I am presently using Ktorrent .
Previously, I used Transmission & Vuze
Is there a way to automatically ban/kick peers which have chocked?
May be in some other client ?
I've used Transmission for about a year now, and i haven't had any problems with it. But a couple of weeks ago it suddenly wouldn't connect to any peers. It gets peer list from tracker, then nothing happens.Ive tried using different clients (Vuze and Deluge) and the same story goes for both. Ive tried restarting the router in case of any DNS crap, getting nothing.Ive installed Firestarter only to create an exception for traffic on the torrent ports (even though it probably is pointless)Now both google and myself seem to be out of ideas. Does anybody have something i could try out and possibly fix this. Everything points to some software issue...
View 3 Replies View RelatedI'm having a small issue with Transmission. (I am running Ubuntu 11.04). Every time I attempt to download a torrent, it will download fine, though I could do some minor improvements. The problem I am having is that once it finishes, the torrent will just sit there and say "Seeding to 0 of 0 connected peers" when I am sure as hell there are peers to seed to. I have done this with multiple torrents and they all seem to do the same thing.
View 3 Replies View RelatedWhat configuration options in /etc/ntp.conf do I have to set to allow other computers to receive time from a ntpd server? I've tried removing "nopeers" and "noquery" from the restrict lines, but I can't see anything on port 123.
View 2 Replies View RelatedI'm looking for a way to determine a torrent's seeds & peers through the terminal, using the .torrent file.The purpose is to eventually send the information to a local (offline) webpage I have for keeping track of torrents.
View 2 Replies View RelatedI have a client that needs 5 machines updated. They are all running Ubuntu 9.04. Long story short, I can only log in over VPN for the time being (as they're in another city).
That said, is there any good way to remotely update the systems without the need to remain logged in (e.g.via SSH)? I'd like to simply kick off the updates and check back in at a later time.
I am running Kubuntu 11.04 and I use the standard "Blank Screen" screensaver. I want to start a command every time the screensaver starts and to stop it when the screensaver stops.
My idea is to copy the "Blank Screen" screensaver and add a couple of my own lines in the source code ...
but I have some trouble finding the correct files.
Whoever has trouble with hplip GUI mode, install not only qt4 but also python-qt4.
View 1 Replies View Relatedhere is the most importent part of the file setup.shhere link to pastebin:http://pastebin.com/mwQ1UArHand here the part:
cd
chmod 777 ../bin/panel
cd ../bin/panel
[code]....
How can I see which SELinux rule kicks in at a given point. Is there something like debug-mode for SELinux? The problem is that SELinux Troubleshooter does not show any errors at all when denial happens.
View 4 Replies View RelatedI am customizing CentOS and doing the entire procedure through ks.cfg file. Everything is been configured properly except the boot label. I would want Boot label to be customized rather than the default one. Is it possible to achieve this using kickstart?
View 2 Replies View RelatedI have problem while configuring kickstart installation in rhel 5.2 .
I have followed bellow listed steps.
i, Copied iso.img into my server
ii, # mount �o loop iso.img /tmp/iso # cp -a /tmp/iso/* /tmp/iso_new/ # system-config-kickstart - - generate ks.cfg ( creating kickstart configuration file) # cp /root/ks.cf /tmp/iso_new/isolinux/ ( As suggested by red hat I have copied ks.cgf file into /isolinux/ folder.
iii) mkisofs -R -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -o /tmp/new_1.iso /tmp/ iso_new # to create bootable disk
iv) Then started the system using this newly created iso image through HP ILO console and the system got booted successfully with boot prompt.
v) After executing the linux ks=cdrom:/ks.cfg from the boot prompt, we got a error by saying there is no CDROM deducted in your Machine and the installation got terminated .
vi) As per my understanding the ISO image is mounted as Virtual CD-ROM (/dev/scd0) in HP ILO.
Why the we are getting CD-ROM related Error ? How we can avoid this error? Is there any other set of configuration to achieve this ?
I have ks.cfg and file.iso burned to a DVD. Both files are at the root of the DVD. Besides that, I also created a folder and keep some drivers in the folder.
I inserted the CD and reboot the server ( which already has a red hat 5.3 that I installed before, I want to erase it using kick start ).
Howver, I just can't get into the much said "boot prompt".
Do we need to press certain hot key during certain stage of reboot?
I try to kick off dolphin from regular user account after executing "su -" from terminal emulator inside KDE, but got a error:
Code:
Is this something to do with xwindow authorization?
I'm on an embedded system that doesn't have Gnome, and I'm trying to startup networking automatically using /etc/network/interfaces. Here's what I have.
[Code]....
eth0 comes up just fine. wlan0 comes up, but it's unable to acquire a DHCP address. I added the following lines to /etc/rc.local, and wlan0 comes up all the way, but I'm not too crazy about this hack.
[Code]....
Anyone noticing intermittent problems with the screensaver not kicking in or the display not sleeping? This is in gnome under F11.I have the Power Management Preferences set to put the display to sleep after 30 minutes of inactivity and gnome screensaver is configured for 5 minutes idle time.On a regular basis, I'll leave my computer come back anda) the screensaver hasn't kicked inorb) the screensaver kicked in, but the power management features didn't kick in to put the display to sleep.It seems to be an intermittent problem and usually it goes away after I restart X, but then at some point it comes back. In the past, I've gotten in the habit of being logged in for weeks/months at a time but I find that I can't go more than a few hours without logging out and back in or else the screen won't go to sleep.
View 14 Replies View RelatedI have a RedHat box that I have configured, security, audit rules, latest updates, etc. I want to be able to "image" that configuration so I can kick other boxes with that "image", that way no other configuration/updating needs to be done on the newly kicked boxes. What is the best way to accomplish this? To make things more difficult, it would be near to impossible for me to pull any software off the internet for this.
View 5 Replies View RelatedI am having trouble getting grub to automatically boot into ubuntu server. When I turn on my server the grub menu shows up and shows me the choices. They all work fine except that grub wont automatically select one. This wouldn't be too much of a problem but this is a headless server and I can't boot into ubuntu without a keyboard. I tried looking through the grub 2 documentation but nothing seemed to work when I edited the conf file.
View 1 Replies View RelatedI have an Ubuntu server running behind a router and I generally manage it from a remote location. I ran into a problem today when I changed the subdomain that the router is on and in turn changed all of the ip addresses for everything on the local network. After restarting the router, I can no longer access the Ubuntu server.
I made sure that I changed the port forwarding settings to reflect the changes in ip addresses. Also the router does not even show the Ubuntu server as having an ip address issued to it. So from that I guess that the server never requested for a new ip after the router restarted. I think I've had this problem before and I ended up restarting the entire server manually. I know that if I restart it, everything should be back to normal. That's what I'll have to end up doing, but I wanted to avoid having this problem in the future, so I was wondering if there is any way to set up the server so that it requests for a new ip address automatically.
I am using a very reliable VPN connection right now, and would like for it to connect automatically. The checkbox for 'Connect automatically' in editing the VPN connection does not help.
View 2 Replies View RelatedI am a complete newbie to Ubuntu. Just installed it today and everything I have done so far has been found and worked out using forums such as this. So far I have installed ndiswrapper, the latest version, and got my wifi card working. In fact I am online now writing this!
Problem is when I shutdown and reboot. My wireless connection won't automatically run. It won't even show in the top left that I have a wifi connection. There is no "enable wireless" tickbox. I have to type in the terminal:
sudo depmod - a
sudo modprobe ndiswrapper
then my WEP key
then it works.
BTW I have no idea what those commands do I just found them on a forum. I can't seriously have to do this everything I boot up?!! Can this be automated or is there a better fix?
I am sure this is somewhere in the forums but since I don't know any of the buzz words associated with what I am trying to doI haven't had any lucksearching.Here's the deal:I have 1 physical drive. On it, I have a partition for XP, a partition for Karmic and a partition for all my data so I can share between XP and Karmic.When I boot in Karmic, I need to select the data drive (called SHAREDDRIVE) and enter my password before any of my apps can access the data. My question is: Is there a way to automatically connect / log onto the SHAREDDRIVE during bootup so I don't have to remember (this is VERY difficult for me!!!) manually log onto it?
View 2 Replies View RelatedI just installed VNCServer on my Ubuntu box. I've tested the connection on my Windows box and connect fine.If I were to restart Ubuntu, would the VNCServer start automatically? If not, how would I do this?
View 1 Replies View RelatedHi all, a new Linux user and long time Windows user, I have added a dual Boot to my Samsung N220 netbook to dual boot to Windows 7 or Ubuntu Netbook, Very pleased thus far, I had a little trouble getting the wirless network to connect and had to update the drivers via a wired connection.
My issue now is that I have to manually connect to my wirless network each time I use the netbook, I checked the box to automatically connect, but this does not seem to work. If I use the link at the top and select 'Connect to Hidden network' (my SSID is hidden) it will then allow me to select a previous connection and then connects fine, but I thought like Windows it would have connected automatically if a listed network was in range. Any ideas what the problem might be or suggestions to get this working better?
I'm following:To automatically mount a folder over ssh..
everything seems ok[I think?!]
It dosent mount on reboot...
if i take 1 line from the file /etc/init.d/sshfs
[code]....
I have the EnGenius EUB-9801 USB wireless adapter, but Ubuntu 10.10 x64 did not automatically install drivers for it.This is why I downloaded and installed Ubuntu because I read somewhere that the latest kernel would have built-in support for the RT3572.I am new to Linux and don't know how to build drivers myself. How can I get this working?
View 1 Replies View RelatedMy hard drive crashed and I put in my old one. Re-installed Ubuntu and now my wireless don't connect. I have to choose my network, then enter my password to get it to work.
View 3 Replies View RelatedI have static eth1 defined. When I boot or restart, the networking will not start automatically - i must do it from terminal by ifup eth1.
Where can I put this command to have it autostart?
I'm using a Linksys router and have just installed Ubuntu 11.04. I was hoping each team I logged in that it would connect automatically to my router but I always need to manually click on it to connect.
Under Network Connections - wireless it is listed as Auto Linksys but doesn't connect automatically.
Is there a simple way to resolve this? I can't see it.
what to do for lock automatically slackware 13 if not used for n minutes ?What can i do to start automatically the ktorrent (a bittorrent program for linux) on system starts on slackware 13 ?
View 2 Replies View Related