Ubuntu Networking :: Configure 10.10 Server With A Secured Wireless Network?

Jan 13, 2011

how to configure an Ubuntu 10.10 server with a secured wireless network? I installed everything while it was wired, but I need to get it wireless. I downloaded the desktop to see if it could help me in configuring the wireless network, but it didn't help. how to configure wireless internet on an Ubuntu 10.10 Server in the terminal, which is preferred, or in the desktop.

When I type the command iwconfig, it shows eth1 being me wireless device. When I try and edit it, nothing changes! I don't know what I need to change other than the ESSID and the WEP key. I'm assuming I need to change the access point too, but it doesn't let me. Is there any specific order they must be changed in?

View 1 Replies


ADVERTISEMENT

Ubuntu :: Connect To Secured Wireless Network With Ubuntu 9.04?

May 25, 2009

ok i downloaded Ubuntu 9.04 using Wubi ... so i am running both Vista and now Ubuntu 9.04

i have an Asus laptop and the wireless card is Intel Pro/Wireless 4965 AG or AGN

when using Ubuntu i can connect wired but unable to connect wireless even though the network manager is detecting my wireless network

i try to connect and after a while of trying it times out prompting me for my wireless information and even when i type it in it still tries but fails to connect and prompts me again

i am using WEP 128-bit security and i am using a Linksys router

does anyone know how to resolve this issue ... other than this so far Ubuntu is ok ... i like to keep my wireless secure so any known solution?

View 2 Replies View Related

Networking :: Masqueraded Network Cant Login On Yahoo Mail Or Any Secured Sites

Apr 23, 2010

I am now very confused as to why i cant login on any secured sites since my firewall is setup to masquerade technique in iptables. Of course i can browse normally to any normal http connection. I attached my firewall script.

I setup squid on the same box and configured browser to use that proxy. All is well, i can browse and login both normal and secured sites (ie yahoo mail)

View 2 Replies View Related

Networking :: Configure Wireless Network - Iwconfig

Feb 6, 2010

I still cannot access to internet. May I know why?

Is it due to the Error for wireless request "Set Encode" (8B2A)

The step i did:
1) iwlist eth1 scanning
2) sudo iwconfig eth1 essid shabana key s:xxxxxx
3) invoke firefox ... cannot surf

Do I need to set dhclient? how should I set? DO I need to enable wpa_supplicant?

iwlist eth1 scanning

sound like I was able to connect to ESSID:shabana. Is it true?

The linux is Centos 5.4

View 3 Replies View Related

Ubuntu Networking :: Configure Wireless PCI NIC In 10.10 Server?

Nov 12, 2010

I've installed 10.10 server edition on a box I just want to use for file storage/backup, uPnP server, etc. The area I need to put the box doesn't have ethernet as an option so I'm trying to get this wireless NIC configured. It's a Buffalotech WLI2-PCI-G54S which runs the Broadcom 4306 chipset. I've managed to get the drivers for the card installed via the instructions here: [URL]

The drivers are working properly as I can run

Code:
iwlist scan

and see all the wireless networks it detects. I found the info here: [URL] to complete the configuration, but I'm still unable to get it right. My wireless router is configured to use WPA2-PSK with AES. I could just try installing gnome and get the GUI network config, but would like to avoid that if possible.

View 5 Replies View Related

Networking :: Unable To Configure Wireless Network On Dell Laptop And Oracle System / Fix It?

May 26, 2010

I am a first time Linux user - though I've Unix and Windows experience. So though I can follow your most tech instructions, I'll need some hand-holding.

Need help getting my wireless network to work on my newly installed Oracle Linux on Dell laptop.

Not sure what wireless card is installed, or it's mac address (though I can boot into windows and get that info, I don't want to - it'll be kind of a let down if I can't fix it all thru Linux).

Install has detected a Broadcom wired card, but not the wireless. Funny thing is that it detected the Bluetooth.

View 3 Replies View Related

Networking :: Configure Network Traffic To Go Through Home Server?

