.
View 14 Replies View RelatedI'm a newcomer to Ubuntu. Have struggled with 9.04 and managed to get my Canon MP620 to work in that version. Now I have upgraded to 10.04 and have problems to get my printer to work again.
View 7 Replies View RelatedThere is not a driver for the Canon Pixma ip1800 Printer in Ubuntu. How do I go about getting this printer to work with Ubuntu 10.10.
View 9 Replies View Relatedafter looking around for hours, i finally gave up and decided to write this post. I need to know exactly what to do to get my canon mx860 printer connected to ubuntu wireless. ive tried nearly everything, but nothing really makes sense and it just doesn't work.
View 1 Replies View RelatedI am a new convert to Fedora with very little knowledge of Linux in general. I have managed to install Fedora 11 on my Advent 8315 laptop and I have wireless connection via my Belkin Wireless N modem router. I have always been able to setup Windows networking successfully but Fedora is much more complex, using terminology that I am not familiar with. What I need to do to achieve networking with my Windows computer? I especially want to network to my Canon printer which is connected to the Windows PC.
View 6 Replies View RelatedI want to get my Canon MP210 printer / scanner working under Fedora 8 Linux. When I plug the USB cable in, I get a little popup with a setup wizard, but my printer isn't even in that list. I've tried the system-config-printer wizard as well as going in through the control panels and trying everything reasonable.
View 5 Replies View RelatedI tried to install lbp 3108 printer driver for fedora 12. printer is not responding to print command what to do?
View 1 Replies View RelatedI just bought a Canon MF4370dn printer. It comes with Windows drivers on a cd. I was able to configure it for Windows 7 but not for Linux. Where can I get a Linux (Fedora 13) driver?
View 3 Replies View RelatedI have done a fresh install of Ubuntu 8.04 on my partners desktop PC and am attempting to get her printer working, so far no luck. Ubuntu does not list a specific driver for this printer in 8.04 Printer is a Canon laserjet model L1112E according to the label on the printer itself but the printed instruction leaflet calls it a LBP 3000.Canon website offers a linux driver for lbp3000.
View 9 Replies View RelatedI'm using Ubuntu 9.10 64-bit on an Intel i7. I just bought a Canon color ImageClass MF8050cn laser printer and connected it to the network. I let the software pick a driver, but when I print my document goes into a black hole never to be found again. I also have a Mac and a Vista machine which can both connect just fine and print in color. So it's not the printer.
Has anyone successfully made this work? If so, what driver are you using, where do I get it if it's not in Synaptic, and what settings do I use? I checked on the Canon site, but they only support Windows and Mac. Before anyone goes there, I would like to use a non-generic driver for this if possible. I'm at work right now and the printer is at home, so I can't get specifics at the moment.
I am running Lucid 64bit on my laptop and been trying to install a canon printer driver LBP3200 on it. There are some comprehensive tutorials that I have been following and they worked on my desktop. However the last thing I have to do is
Code:
sudo update-rc.d ccpd defaults 50
which gives me the error
Code:
update-rc.d: warning: /etc/init.d/ccpd missing LSB information
update-rc.d: see [URL]
System start/stop links for /etc/init.d/ccpd already exist.
I checked in /etc and I do not have the rc.d dir! I have rc0.d through to rc6.d and rcS.d dir, but no rc.d one. Is this normal? and if so how can I get the correct file to start/stop the ccpd daemon for the printer? At the moment the print command brings up the printer icon for about ten seconds and then it disappears and nothing happens.
I am looking for a good new ALL IN ONE printer that will be compatible with Ubuntu right out of the box (scanner and everything).
I am also looking for a portable bluetooth printer that will be compatible. I currently have a Canon pixma ip90v bluetooth printer but I cant get it to print AT ALL and Ive tryed everything.
I am currently running 3 computers with Ubuntu 10.10 and one with 11.04 Alpha 3.
I have a Canon PIXMA iP1200 and Ubuntu does not recognise it. Need a driver for this printer?
View 6 Replies View Related