Ubuntu Networking :: No Wireless After Latest Update?
Jan 9, 2010
Creating a new thread for the specific chipset. Laptop is an Acer 5534 with the Atheros chipset. Normally uses the Ath9k driver. To get it to work originally I had to download, compile and install the latest compat_wireless drivers. See post here: {URL] I did the update that came through today and after the reboot there was no wireless internet. It alternates between reboots between having no wireless networks at all detected to never connection to the [AUTO] network previously defined. To fix the problem, I downloaded the latest compat_wireless, compat-wireless-2009-12-11.tar.bz2, and followed the same procedure. I did not do a make clean. To solve the problem temporarily, I edited the grub config and set default to 2 instead of 0 (1 would be 0 in recovery mode).
View 1 Replies
ADVERTISEMENT
Sep 30, 2010
As the title says i updated my system which then needed a reboot. I also installed Mixxx djing software to try it out. So i thought id just restart the system. Usually when i boot into my desktop wireless automatically can connect to my router but not this time, wired only for now... i know theres tons of wireless issue threads but some more experienced users will be able to get straight to the point and run through some diagnostics with me.
View 1 Replies
View Related
Oct 30, 2010
On my ageing laptop with Intel IPW3945 wireless adapter which has always worked extremely well.... Fedora 13 with the latest NetworkManager. Seems that wireless speed has slowed to a crawl.
Code:
[glenn@leonardo ~>$ rpm -qa | grep NetworkManager
NetworkManager-vpnc-0.8.1-1.fc13.i686
NetworkManager-pptp-0.8.1-1.fc13.i686
[code]....
View 6 Replies
View Related
Feb 1, 2010
i have a acer aspire one (zg5) with a 2 week old installation of unr. shortly but not immediately following my last update my wifi no longer functions. when i go to the network connections tab in my toolbar it does not list available wifi networks. does not apparently recognize wifi capability at all. but the wifi worked right off the rip on new install.
View 3 Replies
View Related
Jun 1, 2010
I updated this morning to the latest bugfixes for F13. For some reason, networking has become un-available after the required re-start. I am using a fixed IP. Tried to add eth0 DHCP, which initially worked, but became unavailable after a few minutes as well. I suspect there may be an issue with the card's MAC address which may or may not be detected correctly.. Has Networking been updated somehow in this bugfix release?
View 2 Replies
View Related
Apr 18, 2010
I have a Lenovo IdeaPad s10 which worked flawlessly with wired, I could never get it to so much as search for a wireless network, so I gave up on it long ago.
I'm using UNR 9.10 on it and today, after updating Wicd Network Manager stopped working making it impossible for me to go online with the netbook even when using a wired connection.
I restarted the computer after the update and once UNR booted up wicd wanted root access to use my computer's network cards, I entered my password, this never happened before but whatever, unfortunately after I entered my password wicd didn't show up in the tray and sure enough there was no internet connection whatsoever.
I tried running wicd manually, UNR says opening, but nothing comes up, no tray icon no nothing.
View 3 Replies
View Related
Jan 21, 2010
I'm having problems installing Cowpatty
running make produces
cc -pipe -Wall -DOPENSSL -O2 -g3 -ggdb -c -o md5.o md5.c
md5.c:20:25: error: openssl/md5.h: No such file or directory
md5.c: In function md5_mac:
md5.c:28: error: MD5_CTX undeclared (first use in this function)
md5.c:28: error: (Each undeclared identifier is reported only once
md5.c:28: error: for each function it appears in.)
[Code].....
Running Ubuntu 9.10 (i386) with latest patches from update manager. If I try using the 4.2 archive I get the same result.
I have similar problems with aircrack-ng suite, but I'll leave that until later!
View 5 Replies
View Related
Aug 6, 2011
I had 10.04 and my wireless worked out of the box.
I just installed the latest and my wireless says "firmware missing"
The card is : 00:09.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
View 1 Replies
View Related
Sep 25, 2010
When I try to update the latest from Update Manager I get this message:
Please insert the disk labeled: Ubuntu 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.1) in drive /cdrom/
I'm running 9.10. I don't know why I'm getting this message, does anyone here know why this is happening?
View 3 Replies
View Related
Jan 2, 2010
I juset reinstalled my ubuntu and i can't update to the latest kernel. I'm stuck at 2.6.31-15. Also my grub is v1.94 Beta4 and can't upgrade it to grub2.
View 7 Replies
View Related
Jul 3, 2010
I've searched a dozen or more threads, some say there is no such thing as rolling back an update, others say it can be done, but I can't find one that outlines how to do it.
View 2 Replies
View Related
Nov 27, 2010
This is old P4 laptop, Intel845G graphics (which I know is very troublesome).However, it works fine with the 2.6.35.22, but the update to 2.6.35.23 kills X during the boot process. Everything else works fine.Anyone else experiencing any difficulty with X and this kernel update?
View 3 Replies
View Related
Jan 6, 2011
I did installed LMMS [URL] in Ubuntu 10.10, but it did installed the 0.4.5 version which is not very stable, I wanted to install the latest 0.4.9 (which in the Windows version is much better than the 0.4.5).
View 4 Replies
View Related
Jul 1, 2011
Eclipse no longer works in 10.10 desktop 64bit, latest update.
The error:
The program 'Eclipse' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadMatch (invalid parameter attributes)'.
(Details: serial 10174 error_code 8 request_code 153 minor_code 4)
[Code]....
View 4 Replies
View Related
Mar 22, 2010
I have installed xubuntu with wubi from XP. The installation was OK, I have booted the system several times with no problem, all devices worked well. After a day, auto update have shown that I have lots of packages to update. I said OK, let's do it. After a restart the wifi led was not lit anymore. I am unable to discover any wifi networks.. Fortunately I still have my old XP to write to the forum.. What can I do? The hardware: Compal CL56 notebook with Intel Pro 2200BG wifi. (and ATI Mobility Radeon 9700 - which will cause the next problems.?)
View 3 Replies
View Related
Jun 10, 2010
I've been running Ubuntu 10.04 x64 for about a week now, and it's been working flawlessly until today. This morning when attempting to connect to my wireless network, I click on the wireless icon (which currently has an ! next to it), find my network, and it begins to seem as if it is connecting, but then a pop-up comes up stating: "Wireless Network -- disconnected". No matter how many times I restart or attempt to connect to the network, it will not connect. I can see that the adapter is working, as it sees my network and others; however, it will not connect, it continually seems as if it's trying, then the pop-up comes up stating it has been disconnected. Here's my info:
Running on an HP Pavilion dv4...
Code:
sudo lspci
produces:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:01.0 PCI bridge: Hewlett-Packard Company Device 9602
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
[code]...
Also, running Ubuntu 10.04 LTS -- 2.6.32-22-generic x86_64
View 3 Replies
View Related
Jun 13, 2011
after giving me no problems whatsoever (currently 10.04 Lucid Lynx) I lost wireless connectivity on my laptop after the following updates were processed yesterday:
Commit Log for Sun Jun 12 16:18:28 2011
Upgraded the following packages:
dkms (2.1.1.2-2fakesync1) to 2.1.1.2-2ubuntu1
flashplugin-installer (10.3.181.14ubuntu0.10.04.1) to 10.3.181.22ubuntu0.10.04.1
flashplugin-nonfree (10.3.181.14ubuntu0.10.04.1) to 10.3.181.22ubuntu0.10.04.1
[Code].....
but as it all worked fine before and this was just an update not an upgrade I suppose drivers etc are all OK anyway.
Also, rfkill showed nothing was blocked to need unblocking, and ifconfig gives a permissions error
I have a wired connection operating without any problems at all.
View 2 Replies
View Related
Jan 2, 2010
How do I update to the latest java version?
View 9 Replies
View Related
Jan 28, 2011
I'm running 10.10 on a Lenovo x200. I have been running, happily, with 10.10. Yesterday, the update manager installed:
PHP Code:
After this update I am unable to Suspend. The screen goes black, the harddisk spins, the moon blinks a couple of time and then I'm presented with the Lock Screen.
I have:
Kernel Linux 2.6.35-25-generic-pae
3.6 Gib of Memory
Availabe disk space of 75.6 GB
View 7 Replies
View Related
Mar 13, 2011
Update to latest kernel 2.6.38?
Code:
paneas@paneasbox:~$ uname -a
Linux paneasbox 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 x86_64 GNU/Linux
I want to update my kernel to the latest version from kernel.org, which is the mainline 2.6.38-rc8 .
EDIT: I found this guide [URL].. and I will give it a try
View 1 Replies
View Related
Aug 18, 2011
When I tried to install the last update. I got a failure error.
View 8 Replies
View Related
Feb 9, 2010
I configured my Xubuntu laptop to work with my Netgear Wireless router to connect to the Internet. I was able to connect, and downloaded Hardy updates of 184 MB. After installation of the updates, the system prompted me to restart. The Wireless network is not working since then. Tried reconfiguring, but to no avail. The proprietary drivers for my wireless network card have been downloaded and installed... remember, it worked well enough download the updates! Posting this from my Windows partition using the same wireless network A previous thread [URL]...k+Hardy+update) with the same issue seems to have hit a roadblock...
View 1 Replies
View Related
Aug 14, 2010
Everything was working great till I updated about 8 days ago! I have since been un able to find a solution.
PC Modle MSI Wind U230
lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
[Code]....
View 3 Replies
View Related
Sep 21, 2010
I am running UNR on an Asus T91MT and everything was working great until an update yesterday, my OS froze while updating and I had to do a hard reboot. Since, I have not been able to get wireless, and lshw does not even recognize the presence of a wireless device on the system.
View 1 Replies
View Related
Nov 7, 2010
I am running Ubuntu 10.10
I am using an Intel WiFi Link 4965AGN built in adapter.
When I was prompted for a system-update I clicked Update and apparently something failed an only a partial-update happened. Now my wireless/Ethernet connections do not work. I tried enabling all Network Adapters but that option is no longer available in the "Preference/Administration" tab.
Note: I cannot access the internet at all on that partition so I can't download any updates from repositories.
View 2 Replies
View Related
Nov 18, 2010
10.04 was connecting to wireless on boot up without a problem.After updating, it can no longer do it. I have to click on the wireless icon (which has an exclamation mark through it) and connect to hidden. I can then choose my wireless profile and am asked for my elevated privileges password. Once supplied, the connection is made.I presume the encryption password is 'locked' now at boot.
View 2 Replies
View Related
Dec 17, 2010
yesterday I let the update manager install a whole bunch of updates for my 10.04 install on my MSI Notebook ER710. My wireless was just working peachy until then (with the madwifi drivers), but after the update, no more... I checked the madwifi, tried a new make, but nothing worked.
So, after reading somewhere that 10.10 had less issues with wireless I decided to upgrade to 10.10 in the hope that that would solve my problem.
Well, partly it did, as in, according to my system I've got a wireless again and this morning even, it was able to see wireless networks! Unfortunately I couldn't connect to mine, although the key was correct. At some point I lost the ability to see wireless networks again. I tried wicd too, but no luck their either. It recognizes my card but can't see any networks.
here is all the info:
Machine Brand and Model (PC/Laptop): MSI ER710
lspci
Code:
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
[Code].....
View 1 Replies
View Related
Aug 23, 2011
i have got an HP Pavilion g6-1142sl and i installed on it ubuntu 11.04. i have some problems with the wireless. i have already read a post on this forum wich explained how to get drivers here the link: [URL] i got them and the wireless started working (a month ago) now, a couple of days ago it stopped working when i did a restart due to an automatic update. and that is what i can see with terminal:
[Code]...
what can i do in order to have a working wireless? i am sorry if my english is not properly good but i am italian.
View 9 Replies
View Related
Jan 10, 2010
I can't go into text mode after latest kernel update. CTRL-ALT-F1 doesn't work. Actually, all CTRL-ALT-F1 to F7 work very strange. For example... When I click CTRL-ALT-F2, it close all my windows and screen flash
View 1 Replies
View Related
Apr 27, 2010
Is there a way to upgrade cups to support the latest printers? For example if I am using 8.04 LTS server and I buy a newish printer, it won't work. Am I able to add a repository or apt-get upgrade to get the latest version?
View 5 Replies
View Related
