Red Hat :: Unable To Enable LAN Card: Realtek 8168/8111

Jun 22, 2010

I m unable to use my lan card on rhel5 linux lan card no :- is realtek 8168/8111

View 1 Replies


ADVERTISEMENT

General :: Realtek 8111 / 8168 LAN Driver Will Not Install On RHEL 5

Feb 15, 2011

Realtek 8111 / 8168 LAN Driver will not install on RHEL 5

[root@localhost r8169-6.002.00]# make clean modules
make -C src/ clean
make[1]: Entering directory `/root/r8169-6.002.00/src'
rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers rset
make[1]: Leaving directory `/root/r8169-6.002.00/src'
make -C src/ modules
[Code]....

View 2 Replies View Related

Debian Hardware :: Atheros AR922X And Realtek RTL8168 / 8111 Error

Mar 14, 2016

I made the debian installation 8.3 more adapters wi fi and cable do not connect to the network ... How I could solve this?

View 0 Replies View Related

Fedora Hardware :: Realtek 8168 Does Not Work

Aug 13, 2010

Installing Fedora13 Kernel 2.6.33 killed my RealTek NIC. I found the following page which helped a little bit: [URL]. Unfortunately the card still does not work.

If I do
lsmod | grep r81
I get:
r8168 91833 0

So I am not sure the really the new module is loaded. Doesn't anybody have the realtek working with fedora13 ?

View 7 Replies View Related

Hardware :: Install Realtek 8139/8168 Ethernet Drivers?

Feb 9, 2010

How to install Realtek 8139 Ethernet driver? I tried downloading from realtek website. there is no driver for Realtek 8139. Although i downloaded the driver for 8168 for Linux, i could not install it after uncompressing the tar file

View 1 Replies View Related

Ubuntu Networking :: Ethernet Installation - Could Not Get Realtek 8168 On Mother Board To Work On Gigabyte H55M-S2H Motherboard

Mar 5, 2010

I have installed Ubuntu 9.04
uname -r
2.6.28-11-generic

Checked cable/network with 386Box running Ubuntu 8.04 all OK. Could not get Realtek 8168 on mother board to work on Gigabyte H55M-S2H motherboard. I tried to install r8168 driver but no luck ... so I bought another Linux compatible card which turned out to be a RTL8139c (eth1) and the driver I am using on this is card is 8139too.

[Code]....

My preference would be to get the motherboard ethernet working but perhaps the card may be easier to get working. Anyway after searching the net for ideas and trying different things I've just about given up. I have reinstalled Ubuntu today so eth0 is back to using the r8169 driver. I'm no expert so my attempts at following other recipies have so far failed. From what I have read the 8139too driver should have worked with the RTL8139C chip so I have run out of ideas. I must be doing something wrong.

View 9 Replies View Related

OpenSUSE Hardware :: Realtek NIC Installation - Unable To Configure The Network Card Because Kernel Device (eth0, Wlan0) Is Not Present

Nov 30, 2010

Installed a TP-Link TG-3269 Gigabit card in a machine running OS 11.3 32 bit, when I go into Yast, Network Devices, Network to try configuring the card I get this errormsg: Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details. Couldn't find any mention of the card in dmesg's output, (though the 8139 onboard card is in there) there is some stuff about pci host bridge but I don't know whether they would be relevant or not

The chip on the card says it's rtl8169sc but lspci lists it as being 00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8369 (rev 10) Done some googling and there don't seem be any drivers for a Realtek 8639 and it returns no matches from a search on realtek's site, but there is a driver there for rtl8169sc chips, which I downloaded and installed, no errors when installing it Even after a reboot I still get the same error in Yast's Network Settings screen, lspci still lists it as 8369 and the device isn't listed at all if I run ifconfig

View 9 Replies View Related

Ubuntu Networking :: Wireless Card Disabled, Unable To Enable It?

Jan 24, 2010

I can't connect to the Internet through my wireless card. Plus, it's disabled and I can't enable it. It's grayed-out in the Network Manager on the top panel.I ran this code in a terminal:

Code:
*****@ubuntu:~$ sudo lshw -C network
[sudo] password for ******:

[code]...

View 9 Replies View Related

Ubuntu :: Deluge WebUI Enable / Re-enable Subsequently Unable To Re-enable It (doesn't Appear In The Side Panel Again)?

Feb 10, 2010

I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?

