CentOS 5 Server :: Apache Mod_security Looking For Atomic Secured Directory?
Mar 6, 2010
I wasn't sure if this is the right place to ask or comment on this, but since it's about Apache web server I thought it should work. I finally figured out how to set up and bring up the site using virtual hosts in Apache, though at the moment it's just for my localhost install.
I set them up so I can have a place to play with possible new themes and/or test out the Drupal 7 alpha / beta releases without messing up my current configuration. I decided to look at the error logs for the currently configured site and it had a lot of messages similar to the following:
[Sat Mar 06 09:45:39 2010] [error] [client 127.0.0.1] ModSecurity: Unable to retrieve collection (name "ip", key "127.0.0.1"). Use SecDataDir to define data directory first. [hostname "site.local"] [uri "/"] [unique_id "ZnUHgsCoAAEAABdzR2QAAAAB"]
View 4 Replies
ADVERTISEMENT
May 13, 2009
Once the mod_security module gets loaded to apache, autoindexing stops to work. In a folder without index.html the server says: 403 Forbidden You don't have permission to access /TheFolder/ on this server. I was trying to find something to comment out in the /etc/httpd/modsecurity.d and in the modsecurity.conf files .. but couldnt find anything relevant. how to have mod_security on with haveing autoindexing on aswell?
View 3 Replies
View Related
Apr 8, 2011
I'm having trouble applying a CSS file to my Apache directory listings. I am running Apache 2.2.3, and have the following lines in my httpd.conf file:IndexOptions FancyIndexing FoldersFirst IconsAreLinks IgnoreCase VersionSort NameWidth=* HTMLTable IndexStyleSheet "css/dir.css"
View 2 Replies
View Related
May 19, 2010
have two shared variables a,b which are related to each other.When multiple applications share these shared variables, access to them needs to be an atomic operation, otherwise the relation may break. So to ensure mutual exclusion, I'll put their modification under a critical section protected by lock.
Code:
critical_code
{
P(mutex)
a := something
b := something
V(mutex)
}
Lets say my hardware/OS/compiler supports atomic variables. Then I modified my above code as follows.
Code:
code
{
atomic a := something
atomic b := something
}
Can this code ensure mutual exclusion, when accessed by multiple applications?
View 2 Replies
View Related
Mar 10, 2010
Consider this stanza for a directory on my Apache server:
<Directory "/var/www/html/mine/wedding">
Options FollowSymLinks
Order allow,deny
Allow from all
AuthType Basic
AuthUserFile "/etc/httpd/htpasswd_file"
Require user username
</Directory>
View 4 Replies
View Related
Oct 14, 2010
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
View 7 Replies
View Related
Mar 12, 2011
When I'm recompiling apache and php, it doesn't go through and I get this error:
Code:
checking for atomic.h... no
/usr/include/mysql/my_global.h:364:24: error: asm/atomic.h: No such file or directory
[code]....
View 5 Replies
View Related
Sep 24, 2010
I created a website in my apache server. I just need to secure that when everyone try to access any folder on my root directory, it will show "Forbidden".
View 3 Replies
View Related
Mar 29, 2011
I am having a problem getting Apache to serve out a directory. If I place an index.html in the Document.Root I can see that page. When I remove the index.html I only see the test page for Apache. the relevant section form my httpd.conf. I am not using virtual hosts just setting up one Apache instance.
As you can see from the below I have enabled Indexes so I am at a loss :-(
ServerTokens OS
ServerRoot "/etc/httpd"
PidFile run/httpd.pid
Timeout 120
KeepAlive Off
MaxKeepAliveRequests 100
[Code]...
View 3 Replies
View Related
May 4, 2011
just wondering, if i type in a url like this:
how can i get it to direct to:
View 1 Replies
View Related
Aug 26, 2010
I want to view directory content in apache server, for that i configure apache server, but i don't know how to enable autoindxing module, only apache test page is opening when i open my web site.
View 9 Replies
View Related
Feb 18, 2011
I wish to download a webpage, which is secured by username and password, using WGET. The thing is there are many forms on that page and I dont know how to tell WGET which one should it send (by POST method) the parameters. I have solved it till this so far:
wget --post-data="predmet=xxx" --http-user="yyy" --http-password="zzz" [URL]
It gets through the authentication but it will not submit the form.
View 3 Replies
View Related
Jan 20, 2011
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
View 3 Replies
View Related
May 20, 2010
I've set up Apache once or twice in the past, but my memory is escaping me on something simple. This time the OS is Cent5 with Apache/2.2.3
When a user browses to: [url] <nothing else> I get as expected, a '403 'You don't have permission to access' because directory browsing is off for obvious reasons :-) If I enter the full URL to the script: [url]it works as expected. No issues there.
