Fedora :: Networking F11 With Windows XP (Canon Printer)

Aug 25, 2009

I am a new convert to Fedora with very little knowledge of Linux in general. I have managed to install Fedora 11 on my Advent 8315 laptop and I have wireless connection via my Belkin Wireless N modem router. I have always been able to setup Windows networking successfully but Fedora is much more complex, using terminology that I am not familiar with. What I need to do to achieve networking with my Windows computer? I especially want to network to my Canon printer which is connected to the Windows PC.

View 6 Replies


ADVERTISEMENT

Networking :: Print Wirelessly On MP800r Canon Printer?

Dec 2, 2010

I would like to know if it is possible to configure my laptop so that it can print wirelessly on my MP800r canon printer, and if so then how to configure them to make this operation possible. I'm using Ubuntu.

View 1 Replies View Related

Fedora :: Get A Canon MP210 Printer/scanner To Run?

Sep 21, 2009

I want to get my Canon MP210 printer / scanner working under Fedora 8 Linux. When I plug the USB cable in, I get a little popup with a setup wizard, but my printer isn't even in that list. I've tried the system-config-printer wizard as well as going in through the control panels and trying everything reasonable.

View 5 Replies View Related

Ubuntu Networking :: Unable To Connect Wirelsess To Printer(Canon MP640)?

Jul 2, 2010

Wireless issue with printer.Can't connect wirelsess to printer(Canon MP640).Running Ubuntu 10.4 in 64 bit mode.I am able to connect with my small home network and INTERNET is running OK.When I try to add a printer,I just do not know enough.Also,cannot find suitable driver.

View 3 Replies View Related

Fedora Hardware :: Canon IP1700 Printer Not Talking

Sep 22, 2010

I am one of the many people who are having many problems getting the Canon ip1700 pixma printer to work with Linux. I think that it can be done. I've followed every step that I could on this page: [URL] Everything goes fine until I enter the username and password on CUPS, using my "root" and my root password. I get this annoying google chrome thing, "aw, snap, this page can't load..." I really need to use my printer.

View 9 Replies View Related

Red Hat / Fedora :: Canon 3108b Laser Printer Driver ?

Jan 8, 2010

I am having a Canon 3108B printer But no driver/rpms for my fedora 9. I can going to install fedora 12. Can i download driver for this printer also? if so from Where?

View 1 Replies View Related

Ubuntu Networking :: Install A Canon PIXMA MG5250 Wireless Wifi Printer?

Dec 30, 2010

I have a Canon PIXMA MG5250 stand alone wifi printer thats connected to all my windows computers and laptops. Now I want to install a computer with Ubuntu 10.10 and connect this printer also wireless by wifi.

View 9 Replies View Related

Fedora Hardware :: Canon S100 Printer Doesn't Print

Sep 6, 2010

F13 showing that Canon s100 printer is founded, installed drivers and everything seems to be OK. But when i try to print text, testpage of what ever, nothing happened. Installed system-config-printer 1.2.4-1.f13, same udev and libs. Cups 1:1.4.4.5.f13, libraries, php modules Here is the Error msg:

[code]...

View 14 Replies View Related

Fedora :: Canon Lbp3000 Laser Printer - Make It Work Under F14 And F15?

Jun 17, 2011

Has anyone installed successfully a Canon LBP3000 laser printer?I would like to make it work under F14 and F15.

View 5 Replies View Related

Fedora Hardware :: Canon MX860 Multifunction Wireless Printer Not Detected

Jun 2, 2010

I have Canon MX860 Multifunction USB/Wireless printer that I am trying to add in Fedora 13. Looking under Desktop > Computer via USB connection, the printer is detected as some hardware device I can mount and unmount. However, when I am trying to add this printer via System > Administration > Printing, the printer is not detected at all nor can I add. FYI, this printer works fine in Ubuntu 10.04 LTS. How I can make this printer working in Fedora 13?

View 5 Replies View Related

Fedora Hardware :: Can't Install My Multifunction Printer CANON I-SENSYS MF4690PL

Jun 21, 2010

I installed Fedora 13 and can't install my multifunction printer CANON i-SENSYS MF4690PL.The scanner works fine (very odd) only printer not working.Is there a specific driver for this printer and if so, how to install this driver on Fedora 13? The MF4690PL and GNU/Linux I get this in terminal:

Code:
[root@Philip philip]# system-config-printer libnotify-Message: Unable to get session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.How do I now if the kernel has support for my printer ?