View 3 Replies View Related

Ubuntu Networking :: Cannot Enable Realtek Wireless On Toshiba Satellite Pro L500 In 11.04

May 12, 2011

I have just installed Ubuntu 11.04 on my brother's Toshiba Satellite Pro L500 and have spent all day trying to get the wireless to work.

the laptop does not have a physical wifi-switch (it should switch on-off with Fn+F8, which doesn't work), the drivers seem to be installed, but I cannot 'enable wireless', and I found that it is 'Hard blocked':

sudo rfkill list all :

0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
but 'rfkill unblock all' does nothing.

[Code].....

View 9 Replies View Related

OpenSUSE Wireless :: 11.4 - Realtek Card Not Recognized

Mar 26, 2011

How can I get Suse 11.4 to see my wireless adaptor? Would love to get this working so I don't have to upgrade my old XP OS to Win 7.

linux@linux:~> /sbin/lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
Subsystem: CLEVO/KAPOK Computer Device [1558:4101]
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02)
Subsystem: CLEVO/KAPOK Computer Device [1558:4101]
Kernel driver in use: i915 .....

View 9 Replies View Related

Hardware :: Realtek Wireless Card Undetected

Nov 1, 2010

I have Slackware(x32) 13.1 installed on my computer. Everything runs just fine except it doesn't seem my wireless card.I looked around and found a driver on the Realtek website. But, after I installed it, linux wouldn't boot. It would just hang. The driver did help my get the card detected, though.

On lspci, I found:
02:00.0 [Realtek company name here] RTL8101E/RTL8102E
03:00.0 [Realtek company name here] Device 8172

On windows, it said I had RTL8191SE. I am confused as to which card I have and which driver I need.I reinstalled the driver and rebooted. I then turned off my ether card via bios. Then I rebooted. Linux then booted just perfectly. However, I couldn't get the wireless to work. I was freaking and then left to go do something else with my hands. Then I realized I had the card turned off.
I mentally punched myself. >.>

View 2 Replies View Related

Debian Hardware :: 6.0 RC1 And Realtek 8111C Network Card

Jan 22, 2011

I'm new to Debian, and new to Linux at all (well, I have used Linux sometimes in the past; Red Hat 7.1, Knoppix 3.6, Ubuntu, and some other distros but by no meaning I could call myself a real, full-time Linux user). But that's what I want to change. After some research I've decided on Debian. At first I wanted to download a stable build (5.0.7) but I've seen 6.0 RC1 was released just recently and I've changed my decision to get this version instead. Anyway, I'm currently downloading the DVD (slow connection, 2Mb/s only) and I've spotted this page in the meantime.

Thing that got my attention is "Potential installation problems with RTL8169-based network cards". I've checked my motherboard (Gigabyte GA-EP45-DS3) and I have Realtek 8111C on it. As far as I understand, it's not RTL8169-based but any real problems with my Realtek 8111C card, I don't want to install an OS from which I couldn't browse web. I know I had big issues with it while installing Mac OS X Snow Leopard but that's what I could expect when installing OS on unsupported hardware. So any way to install Debian 6.0 RC1 on a computer with Realtek 8111C network card?

View 2 Replies View Related

Ubuntu Networking :: How To Turn Off A Realtek Wifi Card

Feb 16, 2010

I have downloaded the driver installed it, and it works fine. But i can't get to turn it off. I do have the ability to unload the driver's kernel modules and the sysyem does not see my card after that. That's ok, but i'm thinking it still uses my battery power. The wifi led is always on no matter what i do. The fn+<wifi key> doesn't to anything.

View 8 Replies View Related

Ubuntu Networking :: No Internet On 9.04 With Realtek RTL8139 Card

May 21, 2010

I have installed 9.04 ( I currently have it on dual boot with Windows XP) and my problem is that I have no internet connection. I have a Motorola modem with a Realtek RTL8139 Family Fast Ethernet NIC network card ( it's a wired connection, btw) When I plug in the cable, there's a little animation, but after a while I get the message: Wired connection is not active (or something like that) Here's what I did so far:

1) I ticked the Wake-On-Lan option in XP, since I read it in the forums that I could solve my problem. It did not

2) I turned off my modem, rebooted my system.

3) I deleted the Auto Ethernet network, and plugged in the cable again...no use.

4) I did an ifconfig, since I know that is what you guys really want

evajulia@Derek:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:18:f3:ab:2b:3a
inet6 addr: fe80::218:f3ff:feab:2b3a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

[code]....

View 9 Replies View Related

Red Hat / Fedora :: Downloaded Realtek Rtl98192se For Wireless Pci Card

Nov 7, 2010

I have just downloaded realtek rtl98192se for my wireless pci card. after extracting the file, the user guide states to go to the top level of the directory and execute the command 'make' to compile the driver

I have done so but I get the error: make: *** /lib/modules/2.6.18-194.el5/build: No such file or directory. Stop. Make: *** [all] Error 2

View 9 Replies View Related

Ubuntu :: 10.04 - Detecting Realtek 8139 Wireless Card

Aug 24, 2010

It is detecting the wireless networks in the surrounding area but it isn't connecting.

View 11 Replies View Related

Ubuntu :: Sound Card [realtek] Didn't Work

Jan 7, 2011

i have MB:Gigabyte 770t USB and Cpu Phenom II x2 555 BE My sound card didnt work and i have no sound at alll. only hardware that reconized as sound output in my sound setting is 5700 series HDMI which blong to my VGA.

View 9 Replies View Related

Networking :: Realtek Rtl8185 Wireless Card Will Not Connect

Dec 26, 2010

Running Linux mint 10 After the installation the wireless connection worked but it was very weak and intermittent. The icon would show 1 bar or none. iwconfig showed the rate at 1Mb/s. The same card worked fine in windows and on a 32bit version of linux. Installed new driver from realtek. Now the iwconfig readings look good and the icons shows 2 and sometimes 3 bars. But it will not connect at all! I even turned off all security on my router but it would not connect.

View 14 Replies View Related

Networking :: Rpm For Realtek 8169 Ethernet Card Is Not Installing

May 23, 2010

I am using DELL VOSTRO 1510 laptop , it has realtek r8169 ethernet card, i installed RHEL 5 in my laptop , i checked for the driver cd provided by DELL, they given one source rpm and two other rpm for ethernet card, i tried to install them through "rpm -ivh (path)/realtek-r8169 (full name).rpm " but it asking about dependency . i tried it by using yum also but still its not working.

also i tried to create binary rpm through source rpm, but it only generating spec not binary rpm, when i am using " rpmbuilt -ba (spec file) " its showing command not found error. RHEL5 have ethernet driver for realtek-8129 in their list but not for realtek-8169, i checked it in system-config-network window, now what to do, how do i install this rpm , i want to access net through RHEL 5.

View 1 Replies View Related

Slackware :: Driver For Realtek RTL8188su Wifi - Card?

Jan 17, 2011

anyone tried to run wifi-card based on this chip? In coming days I will build myself a proprietary driver for 2.6.27.7 kernel. I mostly aware about patches for wpa_supplicant. Should I use a source for wpa_supplicant from slackware 12.2 distro or a new version? Do you know about any other prerequisities (requirements, dependencies) for building this proprietary driver?

View 2 Replies View Related

CentOS 5 Networking :: Looking For Realtek 8112L Card Setup?

Aug 23, 2010

I've done some research for CentOS and Linux support in general for this card, and I haven't found the answer I'm looking for. Does anyone use this card in a system of theirs, and, if so, how easy was it to set up? It's on an Asus M4A785T-M/CSM motherboard that I'm looking to purchase (Newegg link here for reference). I've seen a lot of Realtek cards have zero problems in Linux before, but I know each chipset is different.

View 4 Replies View Related

OpenSUSE Wireless :: 11.3 - Installing Realtek RTL8101 Network Card

Aug 27, 2010

I am having trouble getting a Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller to work on openSuSE 11.3. Most of the data for the problem is in this pastebin of the output of Framp's collectNWData.sh. I have also downloaded drivers for this card as detailed below.

Code:
stephen@linux-75on:~> zypper se -r drivers:nic -i
Loading repository data...
Reading installed packages...

Also, here is the more complete output of /usr/sbin/iwlist scan:
Code:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
pan0 Interface doesn't support scanning.

View 9 Replies View Related

Ubuntu Networking :: Realtek 8139 Wired Card Not Working?

