Ubuntu :: Canon Printer PIXMA IP1200 Driver Required

Apr 1, 2011

I have a Canon PIXMA iP1200 and Ubuntu does not recognise it. Need a driver for this printer?

View 6 Replies


ADVERTISEMENT

Ubuntu :: Can't Install Canon Pixma Ip1800 Printer On 10.10

Oct 15, 2010

There is not a driver for the Canon Pixma ip1800 Printer in Ubuntu. How do I go about getting this printer to work with Ubuntu 10.10.

View 9 Replies View Related

Ubuntu :: Canon Pixma Ip90v Bluetooth Printer Cant Print?

Mar 10, 2011

I am looking for a good new ALL IN ONE printer that will be compatible with Ubuntu right out of the box (scanner and everything).

I am also looking for a portable bluetooth printer that will be compatible. I currently have a Canon pixma ip90v bluetooth printer but I cant get it to print AT ALL and Ive tryed everything.

I am currently running 3 computers with Ubuntu 10.10 and one with 11.04 Alpha 3.

View 4 Replies View Related

OpenSUSE Hardware :: Setup Printer A Canon Pixma MP530?

May 8, 2011

When I try to set up my printer a Canon Pixma MP530, there is no driver! Only the Generic ones and they don't work. On Ubuntu using the Pixma MP500 driver works just fine, but there is no option for that on suse. Only for HP and Generic. The only solution I have found was turbo print, and that costs $30. I am hoping to find a solution, I really like SUSE, but I may have to go back to Ubuntu.

View 9 Replies View Related

General :: Need System Scanner For Canon PIXMA MP460 Printer

Apr 7, 2011

Are there any (easy to install) (X)SANE backends for Canon PIXMA MP460?

View 1 Replies View Related

Ubuntu :: Driver For Canon Pixma MX330?

Jan 26, 2010

Does anyone have an idea of where i can find a driver for this printer? The system does not have one and if I try a driver for say the PIXMA MP220 which is CUPS + Gutenprint v5.2.4 [en] (actually, all the PIXMA drivers are that one) and I print the printer seems like it receives some command but nothing else happens. The printer says 'Printing from PC' and then goes back to the main screen.

View 5 Replies View Related

Ubuntu Networking :: Install A Canon PIXMA MG5250 Wireless Wifi Printer?

Dec 30, 2010

I have a Canon PIXMA MG5250 stand alone wifi printer thats connected to all my windows computers and laptops. Now I want to install a computer with Ubuntu 10.10 and connect this printer also wireless by wifi.

View 9 Replies View Related

OpenSUSE Hardware :: Canon Pixma Printer Not Working Anymore After Installing 11.3?

Aug 4, 2010

I have a canon pixma mp640. Under opensuse 11.2 64 bit the printer worked (printing and scanning via wifi). I recently reinstalled my system with 11.3 64 bit, and after installing the canon rpms and creating the printer I get the following error in /var/log/cups/error_log:

Code:

Backend returned status 1 (failed)
printer-state-message="Illegal backend: Success"

In opensuse 11.2 I needed to create some links:

Code:

cd /usr/lib64/cups/filter
ln -s ../../../lib/cups/filter/pstocanonij
cd /usr/lib64/cups/backend

[code]....

View 6 Replies View Related

Ubuntu Networking :: Driver For Canon Pixma Mg6120?

Feb 5, 2011

I am new to Linux and to make matters worse, am trying to install a new printer but cannot find the drivers for it. it is a cannon pixma mg 6120.

View 1 Replies View Related

Debian :: Using Squeeze And A Canon Pixma IP4600 Printer - Printers Color Isn't True

Oct 29, 2010

Using Squeeze and a Canon Pixma IP4600 Printer. The color on the printed pages used to be true and now it isn't, it still print is color just not the correct colors.I am color deficient or color challenged (what used to be called color blind) which dosen't mean I can't tell the difference between what is on the screen and what is printed It's not the printer as I have tested it with other Linux and a windows system and it's good.

View 2 Replies View Related

General :: Where To Find Driver To Canon Pixma IP2600 To Work In Ubuntu?

Jan 30, 2011

I have downloaded all drivers from canon website for linux or Ubuntu . My computer find this printer which suppose to be the right one but nothing happen ? usb://Canon/iP2600%20series. do I need more drivers or files to work in Ubuntu ?

