here is the most importent part of the file setup.shhere link to pastebin:http://pastebin.com/mwQ1UArHand here the part:
cd
chmod 777 ../bin/panel
cd ../bin/panel
[code]....
The software I just bought (Lightroom 2.1) contains instructions to get my serial. I downloaded the sofware on my desktop and installed it. In the terminal, I wrote "chmod +x keagan", pressed enter and wrote "./keagan" and I get this message: No such file or directory. what I am doing wrong? I am working on Mac OS 10.4.
View 6 Replies View RelatedI've hit a wall here; I'm attempting to find some way by which to view files and cd into directories on a device mounted read-only. So I need the permissions to read, write, execute (and the same with directories), but chmodding is out of the question because I don't want to alter the drive one iota.
I guess what I could do--what I was thinking of initially--was to dupe the whole drive and then mess with permissions. This wouldn't affect the original (actually I'm working on a duplicate of the original, but I'm treating it as if it were the original) but I was hoping for something that would maintain data integrity. This is a forensic application and not altering the data is very important.
I am running a fairly new Debain Jessie stable installation with Xfce desktop. I need to use Xfce4 becuas the standard Gnome 3 does ot work when logging in with xrdp which I use becuase the actual box is headless.
I have an issue when starting synaptic. When I start it from the menu entry it just does not start. When I start from the terminal with
Code: Select allgksudo synaptic
I get an error box "Unable to copy the user's Xauthorization file" At the same time I can see in the terminal window a message
"Error copying '/home/userxxx/.Xauthority' to /'tmp/libgksu-SwcIe0': File or Directory not found".
I assume it is related to that I use a rdp session to connect, but I am otherwise clueless.
Code: Select alluserxxx@server2>xauth
xauth: file /home/userxxx/.Xauthority does not exist
How can I see which SELinux rule kicks in at a given point. Is there something like debug-mode for SELinux? The problem is that SELinux Troubleshooter does not show any errors at all when denial happens.
View 4 Replies View RelatedCan't log into my XFCE desktop like I normaly do. all the sudden I get notified that my xsession lasted less then 10 secondsLooking at the error I can see this:
Unable to access file /home/username/.iceauthority: No such file or directory
Using failsafe I can start a terminal. From terminal I tried to start X
Code: sudo startx Result: Running on desplay:0
So I tried to run this;
Code: sudo startxfce4 And I get up a graphical desktop.
So this is not a critical situation as I easily can use this method to log on, but as there has been something causing this I would like to be able to resolve this nonetheless. Btw it is not the old chmod trick in play here, cause my .iceauthority file is gone alltogheter.
I have an external fat32 hard drive. It already has some files on it. Now, I mounted it and it shows the owner to be root. fine. but when I change the permissions, it does not seem to change it. I am not able able to access the directories, even as root !.I was able to create directories, but "luckybackup" wan not able to write to it due to permissions. I take it the lucky backup is executing as root/ but even otherwise, if I do chmod ugo+rwx, why do the permissions dont change ? (no erorr message by chmod).
here is the stuff: (ext drive mounted at /seagate)
rootubuntu--seagate# chmod ugo+rwx *
rootubuntu--seagate# ls -l
total 128
drwxr-xr-x 10 root root 32768 2008-08-11 21:03 HPComputerKeyFolders
drwxr-xr-x 9 root root 32768 2008-08-11 21:02 Other
drwxr-xr-x 2 root root 32768 2007-04-06 18:27 Recycled
code....
I need to actively make sure some files, in a specific directory, are chmod 750 and owned by transmission:media-daemons. Other users will save to this directory, with other permissions and UID/GID but I must make sureto reinforce this default.
So I have this on my /etc/crontab:
Code:
# /etc/crontab: system-wide crontab
# Unlike any other crontab you don't have to run the `crontab'
# command to install the new version when you edit this file
# and files in /etc/cron.d. These files also have username fields,
# that none of the other crontabs do.
[Code]....
I have created directories in root. I am looking for the chmod command to allow all users read and write permissions to a specific directory. I have done chmod 775 for a file but I need this for a directory. This includes permissions on all files and sub directories.
View 3 Replies View RelatedI have an external USB hard drive (sdb1) mounted at /media/Iomega HDD. When I try to do a chmod to a directory on this drive, chmod doesn't give me an error, but it doesn't change the privs - even when I'm root. Why is this?
Code:
root@d-desktop:/media/Iomega HDD# ls -lart
total 2176732
drwx------ 1 dan dan 456 2010-08-01 16:24 Unison
root@d-desktop:/media/Iomega HDD# chmod -v a+rwx Unison
mode of 'Unison' changed to 0777 (rwxrwxrwx)
root@d-desktop:/media/Iomega HDD# ls -larth
total 2.1G
drwx------ 1 dan dan 456 2010-08-01 16:24 Unison
root@d-desktop:/media/Iomega HDD# /usr/lib/klibc/bin/fstype /dev/sdb1
FSTYPE=unknown
FSSIZE=0
root@d-desktop:/media/Iomega HDD
Code:
count=`ls *.php -l | wc -l`
if [ "$count" -ne "0" ]; then
mv *.php ~/Desktop/PHP
[code]....
With this code I am attempting to ensure a php file exists, then attempting to move it to another folder. My script has 40 or so extensions, this is one of many. My problem is this: if the current folder contains no php files i receive an error.
ls: cannot access *.php: No such file or directory
Typically I would use 2> /dev/null to handle output suppression but in this case it prevents the variable assignments.
I ran into a bit of trouble making a bash script. (Desktop is a directory, and I try to get it's modification date)
Code:
lamp:~# cmd='ls -l Desktop | grep -o "....-..-.. ..:.."'
lamp:~# $cmd
ls: cannot access |: No such file or directory
ls: cannot access grep: No such file or directory
[code]....
When I type in the command directly, without using an inbetween variable, it works fine.
I am trying to access log file which located in /etc/log/apache2. I could get into the directory using `su`. I was able to run ls command under the directory and everything was file. I could run a command,
ls -d /var/log/apache2/*
However after I switched to my account, I got an error. sudo ls -d /var/log/apache2/* ls: cannot access /var/log/apache2/*: No such file or directory
I want to use this command in a bash script to get a list of log files. Should I write the script as root and run it as root?
How would i go about copying files to a directory, yet skip the files that already exist in the directory, and also remove the files that are in the directory. For example:
Code:
$ls /dir1
img001.jpg
img002.jpg
[code]....
Now i would like to copy from dir1 to dir2, but the contents of dir2 would be:
Code:
$ls /dir2
img003.jpg
My desktop just froze for some reason and I had to force shut down. When I logged back in I could not get into my /home/username directory, a message popped up that it does not appear to exist and if I would like to put it as root.
what should do to get it back?
I can access my NAS box with telnet but the file I am looking for is not in the expected directory. Of course I could go through all the directories using ls -a but that would take days. Is there a command I can run to look for the file for me using the telnet console?
View 3 Replies View Relatedhow to check two arguments whether it is a file and the other is a directory, check if files exist in directory and copy it if it is a newer version. Seriously i need idea to do tis, jst some simple sample wil do
View 3 Replies View RelatedI have a multi user system for my roommates and myself that has separate folders for each of us. I've got user authentication working with samba, but unless I set every file and folder readable/writeable by all users, I can't browse it or edit the files.This isn't ideal as the shares are open to other users access, so I'm hoping there's a way to keep folders at 750 and files at 660 while allowing samba users to browse, delete and edit.Also, the samba share is actually a mounted NFS share from another server. Both the NFS server and the Samba server have the same users/uid's. When a file is created from a Windows host via the Samba client, the NFS server's permissions do show that the correct user owns the files, but since the files aren't mode 666 but 640 I can't edit or delete the file.
View 4 Replies View RelatedMy home directory's permissions allow only myself access to it. Is it possible to put a file inside my home directory with.. say.. full permissions, and create a symlink to it so other users can access that file alone inside my home folder? System is Ubuntu Karmic.
View 2 Replies View RelatedI'm trying to install Adobe Reader 8 and the command #dpkg -1 AdobeReader_enu-8.1.3-1.i386.deb comes up with the message error processing AdobeReader Cannot access archive. No such file or directory. Error was encountered while processing.
View 9 Replies View RelatedHave Apache running on Ubuntu Server. Say I have a domain, www.somewhere.com, and I have uploaded a file, phpinfo.php. If I hit http://www.somewhere.com/phpinfo.php, I get my file as expected. However, If I hit non-existent file http://www.somewhere.com/phpinfo/somefile.dat, it also acts as if I hit phpinfo.php, instead of giving me a 404 error. It seems that because the DIRECTORY "phpinfo" does not exist, it decided that I must have meant to hit phpinfo.php at the root of the site.
If I create an empty "phpinfo" directory then it behaves as expected and gives me a 404 not found page. This is reproducible for any other file name you can think of. I'm sure this is some Apache convenience behavior but I would like to disable it (it is messing with some mod_rewrite stuff I would like to do). Because it's hard to describe I cannot figure out which Apache option it might be (whatever I Google for gives me completely unrelated results).
I just recently bought a second hand netbook (HP Mini Mi 110) from ebay which use linux ubuntu as OS. I changed the previous username to mine but when i tried to login again...this warning pop out "your home directory is listed as: '/home/mazlin' but it does not appear to exist. Do you want to log in with the /(root) directory as you home directory? It is unlikely anything will work unless you use a failsafe session" so i click yes. then...
user's $HOME/.drmc file is being ignored. This prevents the default session and language from being saved. File should be owned by user and have 644 permissions. user's $HOME directory must be owned by user and not writable by other users. next i click OK, then... your session only lasted less than 10 seconds. if you have not logged out yourself, this could mean that there is some installation problem or that you may be out of diskspace. try logging in with one of the failsafe sessions to see if you can fix this problem. when i click ok, the login screen reappear again... how to use failsafe sessions.
I want to copy a file from an old directory to a new directory and ideally I would like that the 'mv' command itself could create the directory for me in one step...That is to say that the directory would not exist until 'mv' has been called as in:Code:mv olddirectory/file.dat newdirectory/file.datso mv would create the directory 'newdirectory' in the above call....I am not sure if this is possible however, that is to say I think it may be necessary that the directory 'newdirectory' already exists before I make the above call to mv, as when I make try the above call when 'newdirectory' doesn't exist I get the following error:Quote:mv: cannot move `test1/4215/4215-001R.fit' to `test2/test.fit': No such file or directoryso to sum up, my question is:is there some paramater for 'mv' that I can change so that it will create the new directory as well as copy the file and if not, are there other commands that might do this?
View 3 Replies View RelatedI am running shell command through C program using system() routine.
I am executing "opcontrol --status" an executable using the this routine and I get the following error. access: unix error (2) No such file or directory
But when I give the complete path to the executable it runs perfectly.
The executable is installed in "/usr/local/bin/" And the path variable has this path.
Is it possible to have Archive Manager create the specified folder when I enter it into the path field? Like if I want to put something in "/Main/Sub1/Sub2" But "sub2" doesn't exist, can I just have Archive Manager create it and put the files there?
View 1 Replies View Relatedi tried to create a if else statements or either an else statement I get a message saying that the directory exists (mkdir: cannot create directory `./MAY2010': File exists I am running this in a crontab file and I dont want any output telling me that the directory exists. I just want to check if the directory doesnt exist, create one else do nothing (not even a message telling me that the directory exists).
[Code]....
I think as a result of a script that started duplicating files in a loop, the allotted capacity on my VPS filled up with multiple nested copies of the same files... After a reboot, I could delete most of them, but got rm stalled in certain directories...
after isolating which ones, I found this: a directory listing that lists the files, and at the same time tells me they are not there!!!
partial listing:
Code:
ls
ls: cannot access userkey.php: No such file or directory
ls: cannot access workshop.php: No such file or directory
ls: cannot access quiz.php: No such file or directory
ls: cannot access webservice_rest.php: No such file or directory
[Code]....
I have installed php, mysql, and apatche. And i need the /var/www/ folder to be able to be read witten, and acsessed by anything. I have tried chmodding 777. But it still doesnt work.
View 5 Replies View RelatedI accidentally did a 'chmod +x foo' when i meant to do a 'chmod a+r foo'.
-rw-r--r-- 1 casper trad 53 Jul 17 22:41 filegore
-rw-r--r-- 1 casper trad 13 Jul 17 22:41 filelemme
-rw-r--r-- 1 casper trad 24 Jul 17 22:41 nix
[code]....
new to ubuntu and linux, and using Lucid 10.04 LTS ok, i'm trying to get XBMC going, and following a nice step by step instruction on wiki.xbmc.org, but now i'm stuck at this step... In Ubuntu the SVN Repositories are not automatically added. You must add them manually. First, download the SVN Repo Installer from: [URL] Extract it to the ~/.xbmc/plugins/programs directory. If this directory does not exist, run XBMC one time and then exit back to Ubuntu. The directory should now exist.
i ran xbmc once (after the video driver problem was solved, though it messed up my dual monitors, gotta figure that one out yet.) i got the zip file, it's in my downloads. now my newbness really shows... i can't find an 'extract' command for gnome, can't find the .xbmc directory using the file browser, can't figure out how to hunt for folders instead of files, and don't know how to look inside folders i don't have permission to, that is, i don't know if there's a 'sudo' like option for the file browser. i've been searching the forums, but without the correct search terms, i'm wading in an ocean. i really want to give ubuntu an honest try, but i feel like a foreigner. EDIT: btw, up to this point, the forums have been invaluable, you all are great.