Feb 23, 2010

I have no internet connection. I am running dual boot windows XP and ubuntu. The card works fine in windows, but doesn't work at all in Ubuntu. This is the card I am using Realtek rtl8139/810x Family Fast Ethernet Nic. I am using Ubuntu 8.10, codename intrepid. I hate windows because of the viruses I contract everyday, so I decided to use Ubuntu, but this does no good without networking. so I can get online. What I do now? It is an onboard LAN card, cable is plugged in a green light is on, ubuntu just doesn't recognize it.

View 2 Replies View Related

Ubuntu Networking :: Realtek Wireless Card Doesn't Work

Sep 12, 2010

I have a Toshiba Satellite series laptop, i get ubuntu on it, all works well but there's a problem, my wireless card doesn't work, it doesn't show me the aviable wireless network, my Wireless Card is an Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) but it works in windows. I used Ubuntu 8.04.4 LTS. When i run these codes that's what it shows:

[Code]....

View 4 Replies View Related

Ubuntu Networking :: EDUP 802.11n Wireless Card (RTL8188SU) Realtek?

Oct 12, 2010

I am trying to install EDUP 802.11n Wireless USB Install (RTL8188SU) on my recently installed ubuntu platform and I need a driver for it. I downloaded the one from the Realtec website and I got a bunch of files that I have no idea what to do with them. (h[URL]... I am compleatly new at Linux and I have no idea how to install anything. I am pretty nifty with Windows but this is my first time trying Ubuntu and Linux. So can I have some step by step guide to install this. I am good at following clear instructions correctly.

Aditional Info: I tired the hardware thing already or whatever its called and only NVIDIA drivers are there and my USB is not recornized because it needs a driver.

View 9 Replies View Related

Networking :: Ethernet Card Realtek 8139 Driver Does Not Install?

Dec 12, 2008

There seems to be some trouble with 8139too not working in a previous post. Has anyone found a solution to this? ubuntu version 2.6.24 (Hardy Heron?). Followed all known possibilities but information is all mostly out of date. module 8139too.ok? does not load. Following makefile on 8139too.c supplied, after altering to suit my version, comes up with 3 pages of errors?. ifconfig shows nothing for eth0like the last person markjuggles i have hit a brick wall here. Am I wasting my time?

View 10 Replies View Related

CentOS 5 Hardware :: Realtek 8169SC Network Card Not Working

May 28, 2010

I am not very experienced using Linux but I never had big problems with Ubuntu. Now I am busy writing my PhD thesis and therefore I had to install CentOS to use one lousy program that I could not get to work under Ubuntu. However, it seems to be quite fine and it is working well besides one fact: The network card stopped working. In the beginning it was working fine although the speed was only on the level of 100mbit. The switch and the LED on the card indicated gbit connection, though. I tried to install the driver for the 8168 card which reduced the card to 100mbit (indicated by the LED on the switch and the card).

Ethtool indicated it was gbit capable but I couldn't activate it. After reading more and more I figured I have to use the 8169 driver again and live with the 100mbit. Unfortunately, after uninstalling the old driver and reinstalling the driver 8169 the network isn't working at all anymore. The network-manager displays the card as inactive and when I try to turn it on it complains about the wrong mac address, which I am not able to change to the proper one. I am using CentOS 5.5 with the latest updates.

View 17 Replies View Related

Fedora Hardware :: Wireless Usb Net Card With A Realtek 8192su Chipset And Of Course It Is Not Recognized?

Aug 6, 2011

Ok a little confused here. I got this working in f14 no problems but anyway. I have a wireless usb net card with a realtek 8192su chipset and of course it is not recognized.Dloaded driver from realtek unzipped tarball. Ran make clean and no errors then ran make all and this is what I get same with make or make install.

Code:
[root@donnie rtl8712]# make all
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.38.6-26.rc1.fc15.i686/build M=/usr

[code]....

View 3 Replies View Related

Ubuntu Networking :: Wireless Realtek 8185 Card - Can't Make An Ad-hoc Network?

Jan 11, 2010

The card is recognized by Ubuntu 9.10 and I have it in the network manager. I followed one tutorial about creating an ad-hoc network and all looked good, until I actually wanted to connect (or to be more precise, my machine is a host for other computers). The wireless icon just loops endlessly, without connecting and eventually I get "Wireless network - disconnected" message.

So, the main issue here is - connecting! I just can't. Also if you know/have some good tutorial for ad-hoc,

Code:
ivan@ivan-desktop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"internat3"

[Code]...

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved