Update to latest kernel 2.6.38?
Code:
paneas@paneasbox:~$ uname -a
Linux paneasbox 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 x86_64 GNU/Linux
I want to update my kernel to the latest version from kernel.org, which is the mainline 2.6.38-rc8 .
EDIT: I found this guide [URL].. and I will give it a try
I juset reinstalled my ubuntu and i can't update to the latest kernel. I'm stuck at 2.6.31-15. Also my grub is v1.94 Beta4 and can't upgrade it to grub2.
View 7 Replies View RelatedThis is old P4 laptop, Intel845G graphics (which I know is very troublesome).However, it works fine with the 2.6.35.22, but the update to 2.6.35.23 kills X during the boot process. Everything else works fine.Anyone else experiencing any difficulty with X and this kernel update?
View 3 Replies View RelatedI can't go into text mode after latest kernel update. CTRL-ALT-F1 doesn't work. Actually, all CTRL-ALT-F1 to F7 work very strange. For example... When I click CTRL-ALT-F2, it close all my windows and screen flash
View 1 Replies View RelatedI am running Maverick via Wubi. I just completed a Kernel upgrade and when I restart into Ubuntu it just goes to a Bash prompt. I am not sure exactly what version I updated to so I haven't logged a bug report yet.
View 1 Replies View RelatedMy computer boots a lot slower after the last kernel update. It boots fine to the log in screen, but after I log in it is slow.
New kernel: 2.6.35-24-generic
Ubuntu 10.10 latest kernel 2.6.35-28.49 update is broken. update just stalls when it gets to this.Quote:
Sub-process /usr/bin/dpkg returned an error code (1)...generating grub.cfg I have tried the following to no avail..Quote: sudo apt-get install -f sudo dpkg --configure -a sudo apt-get update && sudo apt-get upgrade
I have not changed any hardware.
I have noticed that my battery-status applet icon, which appears next to the wireless symbol in the notification applet on the menu bar at the top of the screen, only appears for a second or two when I plug in my notebook and then disappears. It does not appear at all when the notebook is unplugged. just noticed this behaviorafter restarting with the new kernel
View 1 Replies View RelatedI have a Macbook Pro 5,5. I had Fedora 14 installed on it, updated to the latest version. I updated the kernel, and performed an update. Now, every time my system starts, it loads up the startup fedora bar, and it gets stuck at the bar being loaded 100%.I press ESC to see what is going on behind the scenes, and I notice that the problem is that atd cannot start up.
View 2 Replies View RelatedI tried the following command with no succes (all with sudo):
update-grub
aptitude safe-upgrade
aptitude full-upgrade
[code]...
The latest Kernel update (2.6.35-25-generic) killed all my sound output on my Toshiba Satellite M115.
I tried reinstalling all ALSA components and plugins. No luck there.
Rebooting into 2.6.35-24-generic fixes the problem, in that my sound works again.
Dual Boot: Fedora 12 and XP Dell 505I've had trouble with the latest kernel update.I updated a bunch of packages recently (including Xorg and kernel), and noticed a severe flickering after the update on my center monitor (Samsung T260 - the laptop display did not exhibit the flickering behavior). I backed out all the changes and started updating package by package. After I updated the kernel (again) I rebooted and here's where the fun part is -
I no longer get anything, except the cursor. No grub menu, no grub prompt. I rebooted and ran the rescue disk and followed the procedurery and point grub at the right boot partition - see here. However (obviously or I wouldn't be posting) that failed to work. I still get a blinking cursor and dead system on boot up.
opensuse v11.2linux 2.6.31.12-0.1-desktop x86_64The kernel symbol file is still at 2.6.31.3. Apparently the symbol file did not get updated with the rest of the kernel development files. At least one program does not build because of that
View 9 Replies View RelatedI am using OpenSUSE 11.4 64 bit with GNOME. I also use the Tumbleweed and Packman for Tumbleweed repositories. Accoording to uname -r, my current kernel version is 2.6.37.1-1.2-desktop.
How do I safely update to the latest stable kernel version?
I am new to OpenSUSE. Please provide step by step directions.
I recently updated my kernel and now can no longer tether my iphone to my openSUSE11.3(x64) laptop. Before the update I could tether.Same machine dual boots to Win7-64bit and can tether just fine.I re-installed the libimobile packages, but my linux no longer recognizes the iphone as a network device.t DOES pop-up some boxes asking if I want to play the media, or view the photos on the iPhone - so that part is working
View 1 Replies View RelatedI seem unable to get an nvidia driver working properly after upgrading to the latest kernel with Fedora 11.Here is my laptop and its specs: http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN[URL]I've tried both the kmod and akmod unsuccessfully. Everytime it gives me a black screen on boot, I can fix the problem by popping in the LiveCD, and changing the xorg.conf file back to the backup.Here are the errors/warnings from my boot.log file:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Checking for module nvidia.ko: [60G[[0;31mFAILED[0;39m]
[code].....
Twice now I have received update notices informing me of header upgrades which I installed, both required a restart of the system. Usually when this happens there is an additional item in the grub menu. The last two times this has happened I didn't get an additional menu item. What is the latest stable version? I am currently running:
2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:21:58 UTC 2010 x86_64 GNU/Linux
I did try a "sudo update-grub2" and the menu didn't change.
I'm running Hardy 8.04 LTS 64bit. The Update Manager updated the kernel and then asked if I wanted to use the local version of the grub menu. The boot menu was getting so long I edited it to shorten it. Other options were also offered, like the builder's version, but I chose the local version and since then the new kernel doesn't show up in the boot menu. Sudo update-grub doesn't restore it to the menu.
How do I undo the local version of the boot menu so I can see the newest kernel?
My server started to throw the following errors at me:
Quote:Message from syslogd@ at Wed Nov 24 22:17:13 2010 ... server kernel: Uhhuh. NMI received for unknown reason 2d.
Message from syslogd@ at Wed Nov 24 22:17:13 2010 ... server kernel: Do you have a strange power saving mode enabled?
Message from syslogd@ at Wed Nov 24 22:17:13 2010 ... server kernel: Dazed and confused, but trying to continue
Since the rollout of the latest 8.10 kernel update (2.6.27-11) my machine has been very messy. During the update the initrd was not building (showing errors). I managed to build the initrd manually and then it worked for a while.
But since a few days the kernel fails again completely. It looks like many kernel-modules are not loading BUT dmesg & syslog do not show relevant errors.
The result is:
- no networking
- no cpu frequency scaling
- no nvidia driver (nv drivers works normal)
- .......
I have been on Linux since 2003 but have never seen this before.
I am getting a black screen on the latest kernel upgrade 2.6.31-20. My computer completely boots up, but goes black after a minute or two. For now, I am booting up with the previous kernel.
View 3 Replies View RelatedIs there a way to upgrade cups to support the latest printers? For example if I am using 8.04 LTS server and I buy a newish printer, it won't work. Am I able to add a repository or apt-get upgrade to get the latest version?
View 5 Replies View RelatedI have duel boot Windows XP and Ubuntu 910. I've just downloaded and installed the latest update for Ubuntu 9.10. After my latest update, Windows will no longer start. When I select Windows from the grub loader, the screen goes black with a blinking white horizontal cursor at the top left of the screen. I have read that it may of something to do with "update from Karmic to Lucid", what ever that is.
View 1 Replies View RelatedThe quality of my display has changed overnight from ok to amazingly good. I assume something has been upgraded in the latest update. Is there a way of listing the latest changes? I just want to know what has brought about this amazing transformation.
View 4 Replies View RelatedI have installed ubuntu 10.04 64 bit in April and it has worked flawlessly. However, today I ws prompted to install Kernel updates. Now when I try to boot it continually cycles between a black screen and the NVIDIA logo.
Yes I have been using the nvidia drivers previously but without incident till now.
I have tried crtl-alt-f1 but this does not stop the cycling.
I user installed the latest updates as per the update manager. My EDVO card will now not initialize. No /dev/ttyUSBn devcies for it.
View 1 Replies View RelatedI have just installed the latest update for Ubuntu 10.04, however upon requested restart i now boot to a black screen. the boot sequence is system post, followed by the generic Purple UBUNTU loading screen, following that you just get a black screen.
AMD x64
4Gb RAM
120GB Intel SSD
ATI RAIDON 3650
There's some bug or other error in the updates I've just installed. I run Update Manager very frequently (almost daily). The last time I ran it was 2 days ago, so this bug can only have been released into updates today or yesterday. I ran it this evening and there were quite a lot of new updates (around 50mb in total), and I installed them all without really checking to see what they were - but as I'm new to Linux I don't exactly have any weird or rare software running on my laptop, so they only would have been for Ubuntu itself or some very common programs.
After installing it required a reboot. Upon booting up again, the volume icon has turned to 'Mute All' and I am unable to turn my laptop off. Telling it to shut down simply causes the screen to go black for a couple of seconds and then return to the login screen. I also notice that the Suspend/Hibernate options have disappeared, and I now only have the option to Log Out, Restart or Shut Down. {As I'm new to Linux I have no idea how best to proceed, or even how to officially 'report' this if indeed it is a bug contained in one of the updates.}
I have noticed in the recent updates there is a Kernel update 2.6.32-22 but there is no restricted modules included. On my Desktop I have a Nvidia card which I installed the driver using the Hardware Drivers Application. As far as I know these Drivers are ether reinstalled or updated whenever there is a kernel update.
I also have a Laptop with a ATI Radeon card which I did run the updates and ended up (after the reboot) in low graphics mode, after a bit of work I was able to reinstall the drivers and get my desktop back so that's ok now.
I had this problem a few years ago with an old version of Ubuntu, kernel updates but no restricted drivers. The drivers turned up the next day and all was fine. I was just wandering if this is a known issue with Lucid or if anyone else has had this problem, It's been a couple of days since I noticed the Kernel update but still Restricted Modules. Oh I'm using Ubuntu Lucid 10.04
After the latest update of testing, Debian started to reboot at at startup, after just few messages shown (that's all after GRUB choice is made). If I pick up older kernel it boots OK. What should I look for to determine the cause? (I.e. what log etc.).
View 4 Replies View Related