View 1 Replies View Related

Ubuntu :: Installing The Canon Printer Driver?

Jun 21, 2011

i am running T43 Thinkpad box with Ubuntu 11.04. we have a canon network printer model i-SENSYS MF4570dn printer, and i am trying to install the UFR II driver which i downloaded from canon website. the problem i am facing is that when i install the driver with gdebi i receive error message saying: Dependency is not satisfiable: gs-esp.i tried to install ge-eps but it is not part of the repository for 11.04

View 7 Replies View Related

Hardware :: Driver For Canon MF4370 Printer ?

Jan 16, 2011

I just bought a Canon MF4370dn printer. It comes with Windows drivers on a cd. I was able to configure it for Windows 7 but not for Linux. Where can I get a Linux (Fedora 13) driver?

View 3 Replies View Related

General :: Getting Canon Printer Driver Installation?

Sep 11, 2010

I have done a fresh install of Ubuntu 8.04 on my partners desktop PC and am attempting to get her printer working, so far no luck. Ubuntu does not list a specific driver for this printer in 8.04 Printer is a Canon laserjet model L1112E according to the label on the printer itself but the printed instruction leaflet calls it a LBP 3000.Canon website offers a linux driver for lbp3000.

View 9 Replies View Related

Ubuntu :: Installing Canon Printer Driver - Missing LSB Information

Jun 8, 2010

I am running Lucid 64bit on my laptop and been trying to install a canon printer driver LBP3200 on it. There are some comprehensive tutorials that I have been following and they worked on my desktop. However the last thing I have to do is

Code:
sudo update-rc.d ccpd defaults 50
which gives me the error

Code:
update-rc.d: warning: /etc/init.d/ccpd missing LSB information
update-rc.d: see [URL]
System start/stop links for /etc/init.d/ccpd already exist.

I checked in /etc and I do not have the rc.d dir! I have rc0.d through to rc6.d and rcS.d dir, but no rc.d one. Is this normal? and if so how can I get the correct file to start/stop the ccpd daemon for the printer? At the moment the print command brings up the printer icon for about ten seconds and then it disappears and nothing happens.

View 2 Replies View Related

Red Hat / Fedora :: Canon 3108b Laser Printer Driver ?

Jan 8, 2010

I am having a Canon 3108B printer But no driver/rpms for my fedora 9. I can going to install fedora 12. Can i download driver for this printer also? if so from Where?

View 1 Replies View Related

OpenSUSE Install :: Canon ImageCLASS MF4150 Printer Driver

Jan 23, 2010

I need to install the driver and I downloaded the Canon install package. The instructions read:

# rpm -ivh [file name of common module for CUPS drivers]

This rpm package construct was used in the Fedora distro.

Does it also work in openSUSE?

The only other construct given was for a deb package.

I looked in YasT for the driver but it was not there.

View 9 Replies View Related

OpenSUSE Hardware :: Driver For Epson Printer USB DX6050 Required?

Nov 14, 2010

I tried to configure this printer and clicked on "add printer" but the drop down menu did not contain my printer. Does this mean that the printer driver does not exist?

When I tried to print out a test Open Office document it came up with "printer error" However Open Suse did recognise my printer as a DX6000.

[URL]

View 1 Replies View Related

Ubuntu :: Installing Canon Pixma MP140 In 11.04?

Aug 4, 2011

I was using 10.04 until a few days ago, and with 10.04 my printer worked fine, I used the default drivers for MP150 and that worked fine. But now I'm using 11.04 and I'm trying to instal the printer with the default drivers for MP150 but it's not working. When Ubuntu tries to find the driver is not giving me any result for MP140, so I'm selecting the option "CANON PIXMA MP150 - CUPS+Gutenprint v5.2.6 Simplified [en] (Recomended)" and allows me to click next and to give a name to the printer and to hit next, but then the windows closes and that's it then I go to System > Admin > Printer and I double click the printer I just created and I click Print Test Page and then it gives me "Printer Status: Processing - Printing Page 1.8%" and after 4minutes or so gives me "Installation or actualization of package "python-xmpp 0.4.1-cvx20080505.2" failed" and that's it Is there a way to fix this? I have no idea why this is not working since it worked fine in 10.04, and I really need to use the printer and the scanner as soon as possible

View 3 Replies View Related

Ubuntu :: Canon Pixma IP2600 Ready For Use But No Print Out

Feb 12, 2010

I just bought a new printer yesterday. It is a Canon Pixma iP2600 series. I connected everything properly and my computer found the drivers and told me the printer was ready for use. However, when I tried to print out a test page the computer said it was printing, the printer was flashing as it should, but nothing was printing out. Is there some switch I need to turn on or off? Is there something that I need to type in or delete somewhere? The old printer was a HP deskjet and it did work even if it was a little slow being that it is over 8 years old.

