Ubuntu Networking :: Ethernet Installation - Could Not Get Realtek 8168 On Mother Board To Work On Gigabyte H55M-S2H Motherboard
Mar 5, 2010
I have installed Ubuntu 9.04
uname -r
2.6.28-11-generic
Checked cable/network with 386Box running Ubuntu 8.04 all OK. Could not get Realtek 8168 on mother board to work on Gigabyte H55M-S2H motherboard. I tried to install r8168 driver but no luck ... so I bought another Linux compatible card which turned out to be a RTL8139c (eth1) and the driver I am using on this is card is 8139too.
[Code]....
My preference would be to get the motherboard ethernet working but perhaps the card may be easier to get working. Anyway after searching the net for ideas and trying different things I've just about given up. I have reinstalled Ubuntu today so eth0 is back to using the r8169 driver. I'm no expert so my attempts at following other recipies have so far failed. From what I have read the 8139too driver should have worked with the RTL8139C chip so I have run out of ideas. I must be doing something wrong.
View 9 Replies
ADVERTISEMENT
Feb 9, 2010
How to install Realtek 8139 Ethernet driver? I tried downloading from realtek website. there is no driver for Realtek 8139. Although i downloaded the driver for 8168 for Linux, i could not install it after uncompressing the tar file
View 1 Replies
View Related
Oct 13, 2010
I have the following install situation:
Ubuntu 10.04.1 LTS in Desktop
Motherboard: Gigabyte H55M-S2H [url]
Procesor 4x Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz.
I sound is attached to the motherboard. It works fine in windows so hardware is fine.
With Hardinfo i get the next information:
Audio Adapter HDA-Intel - HDA Intel
I have followed a few tutorials trying to fix the problem without success.
I have just downloaded the driver is in [url]
I run ./install and i get the next error:
View 7 Replies
View Related
Dec 14, 2010
I want to start using Ubuntu again but I gave up ages ago trying to get it to work with my Gigabyte EP45-DQ6 motherboard.I cant run from disc and I can't install.If I try to run it just takes me to a black screen with blinking cursor and that's all it does.If I try to install, basically the same.I can't get anywhere doing anything, so where do I start?How can I get it working on my system?By the way, this is with the latest Ubuntu.No, it's not a corrupt download or burn. I tried to download and burn, didn't work.I ordered a free cd, it did the same.This is an issue that is NOT related to the disc or the download of Ubuntu.
View 9 Replies
View Related
Aug 13, 2010
Installing Fedora13 Kernel 2.6.33 killed my RealTek NIC. I found the following page which helped a little bit: [URL]. Unfortunately the card still does not work.
If I do
lsmod | grep r81
I get:
r8168 91833 0
So I am not sure the really the new module is loaded. Doesn't anybody have the realtek working with fedora13 ?
View 7 Replies
View Related
Apr 24, 2011
I have installed Fedora 14 on Intel's DH67BL mother board, which has a on board LAN port, Fedora 14 does not detect on-board LAN. Unfortunately, intel does not provide any driver support for linux OS :-(. However, if I install an additional LAN card, Fedora 14 detects it and everything works fine.
View 5 Replies
View Related
Aug 18, 2010
A friend of mine bought a prebuilt system from a local computer store that has the Gigabyte GA-H55M-UD2H motherboard and he says he can boot Fedora off the CD but cannot install it as it doesn't detect the harddrive.
I assume it can't detect the SATA Controller as I am pretty sure hard drives use a universal driver so the only way for it not to detect the hard drive is if the controller is not detected.
I was wondering if anyone here has this motherboard and has this problem.
I think I gave him a Fedora 12 CD. (EDIT: It's Fedora 11 judging by the filename of the ISO I have on my Desktop...)
I myself haven't used Linux in a while since I completed my Linux course and this game I play needs Windows, but I am trying not to play that game as much anymore though because of free time issues... I have an Ubuntu Dualboot but have become used to Windows again. I am gonna try using Linux in a VM to get accustomed to it again, this way I can play with different versions/distros and still have the Windows 7 host as a fallback is something doesn't work...
View 2 Replies
View Related
Jul 22, 2010
I have RHEL3 installed on my machine, It is having lot of data and 2 databases oracle and mysql are running on it. Now my cpu is having problem and it is going to be replaced by the new one. Hard disk is fine.
Whether the new CPU will be able to boot with the old hard disk. If not is there any way so that i can recover everything with the old hard disk. SO that i need not have to install any packages and configuration seetings after the replacement.
View 7 Replies
View Related
Apr 25, 2011
Did fedora 11 compatible to Geforce 95GT super? or did fedora 11 compatible to mother board SuperMicro X8SIE? bcoz I cant install my Video card.
View 7 Replies
View Related
Jan 7, 2010
Anyone know of a mother board with an onboard wireless nic that works with linux?
View 2 Replies
View Related
Aug 25, 2010
I run an ISP with various servers such as mail servers.Once something works I let it run forever. Thus I have a mail server running FC5 on a Mach Speed pm400 via chip set motherboard.Recently the motherboard died, and I had to use a back up board to get it going again.I am now out of back up boards and need to purchase a new set for the future.However the mail server software will not activate the IDE DMA on these newer boards because the chip set drivers are not in the last kernel package that yum would download for FC5.
1.) Is there an easy fix to this problem to get the DMA working?
2.) Do I have to download and compile a latest kernel (2.6.x) to get the right drivers?
3.) Since FC5 is fully modularized, is there an easy way to create a similar kernel from a download without having to manually turn all the modules on?
4.) CAn I simply use the original .config from my existing kernel in the new one?
View 3 Replies
View Related
Jun 22, 2010
I m unable to use my lan card on rhel5 linux lan card no :- is realtek 8168/8111
View 1 Replies
View Related
Feb 15, 2011
Realtek 8111 / 8168 LAN Driver will not install on RHEL 5
[root@localhost r8169-6.002.00]# make clean modules
make -C src/ clean
make[1]: Entering directory `/root/r8169-6.002.00/src'
rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers rset
make[1]: Leaving directory `/root/r8169-6.002.00/src'
make -C src/ modules
[Code]....
View 2 Replies
View Related
Mar 29, 2010
I am trying to switch from the video device built into the mother board, to a card i just put into my machine. I'm using gnome and don't know where to start. I shouldn't need new drivers (based on a possible misunderstanding) because I am going from a nvidia 6100 to a 8600. I have looked in various places like the control center but haven't had any luck. I just started using linux and have very little experience in the terminal. Issues with the current card are stopping me in my learning process.
View 9 Replies
View Related
Jun 2, 2011
I'm finishing setting up my new computer.I'm installing ubuntu 10.04.The motherboard is a gigabyte GA-H61M-D2-B3When I plug the computer into my stereo, I get a horrible scratchy buzzing.How can I get rid of it?More info on hardware: Quote:lspci -v | less gives a lot of output, including this:Quote:
0:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05)
Subsystem: Giga-byte Technology Device a002
[code]....
View 5 Replies
View Related
Jul 21, 2011
I'm running an ubuntu maverick server, and I'm having a slight problem with networking. I've only got one ethernet line running into my room, and I've got loads of computers. The server has 2 ethernet ports, one integrated into the motherboard, one on a PCI card that I took from my old server. The on board ethernet never worked on my old server- but I only tried it out post-install, it was hooked up to the card during install (For the record, networking on linux has *never* worked for me if I installed then plugged in the networking stuff after the fact). So I just used the card instead. Transferred the hard drive into a new machine, and lo and behold, it would only work after I transferred in the card from the old one. What I wanted to set up is a basic NAT system, where the network connection is routed through from my server to my main desktop- but when I run ifconfig, my card is not detected, just lo and eth0. How can I fix this?
View 3 Replies
View Related
Jun 23, 2011
I just performed a fresh install of Suse 11.4. It worked great except that the network communication would cut in and out intermittently. I managed to solve the problem posting it here for other users and for future suse releases. I will give the hardware I am running, the symptoms and the fix:
Hardware
=======
Motherboard: Gigabyte GA-H67MA-UD2H-B3
Ethernet controller: Realtek RTL8111E
Default module: r8169 (run lsmod to see loaded modules)
[Code].....
1) First make sure that linux kernel source is installed in your system (yast software management)
2) ensure that gcc is installed (yast software management)
3) Download the latest linux driver for RTL8111E from the realtek website The one that I am running is the 8168 driver version 8.024.00
4) unzip the tarball (creates a directory called "r8168-x.xxx.xx")
5) As root run the autorun.sh from inside the newly created "r8168-x.xxx.xx" directory
View 9 Replies
View Related
Jan 3, 2010
I have installed mandriva 2008 spring edition. In my home i am using bsnl broadband connection. But i cannot install drivers in mandriva linux. In ethernet properties it is showing me that unknown device.
View 2 Replies
View Related
Aug 2, 2010
I have decided to do away with windows for the obvious reasons. I have carried out a new instal of Ubuntu 10.04. on a formatted HDD in a Gigabyte GA-510UD atom mother board and have found that I can't install the M/B drivers from the indtall disk.
View 5 Replies
View Related
Nov 6, 2010
I could change and manipulate all the bios features before I put an administrator password on the bios. Now that I have put a password on the bios, even when I log-in with the correct password 90% of the motherboard settings are locked and un-changeable.
View 5 Replies
View Related
Oct 8, 2010
Can anyone recommend a Linux sound driver for the Gigabyte GA-P55-UD4P rev. 1.0 motherboard.
I've found hints of Linux and many sources for Windows drivers, but so far haven't turned up any candidates for my Debian Lenny system.
View 9 Replies
View Related
Jan 14, 2010
In bootseqence of linux, the first step is check the CMOSRAM(size 64bytes) setup for custmor setting. So i am just confused wether CMOSRAM is a part of motherboard or is a part of RAM itself.
View 4 Replies
View Related
Dec 26, 2009
I'm about to upgrade a server for a local non-profit, and am looking at a Gigabyte GA-P55-UD3L motherboard and an Intel Core i5 750 processor. Does anyone have any observations or experiences with SUSE on this platform?
View 7 Replies
View Related
May 17, 2011
my Ethernet card stopped responding a few days after installing Ralink Wireless Card Driver for Linux. I have tried installing the drivers from Realtek's site, but it fails. I also have tried reinstalling the network manager, and that still didn't help any. I have also tried looking online for any post or blog that could help, but that also turned up nothing. The Computer is a new 2010 / 2011 (bought it on new years eve) HP Pavilion desktop that came with windows preinstalled.
View 6 Replies
View Related
Jul 7, 2011
I have installed CentOS. I have two ethernet card (one onboard and one PCI). I am able to set ip for realtek ethernet card and my atheros(on board) is not shown in network ifconfig shows only one ethernet card (PCI) hen i gave the command lspci i got the following output
01:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)
03:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
View 4 Replies
View Related
Apr 8, 2010
I recently set up a Samba Server on a new Gigabyte (Desktop) Motherboard with support for SATA 3.0. I used a new 1T SATA 3.0 (6Gb) Hard Drive. The system is performing poorly, seems to have problems both opening and closing files (*.dbf).
Also will hold a file as open periodically (may be a Samba Issue).
Does the O/S have to support this standard, or is it a function of the Hardware...?
View 6 Replies
View Related
May 30, 2011
Today I realized that my newly installed Natty does not recognize the Ethernet port, I used to have it when I was working on the Ubutnu 10.10. The following is the output (only the network related part) of lshw command:
Code:
-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
[code]...
View 5 Replies
View Related
May 23, 2010
I am using DELL VOSTRO 1510 laptop , it has realtek r8169 ethernet card, i installed RHEL 5 in my laptop , i checked for the driver cd provided by DELL, they given one source rpm and two other rpm for ethernet card, i tried to install them through "rpm -ivh (path)/realtek-r8169 (full name).rpm " but it asking about dependency . i tried it by using yum also but still its not working.
also i tried to create binary rpm through source rpm, but it only generating spec not binary rpm, when i am using " rpmbuilt -ba (spec file) " its showing command not found error. RHEL5 have ethernet driver for realtek-8129 in their list but not for realtek-8169, i checked it in system-config-network window, now what to do, how do i install this rpm , i want to access net through RHEL 5.
View 1 Replies
View Related
Dec 12, 2008
There seems to be some trouble with 8139too not working in a previous post. Has anyone found a solution to this? ubuntu version 2.6.24 (Hardy Heron?). Followed all known possibilities but information is all mostly out of date. module 8139too.ok? does not load. Following makefile on 8139too.c supplied, after altering to suit my version, comes up with 3 pages of errors?. ifconfig shows nothing for eth0like the last person markjuggles i have hit a brick wall here. Am I wasting my time?
View 10 Replies
View Related
Jul 27, 2011
I just bought a gigabyte sniper motherboard and when I installed ubuntu 11.04 it does not recognize my internet bigfoot E2100 1 x Bigfoot Killer E2100 chip.
View 5 Replies
View Related