What I would *like* to do (and I'm sure I've done this before) is to set the cgi-bin up so if someone leaves off the script name: http://host.name/cgi-bin/ it serves "index.cgi" pretty much in the same way that if you browse to the root http directory, you index.html||php would normally serve. I just can't remember how to achieve this simple thing and I'm starting to wonder 'am I mad? - Did I do this before?'.
Sanity check - index.cgi exists and runs if you call it directly thus:
Code:
I have added:
Code:
That made no difference.
Tried:
Code:
For good measure, but that made no difference - and even
Code:
and no amount of playing with 'Options Indexes || -Indexes || +Indexes' helped me.
Like I say, I'm sure I've done it before (on Debian/Ubuntu) without the need to start playing with redirects or .htaccess - but I'll be blowed if I can remember how.
View 2 Replies
View Related
Dec 10, 2010
I'm trying to get Apache to run in a user's home directory. I changed the conf file so that Apache runs under the user and group "kiosk" and changed the DocumentRoot and Directory from the default to "/home/kiosk". Then I set Apache to start at boot (chkconfig --level 235 httpd on) and rebooted. When I checked, httpd is running as kiosk like it should (ps aux | grep httpd). However, when I try wget localhost, I get a 403 response back. If as root I call "httpd -k stop" and then "httpd -k start", then everything works exactly as it should (curiously, if I try using "-k restart", it still doesn't work). After this, httpd still shows as running as kiosk and if I check before calling start, it shows no httpd processes running as expected.
This only happens when I use httpd to stop and then start the web server. If I try to restart using apachectl I still get a 403 error. As an interesting aside, after I've used httpd, if I try using "apachectl restart" I get a "(13)Permission denied: Error retrieving pid file run/httpd.pid" error. This is all on a freshly installed CentOS 5.5 server. Why I'm seeing this very different behaviour from what I thought were just equivalent ways of starting Apache? And then what I could do to get it to start up and run properly on boot? One last item to mention is this isn't a permissions problem. I set the permissions to 777 to both the home and kiosk directories (and 666 to the web files) just to be sure that's not the problem.
View 4 Replies
View Related
Jan 13, 2011
how to configure an Ubuntu 10.10 server with a secured wireless network? I installed everything while it was wired, but I need to get it wireless. I downloaded the desktop to see if it could help me in configuring the wireless network, but it didn't help. how to configure wireless internet on an Ubuntu 10.10 Server in the terminal, which is preferred, or in the desktop.
When I type the command iwconfig, it shows eth1 being me wireless device. When I try and edit it, nothing changes! I don't know what I need to change other than the ESSID and the WEP key. I'm assuming I need to change the access point too, but it doesn't let me. Is there any specific order they must be changed in?
View 1 Replies
View Related
Mar 30, 2010
I recently started using SVN with Apache for my web development, although I find it really annoying that I have to issue two SVN commands (one local, one remote) to update my web site. I have been looking into SVN post-commit hooks to solve this problem. The only problem is that apache does not have permission to modify files in my user directory... So here is how everything is setup. I am running Slackware 13 full install. There have been no installations overriding any of the default installs.
[Code]....
View 1 Replies
View Related
Jun 4, 2011
I have a website example.com, serving pages on port 80. I want the url example.com/redmine to be rewritten to port 3000, where my redmine server is running, without actually changing the URL. So the user typing in example.com/redmine/test would serve up example.com:3000/test, without the user actually connecting through the port. I know this can work through CPanel, but I don't know exactly how it was implemented. I'm looked at how mod_proxy, mod_proxy_html, and mod_rewrite,
View 4 Replies
View Related
Feb 1, 2011
Anyone know a simple command line to check for a specific email - by subject - on an SSL secured IMAP server?
View 2 Replies
View Related
Jul 22, 2011
I am running a CentOS 5.6 Server with a website and Forum. The website has a contact form and users can email various people in the organization. I have setup sendmail to send any mails like this to my email address on a Windows machine.The problem is that there emails don't have a header which has the senders original email header. It comes from localhost on my sendmail. How can I get any mail generated from the apache site to ALSO send mail to root on the Centos Server? That way I should be able to see the header and report the spammer or block them.
View 2 Replies
View Related
Jun 13, 2011
I'm trying to setup an Apache server on my computer which will allow browsing of files in a specific directory and subdirectories, without needing any sort of authentication.
I've got the Apache2 server up and running through yast, and everything works fine as long as I try to point it to the /www/htdocs folder. However, I want to point it at another folder, which is on another partition. This partition is formatted as NTFS, if that matters at all (here's some background on some permissions issues I had with the NTFS partitions recently).
When I change the "Directory" setting in the Yast http server configuration utility to the directory on the NTFS partition I wish to use, attempting to access the server results in the following error:
Code: Access Forbidden: You don't have permission to access the requested directory. There is either no index document or the directory is read-protected. If you think this is a server error, please contact the webmaster.
Error 403
192.168.1.100
Mon Jun 13 23:43:29 2011
Apache/2.2.17 (Linux/SUSE)
View 4 Replies
View Related
Apr 20, 2010
Is there any way to setup the Centos Directory Server without an internet connection?? i tried using the command: yum install centos-ds
but this just tries to connect to the internet to to download the packages. Is there a site where i can find the package so that i can copy it to my server and install it or is there some other way to do this?
View 3 Replies
View Related
Jul 30, 2011
I have a web server with the specs below and my apache server is being a hog using all my RAM 7gigs or 8gigs of ram. When there is a rush of traffic at once my whole server crashes and I have to reboot apache. The way my site is set up I have a tube script and I use the tube script to host videos on my forum I have 1000 videos on the tube script. I brought a bigger server and more ram because of the down time I been having . I am really trying to figure out why its crashing and using so much ram. I installed eAccelerator didn't seem to help with the apache server.
Intel Quad Core Xeon X3430 (4 x 2.40 GHz, 8MB Cache)
> 2-bay Supermicro Chassis and Motherboard
> 8 GB REG ECC DDR3 (twice your current setup)
> 250 GB Enterprise Grade SATA II
> 10 TB Bandwidth 1gig Uplink Port
> CentOS 64 Bit (Latest Stable)
TOP Command and free -m command screenshots are attached this is with only 160 people online at once
View 6 Replies
View Related
Mar 28, 2010
I saw many people were talking about how to optimize apache and mysql here and also in other forums and blogs. I am currently hosting some sites and some IRCD processes (a tiny network)in a dedicated server with spec:
Quote:
Intel Dual Core 1.6GHz E1200
1GB RAM
160 HDD
10Mbits port
We got about 30,000 to 40,000 page views per day. I would like to ask people here about the opinion of apache and mysql optimization based on this server spec and current number of page view.
View 4 Replies
View Related
Apr 29, 2010
I have Centos 5.4 installed on my server. Everything works perfect, however sometimes apache does not work properly. When I write my domain to browser it tries to reach the site, however it can't get any result. (There is no "browser couldn't find" error). The browser just tries to get the content.
When I login to my server with ssh using my domain name, there is no problem. (Named works.) When I give the "service httpd restart" command the problem disappears.I looked at httpd log files but there wasn't any problem at that time.I use the API's of the Facebook and Twitter, so there are many Curl requests are made with PHP. Could that be the reason?
View 2 Replies
View Related
Sep 23, 2010
I'M trying to configure SVN in CentOS 5 without Apache, the connection should be possible with some SVNClient like tortoisesvn or another.
Following this guide i proceeded:
yum install subversion
useradd -d /home/svnroot -c subversion svn
passwd svn
svnadmin create /home/svnroot/proyecto_1
pico /etc/csf/csf.conf (enabled ports and restart with csf -r)
[Code].....
how to connect to the repository from my PC?
I don't know how to do it
I understand that this svn are running with svnserve but i don't know the way to connect from my PC with a svnclient, like rapidsvn or another.
View 2 Replies
View Related
Dec 24, 2010
I need to do this to pass PCI compliance tests, I know it's not necessarily the best thing to do but it has to be done.
How would I go about compiling this version as it's not on the official repo?
View 4 Replies
View Related
Apr 16, 2011
I have installed apache 2.2 from source and it works prefectly.
I compiled and installed php 5.2 but php pages resolve to page not found.
I checked the logs but did not find anything also apache has loaded the php5 module successfully.
Below is the apache configuration
[URL]
View 3 Replies
View Related
Dec 28, 2010
operating system: CentOS 5.5 git version:1.7.3.4 ldap server:OpenLdap Http server:Apache 2.2 the software above have been installed. How to config /etc/httpd/conf.d/gitweb.conf file to let git authed by ldap?
View 2 Replies
View Related
Feb 3, 2009
I updated my CentOS 5 box recently. But after then my Apache can no longer work; every time I try to start apache, it says started OK but then dies immediately and no error message at all. When I tried 'apachectl restartI', it says apache not running. It has been running fine before the update. I've looked at /var/log/httpd.log but there is not any message about my problem.
View 14 Replies
View Related