View 6 Replies View Related

Ubuntu :: Get The Canon Pixma MP495 Working In 10.10 (Maverick)?

Oct 21, 2010

I have finaly gotten the Canon Pixma MP495 working under Ubuntu 10.10, with full resolution capabilities of the printer.This printer is only advirtised as having a max resolution of 4800x1200 DPI. However, I called Canon to get the full range of print resolutions and was informed that this printer is capable of 9600x2400 DPI.I haven't tested this below Ubuntu 10.04 but it should work fine.

For setting your MP495 printer up on your network without the use of a Windows or Mac machine (Fresh out of the box with Ubuntu) you will need to match your Routers SSID to the printers default SSID, and remove any security you have enabled. This will allow the printer to connect to your network.

Printer Defaults:

SSID: BJNPSETUP
IP ADDRESS: Automatic

Once you have done that you will need to activate the wireless lan on the printer.Press the Maintenance button on the printer 13 times until you see what looks like a capital G without the middle line. Then press the color start button. (refer to page 10 of your Network Setup Troubleshooting manual for an actual picture of the symbol) You should see the wifi light on the front of the printer turn on and be solid not be blinking. (If it is blinking check your routers SSID settings and match the Default SSID of the printer as listed above.

Now download angryipscanner AngryIPScanner and install it by double clicking it. It should open in the Software center or with the Gdebi installer. (this may take a few minutes to install.)Once you have installed AngryIPScanner, run it and change the ip range to include from 1 - 254 in the last octet. Then click start. When it finishes look for an active connection with a Hostname like A001BF000000.local. Yours may be different but should be very simular.

The IP address given for that hostname is the IP address of your printer. Open Firefox and type that address in the address bar and press enter. From there you can configure you printer for the SSID, and encryption that you had on your router before the change, and set a static IP for the printer so you can manage it easily.After you change the SSID and encryption on the printer you will have to go back to your router and change the SSID and encryption back to what it was before so your printer can connect again.Now your network should be back the way it was and your printer should be connected Now that you have successfully connected the printer to your wireless network continue with the rest of the installation. Download the drivers for the MP495 . You will be downloading cnijfilter-mp495series-3.40-1-deb.tar.gz.

Extract cnijfilter-mp495series-3.40-1-deb.tar.gz to your Home directory.Change the permissions of the install.sh file to run and an executable by Right licking on install.sh and then left clicking Properties. Click on the Permissions tab and put a check mark in the Allow Executing file as program box. Then open a terminal and type: [CODE]sudo ./install.sh[CODE] Follow the prompts and if you are using the printer over the network select network when prompted. I you are using it via USB choose USB. Don't forget to scroll down to complete setting up your printer to use full resolution and set up the scanner.If the first method didnt work try this.Open a terminal and enter

Code:

cd /home/*/cnijfilter-mp495series-3.40-1-deb/packages. (Enter your username where the astride is.)
Quote:
For 64 bit systems you need to replace cnijfilter-common_3.40-1_i386.deb, and cnijfilter-mp495series_3.40-1_i386.deb with cnijfilter-common_3.40-1_amd64.deb, and cnijfilter-mp495series_3.40-1_amd64.deb. For the printer setup. For the scanner replace scangearmp-

[code].....

View 9 Replies View Related

Ubuntu :: Using Canon Pixma MG5220 - How To Print To It From My Computer

Apr 7, 2011

I recently purchased the canon pixma mg5220 and am currently figuring out how to print to it from my computer.

First of all, I dont know how to connect to it (its a wireless printer btw and is currently connected to my wireless router). I went to the "add new printer" part of the printer utility and selected "Find Network Printer." I dont know what to type in for "host" however. Right now i have a temporary fix of sharing the printer on my laptop (which runs windows) and printing through that.

Second of all, drivers. I found http://ubuntuforums.org/showthread.php?t=1588333 and downloaded the drivers (to my downloads folder) from the link provided, but I can't figure out how to install it. The post says to run the install.sh but it seems to be just a text file, and when i right click it, "properties" is not an option, so i cant mark it as executable. How would can i run this file to install the drivers?

View 1 Replies View Related

General :: Install Canon Pixma Ip1300 On Ubuntu?

May 29, 2010

I have a Canon Pixma Ip1300 color printer but I don't know how to install it on ubuntu 10.

View 3 Replies View Related

General :: Can't Get Ubuntu 11.04 To Print On Canon Pixma Ip2772?

May 27, 2011

I can't get my ubuntu 11.04 to print on canon pixma ip2772, it says that I got canon ip2700 series installed, and show that I am printing a test page, but nothing happens on the printer.

View 4 Replies View Related

Ubuntu :: Printing & Scanning With Canon Pixma MP560

Aug 31, 2010

I use an Intel P8700, 2 core 64 bit m/c.I have tried downloading the Canon binary files, but these fail after starting when the software detects a 64 bit mc.Now trying with the Canon source files.extracted the print filter loaded the "autogen.sh" which ran and invited me to type "make". Yes! I thought!I have been trying to print for about 5 months now, and am getting weary!George "autogen.sh"ran ./configure, apparently successfully, invited me to type "make" which I did. This failed!I have a copy of the interaction but cannot see any way to add it to this post.

View 6 Replies View Related

OpenSUSE Hardware :: Installing Canon Pixma Ip3000 On 11.2?

Mar 19, 2010

I have just installed SUSE 11.2, but although my ip3000 shows in the hardware, I cannot get a correct print out on A4 paper and I am informed that no driver is available. There must be a work-around for this?

View 6 Replies View Related

OpenSUSE Hardware :: Canon Pixma IP1880 - No Color

Oct 15, 2010

It's weird because it did not even print different shades of gray (for the colors), as though I set it to print to black-and-white, when clearly I did not.

View 3 Replies View Related

OpenSUSE Hardware :: Configuring Canon PIXMA MP510 Under 11.3

Jan 14, 2011

I'm trying to get my Canon Pixma MP510 scanner to work under openSUSE 11.3. Canon Linux Support doesn't seem to have anything for 11.3, but sane claims to provide basic functionality. The printer is working fine, but I don't manage to configure the scanner.

I tried to configure via YaST, but the following happens: The scanner is found, but (correctly) labbelled as "not configured". Clicking "Edit", the PIXMA MP510 is listed and a driver suggested: "Canon PIXMA MP510: (Package sane-backends) Driver pixma should provide basic functionality (USB-ID 0x04a9:0x1717)" If I select this option an click on "Next", the window crashes and I get the following error in the KDialog window, but I have no clue what it means: "YaST got signal 11 at YCP file Wizard.ycp:849 /sbin/yast2: line 399: 5663 Segmentation fault $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS"

Is this a YaST problem? Or driver related? I thought about configuring the scanner without YaST, but don't know how to do it. I tried to google a HowTo, but couldn't find anything useful.

The command "sane-find-scanner" successfully detects the scanner, "found USB scanner (vendor=0x04a9 [Canon], product=0x1717 [MP510]) at libusb:001:004", but the command "scanimage -L" yields "No scanners were identified."

how to make YaST configure my scanner? Or how to configure it without YaST?

View 9 Replies View Related

Hardware :: Canon Pixma Mx330 Opensuse 11.1 Compatibility?

Jan 29, 2010

I have recently purchased a canon pixma mx330 all in one printer. I tried using yast on 64 bit opensuse 11.1, kernel version 2.6.27.7-9 to locate the necessary driver to no avail. Is this a futile attempt or is there a driver that yast can't find.

View 1 Replies View Related

General :: Unable To Print To Canon Pixma 1800

Apr 22, 2011

Running Ubuntu 10.10, when trying to print to canon 1800 print file is created, spooled to printer but does not print. Job appears in print Q and ends as finished job, next job number increases correctly. Printer light flashes to indicate data in,, but nothing out on paper !! (printer works fine on "the Other" OS!

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved