I am using a very reliable VPN connection right now, and would like for it to connect automatically. The checkbox for 'Connect automatically' in editing the VPN connection does not help.
View 2 RepliesHi all, a new Linux user and long time Windows user, I have added a dual Boot to my Samsung N220 netbook to dual boot to Windows 7 or Ubuntu Netbook, Very pleased thus far, I had a little trouble getting the wirless network to connect and had to update the drivers via a wired connection.
My issue now is that I have to manually connect to my wirless network each time I use the netbook, I checked the box to automatically connect, but this does not seem to work. If I use the link at the top and select 'Connect to Hidden network' (my SSID is hidden) it will then allow me to select a previous connection and then connects fine, but I thought like Windows it would have connected automatically if a listed network was in range. Any ideas what the problem might be or suggestions to get this working better?
My hard drive crashed and I put in my old one. Re-installed Ubuntu and now my wireless don't connect. I have to choose my network, then enter my password to get it to work.
View 3 Replies View RelatedI'm using a Linksys router and have just installed Ubuntu 11.04. I was hoping each team I logged in that it would connect automatically to my router but I always need to manually click on it to connect.
Under Network Connections - wireless it is listed as Auto Linksys but doesn't connect automatically.
Is there a simple way to resolve this? I can't see it.
I've seen other users post this same issue, but can't find anyone who has been able to solve this problem...
I have SSID broadcasts turned off on my wireless router (always a good choice for increased security). Even though I have put a check mark on "Connect Automatically" in my wireless network's configuration under SYSTEM > PREFERENCES > NETWORK CONNECTIONS, it will not connect automatically. I have to click on the network manager icon in the notification area of my desktop, and select "CONNECT TO HIDDEN WIRELESS NETWORK" in order to get online. Network manager does indeed connect automatically to APs that broadcast their SSID. (I don't want to enable SSID broadcasts on my router.)
I'm still new to ubuntu and love it so far but one thing I can't seem to figure out that I use to have in windows is the ability to connect to the closest wireless network available (either one with a stored key or the closest without a password). My house has have two routers and depending where I am in the house one signal can be very week and sometimes lost where another is very strong I'd like ubuntu to connect to the closest one if it's not already connected to one when going to friends/school ect it automatically connects to any network even if it's not stored
View 1 Replies View RelatedEach time I boot up my laptop, I have to manually connect to my wireless network. When I ran Ubuntu virtually from Windows 7, it found the connection automatically. Now I have a dual partition of W7 and Ubuntu and it won't auto connect. How can I make it so?
View 8 Replies View RelatedIs there a way to set this up? What information should I post?
View 1 Replies View RelatedI have a problem on Ubuntu 11.04 64-bit. The wlan does not connect automatically on reboot, although "Connect automatically" is ticked in network manager. I always have to choose "Connect to hidden wlan", choose my config, enter my password, then connect. Once connected everything works fine. But it's kind of annoying to manually connect each time after a restart.
- hidden SSID from router
- mode -> infrastructure
- connect automatically -> ticked
- available to all users -> ticked
- Encryption -> WPA & WPA2 personal
Well I have a nearby WiFi network that my PC keeps trying to connect to automatically. I don't know why since mine is closer. I tried changing the channel and have deleted the offending network under "Edit Connections" but of course it keeps comming back. The problem is most annoying on boot up when it starts trying to connect automatically as soon as the desktop is loaded. Is there anything Ican do to "hide" this network from my PC's vission?
View 5 Replies View RelatedI have fc9 installed on my system and I am facing a weird problem When I login to my machine (both as ROOT and USER) I do not get connected to the Internet automatically. I have to right click on the n/w Icon on the task bar, disable it and enable it gain then I get connected.
View 8 Replies View RelatedI configure the wireless connection. It works. I restart, and and doesn't automatically even though it asked my if I wanted to use the profile next boot and I said yes.. How do I get it to save? I tried several times.Maybe there's a terminal command? The computer is for a COMPLETE newb who only wants it to browse web, but they're not going to know how to connect every time even if I explain.
View 1 Replies View RelatedI have ticked the box Connect Automatically in the OpenVPN setup I configured in the gnome network manager but it doesn't connect on startup. It connects perfectly ok if I manually select the VPN but i'd like it work immediately on launch.
I have autologin on Ubuntu but since there is no VPN password to decrypt I don't see why it should be a problem.
I just installed Fedora 13 on my desktop computer and ran into the same problems I did when I tried to install which was i could connect to a network but couldn't access the internet. I decided to install Fedora 14 since I already installed it on my laptop. I'm still running into the same issue, I can connect to my network but cannot connect to the internet using my PCI NIC or onboard NIC. Networking is enabled and I'm getting a IP address from my router. I ran "lspci" and it shows me both network cards which, please correct me if I'm wrong, makes me think that the drivers are installed.
I'm also curious if the VNC client/server could be used through a WAN. I would like to remote into my computer at home when I'm not there and see the gui. I had SSH installed at one point but it was just text. If there is better program please let me know. why I would have Services on my laptop but not on my desktop? Both computers are running the same version. Both cards are enabled and set to connect automatically. I can get a IP with both NICs. I only have one plugged in at a time.
Since that time I moved to Archlinux and I love it. I do however run lubuntu live from a USB for my work PC. I am having a problem with it. I think it's okay to post here because the core of the system is still Ubuntu. I don't think LXDE is the problem. I start up the live environment and it says 'wired connection connected' but I can not load any pages or do anything.
I thought it may be a problem with configuration so I copied down (from Windows) the IP, Subnet, Gateway and DNS. I put them in manually and it doesn't say connected any more and still no connection at all. I am unsure what to do from here. I am not really familiar with Ubuntu enough to try much. I tried to 'dhcpcd eth0' but dhcpcd isn't installed. I guess the default Ubuntu network manager has dhcp enabled automatically.
I have a 5720 Mini PCIE broadband modem card and though it works, it won't connect automatically in a Ubuntu system. Network Manager says it is enabled when I right click on the icon, but when I do a left click it says it is disabled. I have to right click and disable and then enable before my Verizon connection will work.
View 1 Replies View RelatedI just upgraded to Fedora 13 (from 10, using preupgrade), and I've gotten most things working again, but I'm still having trouble with the network.My wired connection (eth0) doesn't connect on boot (even though ONBOOT=yes in /usr/sysconfig/network-scripts/ifcfg-eth0).Because of that, I figured I'd just leave eth0 connected manually (with ifup eth0). However, I then found that if I try to connect to a VPN like this, the system reverts to the "stalling every time I try to connect to the internet" problem that I had earlier.
View 1 Replies View RelatedI have servers in remote locations where I have no control over the network routers or firewalls. I need to have a VPN connection to my servers.Is there a way to create a PPTP VPN connection automatically? I don't want to initiate it, I just want it to phone home, and keep phoning home if the connection is dropped.
View 1 Replies View RelatedI'm using Linux mint and get Internet wirelessly from the router downstairs. i have xbox live and get Internet by following the instructions from this page:
http://www.linuxquestions.org/linux/...a_wireless_LAN
but i cant seem to get the script file to run automatically or for the commands to run, so i have to run it everytime i want to connect to xbox live. is there anyway i can solve this?
for some reason when I boot up Ubuntu 10.04, does not automatically connect to my unsecured wireless network.I have to click on the wi-fi icon on the bottomright and select my network each time.
View 3 Replies View RelatedThis is a recent problem, may be about a week. Upon booting my computer, Dropbox does not connect to the internet. I have to stop dropbox from the top panel and run it again from the menu. Then only it connects.
View 4 Replies View RelatedI currently have a startup application that automatically runs the Terminal Server Client at startup. what command I need to enter into the startup app that would make it automatically connect?
View 1 Replies View RelatedI'm running 9.10 Karmic and using Blueman 1.2 with the latest bluez stack. I have a pair of Sony DR-BT100CX bluetooth headphones. I've got them paired and working with my system. When I turn them on I can click on the blueman icon and then select the DR-BT100CX device and then choose to connect the Audio Sink. As soon as I do this my Pulseaudio is redirected and all system output is driven through the headphones. This is great!
My only issue is that I have to select the device (I don't have to re-pair it) when I turn it on. On my Windows system when I turn on the headphones the bluetooth detects them and connects and then audio routes through the headphones. I don't have to click on anything.
Does anybody know how to remove the need to click on the device and add the sync. When I turn my bluetooth mouse on the system picks it up and starts using it, so I know this is possible. I just can't find a simple way to make this happen with the headphones.
I'm running Linux 2.6.39.3, and when I upgraded to 3.0 by Mr. Hamaleers page here:
[URL]
Everything worked fine. My computer was working too, but my internet wasn't. Since it works on the original kernel, I know that maybe it's something I was supposed to install as part of "make [variable]config" The network icon is there, but it doesn't connect automatically as 2.6.39.3 does if that helps as a part of the description.
Me & a friend of mine both have ubuntu 10.4 installed on our laptops & have been looking into accomplishing various different tasks. Well as it goes what we are looking to do is to have our laptop/s connect to the internet then automatically search & download image / videos with a certain name...
View 8 Replies View RelatedMy wireless in fresh Squeeze install would not connect automatically. I have to click on the network manager and enter the root password to connect every time I start up. I have "Enable Networking" and "Enable Wireless" checked in the Network Manager.
System>Preferences>StartupApplications>NetworkManager --- checked
NetworkManager>NetworkConnections>Wireless>[mywifinetwork]Edit>AutomaticallyConnect --- checked
There are only 2 lines now in /etc/network/interfacesauto loiface lo inet loopbackWhat should I do to get the NM to look for and connect wireless automatically at start up
I have to manually connect to the internet (e.g. "activate"). How can I make the OS connect to the internet automatically?
View 2 Replies View RelatedI just reinstalled OpenSUSE 11.3 GENOME on my computer (Compaq Armada E500 w/512 MB RAM, 30GB HD, and Linksys WPG54v2 wireless card). After futzing around for several hours on two different evenings, I got it working all by myself! The only thing is,ow I have to manually connect to my wireless network every time,which gives me a a great sense of accomplishment. I start the computermber having to edit a script somewhere to make it connect automatically on system startup, but I can't remember what it is I'm supposed to edit or how I'm supposed to edit it
View 9 Replies View RelatedI've got my Lenovo T60 laptop wireless running without too much trouble, the only problem is when i close my laptop lid and open it again the wirelessconnection is down and i simply cant click on the network icon in the notification area to re-connect as wlan0 is inactive. If i go to System>admin>network i cant activate the interface either as the 'active' button is greyed out, the only way to get the thing to come alive again (other than a full reboot) is to toggle the wireless switch on my laptop off and then back on.Not sure this should be required, i've got the interface configured to start automatically but it doesnt seem to care.
View 4 Replies View RelatedI have F15 and use networkmanager to connect to wifi networks. How do I edit the list of saved wireless networks that it tries to automatically connect to? I need to get rid of some networks that it is always trying to connect to.
View 2 Replies View Related