I give up.. after an hour trying to get my HP 7600 to network connect
My main box is usb connected to my HP Photosmart 7600 and works fine, my daughter has her winxp box connected to it over network as well. My wife's Ubuntu box (same OS and version as mine 9.10) CANNOT connect in any way, shape or form. I've tried every protocal, port, helper program (hp-setup, cups local webpage etc..) and nothing. I have the printer shared.
why connecting to a network printer in the same OS and version would take so much work?
Also we're all on the same network, & subnet with no filtering or firewalling in between the boxes.
*resolved* After trying everything else I restarted cups on the box the printer is attached and everything mysteriously works.
I am unable to connect to my printer wirelessly. I get this: Idle - "Connecting to printer..." The computer never connects. I can print a configuration report and get the ip address. If I type that in a webrowser, I get an error: unable to connect. Even if I plug the printer into the computer by a usb, I am unable to access the printer's ip address in the webrowser. I'm not sure how to proceed on getting the printer working wirelessly. It is a hp 6940 I use the HP Deskjet 6940 Series hpijs, 3.10.2rc1.9 driver. I have only recently been having printer problems. The printer has been hooked up on the same network for years. It still prints via usb.
I've run into a slight problem. As you can tell, I cannot connect to my HP printer through bluetooth. I've followed the Ubuntu documentation: [URL]... but I get stuck at actually connecting to the device. Here's the terminal output:
robertneville777@robertneville777:~$ hcitool scan Scanning ... 00:17:D5:06:3D:8CSAMSUNG SGH-T509 00:1A:0E:C3:F7:29Photosmart C5500 series
I have a network printer which is on a windows domain/workgroup. Earlier I use to connect to the printer with URI socket://10.x.x.x:9100 and it worked fine. Then I after some time the going got tough and at the moment I am not able to print.
Initially I thought that I need to upgrade CUPS and even downloaded its latest version (did not installed it though).
My trouble shooting started with the ping then telnet followed it. Following is the output of telnet
Code: ****@linux-rafr:~> telnet 10.x.x.x 9100 Trying 10.x.x.x... Connected to 10.x.x.x. Escape character is '^]'. Connection closed by foreign host. ****@linux-rafr:~>
I tried to telnet by turning off the firewall but no good. Hope someone has a solution to this issue.
BTW when test page print job is viewed in CUPS the following is the message.
Have split hard drive into Windows 7 OS & Ubuntu OS. The printer connected to Windows 7 with no problems but I am unable to load the printer in Ubuntu 11.04.
I'm having some problems with sharing my printer via SAMBA. Connected to my Ubuntu 9.10 Desktop is a HP office-jet D135 witch I shared via samba. I have no problems printing from my Ubuntu laptop. And in Vista I can see and access all the other shares, including the printer. But ones i try to access the printer I get a pop-up window telling me: "unable tot connect to printer error code 0x00000709 check if the name is correct or if the printer is connected to the network" ( but of course in Dutch). What is going wrong here?My /etc/samba/smb.conf
I am attempting to connect a CentOS VMWare VM to a networked Brother HL5170DN printer. The printer is located at 192.168.0.101. It is available and I can connect to it with various Ubuntu and Windoze VMs.
I have searched for instructions on how to do this and it SEEMS rather simple. However, it does not work. Here is what I have done:
System; Administration; Printing to launch the printer configuration wizard supply root password New Printer Provide printer name, description etc. Select Connection - LPD/LPR Host or Printer Hostname - 192.168.0.101 supply a printer name again select Brother HL5170DN BR-Scripts3 from the footmatic database complete creating the printer
The printer appears as a local printer, however, I cannot print a test page. Nothing happens when I click the button to print a test page. I can ping the printer by IP address. So I deleted the printer and tried again.
At the screen which asks for Hostname and Printername I entered the printer's IP address in Hostname as I had done before. I then clicked the Probe button. At this point Printer configuration freezes and I have to do a force quit.
I just tried the same thing on a physical CentOS 5.6 box - just in case the problem was a VMWare thing. Same symptoms. Probe freezes the Printer configuration program. I then recalled that the printer uses port 9100. I opened 9100 on the firewall (I think) but no improvement. I temporarily disabled the firewall and went throug the proces. I now have the printer defined at "socket://192.168.0.101:9100" and recognized as "Brother HL-5170DN BR-Script3"
I still cannot print a test page. I tried to print from gedit and it shows the printer with 1 job in the queue. The gedit print bumped that to 2 jobs in the "printing" state. Looks like I am communicating with the printer. Just not printing.
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
Wireless issue with printer.Can't connect wirelsess to printer(Canon MP640).Running Ubuntu 10.4 in 64 bit mode.I am able to connect with my small home network and INTERNET is running OK.When I try to add a printer,I just do not know enough.Also,cannot find suitable driver.
