I have a Compaq Presario with an Atheros AR5002 wireless card. I just installed Karmic and the wifi is the only thing not working. Wireless does work in 9.04. Here's what I get with iwconf
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
[code].....
I have an Asrock A330GC, with onboard ethernet, and an Engenius PCI card for wifi.I installed ubuntu server 9.10 no problems, and it picked up my ethernet in the installation with no difficulties.I couldn't get 9.10 to do what i wanted, so I tried installing 8.4 instead. This however didn't pick up any of the drivers, so i couldn't get online.So i reinstalled 9.10, only to find that no couldn't find network in the installation.Absolutely NOTHING has changed, the ethernet cable still plugged in, and if i plug same cable into my laptop, it works fine.Any ideas people?ifconfig doesn't mention any eth0, just lo, with an ip of 127.0.0.1 and amask of 255.0.0.0 which i'm fairly certain means its dead
View 1 Replies View RelatedI have been trying to get 9.10 to work with my D Link DWA 125 USB WiFi antenna for days now. I have searched these forums as well as other forums for answers. I have tried all of the suggestions I have come across, some simple, some complex. Nothing works. I have tried ndiswrapper, blacklisting drivers, re-installing, modifying the 2870sta.dat file......nothing works (or maybe I'm doing it wrong...I don't know).
I have a fresh install of 9.10 .Can someone please walk me through this and show me what I'm doing wrong?
I have been trying to install the driver for my Intel 5100 wireless card. I got the "correct" driver from the Intel site for Linux, but cannot figure out how to install it even after reading READ ME. So I tried ndiswrapper and couldn't figure that out either. I can't find the files it is talking about.
View 7 Replies View RelatedI've bought this Blumax USB WLAN adapter 9009 (ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter). I was specifically happy to read in its specs that it supports Linux [URL].
However, it turned out that the co-packaged CD drive doesn't contain anything Linux-related, and the support page online has gzip package with many files I don't know what to do with [URL]. The online support swallowed my query and hasn't returned any answer.
So, now I am wondering what to do. I don't feel so competent as to be able to compile the drivers on my own, specifying several specific parameters. At least it doesn't compile with default params. how to move forward with this. Apart from returning the device, because I'm too far now from the place where I bought this.
Just reinstalled ubuntu 10.10 x86 on an old laptop.
The wireless doesn't seem to work and I have no idea how to solve this.
In gnome I can see NetworkManager display the network ESSID.
I have entered the key but no success, it tries to connect and then times out after about 1-2 mins.
I have tried to change the encryption from WPA2, to WPA to WEP to nothing but the same issue.
In a terminal/shell running ifconfig/iwconfig I can see eth1 as the networkinterface.
How can I investigate this further. If there was an IRQ collission or something it would not be showing the ESSID right?
I'm looking for a cheap and stable wifi card that will work with Ubuntu 11.04. My Linksys WMP300N is creating a conflict with the native Broadcom driver (causing the system to freeze after light network traffic) and ndiswrappper isn't working for 64 bit Ubuntu.
Does anyone own a relatively cheap (less than $40USD) PCI card that works flawlessly, or close to flawlessly with 64bit Ubuntu 11.04? I need to get off of this 35ft ethernet cord. Cat5 + crossing top of stairs = problem in the future.
In my laptop, after upgrade, wifi stop working.My laptop is Fujitsu-Siemens Amilo Pro V2065, wifi cart Philips 12127e (from IBM T41), linux kernel: 2.6.37-020637rc3.This card worked before upgrade, and work on windows Command lshw -c network return:Quote:
*-network:0 UNCLAIMED
description: Ethernet controller
product: AR5212 802.11abg NIC
[code]....
I can't connect to the internet as the wifi hasn't worked since I reinstalled Ubuntu 10.10...It might be a hardware problem as this problem occured, when I tried to install Windows 7 but it didn't work on my computer...than I decided to reinstall Ubuntu 10.10, but than the wifi just wasn't working...but it was working before the win 7 installation and during the installation win 7 recognized my wireless connections...and even when I tried installing win 7 AGAIN it still recognized them...but every time I want to install Ubuntu 10.10...wireless just doesn't work.
View 3 Replies View RelatedI have 10.04 lucid installed on a presario 2800t laptop(it's old and hasn't got much memory). Anyway, now I can't get my Netgear WNA1100 to work. I know it works right away with 11.04, but that isn't really an option for me. It's too slow on this old computer. get it working with 10.04?
View 9 Replies View RelatedI have a Sony VAIO VGN SR29VN with ubuntu 9.10; I am trying to make a wifi connection through WPA work, to no avail. WEP and open connections work correctly, but when I try to connect to a WPA network using TTLS via network manager, y get errors of this type:Current regulatory domain updated by AP to:ES
preceded by lots of "leaving channel xxxx intact" and followed by "disassociating by local choice".This Sony is using an Intel 5100 wifi; any idea of what's going on or how to fix it?
Got notebook HP 6530b with Intel 5100AGN PCIe WiFi module in and desktop ubuntu 10.04 from [URL].
Can i make this one works any way exclude ndiswrapper.
lshw -c network
http://img695.imageshack.us/img695/1...eenshot2th.jpg
lspci
http://img819.imageshack.us/img819/1...reenshothy.jpg
uname -r
2.6.32-23-generic
Fresh install Ubuntu 10.10 on Acer Aspire 5050 with new hard drive. I struggled to turn the Wifi's button turn on but led light always on. It does not detect wifi driver. I installed ndiswrapper to get Acer's Winxp driver: netathr.inf by Windows Wireless Drivers from Ubuntu Software download. It's same thing as ndiswrapper.
[Code]...
I have an HP lapton Pavilion dv3 (4120-ss) and I just can't enable the WIFI button code...
View 9 Replies View RelatedI have a TP-Link WN851n ver2 with the ar922x chip. This just seems to drop out. it sometimes connects but not reliable. It is just plain annoying. I have to run windows to get any wifi to work properly.
View 1 Replies View Relatedmy wireless network doesnt recognize that any network is around. The broadcom STA driver will not install and it says "Please have a look at the log file for details: /var/log/jockey.log" the jog file says
2011-07-09 21:21:33,921 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver
2011-07-09 21:21:33,987 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
[Code].....
I'm on 11.04, im on a macbook 6,2 i7. The wifi worked when i booted from cd but now it doesnt work once i installed.
I ran yum broadcom-wl and installed the driver for my card no problem. I connected to the internet just fine using my wifi thereafter.
When I shut my laptop down and booted sometime later, the wireless connection was gone and I didn't even see a wireless adapter in the networking applet.
I tried to run insmod wl and insmod wl.ko and that failed.
So... after using yum to install the broadcom drivers, how can I make that install 'permanent'; so I don't lose my wireless adapter each time I reboot?
Suddenly after a long time with fedora (now with fedora 15), bluetooth and wifi not working on my laptop (now I'm connected to cable), I checked the network in console doing this:#systemctl status network.serviceAnd response:network.service - LSB: Bring up/down networkingLoaded: loaded (/etc/rc.d/init.d/network)Active: failed since Sat, 03 Sep 2011 21:18:24 +0200; 1min 50s agoProcess: 2949 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)CGroup: name=systemd:/system/network.serviceInstead I do the same query with the bluetooth service and gives me all OK, but does not work, I do not
View 1 Replies View RelatedThe Wifi is connected to my router but it still will not let me access the Internet or any other Internet based operation. (I am running 10.04, I had just installed and and now am trying to get the internet connection running)
View 6 Replies View RelatedI have a Dell Mini 10v with a fresh install of latest Ubuntu Netbook Edition. I have enabled proprietary drivers in order to get the WiFi card to work and managed to connect at home, starbucks etc. Good stuff.
For some reason I can detect but not connect to the WiFi at work - I get prompted for the pword and after entering it the WiFi indicater will pulse for a while only to return to the pword prompt. yes, I have the right pword and can connect my iPhone and other laptops. I am really puzzled by this and really need to get on the WiFi at work - wired connection works.
my colleague has the same dell model with windows 7 installed and is able to connect fine - I really don't want that @@@@ installed just to get WiFi. I know password entry error is the obvious solution but I connect new windows devices to it routinely and had other people try too.
I have an HP DV6 3143se which has a Ralink 3090 wifi card in it.the only thing that doesn't work at the moment is the Wifi. I tried installing the Linux backports module, but the trouble is that sometimes, my home wifi network is shown on the list of available networks and most often, it's not. when the network does show up, and i click on it and enter my WPA2 password, it takes ages to handshake and then it tells me that my password is wrong. the same password works in windows 7 so something's not working.
when i try to disable and re enable wireless network on the network manager applet, i get a Wireless device not ready or Network manager not running message.
[Code]....
i'm running Ubuntu 10.10 32-bit on an Acer Aspire 3050 laptop with an Atheros AR5BMB5 WiFi card.
The problem i'm having is that the hardware switch to turn the WiFi on and off isn't working right. When I hit the switch to turn it off, the light doesn't turn off, and Ubuntu just disconnects from the network and searches for more WiFi networks - it doesn't say that the WiFi has been deactivated, and I don't think it is. When I hit the switch again, it finds my network and connects to it.
The lspci -v | less command gives me the following information for the WiFi:
Code:
08:04.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
Subsystem: AMBIT Microsystem Corp. Device 0418
Flags: bus master, medium devsel, latency 168, IRQ 21
[Code]....
It lists a different model of card, but it's using what I assume is the correct driver, so I don't know if that has anything to do with it. I've checked the card itself and it is a AR5BMB5.
I would like to fix it so the switch actually turns the WiFi off instead of just making it search for more networks (I assume it's not actually turning off), and perhaps make the light turn off as it should as well.
I have some serious trouble getting the Wireless connection working, using Fedora 13 on a Dell XPS M1710 laptop which has an Intel Pro Wireless 3945 ABG adapter. I have previously tried an earlier version of Fedora I think it was version 10, where it worked flawlessly out of the box, but all versions since then, simply wont work properly. I got the Fedora 12 64 bit working at some stage, after using hours and hours trying to get it working, and suddenly it did. Don't know what suddenly made it work, since I haven't made any new changes, just re-checked the old ones. But I needed to use Skype which is only in 32 bit, so I had to reinstall to a 32 bit version, and then couldn't get it working again.
I can get it to work with any Windows version, no problems. I have also tried with PCBSD version 7.x, 8.0 and today I tried the new 8.1 just to see if that worked to, an no problemos, it works perfectly out of the box, I could set it up in 5 minutes, even though I don't have any previous knowledge of PCBSD, other than a few short trial installs.
It has to be said that I am a newbee to any Unix/Linux, so I don't know how to troubleshoot properly, and have only tried a few things which I have picked up from other forums. But unfortunately nothing seems to work. The first thing I did after a clean install was I looked in the Fedora 13 documentation, that says I should check that the NetworkManager is controling the interface, I tried to start up NetworkManager but nothing happens, no reaction what so ever. I tried rebooting and then restarting NetworkManager, but no matter what I try, I won't work, not even if I am using the root account.
I noticed right after the install, that there was a choice of connecting to a hidden network in the lower right corner of the screen, but while I have been trying to get the NetworkManager to work, it has suddenly disappeared (I have disabled SSID broadcast on my Linksys router. I've tried to run lsmod and it seems like the right firmware is running, I think it was called IWL3945 or something like that. I think there were around 3 such modules running, plus a Dell module.
Another important note, before I even touched the the WIFI, I connected to the Internet via my normal fixed LAN connection, and installed all the updates that were available and rebooted the system. I am using an LinkSys WAG354G V2 ADSL router, where I have disabled SSID broadcast. Is there a kind soul out there, who has a good idea of what the problem is, or a good idea of how to troubleshoot it ? since a laptop without a WIFI connection is not of much use to me.
I am using fedora 12 with bcm4312 wireless card. But wifi is not detected by os. I am new to open source .
View 4 Replies View RelatedCan't get my WiFi to work on my HP. My WiFi chip is bcm4303 (rev. 2) this is a new thread from http://ubuntuforums.org/showthread.php?t=1400427&page=4 ) So, I reinstalled Ubuntu (fresh install) Activated the Broadcom b43leagacy Wireless driver. When rebooting, the WiFi LED on the On/Off switch blinks.
[Code]...
I have an Acer one with this peculiar operating system which I don't understand. I have had it a couple of years and it has hardly been used. It has always worked well and connected up to my WiFi until today when after it has booted I get 'internal fault. Hal has failed to initiate' and the Wifi connection does not work. I am perfectly familiar with Windows but I haven't a clue with this one. Have found a post on this forum relating to this fault but I am afraid it was double Dutch to me. I don't even know how to access it's inner system let along enter any commands.
View 4 Replies View RelatedI recently bought a HP g62x laptop for myself. It sports a decent Core i3 processor, 4 gigs of RAM and a 500GB HDD. It also came with Wireless-N, a real bonus because I am using a Wireless-N router. The chipset is a Ralink 5390. It came preinstalled with Windows 7, and everything works fine in there (obviously).
I then proceeded to install Ubuntu 10.10 x64 a few days ago (this is before Natty came out) and everything worked . . . except WLAN. So I plugged in via Ethernet and went looking and found that I clearly wasn't the first to discover this issue. I found a guide here that I followed to download the Ralink Linux driver (which is stated to support my chipset), configure, compile, and install. Everything went perfectly, I restarted; lo and behold, I have a list of access points. I went to connect to mine, entered the password, and now the animated "WiFi wave" logo keeps going indefinitely until you click it, and it freezes for a few minutes. It will unfreeze if you let it sit but clicking it causes the same freeze again.
I couldn't really care less about a WiFi icon freezing, but a.) it freezes everything else in the system up, not just the icon, and b.) it never actually completes the WiFi connection. I really, really don't want to be forced to use Windows because of a crappy WiFi driver!
Since Natty came out I installed that and I can't even compile the driver without fatal errors, so I reverted to 10.10 and everything is the same as it was before. Note that this is a clean Ubuntu 10.10 Desktop Edition 64-bit install, nothing updated/modified/changed besides (attempting) to install this driver.
i'd like to extend that ma intel wifi link 5100 is not detected no more after perform upgrade package( upgrade the kernel too ). when im using command 'lshw -C network' , there is appear to be detected, but not on command 'iwconfig' or even 'ifconfig' it just show nothin. also network-manager no longer show that ma wireless is work properly anymore.
the old kernel : 2.6.25-22 ( my wireless detected and usable )
the new kernel : 2.6.25-23 ( my wireless detected and unusable )
I just installed Fedora 15 yesterday and can't get wi-fi to work. When I click 'on' on the Wireless label, it goes back to 'off' immediately. When I open the Network Settings menu and disable Airplane mode, the Wireless connection goes on and then off immediately. I took a look at /var/log/messages and it shows this:
[Code].....
The auto connect feature of NetworkManager Applet (version 0.7.997) isn't working on my system. If the WiFi connection dies, Network Manager doesn't detect that the connection has been lost and try to reestablish the connection. I have to manually click on the WiFi hotspot to reestablish the connection. This appears to be the case both while the computer is running and when I first boot it up (i.e. when booting, if the first attempt at establishing a WiFi connection doesn't succeed, Network Manager doesn't retry or try another hotspot).Is this "normal" behavior for Network Manager? If not, does anyone know a fix? Here's some more info about my system:
Computer: Dell Inspiron 1318 laptop
WiFi Chip: Broadcomm BCM4238
Kernel Version: 2.6.31.12-174.2.22.fc12.x86_64
[code]....
