I can't go into text mode after latest kernel update. CTRL-ALT-F1 doesn't work. Actually, all CTRL-ALT-F1 to F7 work very strange. For example... When I click CTRL-ALT-F2, it close all my windows and screen flash
View 1 Replies
I juset reinstalled my ubuntu and i can't update to the latest kernel. I'm stuck at 2.6.31-15. Also my grub is v1.94 Beta4 and can't upgrade it to grub2.
View 7 Replies View RelatedThis is old P4 laptop, Intel845G graphics (which I know is very troublesome).However, it works fine with the 2.6.35.22, but the update to 2.6.35.23 kills X during the boot process. Everything else works fine.Anyone else experiencing any difficulty with X and this kernel update?
View 3 Replies View RelatedUpdate to latest kernel 2.6.38?
Code:
paneas@paneasbox:~$ uname -a
Linux paneasbox 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 x86_64 GNU/Linux
I want to update my kernel to the latest version from kernel.org, which is the mainline 2.6.38-rc8 .
EDIT: I found this guide [URL].. and I will give it a try
I am running Maverick via Wubi. I just completed a Kernel upgrade and when I restart into Ubuntu it just goes to a Bash prompt. I am not sure exactly what version I updated to so I haven't logged a bug report yet.
View 1 Replies View RelatedMy computer boots a lot slower after the last kernel update. It boots fine to the log in screen, but after I log in it is slow.
New kernel: 2.6.35-24-generic
Ubuntu 10.10 latest kernel 2.6.35-28.49 update is broken. update just stalls when it gets to this.Quote:
Sub-process /usr/bin/dpkg returned an error code (1)...generating grub.cfg I have tried the following to no avail..Quote: sudo apt-get install -f sudo dpkg --configure -a sudo apt-get update && sudo apt-get upgrade
I have not changed any hardware.
I have noticed that my battery-status applet icon, which appears next to the wireless symbol in the notification applet on the menu bar at the top of the screen, only appears for a second or two when I plug in my notebook and then disappears. It does not appear at all when the notebook is unplugged. just noticed this behaviorafter restarting with the new kernel
View 1 Replies View RelatedI have a Macbook Pro 5,5. I had Fedora 14 installed on it, updated to the latest version. I updated the kernel, and performed an update. Now, every time my system starts, it loads up the startup fedora bar, and it gets stuck at the bar being loaded 100%.I press ESC to see what is going on behind the scenes, and I notice that the problem is that atd cannot start up.
View 2 Replies View RelatedI tried the following command with no succes (all with sudo):
update-grub
aptitude safe-upgrade
aptitude full-upgrade
[code]...
The latest Kernel update (2.6.35-25-generic) killed all my sound output on my Toshiba Satellite M115.
I tried reinstalling all ALSA components and plugins. No luck there.
Rebooting into 2.6.35-24-generic fixes the problem, in that my sound works again.
Dual Boot: Fedora 12 and XP Dell 505I've had trouble with the latest kernel update.I updated a bunch of packages recently (including Xorg and kernel), and noticed a severe flickering after the update on my center monitor (Samsung T260 - the laptop display did not exhibit the flickering behavior). I backed out all the changes and started updating package by package. After I updated the kernel (again) I rebooted and here's where the fun part is -
I no longer get anything, except the cursor. No grub menu, no grub prompt. I rebooted and ran the rescue disk and followed the procedurery and point grub at the right boot partition - see here. However (obviously or I wouldn't be posting) that failed to work. I still get a blinking cursor and dead system on boot up.
opensuse v11.2linux 2.6.31.12-0.1-desktop x86_64The kernel symbol file is still at 2.6.31.3. Apparently the symbol file did not get updated with the rest of the kernel development files. At least one program does not build because of that
View 9 Replies View RelatedI am using OpenSUSE 11.4 64 bit with GNOME. I also use the Tumbleweed and Packman for Tumbleweed repositories. Accoording to uname -r, my current kernel version is 2.6.37.1-1.2-desktop.
How do I safely update to the latest stable kernel version?
I am new to OpenSUSE. Please provide step by step directions.
I recently updated my kernel and now can no longer tether my iphone to my openSUSE11.3(x64) laptop. Before the update I could tether.Same machine dual boots to Win7-64bit and can tether just fine.I re-installed the libimobile packages, but my linux no longer recognizes the iphone as a network device.t DOES pop-up some boxes asking if I want to play the media, or view the photos on the iPhone - so that part is working
View 1 Replies View RelatedI seem unable to get an nvidia driver working properly after upgrading to the latest kernel with Fedora 11.Here is my laptop and its specs: http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN[URL]I've tried both the kmod and akmod unsuccessfully. Everytime it gives me a black screen on boot, I can fix the problem by popping in the LiveCD, and changing the xorg.conf file back to the backup.Here are the errors/warnings from my boot.log file:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Checking for module nvidia.ko: [60G[[0;31mFAILED[0;39m]
[code].....
I originally installed Ubuntu 9.10 on my old 32bit Pentium Hp/Compaq dc7100 business desktop, which also has Windows XP installed. It worked fine with the gnome interface, showing the desktop on boot. Over the past year, I used the built in update manager to update the system and apps to 10.04, then 10.10, and a couple of days ago to further 10.10 updates.Last time I booted, it performed a disk check, then booted to a text-mode login-prompt, like on the old UNIX systems before the X gui system got developed.
I have no clue how to launch gnome or x11 and get my desktop back. I don't have the knowledge (or patience) to operate Linux from a command prompt in text-only mode.Will someone tell me how to get UBUNTU 10.10 to launch x11 gnome and show my desktop?I remember having the same problem when I first updated to 10.10, but I don't recall what I did to get the desktop to appear on the display.
My server started to throw the following errors at me:
Quote:Message from syslogd@ at Wed Nov 24 22:17:13 2010 ... server kernel: Uhhuh. NMI received for unknown reason 2d.
Message from syslogd@ at Wed Nov 24 22:17:13 2010 ... server kernel: Do you have a strange power saving mode enabled?
Message from syslogd@ at Wed Nov 24 22:17:13 2010 ... server kernel: Dazed and confused, but trying to continue
Since the rollout of the latest 8.10 kernel update (2.6.27-11) my machine has been very messy. During the update the initrd was not building (showing errors). I managed to build the initrd manually and then it worked for a while.
But since a few days the kernel fails again completely. It looks like many kernel-modules are not loading BUT dmesg & syslog do not show relevant errors.
The result is:
- no networking
- no cpu frequency scaling
- no nvidia driver (nv drivers works normal)
- .......
I have been on Linux since 2003 but have never seen this before.
I installed Centos 5.4 on my Pentium E5300 new comp, but I need IPX support in my work. It's simple - ipxutils and ncpfs from Fedora Core and new kernel with ipx support. I copied kernel config from /boot folder and activate ipx, ntfs support, and choose processor core 2 duo. New kernel (2.6.26) works OK, but I got one problem - when start it still shows message: "kernel: HUB 1.0:1.0 unable to enumerate USB device on port 1 (or 2, 3)" and stops after logging (text mode)
I got 2 USB devices connected - printer HP D5160 PhotoSmart and Scanner A3 USB Mustek, and I know scanner cause that messages but I don't understand why. Kernel config is the same like that from distro kernel (almost - ipx, ntfs and proc), but distro kernel doesn't do that. So I got 2 questions:
1. Why
2. What to do to stop that (disconnecting devices on boot time is not a solution)
The system always boot up in Graphic Mode. After installation of Web Server, I want to disable Graphic Mode and change it to boot to Text Mode to save memory. Is there a way to disable graphic mode?
View 1 Replies View RelatedI have some issues concerning so called "11-minutes-mode" - RTC update"11-minutes-mode" definition In hwclock man page we can read:"Automatic Hardware Clock Synchronization By the KernelYou should be aware of another way that the Hardware Clock is kept synchronized in some systems. The Linux kernel has a mode wherein it copies the System Time to the Hardware Clock every 11 minutes. This is a good mode to use when you are using something sophisticated like ntp to keep your System Time synchronized. (ntp is a way to keep your System Time synchronized either to a time server somewhere on the network or to a radio clock hooked up to your system. See RFC 1305).
This mode (we'll call it "11 minute mode") is off until something turns it on. The ntp daemon xntpd is one thing that turns it on. You can turn it off by running anything, including hwclock --hctosys, that sets the System Time the old fashioned way. To see if it is on or off, use the command adjtimex --print and look at the value of "status". If the "64" bit of this number (expressed in binary) equal to 0, 11 minute mode is on. Otherwise, it is off. If your system runs with 11 minute mode on, don't use hwclock --adjust or hwclock --hctosys. You'll just make a mess. It is acceptable to use a hwclock --hctosys at startup time to get a reasonable System Time until your system is able to set the System Time from the external source and start 11 minute mode. Here are my questions:1 . How to check if "11-minutes-mode" is on/off ?The output of adjtimex -p looks like this:
mode: 0
offset: 17504
frequency: 6140386
[code]...
As the title says i updated my system which then needed a reboot. I also installed Mixxx djing software to try it out. So i thought id just restart the system. Usually when i boot into my desktop wireless automatically can connect to my router but not this time, wired only for now... i know theres tons of wireless issue threads but some more experienced users will be able to get straight to the point and run through some diagnostics with me.
View 1 Replies View RelatedWhen I try to update the latest from Update Manager I get this message:
Please insert the disk labeled: Ubuntu 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.1) in drive /cdrom/
I'm running 9.10. I don't know why I'm getting this message, does anyone here know why this is happening?
After update of adobe plugin to version 10.1.102.64 (10.1.r102) plugin crashes if I try to switch to full screen. Previous plugin (10.1.53.64) worked perfectly well. Anybody with the same problem? My system is System76 Gazelle, Ubuntu 8.04 with all latest updates, nvidia drivers.
Additional info:
1. Same effect in Google Chrome, which uses its own plugin 10.1.r103
2. Same effect (both in Firefox and Chrome) on Thinkpad T41 with ubuntu 8.04
I downgraded plugin to r53 for now, but it's not a good idea, last update fixed some security issues.
I know the latest kernel for 10.04 is 2.6.35.4, however all Synaptic shows is 2.6.32 versions.How do I get the latest kernels to show up in Synaptic? Barring that, is there a .deb package somewhere that installs it?
View 2 Replies View RelatedI am looking for instructions on how to install the latest 3.0.3 kernel, and I can't seem to find much. I downloaded the necessary files from kernel.org, and they are currently contained in my downloads folder.How do I install this, now? Is there an easier way, like a PPA option to download and install from?
View 8 Replies View RelatedI want to have a linux distro thata has the newest kernel thats out now ,which kernelss would yuou recommend? or how would you download the newest kernel for fedora 13? or ubuntu. im using a acer aspire netbook and want to get some things to work.
View 6 Replies View RelatedI just did a fresh install of Ubuntu 10.10 and after running the Update Manager and restarting, I get the following message upon boot:
Code:
shpchp 0000:00:01.0: Cannot reserve MMIO region
Too many connections
[code]...
I am willing to boot up in a text mode, and then start X windows when I want to.I found the procedure Ubuntu used is different from other distribution. Would some one give me some hint?
View 5 Replies View Related