[Code]...

View 5 Replies View Related

Fedora Networking :: Printing From A Windows Printer?

Oct 15, 2009

I have a windows machine on my lan with a printer attached. I have samba running on my F11 laptop and I can use it to access shared files on the windows machine. But how can I use the printer from fedora? When I go to Administor>Printers then I just get an empty list, even after pressing 'rescan'. Do I have to change some firewall/samba configuration? If not then where else would I see the printer?

View 2 Replies View Related

Fedora Networking :: How To Share Printer To Windows

Jun 28, 2010

I am trying to share my printer with a windows xp machine.Samber server and configuration tool is installed. Still I have no clue how to get this to work. The printer is setup and working on my Fedora desktop.as anyone done this before and can give a step by step description on how to setup a Linux printer on a network (home-network) with windows.I already searched for it but non of the tutorial were clear enough or missing something.

View 12 Replies View Related

Fedora Networking :: Share A Printer To Windows Machines?

Feb 9, 2009

I have a machine running fedora 10 that has a printer in cups that i want to share to the windows machines on the network.I cant find any mention of shareing printers in the cups interface

View 1 Replies View Related

Fedora Networking :: Can't Print To Shared Windows Printer From Fedora

Feb 20, 2011

I am trying to set up printing on my Fedora 14 laptop, on my home network.

Details:

- Home network, single subnet, the desktops are connected to the switch portion of my Linksys via Ethernet and all have static addresses. Name resolution between them is via hosts file entries. The router is running wireless (WPA2/AES/DHCP) to accommodate my laptop which is dual boot XP Pro and Linux Fedora 14.

- The printer is an HP Deskjet F4180 printer. It is attached via USB to a Windows XP Pro box and shared. The XP box is wired and static ip.

- I am able to see all the shares and print to the shared printer from any of the Windows boxes, wired and wireless, including my laptop when I run Windows on it.

- My Fedora 14 is working fine on wireless, using Network Manager and KDE desktop. I am able to access all the Windows shares on both of my wired desktops. One desktop is XP Pro, the other is Windows 7.

This is what happens when I try to set up printing on Fedora:

- I go to Administration / Printing and click to Add a Printer.
- I am prompted for the root password twice, which I put in.
- I select Network Printer / Windows printer via samba and click on Browse...
- It finds my WORKGROOUP and machine name mig29 and prompts for user ID and password which I type in.

[code]....

the user ID and logon on Fedora is different from the one on Windows. During setup I am prompted for credentials. It seems to me that somewhere down the line Fedora supplies not the credentials I supply but my local user ID and password and it obviously fails.

View 8 Replies View Related

Debian :: Canon Printer - Lp0 - "Printer Not Connected -- Check Your Connection"

Jul 31, 2011

I have a canon printer which was working so far. After my latest upgrade its giving errors saying "Printer not connected -- Check your connection" Fortunately I had a backup of my root before the upgrade and one difference I see is that on the new system theres no /dev/usb/lp0 which there is on the old one. So how do I make it? Or should I use the /dev/lp0? Note they are different:

[Code].....

So (naturally) when I tried to make a softlink from /dev/usb/lp0 to /dev/lp0 it did not work.

View 10 Replies View Related

Fedora :: Add The Canon Pixmar MG5150 Printer To 13 Setup - Error "pstocanonij Failed"

Jul 26, 2011

I have been trying to add the Canon Pixmar MG5150 printer to my Fedora 13 setup. I downloaded the drivers and installed them but I keep getting an error saying the pstocanonij failed.

View 5 Replies View Related

Ubuntu :: Canon MX340 Printer Not Printing?

Feb 4, 2011

Been using ubnutu gnome for a loooong time and my printer (Canon MX340) has been running just fine, configuration and usage.

I now switch to kde. configure my printer the same way i would under gnome and as soon as i send a job, it processes for about 3 seconds and just marks "stopped" under status. nothing goes through anymore!!

i've updated from 4.5 to 4.6 with backports and nothing is happening on there either.

im running maverick amd64 and using the i386 drivers (with dpkg -i --force-all) which are still recognized even under kde.

p.s.: the printer normally runs as wireless standalone (no samba/cups involvment whatsoever)

View 9 Replies View Related

Ubuntu :: Installing The Canon Printer Driver?

Jun 21, 2011

i am running T43 Thinkpad box with Ubuntu 11.04. we have a canon network printer model i-SENSYS MF4570dn printer, and i am trying to install the UFR II driver which i downloaded from canon website. the problem i am facing is that when i install the driver with gdebi i receive error message saying: Dependency is not satisfiable: gs-esp.i tried to install ge-eps but it is not part of the repository for 11.04

View 7 Replies View Related

Ubuntu :: Printing With Canon MX330 Printer?

Jan 15, 2010

Is there a way to print from a Canon MX 330 All-in-One printer in Ubuntu 9.04? I'm trying to print through a Linksys WRT54G router. The printer is physically connected to a Desktop PC running Windows Vista (64-bit).I've tried installing the printer though CUPS to no avail. I tried the iP4600, iP3600 and iP2600 drivers and none of them have worked for me. I've even tried the Gutenprint PIXMA IP4600 drivers.

View 2 Replies View Related

Ubuntu :: Enable Canon Printer/Scanner?

Aug 6, 2010

Is there a way to enable my Canon Printer/Scanner PIXMA MP 620B to work with Ubuntu?

View 2 Replies View Related

Hardware :: Canon Lbp3108 Printer Not Responding?

Feb 9, 2010

I tried to install lbp 3108 printer driver for fedora 12. printer is not responding to print command what to do?

View 1 Replies View Related

Hardware :: How To Set Canon MP600 Printer For Ubuntu

Feb 28, 2011

I want to use my Canon Pixima MP600 Printer on Ubuntu, but don't know how. The Ubuntu Documents has support for the MP620. Canon USA doesn't offer drivers for Linux.

View 14 Replies View Related

Hardware :: Driver For Canon MF4370 Printer ?

Jan 16, 2011

I just bought a Canon MF4370dn printer. It comes with Windows drivers on a cd. I was able to configure it for Windows 7 but not for Linux. Where can I get a Linux (Fedora 13) driver?

View 3 Replies View Related

General :: Getting Canon Printer Driver Installation?

Sep 11, 2010

I have done a fresh install of Ubuntu 8.04 on my partners desktop PC and am attempting to get her printer working, so far no luck. Ubuntu does not list a specific driver for this printer in 8.04 Printer is a Canon laserjet model L1112E according to the label on the printer itself but the printed instruction leaflet calls it a LBP 3000.Canon website offers a linux driver for lbp3000.

View 9 Replies View Related

General :: Installing Printer - Add Printer In Local Network Or Windows Printer Via Samba

Nov 23, 2009

I just upgrade to Fedora 11.

I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.

The summary is as follow:

I have download a printer driver and had installed but got error when I tried to printer a test page.

View 6 Replies View Related

Debian Configuration :: Can't Print From A CANON LBP6020 Printer

Aug 4, 2015

I have the printer Canon i-SENSYS LBP6020. I followed the instructions from the site URL....There are no errors, but when I try to print, nothing comes out of the printer.My system is: Debian GNU/Linux 8 (jessie)Here is some debugging information:

Error log while printing from a CANON LBP6020: URL....
Troubleshooting information while printing from CANON LBP6020: URL....

View 3 Replies View Related

OpenSUSE Hardware :: Does This MP620 Canon Printer Work?

Jun 11, 2010

I am interested in acquiring a Canon MP620 printer scanner. I am looking at the printer list from linux.com, and I don't see it there. Wondering if it works really good with Opensuse.

View 5 Replies View Related

OpenSUSE Hardware :: Can't Find Canon MP280 Printer

Nov 27, 2010

I just downloaded and installed openSUSE 11.2. It looks good. Very fast and extremely stable.

My problem is that I use a 'Canon MP280' Printer / Scanner / Copier.

It seems that my printer and openSUSE are not compatible.

OpenSUSE can't find Canon MP280.

View 6 Replies View Related

OpenSUSE Hardware :: Printer (Canon MX700) Configuration On 11.4

Sep 6, 2011

I have just installed OpenSuse 11.4 on my old desktop Compaq Presario, I coming from an amount of experience with Linux, anyway, for the moment I have a problem with my printer connected on a domestic network, this printer have an assigned address as the same as for my desktop and all other devices of this network, but I'm not able to connect with it, if I try to connect the printer by USB I haven't no problem, more strange is because of the printer have got a scanner and I was able to connect it via network, the same problem I had with Ubuntu.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved