I have a TP-Link WN851n ver2 with the ar922x chip. This just seems to drop out. it sometimes connects but not reliable. It is just plain annoying. I have to run windows to get any wifi to work properly.
View 1 RepliesMoving back to 10.04, I've been trying for DAYS to get my wifi working properly. I've been scouring the boards trying everything under the sun,including attempting to install a new kernal, also a complete wipe/reinstall. I hope I have better luck with 10.04 or I'm ringing the bell on Ubuntu all together.
View 4 Replies View RelatedI just installed Ubuntu 10.10 tryed 11.04 but didn't work, but in both my internet connection was a lot slower than it is on windows. I can connect to the wifi but i get 1/10 of the speed that i usually do and it keeps losing the connection. I'm using a MSI computer with a "802.11bgn 1T1R mini Card Wireless Adapter"
View 9 Replies View RelatedI've just got a TP-Link wn-851n PCI WLAN card, and the problem is that ubuntu can search for the network, but I can't join into the network after typing the password. I'm sure that it is correct as m Windows notebook is also using that network.
Taking a look in dmesg, and it start to loop this message after I joined the network.
Quote:
I have this annoying problem since day one.I am testing out Red Hat RHEL5, everything is fine except DNS look up.If I ping www.google.com, it doesn't work, ping ip address it all works;if I bring up browser, put www.google.com it doesn't work, can't find the name, however, simply put ip address there it works.My DNS seeting seems ok, and the DNS works from Windows box.
View 2 Replies View Relatedive got a windows partition and a ubuntu-10.10 partition. i just tried to reinstall windows on the first one - but things didn't work out properly. after the first restart the pc just hung in the first boot screen - it wouldn't boot from the windows cd or the harddrive. every time i restart the computer it just hangs in that screen. i can't even choose to boot from cd/usb to use a livecd and rescue my files on the ubuntu partition. its like the keyboard doesn't work anymore. ive tried both a usb keyboard and one of the old kind with the prongs. so i cant get into ubuntu.
here's the screen, it pops up a second after i restart. usually the pc just boots up a couple seconds later and i can choose beteen win/unbuntu; or i can just press 'esc' and choose to boot from usb. but now nothing is happening, the keyboard doesn't seem to work, and it wont go passed this screen.*edit* actually the keyboard is working, because ctrl-alt-del restarts the computer, but thats about it..
I'm runnig f 13 on my laptop, and it runs like a charm. But once in a while, the internet doesn't seem to work properly. It mostly works, but right now i am unable to reach certain pages such at google (which is annoying), whereas other pages like yahoo and this one works perfectly well.
View 2 Replies View RelatedI have a problem with new installed machine. i have installed RHEL5 2.6.18-92.el5xen kernel and configured 2 network cards.
DEVICE=eth0
BOOTPROTO=static
#HWADDR=xx:xx:xx:xx:xx:xx
ONBOOT=yes
NETWORK=192.168.6.0
NETMASK=255.255.255.0
[Code]...
I have recently set up two machines with F14 and on both, I am completely unable to make remote login via SSH work. openssh-server is installed and seems to work well:
I have already worked for hours on the problem now, using Google and trying numerous things, and still could not find any solution. On my other machine, which still uses F13, remote login works just fine. Is there any change in the default behaviour of the sshd I am not aware of? I would really appreciate your assistance!
We have a Blade server connected to a two internal ESM Cisco switch. We want to have a active-backup configuration with bonding. We follow the documentation and we hace configured the next:
Centos 5.5
ETH0:
[root etc]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Broadcom Corporation NetXtreme II BCM5709S Gigabit Ethernet
DEVICE=eth0
[Code].....
I have a Compaq Presario with an Atheros AR5002 wireless card. I just installed Karmic and the wifi is the only thing not working. Wireless does work in 9.04. Here's what I get with iwconf
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
[code].....
I have an Asrock A330GC, with onboard ethernet, and an Engenius PCI card for wifi.I installed ubuntu server 9.10 no problems, and it picked up my ethernet in the installation with no difficulties.I couldn't get 9.10 to do what i wanted, so I tried installing 8.4 instead. This however didn't pick up any of the drivers, so i couldn't get online.So i reinstalled 9.10, only to find that no couldn't find network in the installation.Absolutely NOTHING has changed, the ethernet cable still plugged in, and if i plug same cable into my laptop, it works fine.Any ideas people?ifconfig doesn't mention any eth0, just lo, with an ip of 127.0.0.1 and amask of 255.0.0.0 which i'm fairly certain means its dead
View 1 Replies View RelatedI have been trying to get 9.10 to work with my D Link DWA 125 USB WiFi antenna for days now. I have searched these forums as well as other forums for answers. I have tried all of the suggestions I have come across, some simple, some complex. Nothing works. I have tried ndiswrapper, blacklisting drivers, re-installing, modifying the 2870sta.dat file......nothing works (or maybe I'm doing it wrong...I don't know).
I have a fresh install of 9.10 .Can someone please walk me through this and show me what I'm doing wrong?
I have been trying to install the driver for my Intel 5100 wireless card. I got the "correct" driver from the Intel site for Linux, but cannot figure out how to install it even after reading READ ME. So I tried ndiswrapper and couldn't figure that out either. I can't find the files it is talking about.
View 7 Replies View RelatedI've bought this Blumax USB WLAN adapter 9009 (ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter). I was specifically happy to read in its specs that it supports Linux [URL].
However, it turned out that the co-packaged CD drive doesn't contain anything Linux-related, and the support page online has gzip package with many files I don't know what to do with [URL]. The online support swallowed my query and hasn't returned any answer.
So, now I am wondering what to do. I don't feel so competent as to be able to compile the drivers on my own, specifying several specific parameters. At least it doesn't compile with default params. how to move forward with this. Apart from returning the device, because I'm too far now from the place where I bought this.
Just reinstalled ubuntu 10.10 x86 on an old laptop.
The wireless doesn't seem to work and I have no idea how to solve this.
In gnome I can see NetworkManager display the network ESSID.
I have entered the key but no success, it tries to connect and then times out after about 1-2 mins.
I have tried to change the encryption from WPA2, to WPA to WEP to nothing but the same issue.
In a terminal/shell running ifconfig/iwconfig I can see eth1 as the networkinterface.
How can I investigate this further. If there was an IRQ collission or something it would not be showing the ESSID right?
I'm looking for a cheap and stable wifi card that will work with Ubuntu 11.04. My Linksys WMP300N is creating a conflict with the native Broadcom driver (causing the system to freeze after light network traffic) and ndiswrappper isn't working for 64 bit Ubuntu.
Does anyone own a relatively cheap (less than $40USD) PCI card that works flawlessly, or close to flawlessly with 64bit Ubuntu 11.04? I need to get off of this 35ft ethernet cord. Cat5 + crossing top of stairs = problem in the future.
In my laptop, after upgrade, wifi stop working.My laptop is Fujitsu-Siemens Amilo Pro V2065, wifi cart Philips 12127e (from IBM T41), linux kernel: 2.6.37-020637rc3.This card worked before upgrade, and work on windows Command lshw -c network return:Quote:
*-network:0 UNCLAIMED
description: Ethernet controller
product: AR5212 802.11abg NIC
[code]....
I can't connect to the internet as the wifi hasn't worked since I reinstalled Ubuntu 10.10...It might be a hardware problem as this problem occured, when I tried to install Windows 7 but it didn't work on my computer...than I decided to reinstall Ubuntu 10.10, but than the wifi just wasn't working...but it was working before the win 7 installation and during the installation win 7 recognized my wireless connections...and even when I tried installing win 7 AGAIN it still recognized them...but every time I want to install Ubuntu 10.10...wireless just doesn't work.
View 3 Replies View RelatedI have 10.04 lucid installed on a presario 2800t laptop(it's old and hasn't got much memory). Anyway, now I can't get my Netgear WNA1100 to work. I know it works right away with 11.04, but that isn't really an option for me. It's too slow on this old computer. get it working with 10.04?
View 9 Replies View RelatedI have a Sony VAIO VGN SR29VN with ubuntu 9.10; I am trying to make a wifi connection through WPA work, to no avail. WEP and open connections work correctly, but when I try to connect to a WPA network using TTLS via network manager, y get errors of this type:Current regulatory domain updated by AP to:ES
preceded by lots of "leaving channel xxxx intact" and followed by "disassociating by local choice".This Sony is using an Intel 5100 wifi; any idea of what's going on or how to fix it?
Got notebook HP 6530b with Intel 5100AGN PCIe WiFi module in and desktop ubuntu 10.04 from [URL].
Can i make this one works any way exclude ndiswrapper.
lshw -c network
http://img695.imageshack.us/img695/1...eenshot2th.jpg
lspci
http://img819.imageshack.us/img819/1...reenshothy.jpg
uname -r
2.6.32-23-generic
Fresh install Ubuntu 10.10 on Acer Aspire 5050 with new hard drive. I struggled to turn the Wifi's button turn on but led light always on. It does not detect wifi driver. I installed ndiswrapper to get Acer's Winxp driver: netathr.inf by Windows Wireless Drivers from Ubuntu Software download. It's same thing as ndiswrapper.
[Code]...
I have an HP lapton Pavilion dv3 (4120-ss) and I just can't enable the WIFI button code...
View 9 Replies View Relatedmy wireless network doesnt recognize that any network is around. The broadcom STA driver will not install and it says "Please have a look at the log file for details: /var/log/jockey.log" the jog file says
2011-07-09 21:21:33,921 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver
2011-07-09 21:21:33,987 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
[Code].....
I'm on 11.04, im on a macbook 6,2 i7. The wifi worked when i booted from cd but now it doesnt work once i installed.
I ran yum broadcom-wl and installed the driver for my card no problem. I connected to the internet just fine using my wifi thereafter.
When I shut my laptop down and booted sometime later, the wireless connection was gone and I didn't even see a wireless adapter in the networking applet.
I tried to run insmod wl and insmod wl.ko and that failed.
So... after using yum to install the broadcom drivers, how can I make that install 'permanent'; so I don't lose my wireless adapter each time I reboot?
Suddenly after a long time with fedora (now with fedora 15), bluetooth and wifi not working on my laptop (now I'm connected to cable), I checked the network in console doing this:#systemctl status network.serviceAnd response:network.service - LSB: Bring up/down networkingLoaded: loaded (/etc/rc.d/init.d/network)Active: failed since Sat, 03 Sep 2011 21:18:24 +0200; 1min 50s agoProcess: 2949 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)CGroup: name=systemd:/system/network.serviceInstead I do the same query with the bluetooth service and gives me all OK, but does not work, I do not
View 1 Replies View RelatedThe Wifi is connected to my router but it still will not let me access the Internet or any other Internet based operation. (I am running 10.04, I had just installed and and now am trying to get the internet connection running)
View 6 Replies View RelatedI have a Dell Mini 10v with a fresh install of latest Ubuntu Netbook Edition. I have enabled proprietary drivers in order to get the WiFi card to work and managed to connect at home, starbucks etc. Good stuff.
For some reason I can detect but not connect to the WiFi at work - I get prompted for the pword and after entering it the WiFi indicater will pulse for a while only to return to the pword prompt. yes, I have the right pword and can connect my iPhone and other laptops. I am really puzzled by this and really need to get on the WiFi at work - wired connection works.
my colleague has the same dell model with windows 7 installed and is able to connect fine - I really don't want that @@@@ installed just to get WiFi. I know password entry error is the obvious solution but I connect new windows devices to it routinely and had other people try too.
I have an HP DV6 3143se which has a Ralink 3090 wifi card in it.the only thing that doesn't work at the moment is the Wifi. I tried installing the Linux backports module, but the trouble is that sometimes, my home wifi network is shown on the list of available networks and most often, it's not. when the network does show up, and i click on it and enter my WPA2 password, it takes ages to handshake and then it tells me that my password is wrong. the same password works in windows 7 so something's not working.
when i try to disable and re enable wireless network on the network manager applet, i get a Wireless device not ready or Network manager not running message.
[Code]....