Dec 28, 2010

How could I configure Ubuntu to be setup as follows...

Wireless Client ----> Wireless Router ----> Home Server ----> Internet

What is needed to make all of the wireless traffic go to my internet connection port. I will be having two ethernet cables plugged into the system one from the wireless router and one to my internet router.

View 1 Replies View Related

Ubuntu Servers :: Airport Card On A Wireless Network - Couldn't Auto-configure My DHCP Network

Aug 13, 2011

I've installed the Ubuntu 10.04 Server onto a PPC G4 Mac just for the experience of setting up a server. During the installation process Ubuntu couldn't auto-configure my DHCP Network. I'm using the airport card on a wireless network. How can I manually configure the network once Ubuntu is installed.

View 6 Replies View Related

Fedora Networking :: Unable To Connect To Wireless Networks And Unable To Configure Network

Jul 27, 2010

I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.

Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network

However, there is no Network option under System>Administration.

Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."

View 12 Replies View Related

OpenSUSE Wireless :: Configure Wireless From YAST> Network Settings?

Jun 24, 2011

I am trying to configure a wireless connection from YAST under the Network Settings tool.It doesn't seem to do anything. My USB wifi device is detected in YAST > Hardware and I am using the module it says Hardware is using. It doesn't seem to save the module under YAST> Network Settings> Network Card Setup. Is this tool broken or useless? It seems setting up WiFi should be easier than this. YAST should work shouldn't it?

View 9 Replies View Related

Ubuntu Networking :: Can't Connect To Secured Wifi

Apr 24, 2011

Wireless adapter is working OK because I can connect when network is unsecured, but when I try to connect to the secured wifi it just won't accept the password.

I can see available networks in Network Manager but can not connect. No error messages, just no connection.

Is there anything I can try to enable connection to the WEP secured router?

View 3 Replies View Related

Ubuntu Networking :: Cannot Connect To Wep Secured Router

Jul 4, 2011

I'm having a problem with my RTL8187 wireless card using NDISwrapper The problem is that I can't connect to my home router I tried everything and it won't let me Suggesting changing my security settings to WPA is not valid because my retarded brother won't let me do it, so is there anyway I can connect to this router??

View 1 Replies View Related

Server :: Wget Webpage Secured By Username / Password

Feb 18, 2011

I wish to download a webpage, which is secured by username and password, using WGET. The thing is there are many forms on that page and I dont know how to tell WGET which one should it send (by POST method) the parameters. I have solved it till this so far:
wget --post-data="predmet=xxx" --http-user="yyy" --http-password="zzz" [URL]
It gets through the authentication but it will not submit the form.

View 3 Replies View Related

Ubuntu Networking :: Booting Up The Server Doesn't Connect To The Wireless Network?

Oct 5, 2010

i'm experiencing some weird behaviour: I have a server running ubuntu 10.04 and two Apple laptops in my home network. Sometimes after booting up the server doesn't connect to the wireless network, but instead "kills" the connection of the laptops. (The network then isn't available for about two minutes - it's showing but it can't connect) On the server the network interface is up, but not associated.

Sometimes the interface isn't configured properly (iwconfig isn't showing an entry) - but in this case the behaviour obviously isn't showing. some information about my system:

Ubuntu Version: Server 10.04x64
Wireless Card: Netgear WG311v3 with marvell chipset
Driver: ndiswrapper+mrv8335x64

View 4 Replies View Related

CentOS 5 Server :: Apache Mod_security Looking For Atomic Secured Directory?

Mar 6, 2010

I wasn't sure if this is the right place to ask or comment on this, but since it's about Apache web server I thought it should work. I finally figured out how to set up and bring up the site using virtual hosts in Apache, though at the moment it's just for my localhost install.

I set them up so I can have a place to play with possible new themes and/or test out the Drupal 7 alpha / beta releases without messing up my current configuration. I decided to look at the error logs for the currently configured site and it had a lot of messages similar to the following:

[Sat Mar 06 09:45:39 2010] [error] [client 127.0.0.1] ModSecurity: Unable to retrieve collection (name "ip", key "127.0.0.1"). Use SecDataDir to define data directory first. [hostname "site.local"] [uri "/"] [unique_id "ZnUHgsCoAAEAABdzR2QAAAAB"]

View 4 Replies View Related

Ubuntu Networking :: Cannot Connect To WPA2 Secured Networks After 10.10 Upgrade?

Oct 13, 2010

Unsecured and WEP networks are fine. I do not have a WPA network to test on, but my school's WPA2 Eduroam network does not work. It tries to connect before asking again for my credentials, and this repeats. I'm on 64-bit 10.10 Ubuntu upgraded from a live CD install of 10.04. Laptop model is Acer Aspire 5741-5193. Output of lspci:

Code:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)

[Code]...

View 9 Replies View Related

Fedora Networking :: No IP Address From DHCP Server On Wireless Network?

Feb 12, 2009

I have installed Fedora 10 on my A860 Dell Vostrol Laptop with AR242X Atheros Wireless card. Wireless card worked out of the box and i could detect wireless network and connect to it. But i have a problem that, my wireless connection is not able to get IP address from the DHCP server. Please help me out what can i do to get this working. I am using WEP security and authentication is open system.

I have windows 7 beta installed on the same machine and on that wireless network works fine so i am sure that there is no problem with the wirless network. I am using DIR-300 router from D-LINK. I tried to see packet log on wireshark and there i see that there is no reply to the DHCP discover message. Actually i don't see any RX packets at all. Which is not normal as there is traffic on the network.

View 14 Replies View Related

General :: Iwconfig - Can't Configure Wireless Network

Mar 6, 2011

I've beenhaving some trouble getting my wireless network card working on my Slackware 12 box. Currently it identifies the card and can scan for networks, but I can't seem to join a network. Here's some output:

{8:46:29}gibson:/lib/modules/2.6.33.4-smp## iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: F8:1E:DF:FF:DA:39
ESSID:"MasterControl"

[code]....

It doesn't seem to be accepting the essid setting, and it's giving an error for the key setting. Also, I'm noticing an inconsistency in the wireless protocols. The AP claims that it's 802.11g with rates up to 54 Mb/s. But it should be 802.11n. It's an Apple Airport Extreme and the Radio Mode is set to Automatic and displays "802.11a/n-02.11b/g/n" on the Airport Utility. The interface also claims that it's 802.11g, though shows a rate of 300 Mb/s. It's a Belkin "Play" Wireless USB Adapter (F7D4101).

(Note: I'm using ndiswrapper and the WinXP drivers which were installed from the Belkin software.)

View 1 Replies View Related

General :: Unable To Configure Wireless Network On Red Hat 5.0?

Oct 8, 2010

I HAVE DUAL BOOTING SYSTEMVISTA + RED HAT 5.0ON VISTA I CAN RUN WI FIBUT ON RED HAT IT CANT WORK AND SAYS CANNOT ACTIVATE NETWORK DEVICE eth13c501 device eth1 does not seem to be present delaying initialisation.

View 1 Replies View Related

Slackware :: Configure A Wireless Network With WAP Key But It's Not Working

Feb 23, 2011

I was trying to configure a wireless network with WAP key but it's not working!

Quote: Error for wireless request "Set Nickname" (8B1C) : SET failed on device wlan0 ; Operation not supported.

rc.inet1.conf
Quote:
IFNAME[4]="wlan0"
IPADDR[4]=""
NETMASK[4]=""
USE_DHCP[4]="yes"
DHCP_HOSTNAME[4]="guihost"

[Code]....

View 10 Replies View Related

Fedora Networking :: Wireless - Shows Up In The Network Manager - Does Not Get An Ip Address From DHCP Server

May 24, 2010

I'm using a D-Link Xtreme N PCI express wireless adapter (DWA-556). It shows up in the network manager.

However it does not get an ip address from the DHCP server. Below is what I get in the messages log:

View 1 Replies View Related

OpenSUSE Wireless :: Manually Configure Network Interfaces?

Nov 20, 2010

I'm building a wireless router based on OpenSuse 11.3 I have experience with Debian, but here I'm confused howto manually configure network interfaces. I need my wireless card to work in master mode, so I need to place

[Code]...

View 3 Replies View Related

General :: Configure A EDUP Wireless Network Card?

Aug 8, 2011

How do I configure a EDUP wireless network card

View 1 Replies View Related

General :: Command Line To Check For A Specific Email - By Subject - On An SSL Secured IMAP Server?

Feb 1, 2011

Anyone know a simple command line to check for a specific email - by subject - on an SSL secured IMAP server?

View 2 Replies View Related

CentOS 5 Networking :: Configure Server1 To Have A Different Hostname On The Standard Network Than On The Virtual Network?

Oct 5, 2010

I have a server that is on both a standard network and a virtual network, as follows: server1 attached to standard network server1 acting as Dom0 with two linux DomU guests (under Xen) I only have one network card. How do I configure server1 to have a different hostname on the standard network than on the virtual network? Here are the relevant network configuration files for server1:

/etc/sysconfig/network-scripts/ifcfg-eth0:1
DEVICE=eth0:1
BOOTPROTO=none
NETMASK=255.255.255.0
IPADDR=192.168.122.9

[Code]...

View 1 Replies View Related

Networking :: Configure A Network Route To A Host For Testing Network Interface?

Aug 30, 2010

today I tried to configure a network route to a host for testing my network interface. Code: route add 192.168.1.15 eth0 As I have to eth interfaces and both interface got their IP from DHCP (192.168.1.11 and 192.168.1.12) and are in the same subnet, I shut the other interface down:

Code: ifconfig eth1 down Then I tried to test the interface by doing a ping to 192.168.1.15.
Problem: When I unplug the cable from eth0 (and eth1 is still plugged) the ping still works. Somehow my linux (it's debian) powers up again eth0 and pings over this port.

How can I stop my linux doing this. I just want to have the route added only on the one interface - not the other. Is it maybe some case of a default-gateway?

View 5 Replies View Related

OpenSUSE Network :: Configure Belkin Wireless USB Adapter (F7D2101)?

May 26, 2010

configure my Belkin Wireless USB adapter(F7D2101)? I attached the adapter and rebooted the system. I used the hardware info and it is listed but no drivers.

View 1 Replies View Related

OpenSUSE Install :: 10.3 Network - Configure Ethernet Connection Or Wireless Card

Oct 2, 2010

I installed 10.3 (after buying it a couple of years ago and letting sit on the shelf) and can't get it to configure my ethernet connection or my wireless card. Yast doesn't include a list of available cards, and the error I get in installation-network setup is that the kernel isn't present. The machine I'm installing this on is a Lenovo, in which there isn't a discrete ethernet card (it's in the motherboard), but my wireless card (a Cisco LINKSYS 802.11G) is a discrete card. Because I'm divorcing Microsoft for a number of valid reasons, I don't have Windows available on that box.

View 4 Replies View Related

Networking :: Configure The Wireless (broadcom) On Laptop - Arch Networking Completely Gone

May 15, 2011

I until yesterday when trying to configure the wireless (broadcom) on my laptop could browse the internet and install packages normally. but now none of the connections are working

[Code]....

View 2 Replies View Related

Ubuntu Networking :: Set Up Wireless Connection - Configure?

Jan 1, 2010

i just successfully downloaded and installed ubuntu koala (9.10 i think...) and its a great interface. i am just having extreme difficulty trying to set up the wireless connection. when i log back in osx, i am able to access the router and use the internet as i am doing now when i post in the forum. i am just trying to learn how to configure the wireless in ubuntu as well. have someone who has successful been able to connect wirelessly on an imac, or apple laptop in ubuntu.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved