OpenSUSE Hardware :: Default Driver For Realtek RTL8111E Chip (Ethernet) Does Not Work
Jun 23, 2011
I just performed a fresh install of Suse 11.4. It worked great except that the network communication would cut in and out intermittently. I managed to solve the problem posting it here for other users and for future suse releases. I will give the hardware I am running, the symptoms and the fix:
Hardware
=======
Motherboard: Gigabyte GA-H67MA-UD2H-B3
Ethernet controller: Realtek RTL8111E
Default module: r8169 (run lsmod to see loaded modules)
[Code].....
1) First make sure that linux kernel source is installed in your system (yast software management)
2) ensure that gcc is installed (yast software management)
3) Download the latest linux driver for RTL8111E from the realtek website The one that I am running is the 8168 driver version 8.024.00
4) unzip the tarball (creates a directory called "r8168-x.xxx.xx")
5) As root run the autorun.sh from inside the newly created "r8168-x.xxx.xx" directory
View 9 Replies
ADVERTISEMENT
Jul 6, 2011
my NIC drives me crazy and I need some help to gather all relevant informations to file a decent bug report. Maybe someone could guide me through this process.My mainboard is an AsRock Z68 Pro3
[URL]
I use a dual-boot setup with Windows7 installed in parallel to Fedora 15-x64. Whenever I had Windows in use and jjust reboot the system into Fedora, the NIC does not work as expected. Instead it goes in an endless "em1: link up" loop which results in very low bandwith or even complete network timeouts. This happens in Firefox as well as with yum or ping.
Quote:
Originally Posted by dmesg
[ 58.763294] r8169 0000:05:00.0: em1: link up
[ 59.686773] r8169 0000:05:00.0: em1: link up
[ 61.936454] r8169 0000:05:00.0: em1: link up
[code]....
If I directly cold boot into Fedora (after the power cord has been removed and the system got completely re-initialized) there are no problems at alll and I get a fast and stable network conection. This also happens with other linux distributions, for example SysRescCD.
View 1 Replies
View Related
May 17, 2011
my Ethernet card stopped responding a few days after installing Ralink Wireless Card Driver for Linux. I have tried installing the drivers from Realtek's site, but it fails. I also have tried reinstalling the network manager, and that still didn't help any. I have also tried looking online for any post or blog that could help, but that also turned up nothing. The Computer is a new 2010 / 2011 (bought it on new years eve) HP Pavilion desktop that came with windows preinstalled.
View 6 Replies
View Related
May 30, 2011
Today I realized that my newly installed Natty does not recognize the Ethernet port, I used to have it when I was working on the Ubutnu 10.10. The following is the output (only the network related part) of lshw command:
Code:
-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
[code]...
View 5 Replies
View Related
Dec 12, 2008
There seems to be some trouble with 8139too not working in a previous post. Has anyone found a solution to this? ubuntu version 2.6.24 (Hardy Heron?). Followed all known possibilities but information is all mostly out of date. module 8139too.ok? does not load. Following makefile on 8139too.c supplied, after altering to suit my version, comes up with 3 pages of errors?. ifconfig shows nothing for eth0like the last person markjuggles i have hit a brick wall here. Am I wasting my time?
View 10 Replies
View Related
Mar 5, 2010
I have installed Ubuntu 9.04
uname -r
2.6.28-11-generic
Checked cable/network with 386Box running Ubuntu 8.04 all OK. Could not get Realtek 8168 on mother board to work on Gigabyte H55M-S2H motherboard. I tried to install r8168 driver but no luck ... so I bought another Linux compatible card which turned out to be a RTL8139c (eth1) and the driver I am using on this is card is 8139too.
[Code]....
My preference would be to get the motherboard ethernet working but perhaps the card may be easier to get working. Anyway after searching the net for ideas and trying different things I've just about given up. I have reinstalled Ubuntu today so eth0 is back to using the r8169 driver. I'm no expert so my attempts at following other recipies have so far failed. From what I have read the 8139too driver should have worked with the RTL8139C chip so I have run out of ideas. I must be doing something wrong.
