OpenSUSE Hardware :: Switch From Video Device Built Into Mother Board To Card?

Mar 29, 2010

I am trying to switch from the video device built into the mother board, to a card i just put into my machine. I'm using gnome and don't know where to start. I shouldn't need new drivers (based on a possible misunderstanding) because I am going from a nvidia 6100 to a 8600. I have looked in various places like the control center but haven't had any luck. I just started using linux and have very little experience in the terminal. Issues with the current card are stopping me in my learning process.

View 9 Replies


ADVERTISEMENT

Fedora Networking :: F14 Does Not Detect Onboard LAN Card (DH67BL Intel Mother Board)

Apr 24, 2011

I have installed Fedora 14 on Intel's DH67BL mother board, which has a on board LAN port, Fedora 14 does not detect on-board LAN. Unfortunately, intel does not provide any driver support for linux OS :-(. However, if I install an additional LAN card, Fedora 14 detects it and everything works fine.

View 5 Replies View Related

Hardware :: CPU Mother Board Crashed?

Jul 22, 2010

I have RHEL3 installed on my machine, It is having lot of data and 2 databases oracle and mysql are running on it. Now my cpu is having problem and it is going to be replaced by the new one. Hard disk is fine.

Whether the new CPU will be able to boot with the old hard disk. If not is there any way so that i can recover everything with the old hard disk. SO that i need not have to install any packages and configuration seetings after the replacement.

View 7 Replies View Related

Red Hat / Fedora :: 11 - Compatible To Mother Board SuperMicro X8SIE ?

Apr 25, 2011

Did fedora 11 compatible to Geforce 95GT super? or did fedora 11 compatible to mother board SuperMicro X8SIE? bcoz I cant install my Video card.

View 7 Replies View Related

Hardware :: Mother Board With An Onboard Wireless Nic That Works With System?

Jan 7, 2010

Anyone know of a mother board with an onboard wireless nic that works with linux?

View 2 Replies View Related

Server :: Older Distributions Won't Recognize Newer Mother Board IDE DMA

Aug 25, 2010

I run an ISP with various servers such as mail servers.Once something works I let it run forever. Thus I have a mail server running FC5 on a Mach Speed pm400 via chip set motherboard.Recently the motherboard died, and I had to use a back up board to get it going again.I am now out of back up boards and need to purchase a new set for the future.However the mail server software will not activate the IDE DMA on these newer boards because the chip set drivers are not in the last kernel package that yum would download for FC5.

1.) Is there an easy fix to this problem to get the DMA working?

2.) Do I have to download and compile a latest kernel (2.6.x) to get the right drivers?

3.) Since FC5 is fully modularized, is there an easy way to create a similar kernel from a download without having to manually turn all the modules on?

4.) CAn I simply use the original .config from my existing kernel in the new one?

View 3 Replies View Related

Ubuntu Networking :: Ethernet Installation - Could Not Get Realtek 8168 On Mother Board To Work On Gigabyte H55M-S2H Motherboard

Mar 5, 2010

I have installed Ubuntu 9.04
uname -r
2.6.28-11-generic

Checked cable/network with 386Box running Ubuntu 8.04 all OK. Could not get Realtek 8168 on mother board to work on Gigabyte H55M-S2H motherboard. I tried to install r8168 driver but no luck ... so I bought another Linux compatible card which turned out to be a RTL8139c (eth1) and the driver I am using on this is card is 8139too.

[Code]....

My preference would be to get the motherboard ethernet working but perhaps the card may be easier to get working. Anyway after searching the net for ideas and trying different things I've just about given up. I have reinstalled Ubuntu today so eth0 is back to using the r8169 driver. I'm no expert so my attempts at following other recipies have so far failed. From what I have read the 8139too driver should have worked with the RTL8139C chip so I have run out of ideas. I must be doing something wrong.

View 9 Replies View Related

Ubuntu :: Built A Dvr Type Video Recording Device For Security Purposes?

Feb 4, 2010

Has anyone ever built a dvr type video recording device for security purposes? With multiple cameras recording?

View 1 Replies View Related

Ubuntu :: Removed Video Card To Switch To Onboard Video / Cannot Start Kdm

Jun 19, 2011

Got a bit of a problem where xorg can't start kdm. I pulled out a dying AGP card to try and switch to onboard video, and I think the previous configuration is gumming up the works.I've been running this system for quite a while, as you'll be able to tell from the version numbers.Would like to avoid having to transport my Amarok databases to a new server. I make heavy use of the song ratings and whenever I try to transport the database from the old system to a fresh build I have to spend hours relearning sql commands.Any ideas how to either fix the resolutions on the ATI or (preferably) get KDE to start on the onboard graphics?

View 3 Replies View Related

Hardware :: Is CMOSRAM Is Part On Mother Board Or Part Of RAM?

Jan 14, 2010

In bootseqence of linux, the first step is check the CMOSRAM(size 64bytes) setup for custmor setting. So i am just confused wether CMOSRAM is a part of motherboard or is a part of RAM itself.

View 4 Replies View Related

General :: Run On Built Computer With AMD Processor And On Board GPU?

Mar 13, 2011

I am trying to build a low cost computer, and over the last few days, I was interested in Linux as my OS to use. All I really need for the computer was the internet, word processors, and 3 games: "Wizard101", "Fusion Fall", and "Free Realms". Would Linux run on a built computer with an AMD processor and an on-board GPU? And would Linux run all of my needs/wants for this computer?

View 9 Replies View Related

OpenSUSE Multimedia :: Replace The On-board Sound Chip With An Add-on Sound Card?

Jun 14, 2011

I have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.

Anyone know which of these cards will work on Suse 11.4?

Sound Blaster X-Fi Titanium HD
Sound Blaster X-Fi Xtreme Audio
Asus Xonar DS

View 9 Replies View Related

OpenSUSE Hardware :: How To Add More Storafe For The Server On Switch Device Naming

Dec 18, 2009

I am using a QLA2462 and have got FC storage attached through a brocade switch. As soon when I add more storage for this server on this switch my device naming shifts and this new storage comes in between e.g. as sdb, and the other 2 go to sdc and sdd. I looked around but I can't find a good solution for SuSe 11.2.

View 2 Replies View Related

OpenSUSE Multimedia :: Switch Sound Device From Command Line In KDE

Jan 30, 2010

my computer is connected to my TV through HDMI using ATI HDMI output. I have written a small script to switch display from monitor to TV when a want to watch a DVD, but I didn't find how to switch sound from speakers to HDMI in command line. For the moment I have to open KDE system settings -> Multimedia and move sound devices by hand.

View 3 Replies View Related

Debian Hardware :: Graphics Card Is Overriding Built In Sound Card

Sep 5, 2011

I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx
when I run alsamixer I get Card:

HD-Audio Generic
Chip: ATI R6xx HDMI

[Code]....

View 3 Replies View Related

OpenSUSE Hardware :: Best Way To Switch Video Cards And Drivers

Jul 17, 2010

I would like to know the best way to swap out video cards from ati to nvidia. For example. In windows, I would uninstall the driver, switch the cards, boot into a low VGA windows session and install the new drivers, reboot done.

In sues, I'm wondering if I uninstall the drivers, after rebooting I might loose my Gnome desktop. And I guess at that point I'd be looking at a blinking cursor?

View 3 Replies View Related

OpenSUSE Hardware :: Switch Grapgics Card While Running Kde

Mar 19, 2011

I have 2 graphics card on my laptop, one is integrated another is addon. both are ATI. How I can switch between them while running kde/ in similar as we can do it in win?

View 1 Replies View Related

Ubuntu :: Cannot Switch Desktop Envierments And Gnome Is Ugly After Built Gtk+3.0?

Mar 26, 2011

i have Linux Mint, i was playing around with GTK+3.0, i rebooted then i wanted to switch desktop environments.i clicked the log off button but i saw the character 'E' appear all over the screen. everything just stopped at that point. i had to reboot. after rebooting i installed KDE with aptitude then changed from gdm to kdm. my computer would not boot. i burned a Ubuntu rescue remix live cd and reverted back to gdm. i can now boot. i ran Code:make uninstallin an attempt to revert back to GTK+2, it claimed to work. i rebooted GTK-3.0 was still installed. my desktop is very ugly. i can not change desktop environments and themes do not work at all, nor can i change colors. i want my old GUI back

View 1 Replies View Related

OpenSUSE Wireless :: Detect The Built In Wireless Card But Not Suse?

Dec 3, 2010

I have a Toshiba Satellite L550 laptop with Suse 11.3 dual booting with Windows 7. Windows can detect the built in wireless card but not Suse, what can I do to get the wireless recognized in Suse.

View 2 Replies View Related

Ubuntu Networking :: Disable An On-board Wireless Device?

Nov 15, 2010

I recently bought a new nettop and installed Ubuntu 10.10 Desktop. Unfortunately the on-board wlan is kind of crap so I bought a USB Wireless stick and since that stick has a pretty recent chipset ndis was needed to get the USB stick to work as wlan1.

The issue is I want to disable the on-board wlan (wlan0). The BIOS does not offer that option so it needs to be done in the OS I guess. My question is what is the best way of doing so? I've read something about blacklisting or editing 10-wlan.rules but I am unsure what the best place is and what to put there.

This the output of ifconfig:

Quote:

eth0 Link encap:Ethernet HWaddr 00:01:2e:2b:a7:b0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0

[code]....

View 2 Replies View Related

Programming :: Find Sound Device - To Work On An Embedded Board ?

Feb 1, 2010

I'm trying to get sound to work on an embedded board. The boot says ALSA is present and sound chip is present. So I try to open the device with:

The hardware manufacturer assures me the device is hw:0,0 so I set device to:

This gives me:

So I'm presuming the advice that I use hw:0,0 must be wrong? So I need to find a way of working out what the device id is. I've tried default, no effect, then tried the command asoundconf list, which returns an error. I'm using a min linux build on an embedded system (busybox) so is there a way to find my sound device.

View 2 Replies View Related

Slackware :: Software For Eeepc To Take Video With On-board Webcam?

May 31, 2010

I am using Eeepc 1000h with Slackware 13.1. I have found many threads talking about turning on/off the webcam on Eeepc, but only one gives a rather complicated way to take a picture(whose quality, according to the author of the thread, is quite unpredictable). There is a built-in 'digital camera' program of KDE to add cameras, in that way, perhaps one can control the camera to take a picture or a video, but I I don't know if the on-board webcam is among the list. One can use the camera when using Skype, but basically I want use the camera off-line. Is there any tool for Slackware to control the Eeepc webcam (as in Windows)?

View 14 Replies View Related

Networking :: Broadcom PCI Wlan Card On Alix Board

Nov 20, 2010

I'm having trouble setting up new Alix URL... system with a wireless card. I got the card from an old working Buffalo AirStation router. The card is a WLI-MPCI-G54 and is using Broadcom BCM4306 chip. I've installed Debian on the system.My goal is to make a wireless access point by using hostapd authentication service. I thought it might be a good idea to verify that the wlan-card is working properly first, but it can't seem to detect my local wlan.

View 1 Replies View Related

Ubuntu Networking :: On-board Ethernet Port Not Detected - Have To Use PCI Card?

Jul 21, 2011

I'm running an ubuntu maverick server, and I'm having a slight problem with networking. I've only got one ethernet line running into my room, and I've got loads of computers. The server has 2 ethernet ports, one integrated into the motherboard, one on a PCI card that I took from my old server. The on board ethernet never worked on my old server- but I only tried it out post-install, it was hooked up to the card during install (For the record, networking on linux has *never* worked for me if I installed then plugged in the networking stuff after the fact). So I just used the card instead. Transferred the hard drive into a new machine, and lo and behold, it would only work after I transferred in the card from the old one. What I wanted to set up is a basic NAT system, where the network connection is routed through from my server to my main desktop- but when I run ifconfig, my card is not detected, just lo and eth0. How can I fix this?

View 3 Replies View Related

CentOS 5 Networking :: On Board Network Card Refuses To Run Gigabit?

Jun 30, 2009

I've just set up a PC with CentOS 5.3 runing on near identical hardware to an existing 5.2 machine. Motherboard is Asus M2A-VM which I discover by chance generally works very well with CentOS. Ethernet is on board Nvidia.The older machine just did run gigabit speed without any intervention at all, rather to my surprise. The newer machine insists on running at 100 Mbit which is annoying as it is connected to a NAS through a gigabit dumb switch.

The obvious difference between the two is that ethtool on the older machine says that supported ports are TP, and so the port is TP. Whereas the newer machine says that supported ports are TP or MII and insists on running MII. I cannot change this with ethtool -s eth0 port tp. Perhaps not too surprisingly, mii-tool says that the supported speeds range up to 100 Mbit.

View 13 Replies View Related

Fedora Installation :: Enable Desktop Effects With Intel On Board Graphics Card On 10?

Jan 16, 2009

How to enable Desktop Effects with Intel on board Graphics Card on Fedora 10?

View 1 Replies View Related

OpenSUSE Install :: Add A New HDD More RAM And To Replace Video Card?

Aug 23, 2010

I am a newbie on Linux so please give me detailed answers! I am very pleased with OpenSUSE. I installed it without any problem on my desktop and it works very nice. At this time I use a dual boot system, because I still need Vista for some software but gradually I spend more and more in Linux and hopefully one day I will not need anymore Windows.

I desperately need to do some hardware upgrades. I simply want to add a new HDD, some more RAM and to replace my video card. I did this many time under Windows... could you tell me what I have to expect doing this in a dual boot system Vista + OpenSUSE 10.2 ?

View 9 Replies View Related

Debian :: GNU Separate Or Built In Codecs For Playing Video

Apr 20, 2010

Does GNU/Linux have separate video codecs like Windows has? Or all the codecs in GNU are built in video-players?

View 3 Replies View Related

General :: Video Player With Built-in Subtitle Search?

Oct 19, 2009

I'm really new to all these *nix stuffs but I already likes the software, the community and even the manuals) Can anyone help me with subject? I like watching all these good shows airing through bittorrent and on-line hostings but I don't know English as well as I think so I also need to download a lot of subtitles. Is there any media player for *nix with built-in online subtitle search, download and open?

View 3 Replies View Related

OpenSUSE Hardware :: Install Drivers For Easycap Dc60 USB Video Capture Device?

Jan 24, 2010

I'm making an attempt to install drivers for my easycap dc60 USB video capture device. Someone was good enough to make a driver project on sourceforge. Problem is I cannot get it compiled.

Code:
Building
make[1]: Entering directory `/home/jan-bart/Download/easycap_dc60.0.4/src'
make -C /usr/src/linux-headers-`uname -r` M=/home/jan-bart/Download/easycap_dc60.0.4/src modules
make: Entering an unknown directory
make: *** /usr/src/linux-headers-2.6.31.8-0.1-desktop: No such file or directory. Stop.
make: Leaving an unknown directory

[Code]...

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved