Ubuntu Networking :: 10.04 Dont Recognize Any Wireless Network?
Oct 30, 2010I recently installed Ubuntu 10.04 in a HP Compact nc 9010 andan't see any wirelessnetworks
View 9 Replies
ADVERTISEMENT
Ubuntu Networking :: Unable To Recognize The Wireless Network
Feb 5, 2010I installed Kubuntu 9.10 using wubi (dualboot with Windows 7). There were no network connections available, even though I have two that can be used when I switch to Windows. After two hours I got tired of trying to fix the problem and rebooting to no avail, so i uninstalled and installed Ubuntu instead. I've still got the same problem, and after hitting a hole in my wall and shaving my head, I have no idea how to fix the problem. How do i get Ubuntu to recognize my wireless network?
View 9 Replies View RelatedUbuntu Networking :: Doesn't Recognize Wireless Network?
Feb 14, 2010I am exploring Ubuntu 8.10 on my Asus netbook without yet installing it. While using Ubuntu I cannot get it to recognize any wireless networks.Is this because I am only exploring Ubuntu and it has not yet been installed? The networks are recognized when using the XP operating system.Will Ubuntu recognize the wireless networks once it is installed as the operating system?
View 9 Replies View RelatedInstallation :: Ubuntu Dont Recognize Partitions?
May 17, 2010I am trying to install Ubuntu LTS 10.04 on an IBM Lenovo T61 Thinkpad notebook with Windows 7 preinstalled on it. There were two hard drives one 30 GB and other almost 110 GB which (the second one) I resized in three partitions with the help of Windows 7 disk management. Now when I try to install Ubuntu, the partition manager doesn't recognize the newly created partitions it only shows 2 partitions C: and old 100+ GB D:. I had created a separate partition for Ubuntu also but I can't see it so can't install Ubuntu on it, I can't resize the visible partition because it is divided into three actually and I have data on each of three.
View 5 Replies View RelatedUbuntu :: Av Dont Recognize The Windows And The Common Partitions
Mar 12, 2010I've got ubuntu 9.10 in my machine and install avast on it, althought the av dont recognize the windows and the commom partitions. I know that windows is dev/sda1 and the commom is dev/sda5 and in avast, only appears the folder dev, dont appear the subfolders.
View 5 Replies View RelatedFedora Networking :: Wireless Dont Connect After Installation?
Jul 24, 2009I tried Fedora 11 Live CD and if finds and I am able to connect to my wireless network imediately. But now when I have installed Fedora to the hard drive, I can see the wireless network, but when I press connect, it starts connecting, both dots become green but then it just says "Disconnected, the wireless network has been disconnected"
View 1 Replies View RelatedUbuntu Networking :: Router Dont Asign An Ip Adress To Box No Network At All?
Jan 14, 2010just installed ubuntu in 1 of my boxes is an old compaq presario v2000. Is running dual boot with XP, the problem is i dont have internet connection(wireless and wired) with Ubuntu but i do with XP. I read like hundreds of posts from diferent forums and i wrote all crazy commands in terminal but aint working. I tried directly trough the modem (motorolla 2210)and with the router(netgear wgr614) via wired and wireless and aint working either. For some reason ubuntu doesnt request an ip adress from the router or the router dont asign an ip adress to my linux box.
View 7 Replies View RelatedUbuntu Networking :: Corporate Network Login - Dont Provide Root Access
Sep 26, 2010In my company, they provide linux machines which has a 4 yr old Gentoo linux. Also the OS is loaded through Yukon PXE/netboot environment, and the users directory is mounted from an network location. Also they dont provide root access in these machines.
I would love to use the latest Ubuntu in this machine. Please let me know if it is possible to configure a ubuntu/xubuntu in this machine. I need to be able to login with my corporate user_id/passwd, because many of the tools use this for authentication. so just doing a ubuntu installation in this machine and mounting the n/w location would not help.
OpenSUSE Network :: 11.4 Cannot Recognize Wireless Card
May 1, 2011I can't get on the Internet at all not even through Ethernet. (It recognized my Ethernet hardware but doesn't connect.) I got the broadcom-wl drivers from Packman and installed those and it still was a no go. I tried to get the drivers straight from Broadcom and those didn't work. I couldn't compile the source code from the Brodcom site because i could not get build installed (got make installed but build just didn't install.)
Info:
Card
BCM4322
When I enter /sbin/lspci -nnk
Code:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
[Code]....
Ubuntu Networking :: Wireless Do Not Recognize WEP Key
May 16, 2010My problem is the computer does recognize the wireless connections but when I put the wep key It just start trying to connect and then asks for it again, and this goes on and on and on. I'm pretty sure I got the key right so I have no idea whats going on. This happened to me to with the previous version of ubuntu and also with fedora and installations in virtual pc, or virtual box. Even normal installations with partition. This time I'm using wubi. I didn't get anything with the grep part, I must have done something wrong.
1) PC Brand and Model:
Easynote MX65 P 057
2) Wireless brand, model and chipset:
Using grep in lspci -nn I got this:
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Just in case I'll put the whole information:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) .....
Ubuntu Networking :: Getting To Recognize Wireless Card?
Jan 7, 2010Moving this to new topic, since it's no longer under wireless connectivity issues. [Noob Warning] I was having trouble getting Ubuntu to recognize my wireless card, as I have changed from the 3965 that came in my computer to the 4965, which added increased range and G band. Anyway, I read one of the threads on here, and this was the advice given:
Quote:
Originally Posted by pytheas22 First, download this file and save it to your desktop. Then run these commands:
Code:
sudo apt-get install build-essential
wget http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-5000-ucode-5.4.A.11.tar.gz
tar -xzvf iwlwifi*
sudo cp iwlwifi-5000-ucode-5.4.A.11/iwlwifi-5000-1.ucode /lib/firmware
bunzip2 compat-wireless-old
[Code]...
Ubuntu Networking :: 10.04: Does Not Recognize Wireless Usb Adapter
Mar 29, 2010Ubuntu 10.04 does not recognize my wireless usb adapter at all. Its a linksys WUSB100 ver.2.
View 1 Replies View RelatedUbuntu Networking :: Get Kismet To Recognize Wireless?
Dec 3, 2010I'm trying to get Kismet up and running with Ubuntu 10.10 and I'm using an Atheros AR928X, but I don't know what to put in the etc/kismet/kismet.conf file under the line source=
Do I need to install madwifi drivers, or are the drivers that come with Ubuntu sufficient enough? I've been reading other forums and on Google that I should put source=madwifi_g,ath0,madwifi but my device is not ath0, it's wlan0 as shown with the lspci command.
Launching kismet_server: //usr/bin/kismet_server
Suid priv-dropping disabled. This may not be secure.
No specific sources given to be enabled, all will be enabled.
Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng)
Enabling channel hopping.
[Code]....
In some other forum on UbuntuForums someone said to make some changes under SYSTEM>>ADMINISTRATION>>HARDWARE DRIVERS, but I don't have HARDWARE DRIVERS under that submenu. I don't see an option for it anywhere in my version of Ubuntu (Maverick 10.10).
Ubuntu Networking :: KUbuntu 10.10 Does Not Recognize Wireless
Feb 8, 2011I have recently bought a Toshiba Portege R700-15Q and installed kubuntu 10.04. A similar problem happens with kubuntu 10.10 booted from USB stick. I am a long-time linux user but not experienced with fixing problems. The wireless network is not enabled and it appears that linux does not know that there is a wireless capibility. This is both with and without an ethernet connection at boot. The wireless light on the computer is lit up, but when I go to Manage Connections the wireless and mobile broadband tabs are greyed out so can't be accessed.
iwconfig gives "no wireless extensions" for lo, eth0 and pan0.
lspci returns "Network controller: Broadcom Cooperation BCM4313 802.11b/g LP-PHY (rev 01)"
lshw -C network returns "*-network UNCLAIMED", along with a block of other information which does not indicate a problem to me.
Ubuntu Networking :: Can't Get 10.04 To Recognize Wireless Card?
May 19, 2011Today I deleted Windows on my Dell Latitude D610 and instead installed Ubuntu 10.04 on it (I had a cd with 10.04 on it from when I installed it on my desktop a year ago). Everything runs fine except I can't get the wifi to work, and it won't recognize the driver either, actually it doesn't recognize any drivers.
View 4 Replies View RelatedUbuntu Networking :: Wireless Doesn't Recognize Password 10.04
May 8, 2010I had the same problem with normal ubuntu, wubi or even after instaling it in a virtual pc
I've got a wireless router with a WEP security, when I choose my connection and put in the key it just tries for some time and then ask me again for the WEP key. And it goes like this on and on and on, I've tried to connect at some firends gome with the same kind of connection and it doesn't work either.
I think that in an older version I did connect to an unprotected connection but I cannot take out the protection because it is my roomsmate wifi.
Ubuntu Networking :: Fujitsu Amilo Does Not Seem To Recognize The Wireless Card
Feb 7, 2011Just put Ubuntu 10.10 on my Fujitsu Amilo Li1818 and it does not seem to recognise the wireless card. If I click on the network icon in the top bar there is no mention of wireless.
View 1 Replies View RelatedUbuntu Networking :: Doesn't Recognize Any Wireless Networks After First Installation
Apr 4, 2011I recently installed ubuntu 10 on my Compaq mini 730ej. I installed it using the wubi software. Although it works fine with regular lAN connection, it doesn't recognize any wireless networks - when I click the icon I see a "missing firmware" massage. Now - I am a linux newbie, so be gentle, but I would very much like to solve this problem since.So what can I do?
View 9 Replies View RelatedUbuntu Networking :: Ralink 802.11 N WLAN Usb - Does Not Recognize Any Network
Dec 27, 2010I bought an USB-WLAN stick, which does not recognize any network. A Ralink 802.11 bg WLAN Stick works fine, but the Ralink 802.11 n WLAN Stick does not work unfortunately. Both get recognized by the nm-applet of network manager but only the first one recognizes my network and is able to connect to it.
[Code]....
OpenSUSE Network :: Dont Get Any Network Icon
Apr 17, 2010I tried to use the Network manager but could't get it working so I disabled it and I set up my eth card and a dsl connection,it's work perfectly but I dont get any network icon ,can someoen tell me witch tool I can use,a beautifull one.
View 9 Replies View RelatedUbuntu Networking :: Broadcom B43 Wont Turn On/ Recognize Wireless Signals?
Nov 21, 2010So I just loaded ubuntu 10.10....and it works great...except for my wirelessi've got a broadcom b43 ...i went into system, administration, download additional drivers and downloaded/authenticated a b43 driver, but my machine (hp dv4405) does not recognize any wireless signals. The wireless light on my computer doesnt turn on (there's a button to turn it on and off) anyways...it's annoying. I guess broadcom recently released some open source drivers, but I'm having trouble sorting through all the info
View 3 Replies View RelatedNetworking :: Slackware Can't Recognize Network Cards
Mar 29, 2011I have installed slackware 13.1 64-bit version and can not recognize network cards.I'm with laptop acer aspire 7540g.Wireless card is atheros ar5b93.Ethernet card is Broadcom NetLink � Gigabit Ethernet.
View 16 Replies View RelatedUbuntu Networking :: Network Manager Doesn't Recognize Nas0 Interface?
Dec 23, 2010Network manager doesn't recognize nas0 interface and i have problems with using Gwibber, Evolution mail,Empathy, etc Is there any way to add nas0 in Network manager?? I know the solution to remove Network manager, but i need Network manager because i'm often using wireless (as second internet connection).
View 1 Replies View RelatedOpenSUSE Wireless :: Dont Have Connectivity In My Laptop ?
Mar 6, 2010I have bought a new Insipirion 1464.Installed a OpenSuse 11.0 ,Gnome Desktop .
I dont have wireless connectivity in my laptop(i hve never used Wireless ).
I have done following step
1)Checked for wireless card in Hardware Information ==> was present Wireless 1397 wlan min-card from broadcom family
2)Checked for firmware dmesg|grep firmware ==>no output
3)Then checked for access points
PHP Code:
Fedora X86/64bit :: 15 Dont Recongnize Broadcom BCM 4322 Wireless Card?
Aug 6, 2011I am a newbie in rpm files, I am testing Fedora 15 (gnome3),nd I liked it, congratulations to Fedora Team, I was using Linux mint9, and I have a certainly experience with .deb files and APT, but .rpm and YUM, I am a little lost...I have a HP Pavilion dv2-1110us laptop with a Broadcom BCM 4322 wireless card; the netwokmannager said "wireless firmware missing"How can I install it?There is in the Fedora repositories?
View 5 Replies View RelatedFedora Networking :: Network Manager Didn't Recognize NVidia MCP67 Ethernet [10de:054c] (rev A2)?
Oct 25, 2009The Network manager didn't recognize my eth0 device as a maned device.In shell I can use my eth0 but not by Gnome Network Manager.My device is nVidia Corporation MCP67 Ethernet [10de:054c] (rev a2) and I'm running a Fedora 11. On previous version like, Fedora 10 an 9 this board was managed normally by network manager.Anyone already set up this board on Network Manager ?My Notebook is a HP dv2736us and I'm using a Fedora 11 64bits.
View 6 Replies View RelatedUbuntu Networking :: Get Wireless Network Adapter To Be Read By 'Windows Wireless Drivers'
Nov 24, 2010I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
Ubuntu Networking :: Wireless Unstable In 10.04 - AR5001 Wireless Network Adapter
Aug 30, 2010I am severe wireless problems with Ubuntu 10.04 on my laptop.(Spec below)
I have just performed the first clean install since new. Installed a new Hard Drive as well. The machine and wifi was fine under Ubuntu 9.04.
It is booting much faster now but the wifi keeps dropping off.
Spec:
Machine - Acer Aspire 4310
Wireless card - *-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
[Code].....
Ubuntu Networking :: Wireless Card - No Longer To Connect To A Wireless Network
Jun 17, 2011The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies View RelatedUbuntu Networking :: Belkin Enhanced Wireless USB Network Adapter - Windows Wireless Drivers App Doesn't Work
Feb 3, 2010I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...