View 9 Replies
View Related
Oct 9, 2010
Sound works with Jaunty Jackal. Does not work with Lucid Lynx. It appears that Lucid Lynx will only acknowledge that I have a modem as a sound card. I just want to add my RealTek ALC880 driver so the sound will work. I've made sure that I have audio privileges, I made sure that nothing is muted using alsamixer. I've been looking at threads and documentation for four days just to fix the sound issue and so I can be prepared in case this 'feature' ends up being continued in Maverick Meerkat and when I upgrade I can use M.M. with minimal fuss.
View 1 Replies
View Related
Apr 10, 2011
Since I was change my mainboard and sound chip of course kmix doesn't work, I can change the volume but it doesn't effect on output volume it look like kmix have 3 level, Mute, Low and high.
View 9 Replies
View Related
Sep 4, 2010
I have built-in-motherboard Ethernet with this MArvell 88e8059 chip. During CentOS 5.5 install it didnt find it. then i found some page here on forums which said how to install sk98lin driver, and several people reported it working after that. Their chips were 8056 and others.. So i decided that should probably work in my case too, i installed it, and then i could see it in Network COnfiguration manager.
But during reboot, it cannot obtain IP information, and in Network Config manager it is "Inactive", setting it to Active fails to obtain IP again...
View 7 Replies
View Related
May 22, 2010
I changed a mainboard so the network card is RTL8111/8168B Gigabit now. By "ifconfig -a", there is only io, no eth0.
I got a driver r8168.ko from: [URL]
After I insert the r8168.ko, there is eth0. Run "/etc/init.d/network restart", it reports "Determing IP information for eth0... failed; no link present, Check Cable", and I noticed the lights of network card and runter are all off. I can use "ifconfig eth0" now but it cannot connect to other machine.
It's Gigabit card and my runter is 10/100M. I tried "#insmod r8168 speed=100 duplex=1 autoneg=1" and "#insmod r8168 speed=100 duplex=0 autoneg=1", it can not get IP by DHCP either. I also build the .ko from Realteck source code, the behavior is the same.
if I need to do other configurations?
My CentOS is CentOS5, 2.6.18-8.el5 #1 SMP.
== BEGIN uname -rmi ==
2.6.18-8.el5 i686 i386
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
[Code].....
View 5 Replies
View Related
Sep 21, 2010
I just installed Ubuntu 10.04 on my Powerbook G4 1.5ghz 15", and the ethernet port on the laptop doesn't work. So I can't search for drivers to install.
Is there a way to either tether internet to the laptop using firewire? find the necessary drivers so I can transfer them?
View 2 Replies
View Related
Sep 12, 2011
I am running openSUSE 11.1 with modified Kernel. While trying to run make on the downloaded driver for the RTL2831 I am getting an error message that I do not full understand. That is:
Code:
linux-2c5j:~/rtl2831-r2 # make
make -C /root/rtl2831-r2/v4l
make[1]: Entering directory `/root/rtl2831-r2/v4l'
No version yet, using 3.0.4-41-desktop
[code]...
I am not sure what is required when the error is "first use this function". How can I use the function T_DIGITAL_TV if I first have to install my driver in order to use the stick?
View 1 Replies
View Related
May 23, 2010
I am using DELL VOSTRO 1510 laptop , it has realtek r8169 ethernet card, i installed RHEL 5 in my laptop , i checked for the driver cd provided by DELL, they given one source rpm and two other rpm for ethernet card, i tried to install them through "rpm -ivh (path)/realtek-r8169 (full name).rpm " but it asking about dependency . i tried it by using yum also but still its not working.
also i tried to create binary rpm through source rpm, but it only generating spec not binary rpm, when i am using " rpmbuilt -ba (spec file) " its showing command not found error. RHEL5 have ethernet driver for realtek-8129 in their list but not for realtek-8169, i checked it in system-config-network window, now what to do, how do i install this rpm , i want to access net through RHEL 5.
View 1 Replies
View Related
Jun 8, 2011
I have a Lenovo T410 laptop. I'm unable to find drivers for the ethernet card, the wireless card and graphics. I don't even know what hardware is installed in the system. Here is the product ID if it can help in identifying the hardware.
Product ID : 2516CTO
View 9 Replies
View Related
Feb 9, 2010
How to install Realtek 8139 Ethernet driver? I tried downloading from realtek website. there is no driver for Realtek 8139. Although i downloaded the driver for 8168 for Linux, i could not install it after uncompressing the tar file
View 1 Replies
View Related
Nov 3, 2010
I'm trying to get a Rosewill RNX-N250PC wireless card w/ ralink rt3062 chip to work in a new build. I am able to see the card in Device Manager, but can't get the driver to work despite trying many of the suggestions I've read elsewhere. I installed build-essentials and downloaded the driver from ralink. I unzipped the folder, and started to follow README as well as this thread rt3062 [URL]. So, I've adjusted MODE and TARGET as instructed in Makefile. I also adjusted the following sections of red text from Makefile:
ifeq ($(PLATFORM),PC)
# Linux 2.6
LINUX_SRC = /lib/modules/$(2.6.35-22-generic)/build
# Linux 2.4 Change to your local setting
#LINUX_SRC = /usr/src/linux-2.4
LINUX_SRC_MODULE = /lib/modules/$(2.6.35-22-generic)/kernel/drivers/net/wireless/
CROSS_COMPILE =
endif
Then I set HAS_WPA_SUPPLICANT=y and HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y in /os/linux/config.mk in the driver folder.
Then I code: $ make (also tried sudo make with same result)
and get:
make -C tools
make[1]: Entering directory `/home/das/2010_07_16_RT3062_Linux_STA_v2.4.0.0/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/das/2010_07_16_RT3062_Linux_STA_v2.4.0.0/tools'
/home/das/2010_07_16_RT3062_Linux_STA_v2.4.0.0/tools/bin2h
cp -f os/linux/Makefile.6 /home/das/2010_07_16_RT3062_Linux_STA_v2.4.0.0/os/linux/Makefile
make -C /lib/modules//build SUBDIRS=/home/das/2010_07_16_RT3062_Linux_STA_v2.4.0.0/os/linux modules
make: *** /lib/modules//build: No such file or directory. Stop.
make: *** [LINUX] Error 2
das@desktop:~/2010_07_16_RT3062_Linux_STA_v2.4.0.0$
View 9 Replies
View Related
Aug 23, 2014
I have this wired problem with my realtek rtl8101e ethernet. It keeps on disconnecting randomly with my router. My computer is connected to D-link router via LAN cable. This problem does not occur in my windows xp os.
I have to suspend and resume my Debian os (wheezy 7.6 KDE) to get the ethernet connection up everytime it disconnects with my router.
These are my ethernet details
Code:
Select allEthernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
Subsystem: Realtek Semiconductor Co., Ltd. Device 0123
Flags: bus master, fast devsel, latency 0, IRQ 42
I/O ports at e800 [size=256]
Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Memory at fdff8000 (64-bit, prefetchable) [size=16K]
[Code] ....
View 4 Replies
View Related
Oct 23, 2010
No wireless networking. The ethernet works fine, and the wireless interface itself works well in Windows 7 (dual boot). Tried: Ndiswrapper, notoriously quirky, does not seem to work with the XP driver (the oldest driver available for the RTL8191SE). The linux driver offered on the manufacturer's website lacks any installation instructions. I have no clue how to install a linux driver. SUSE seems to have two network managers that are constantly complaining about control: Network Manager and Yast. Neither are great and I am left missing my Ubuntu.
However, my audio only seems to work on SUSE. I have tried almost every distro on this machine. Ubuntu lacked sound and wireless, Fedora played startup sounds, but would not play an mp3 or wav file (fiddling with the mixer did not help). And Fedora also lacked wireless support. PCLinuxOS, my favorite, lacked sound and wireless. Tried some oldies too. ELE, DSL, Puppy, Ubuntu Netbook remix, Vector, Browserpuppy, Crunchbang, Cruncheee (just for experimental sakes) and probably others I am not remembering. So far, installing a free linux distro has cost me 14 dvd-R's and countless hours of installing, reformatting and reinstalling. Part of me really wanted crunchbang to work, as I love the minimalism and blacked-out theme.
I need wireless network access. The wireless light remains red in Linux and pressing the key does nothing to start the device. In Windows 7 it always lights white and works perfectly. Why hasn't SUSE adopted a gui for ndiswrapper? Other distros have it. Why is my brand new laptop, which is by no means abnormal in make or configuration, not 100% supported natively by any Linux distro? I just updated to the new kernel yesterday. So I should be running the most modern operating system available. Yet good-ol Windows 7 is my only fully functional environment.
View 6 Replies
View Related
Sep 6, 2011
I am currently running openSUSE 11.4 on my Toshiba A505 laptop. I'm not certain about the exact model number of the wireless adapter but I believe it's made by Realtek. It does not show up in my list of network connections in YaST so I assume I'll need a driver for it.
View 7 Replies
View Related
Feb 2, 2010
We've just bought a new Lenovo ThinkPad T510 in the UK, which includes the Qualcomm Gobi 2000 3G broadband chip on a mini PCI card, attached to a WWAN antenna (around the screen?).
I've done a lot of searching, and was not able to find a way to get this chip to work in Ubuntu 9.10. Can anyone point me in the right direction or provide some help here?
View 1 Replies
View Related
Sep 15, 2011
Broadcom wifi driver working only with Kernel-default, any way to get it work with desktop-kernel 3.1rc/3.0?
View 6 Replies
View Related
Jul 6, 2010
I`ve got a dual boot of win 7 and ubuntu 10.04. After I put the system to sleep in win7, it was unable to start the ethternet adapter back (Now after system boot, the lights around the ethernet port blink for a few times and then turn off. This repeats in a while). Now it is disabled in ubuntu too. Is there any way to start it again? It is a Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller.
View 3 Replies
View Related
Jul 2, 2009
I just checked the Realtek website and they have a new Linux Driver for the RTL8185. The new driver is dated 6/26/2009. So it is quite recent. I would have thought it might have gotten into FC11.
I have 2 questions. Has anyone tried it? What would be the steps to install it?
View 1 Replies
View Related
May 18, 2011
I hope I'm posting in the right forum here, but I'm trying to install a realtek wireless driver and make goes okay, but when I get to make install it says permission denied when trying to create a file in a folder near the end of the process. Is there anyway to fix this? What can I do?
View 2 Replies
View Related
Feb 16, 2010
Where can I get the Realtek ALC883 driver for Ubuntu?
View 1 Replies
View Related
Aug 28, 2010
How can i install Realtek HD Audio Driver??
I Downloaded The Driver From Realtek Website
http://img517.imageshack.us/i/20100827183305.png/
Then
http://img821.imageshack.us/i/98431356.png/
i dont know how to install this driver from this file
i want to use my Sound Card Features ( like Windows 7)
Ex.
http://smg.photobucket.com/albums/v1...ealtekHDMI.jpg
View 2 Replies
View Related
Apr 26, 2011
trying to get my little Encore USB wireless adapter to work on several flavors of Linux (Ubuntu 10,10, ElementOS, Xubuntu, and Puppy), I emailed tech support at Realtek. I asked where is the Linux driver for this product? I did this because there were no Linux drivers posted on their site and everyone here (and on Newegg) is jumping though hoops trying to get a working wireless connection with the Encore and similar dongles that use the RT8187b chipset. I didn't expect an answer, but felt better after my little vent. I get an email from Realtek with a driver. Realtek needs to promote Jerry -- a beacon of customer service in the age of the "get lost" school of customer relations. I have attached the driver below. Caveat: I have not yet compiled the driver, so I don't know much more about it than I've said already, although the archive appears to contain the source code.
View 3 Replies
View Related
Sep 30, 2010
Is it possible to do this? I'm just thinking maybe I can run KDE without using the GPU so that I can use the GPU for computation (CUDA). The system I'm thinking of using is a laptop with Nvidia GTX260M video card. I've seen people talk about frame buffer, but I don't quite understand it because it seems that some people are talking about using frame buffer even when they have a video card on their system.
View 9 Replies
View Related
Sep 27, 2015
I got a new laptop and I install Debian Jessie, but the SD Card reader is not working at all. When I list the devices with lspci it list the device:
07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5249 PCI Express Card Reader (rev 01)
View 3 Replies
View Related
Jul 25, 2010
I am using ubuntu 10.04lts on my compaq615 laptop, which has a realtek wireless card, with which I had a few issues to get it to work.
Here is what I had to do:
When I do this, it works beautifully, after setting my router to open I may add.
So, as I said it is probably the fastest wireless I have ever experienced, but my problem is this, everytime I switch my laptop on I have to re-install, starting at:
View 7 Replies
View Related