I have just got my network to work on Fedora, and now I have run into an new problem... I can't access any shared files or printers. The computer that has the printer and the files I want to access runs windows XP Home edition, and when I boot into XP on my machine, I can access the files and printer. Can this be fixed, or is Fedora incompatable with Windows XP in this case?
My USB printer is connected to an OpenSUSE 11.2 desktop on a home network. I shared the printer with samba and can print from a Windows XP notebook connected to the network, but whenever I try to connect a Windows 7 machine, I always get the message that Windows cannot connect to the printer.
I recently installed 10.04 and unable to print to local or network printer?
When I go to System Admin/Printing to add my printers, screen says I am not connected to localhost and I am unable to use Add printer. When I used version 9.10, I added a network + a local printer by this method but I'm not sure what I have done wrong this time around.
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
I'm trying to install Brother DL-5250DN laser network printer. I have read the manual at [URL] and also I have searched the forum but I didn't find a solution yet. The problem is that I don't know what is the printer type that I have to select. None of the description really match for this printer. It is a printer which is directly connected to the network and *not* to a Linux or Windows machine. The only type that matches is AppSocket/HP JetDirect. I tried to cinfigure it with CUPS but it doesn't work. After I type the password nothing happens.
I'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
I am using OpenSuse 11.3 and Network Manager is giving me a headache by not connecting to WEP based wi-fi network.It works in a wi-fi at my office while at my home, it shows / detects the network but keeps asking me over and over.
I've got my other networking problem (mostly) solved, but now I'm having other issues.I was previously able to access the shared folders on a Windows machine on the network essentially by default. Now whenever I try to navigate to the shared folders graphically (either through Places->Network->Windows Network->(workgroup name here), or through a custom shortcut on the deskop), I get a message: "Failed to retrieve share list from server". I have no idea what I might have done config-wise (or install-program-wise) to screw it over, but something's definitely not working...it's been like this for a good many weeks, and I've just dealt with it, seeing as how I don't normally use that shared folder much anyway.
What's really ticking me off now, though, is that long before this started happening, I had set up a printer share with the same computer (using the graphical tool that comes with Ubuntu), and that worked excellently to start out. Recently, however, when I tried to print from the same printer (after the "Failed to retrieve share list" message started showing up), it would sit there and show "Pending"; it wouldn't print at all. Then I tried deleting the existing entry and creating a new one, figuring a new, fresh configuration would be created. However, when I tried to add a printer via the graphical tool (same as I had done before), it's telling me that "No printer was fount at [that] address".
I'm unable to connect to a particular home wireless network under Fedora 9, although I can connect to it using WinXP on the same machine. My Fedora installation is able to connect to my college's unsecured wireless network, so it's not a driver issue I think.It seems to be an authorisation issue, as I'll describe below, but there's one other thing that's bothering me. The SSID for the network I have problems with is for some reason not listed in Network Manager's drop-down list, nor is it in the output of iwlist wlan0 scan. But I'm pretty sure it's not a "hidden" network - I don't know exactly how those work, but I helped the owner of the wifi network in setting it up, and don't remember doing anything that would make it hidden. As far as I can remember, Windows found the network automatically without having to be told the SSID. What's the best way to confirm whether it's a hidden network or not?
Anyway, I try to connect by selecting connect to other wireless network in Network Manager, and entering the SSID. As far as I can tell from the error messages below, the machine does contact the network and attempt to connect, but I'm not authorising myself properly. That may be a completely wrong diagnosis, but hopefully someone can see from the below info whether it's correct or not.I'm not sure which option to use for "Wireless Security": at the time we set up the network, it gave us a Hex WEP key of 26 characters, which is 104 bits. But none of the options in Network Manager's list match that. Here are the options it has, and the error message I get with each one:None - if I select this, it fails to connect, with no error message. WEP 128-bit passphrase - if I select this and attempt to use my 26-character WEP key, it brings up a new dialog, saying "Passwords or encryption keys are required to access the wireless network [SSID]." It has a drop-down box labelled "Wireless Security", but this time the only option is "None", and the connect button is disabled, I can only click cancel. WEP 40/128-bit hex - as above. WEP 40/128-bit ASCII - The connect button is disabled when I try to use the WEP key, as the string is too long. Despite the fact that it says 40/128-bit, it actually accepts 5 and 13-character strings (40 or 104-bit). Since I've got a 104-bit hex key, I tried converting it to ASCII, but it consists of mostly unprintable characters, so I'm not sure there's any way to actually enter it into the textfield. I might have done something wrong here, so I've put my code below to see if anyone can point out a mistake. LEAP - requires a username, not applicable here I think. Windows doesn't need one, and we don't have one from when we set the network up.Dynamic WEP (802.1x) - requires username, private key and various other things, all N/A WPA & WPA2 Personal - Brings up a dialog with the same text as for "128-bit passphrase", but this time "WPA & WPA2 Personal" is the only option in the drop-down list, instead of "None". It asks for a password, so I just enter the hex key again - now it asks for the password for the Gnome Default Keyring, which I don't think I've ever set up. Don't know if I can go any further with that, but my understanding is that since we were given a WEP key when we set up the network, WPA will be N/A.WPA & WPA2 Enterprise - as Dynamic WEP. N/A.Hopefully that's enough info that someone can help diagnose the problem. Some of the behaviour of Network Manager described above doesn't make sense to me, and I'm wondering if it's buggy.
I have a Windows print server (Win XP SP2) and a 1 opensuse client. I have setup cups as per the following document:
Printer Sharing: Windows Print Server for Suse/openSUSE Linux Clients [Samba and LPD]
I am not using Samba. The setup went fine, but I am not able to print to it. There are other clients (all Windows) that are printing fine to this print server. The following is what I see in the /var/log/cups/error_log:
[Job 3] recoverable: Unable to connect to printer; will retry in 30 seconds...
I am using DHCP in this LAN. Ping is working fine (client's hosts file updated with the print server's ip address.). This looks like a networking issue.
the remote printer appears in cups but if I try to do a test page i get a page not found error. it even says ready under yast printers.it is set up on a remote desktop using cups
Having made the transition from a certain widely used operating system to linux, suse 11.2, x64, successfully and pleasantly we are still left with a few problems.One of these is a few applications i have to use which run only in that old OS. ?To that end I have installed VirtualBox and got them to run with one glitch. I cannot print from VBox to my HP LaserJet 4000, lpt1 printer, which works fine in suse. Searching and posting on the Vbox forums turned up that lpt1 is not supported in the current vbox and that I need to set up a virtual network, set up the printer as a network printer and set it up as an lpd/lpr printer in Vbox WinXP. Have tried many different ways to do this without success, I think the problem is I do not know how to set up a network printer in Linux.
The virtual network is vboxnet0, which does show up in ifconfig, along with my eth0 net, and I can ping the windows guest, gateway and the host from either side host:suse/guest:winXP) respectively. Have tried numerous ways of setting up printer in YaST which works in suse but still does not work from WinXP guest. Have read the suse manual and several sources and searched forums with no results.Finally I am thinking I just don't know how to set up a network printer in linux. Using cups, kde, suse 11.2, don't know what else to tell. Samba is installed, although I am not using it to the best of my knowledge.
I see the network applet in the panel which shows that I am connected but I cannot access the net. I found out that I had to do this in firefox
about:config --> IPv6 --> disable.IPv6 true
With this tweak I was able to connect to the net. But when I use the Update Manager or Synaptic I am not getting connected, even if I use the cli and do
IWithout having made any configuration changes (that I am conscious of), for the past few days I have been unable to connect to my home network - and hence to the internet.My 64-bit Kubuntu (10.4) is on a dual boot machine.If I boot XP then things work as they have done for the past year or so - no network connection problems at all. So I know it's not hardware, LAN or router/cable-modem related. In addition none of the other systems on the network have a problem.
I tried to check if there are some firewall settings that might have changed - but cannot seem to find anything about the firewall in my Kubuntu set-up. Indeed I cannot figure out how to do any problem source identification.
I recently installed and now my wireless Internet isn't working.have a Dell Inspiron 1545 laptop, with the 1397 wlan mini cardI have read through other threads, but I was unable to solve the problem I am having (Stated below).I just installed ALL updates available and plugged in my computer to connect to the Internet.Now the wireless option is there, and so is my network, but when I select it, nothing happens
Just purchased a Dell Inspiron 580 MT tower pc with Windows Professional. However unable to connect to the network or the internet when I load a copy of Ubuntu Karmic on dual boot. Windows networking and internet working fine. Is this an ethernet adaptor hardware issue? Broadcom NetXtreme 10/100/1000 Gigabit Ethernet controller-PCI Express card Will try later connecting through a usb ethernet adaptor to see if this is really the problem.
I am using Belkin router and i connect with MAC ID only. When i connect with my Vista it works properly but when i reboot and try to connect with Ubuntu it's not connecting.
I looked for my Ubuntu mac id and i added that also but no use. It says it's connected and when i try to google it, the page not found
This is baffling me but I am easily baffled/baffeld? I carefully followed these instructions to install a a working driver http://ubuntuforums.org/showthread.php?t=760568. It all went fine, my wireless light came on and it detected my wireless network. I know my WPA2 code (I can connect on the same computer in windows 7) and my keyring code. but I still can't connect it whirs away for quite a while before giving up and saying not connected.[Code]....
The graphical option through the hardware drivers list 2 options, broadcom b43 wireless driver and the broadcom sta wireless driver None can be activated
The b43 displays: Sorry, installation of this driver failed.
Please have a look at the log file for details: /var/log/jockey.log
