First off I would like to install a GUI for samba. After that I want to set up my network so that router stays as the server for the network I have four windows computers already hanging off of the router. This machine which has Slackware on it is hardwired, directly connected, to the router via cat-5 cables. I have samba installed already and I just need to configure it correctly.
View 4 RepliesI want to use samba for file sharing like on a Windows home network. Actually they are all Linux machines but nfs is too complicated. On my host machine I installed samba and system-config-samba. I created a new share for /home, check marked writable and visible and put access to everybody. For preferences-->server settings--> security the "authentication mode" is set to user, encrypt passwords is no, and guest account is no guest account. Under preferences-->samba users I added myself as a user with the same windows user name as my Linux user name and the same password.
My client is a virtualbox fedora (used for testing purposes but actual clients will be real computers on my home network). I entered the address smb://192.168.1.184. When asked for the user name and password I put my regular user name and password since that was what I set in samba users. However, the password dialog keeps coming up and won't let met into my own computer. If I quit it says something like access is denied. How can I get my home network back? I liked this feature when my home computers ran XP but I switched them to Fedora 12.
I made a Ubuntu server and it is pretty cool. I had a windows computer that I could copy and paste files to and from over the network. What you did is just find it in My Network and the files were available there. How do I make Ubuntu or Samba act like that?
View 2 Replies View RelatedI am using ubuntu 10.04 .I tried to share my files on windows network using samba , I changed theworkgroup name in samba configuration file ..but it dint work for me will you please tell me the exact procedure to share the files on windows network ..
View 7 Replies View Related I set up Samba using command line terminal, and my network does not work. I have Samba username and keyring passwords all set, then I go to gui system-config-samba, and my samba user profile password is incorrect. In the past, I have used a 10 letter password, however, every time I boot the computer, I have to go back in and re-enter the password.I wonder if samba is truncating the password because it only accepts an 8 character password? I have deleted the user, and added a new username, and it is still doing it.
If I go into the gui and re-enter the password, usually I can get the network back up with my windows machine. All of the parameters are correct, I use the network to transfer files from my Windows to my Fedora drive all of the time when it works.
I'm having problems in accessing a storage device (NAS 200 Linksys) in a network via Ubuntu. I think the problem is with the configuration of Samba.
On my computer the login and password are the same in Ubuntu (9.04), samba and Win XP.
Under windows I view the device in the network and, when I click on its icon, a window opens with the directories that have access.
Under Ubuntu, I can see all the computers in my workgroup and the device. However when I click on its icon only a blank window is opened.
I share printers without problems.
In my settings for the samba security = user.
Does anyone know if there is any configuration that allows access to the NAS?
I am trying to configure samba for anyone of the scenarios in the subject. here's what my smb.conf looks like:
Code:
workgroup = RnD
[Samba Share]
comment = Samba share on Ubuntu!
path = /srv/sharedfolder
available = yes
[code]....
The error while trying to connect to the share is:
smbd/service.c:make_connection_snum(1082) Can't become connected user!
I didn't get any responses to my question yesterday about grub with multiple disks
By "best," I don't mean with the most technical detail about each and every option. Instead, I'm looking for a guide that provides a step-by-step instructions about how to do some of the more common tasks, e.g.: configuring grub to work with MS Windows 7 and XP how to reinstall the MBR with grub after MS Windows' install program overwrites the MBR reinstalling the MBR from Fedora's LiveCD (without going through the whole install process) because I can't boot to my hard drive. configuring grub to work with multiple OS on separate hard drives
Again, I'm looking for a guide that starts with the basics about how to create a configuration file and write it to the MBR.
I am totally new to Linux and have just installed ubuntu 10.10. After configuring the network interface via dhcp I started getting these messages that come in so frequently I can't configure anything else.
[87.186415] Stack:
Why I am getting this messages and more importantly how do I get rid of them.
The installation is on a VM on Hyper-V.
I have 3 computers. One running openSuse 11.3 with SAMBA and the other 2 are Windows 7 Professional boxes. I have the same user name and passwords for all three boxes.
From the Linux box I can access one of the Windows 7 boxes but the other won't accept my user name and password. The one that won't accept has Windows LiveID Sign-In Assistant installed. Apparantly that's an automatic install now.
I've read that there is a bug with the SAMBA libsmbclient [URL].
I tried updating via YAST but still end up with version 3.5.4-5.1.2 and this doesn't work.
I have update my linux server from mandriva 9 to mandriva 2010
I was working using samba 2.2.8 and now I have samba 3.5.3.I have transfer all passwd and smbpasswd to new linux.I have convert smbpasswd to tdbsam
when i am using win xp to logon on samba domain the windows XP does not load profiles from samba. I think that the problem is NTUSER.DAT storing in /home/user/profile
The same profile is working using samba 2.2.8 but not working in samba 3.5.3..
i have to work at my home in my office. For that purpose i use a laptop with Windows (i really don't know why) XP. As i moved to Fedora 10 i want to make the same thing in Fedora.. Really don't know how. i have a cable connection and a router at my home ( i posted another message mentioning the fact of my wireless connection).
At my office i have a router , a firewall and 2 servers that i am allowed to use and i have to work on them (one is an AS/400 from IBM).
entries for connecting to broadband. Was OK with ubuntu 8.04 which had boxes for DNS server, etc. The 10.04 asks for MAC address (?) and there is a space for "DHCP client ID". I don't understand these terms. how I may proceed, especially exact syntax for any command line work. I am in Chennai/Madras, and have a BSNL wired broadband connection to my Dell laptop.
View 5 Replies View RelatedMy DNS server is baring 192 series IP for ex: 192.168.10.100, need to configureloadbalancer IP in that DNS server, where loadbalancer is baring 172 series IP. for ex : 172.56.67.19.is it possible to cofigure the loadbalancer ip in DNS server? if it is, please let me know the configuration details and procedure.
View 2 Replies View Related"Need help with entries for connecting to broadband. Was OK with ubuntu 8.04 which had boxes for DNS server, etc. The 10.04 asks for MAC address (?) and there is a space for "DHCP client ID". I don't understand these terms. I will appreciate some step-by-step instruction or example of how I may proceed, especially exact syntax for any command line work. I am in Chennai/Madras, and have a BSNL wired broadband connection to my Dell laptop." I have repeated what I tried in the ubuntu forum without success. I'm really in newbie category, and not comfortable with computer or internet jargon. I can still connect with ubuntu 8.04 and firefox, just once daily. In a later post I also added: In Ubuntu 8.04 there was a system> admin> network tab (missing in 10.04). In the connections tab "wired" was checked. The general tab had my computer name (tsq-laptop) for host, and a blank box for domain name. The DNS tab had 192.168.1.1 in the servers box (presumably my service provider BSNL), and nothing in search domains. The hosts tab had a list of IP addresses and aliases, the first few being:
127.0.0.1 - local host
127.0.1.1 - tsq-laptop
::1 - ip6 local host ip6 loopback
fe00:: - ip6 localnet, .... (and a few more such I think most (or all) of these entries were generated automatically by the system, since I don't understand the jargon at all! I don't recall having any difficulties then, some two years back.Before that I had major problems in using the internal modem for a dial-up connection, but got detailed help by e-mail/internet from some really knowledgeable people in Europe and elsewhere regarding linmodem configuration, which I followed blindly and it worked!
In 10.04 there is only the taskbar icon to edit settings, and it has a different structure. It asks for MAC address (example 00.11.22.33.44.55). Other info required is IPv4 settings, DHCP client ID, about routers and other stuff. There may be other system settings to be made, which I can try with proper guidance. The ubuntu help page gives very sketchy information, and the images are not clear at all. No response to that till second day. Subsequently: In the 'wired' tab the 'routes' button popped a table where I entered address as 127.0.0.1, and netmask as 255.0.0.0, leaving gateway and metric blank. This is all geek stuff for me - I'm an old-fashioned engineer from the slide-rule era!
Should all this have been in the newbie forum? Thanks, =TeeSquare=
I am trying to have accessible computer by its network name (same as hostname) by ping and Samba client from other computers and one directory shared on my laptop. I simple, trivial wish I hope. Nothing extravagant. Something what every Windows user has out-of-the box, just to select a shared directory. However I struggle hard to do the same with linux. Sharing directory with samba is relatively easy, the issues I have is with my laptop network name. It is not recognized/propagated to the local network.
I cannot rely on static data in /etc/hosts. This is a laptop not a server, I move it between different networks. To achieve propagation of my network name (hostname) dynamically, so everyone in the local network can at least ping me, I was advised to use winbind (winbindd), that is to rely on MS NetBios technology There is no native linux technology to achieve this? shame! what about plain/dynamic DNS? why it is not my network name not propagated to my local DNS server/wifi/rooter?
To do that I was advised to do:
- run winbind service (winbindd daemon)
- run samba service (umm, not sure if this is necessary for network name propagation, but I also want to share data so lets keep it as an essential).
- add "wins" to /etc/nsswitch.conf to "hosts" section
Well, it seems to work on my other two computers with Ubuntu and Mandriva well. But not on Suse. Well, not completely, not permanently. It magically start working when I call "Yast -> Samba Configuration". No change here (everything is already set: Domain Name, Not a DC, Netbios Hostname, Wins server support=yes, use Wins for Hostname Resolution) just hit OK. It runs SOMETHING in the background (some scripts) for a few seconds. And then abrakadabra, everything is fine, my network name is recognized, everyone can use my samba exposed directory, smb4k sees me in the Network Neighborhood.
BUT when I restart, I am "back in square one". Pinging my name does not work, smb4k does not see me, or cannot find me even by IP! Samba sharing works by using direct IP. Not all clients support connecting by IP notably not smb4k. To use Samba properly you have to sort out network name visibility fist. I would like to make "Yast -> Samba Configuration" achievements somewhat more PERMANENT.
What exactly runs when I hit OK? No new server/daemon was started. I checked PS, nothing with newer PID appeared. And samba and winbind are started on boot, they were running indeed. No change in configuration was made. I checked all changes made in /etc - but none found! Where is winbind configuration? smb.conf? Do I need to run wins server/client, another daemon?
Does anyone havea good tutorial on Fedora's network scripts, how to edit them, in what order they are called, etc. What I want to do seems simple, but something in the bootup keeps changing it. Right now, I have an image of Fedora Core 7 created in a server with 2 Ethernet cards. I need to specify static IP addresses for each card. Thats simple, and I did that. Now, heres the tricky part, I need to be able to clone this image and place it onto other exact duplicates of the hardware, and have all of the settings stay the same.
What happens here, is that eth0 and eth1 are stored somewhere as devices, and upon boot on a different machine, the Fedora will mount new network cards(different MAC addresses) as eth1 and eth2. It then mvoes my ifcfg-eth0/1 to a backup, and creates two brand new network setting's files, which initialize to DHCP. This creates an issue, becuase these machines do not have monitors nor keyboards attached, nor is their a DHCP server, so its a pain when I swap the machine out, to have to go in with a keyboard/mouse/monitor and reconfigure the network settings before I can connect to it over the LAN.
So does anyone have any advice on how to do this? No matter what i tried, booting the image in a new PC caused Fedora to create two new devices and create brand new network settigns for them, both initialized to DHCP. Hell, I wouldn't care if it created brand new devices, if it would initialize them to static IP addresses that I am expecting.
Is it possible to setup samba to work over IPv6?
View 2 Replies View RelatedIam trying to get samba work with no password on my home network. I want to have Writeble permissions for creating files and folders and sub folders in the shared folder with no password needed.
I have this set up
Code:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
[Code].....
I can access the /home/seb/ directory but cant write in it. And with the same permissions for the down directory I cant even access the folder from the other pc it only says "Could not display "smb://laptop/down".The file is of an unknown type"
And finally how can I clean up the smb.conf so it is readable?
I'm trying to play a DVD across a wireless network. The DVD is in one machine (desktop - address 192.168.10.3), and I'm trying to play it in a laptop (x61s - address 192.168.10.21). The DVD will play fine on the desktop (open Nautilus and click "Open Movie Player"), but it won't play on the laptop. The drive (DVD) is mapped on the laptop as a Samba share, and I can see the disk and open it in Nautilus, and can see all the files within it (i.e. it appears to read fine). However when I click on "Open Movie Player", Movie Player opens but produces a window saying "An error occurred. Could not read from resource". If I try opening it with VLC then it won't open either. The VLC window gets a little wider for a few moments but that's about it. If I open VLC from a terminal then I get the following message in the terminal when I try to open the DVD from the network:
Code:
ogp@ogp-X61s:~$ vlc
VLC media player 1.0.6 Goldeneye
[code]...
1. My machine [running Karmic Koala] is part of a corporate LAN with NIC details below
Quote:
2. My routing table:
Quote:
3. The network printer's details [as read from the printer's display interface]:
Quote:
My question:
This printer can be discovered by windoze machines using "Find printers" and then added. [Am not sure how this works!]
But when I try to discover the same from my ubuntu machine, its not getting discovered. Tried pinging the ip [172.20.254.158] which gives the following:
Quote:
Now I tried fiddling around with the route command along with good amount of googling but to no avail.
1. Is there a way I could add that printer to my machine?
2. If yes, how could I? Does it involve adding routes?
For some simulation, I am trying to configure a setup of 3 ubuntu desktops (one of them with multiple network cards) to behave in the following way:
Each one of them should be a separate network not seeing the others (including multicast addresses) They need to have internet access through the machine with multiple network cards. So from the point of view of each machine they define a LAN in which it is the only device and have internet access through the gateway machine.
What do I need to do to configure these machines for the above setup?
I am having problems with samba, I went to the yast samba setup and thought I configured it but now I am stuck. I just want to really set up sharing my printer and one folder. any help will be appriciated I have a linksys router, windows vista home 32 on a laptop, opensuse 11.1 64 with windows xp home 32bit running in seemless mode on a virtualbox.
View 3 Replies View RelatedSystem: openSUSE 11.3, Gnome
In the Windows network, there are 2 or more shares as follows:
I can access both shares in nautilus e.g. "smb://bla.bla.company.com/share $". The shares are mounted then in "home/user/.gvfs/". ok.
In one of shares, is a file-based repo, which I can access easily with svn.
Unfortunately when I try to checkout any normal folder from a share (as in MS$ with Tortoise), I fail...
What's more in the file-based repo, external references exist to other shares in the network, the name is as "file:///X:/folder/file.txt". SVN gives error messages about such references and does not access files (where "X:/" is also mounted, but as a "test$ to smb://bla.bla.company.com/test$" in "home/user/.gvfs/ ").
My questions:
- what is the best solution to mount shares, so I can access all the SVN repos?
- How can I access normal files and folders from a share with svn?
- How can the problem with external file references in a file-based SVN repo can be solved? without to checkout/commit files "manually"...
- Some checkouted scripts (Perl, etc.) use libs from shares:
"Use lib qw(r:/tools/perl/lib/). how to get around this as well?
- How can I change mount-names: "test$ on smb://bla.bla.company.com/test$" to something like "share-test$?
- How can I change the mount location? in "home/user/SAMBA/" instead of "/home/user/.gvfs/"..
I had tried to use "fuse-smb": installed, created config, but when I run "fusesmb /home/user/SHARES/", i get an error message: smb.conf is missing.. Where can I get this config?
And one last question: Can someone recommend me a svn-gui? i have tried tried rabbitcvs, esvn and some others .. but all either do not work or crash.
I'm not sure, but maybe I can use svn and tortoise in wine, and checkout/commit the necessary files from/to "home/user/project/"? there raises the questions whether it is possible to install tortoise in wine and how to mount the shares on the wine? How to manage the hard-coded lib-names in some scripts...
So here is what I'm trying to do: I want to share a folder and have it so that guests can access it, but only read. I also want to make it possible that I can mount it as a network drive on my Windows 7 machine and login with my linux account so that I can have write access. This is from a completely stock Ubuntu 8.10 and Samba config. Everytime I've tried I've failed to get it working.
View 1 Replies View RelatedAfter installing Samba as per procedure, Samba does not see Windows "workgroup".
View 4 Replies View RelatedI have sucessfully joined my machine to Windows Active Directory (it wasn't all that complicated ). I was wondering where the uid information for users that login is located and managed? The reason I ask is because we are going to set up a separate NFS server and NFS relies on the uids of the users. I know there are numerous ways I can view the uid for a user (through the use of the id <username> command, do an ls on the /home directory displaying the uid instead of the translated name, etc), but is there a way to have this readily available (almost as the /etc/passwd file is)?
View 1 Replies View RelatedI am trying to connect to a Windows 7 PC through Samba, and while samba can find the Windows 7 PC, it cannot access it, asking for a username and password instead. However, I can access the another Windows XP share perfectly fine.
View 2 Replies View RelatedI'd like to have my Samba client update Windows DNS then join in domain. Computer join in domain but DNS not update.
OS: OpenSUSE 11.3
Try after join in domain:
net ads dns register -d 3
[2010/08/18 20:47:17, 3] param/loadparm.c:9158(lp_load_ex)
lp_load_ex: refreshing parameters
[2010/08/18 20:47:17, 3] param/loadparm.c:4929(init_globals)
Initialising global parameters
[2010/08/18 20:47:17, 2] param/loadparm.c:4788(max_open_files)
rlimit_max: rlimit_max (1024) below minimum Windows limit (16384)
[2010/08/18 20:47:17.871064, 3] ../lib/util/params.c:550(pm_process)
params.cm_process() - Processing configuration file "/etc/samba/smb.conf"
[2010/08/18 20:47:17.874091, 3] param/loadparm.c:7842(do_section)
Processing section "[global]" .....
Windows Workstation update DNS this domain. DNS mydomain.ru resolved.
I can't for the life of me figure out why I cannot browse my own shares from my linux boxes. both run OpenSuSE 11.3 I follow swerdna's tutorials and reboot several times but don't have a clue as to whats going on to prevent me from viewing localhost shares or 2nd linux box shares. I get 'unable to mount location, Failed to retrieve share list from server' error when I click on my workgroup icon in nautilus.
View 7 Replies View Related