Fedora Networking :: No Network After Latest F13 Update?

Jun 1, 2010

I updated this morning to the latest bugfixes for F13. For some reason, networking has become un-available after the required re-start. I am using a fixed IP. Tried to add eth0 DHCP, which initially worked, but became unavailable after a few minutes as well. I suspect there may be an issue with the card's MAC address which may or may not be detected correctly.. Has Networking been updated somehow in this bugfix release?

View 2 Replies


ADVERTISEMENT

Fedora :: Latest Update On F15 Screwed Up Network Manager

Jun 25, 2011

The latest update totally screwed up my system on KDE.The KDE network manager says "activating network", "networking system disabled", "connection failed".The icon shows 3/4 progress completed and is stuck there. Any attempt to change connection manually leads to plasma-desktop crash. I know this is only update related because I have messed with system earlier and thought that the network failure could be my fault, so I reinstalled the system and ran only update command, after the reboot the system was again in the fubar state. This is really frustrating. Just feels like really poor update testing. I have Fedora installed on three different systems however, I won't update them until the problem is fixed.

View 10 Replies View Related

Fedora Networking :: Unable To Use Wireless After Latest Update?

Oct 30, 2010

On my ageing laptop with Intel IPW3945 wireless adapter which has always worked extremely well.... Fedora 13 with the latest NetworkManager. Seems that wireless speed has slowed to a crawl.

Code:

[glenn@leonardo ~>$ rpm -qa | grep NetworkManager
NetworkManager-vpnc-0.8.1-1.fc13.i686
NetworkManager-pptp-0.8.1-1.fc13.i686

[code]....

View 6 Replies View Related

Ubuntu Networking :: Wireless Not Working After Installing Latest Update From Update Manager?

Sep 30, 2010

As the title says i updated my system which then needed a reboot. I also installed Mixxx djing software to try it out. So i thought id just restart the system. Usually when i boot into my desktop wireless automatically can connect to my router but not this time, wired only for now... i know theres tons of wireless issue threads but some more experienced users will be able to get straight to the point and run through some diagnostics with me.

View 1 Replies View Related

OpenSUSE Network :: Update Firefox To Latest Version From A Repository?

Jun 18, 2010

Is there any way to update firefox to the latest stable version, like 3.6.x through the repos on OpenSUSE 11.2?
And will it cause any problems if it can be done?

View 2 Replies View Related

OpenSUSE Network :: Latest Kernel Update Killed IPhone Tether?

Nov 23, 2010

I recently updated my kernel and now can no longer tether my iphone to my openSUSE11.3(x64) laptop. Before the update I could tether.Same machine dual boots to Win7-64bit and can tether just fine.I re-installed the libimobile packages, but my linux no longer recognizes the iphone as a network device.t DOES pop-up some boxes asking if I want to play the media, or view the photos on the iPhone - so that part is working

View 1 Replies View Related

Ubuntu Networking :: No Wireless After Latest Update?

Jan 9, 2010

Creating a new thread for the specific chipset. Laptop is an Acer 5534 with the Atheros chipset. Normally uses the Ath9k driver. To get it to work originally I had to download, compile and install the latest compat_wireless drivers. See post here: {URL] I did the update that came through today and after the reboot there was no wireless internet. It alternates between reboots between having no wireless networks at all detected to never connection to the [AUTO] network previously defined. To fix the problem, I downloaded the latest compat_wireless, compat-wireless-2009-12-11.tar.bz2, and followed the same procedure. I did not do a make clean. To solve the problem temporarily, I edited the grub config and set default to 2 instead of 0 (1 would be 0 in recovery mode).

View 1 Replies View Related

Ubuntu Networking :: Lost Wifi After Latest Update?

Feb 1, 2010

i have a acer aspire one (zg5) with a 2 week old installation of unr. shortly but not immediately following my last update my wifi no longer functions. when i go to the network connections tab in my toolbar it does not list available wifi networks. does not apparently recognize wifi capability at all. but the wifi worked right off the rip on new install.

View 3 Replies View Related

Ubuntu Networking :: Wicd Stopped Working On 9.10 After The Latest Update?

Apr 18, 2010

I have a Lenovo IdeaPad s10 which worked flawlessly with wired, I could never get it to so much as search for a wireless network, so I gave up on it long ago.

I'm using UNR 9.10 on it and today, after updating Wicd Network Manager stopped working making it impossible for me to go online with the netbook even when using a wired connection.

I restarted the computer after the update and once UNR booted up wicd wanted root access to use my computer's network cards, I entered my password, this never happened before but whatever, unfortunately after I entered my password wicd didn't show up in the tray and sure enough there was no internet connection whatsoever.

I tried running wicd manually, UNR says opening, but nothing comes up, no tray icon no nothing.

View 3 Replies View Related

Fedora :: Latest Update Prevents F11 Boot

Aug 7, 2009

It seems today's kernel update has given a few people some difficulty - but my symptoms seem pretty unique.

* I go through GRUB normally. I 'esc' out of plymouth, and watch my services start. I get message 'mdadm: No arrays found in config file'. Don't remember seeing this before, don't have any RAID devices.

* Next, my file-system gets re-mounted in read-write mode (don't know if this is normal or not). Then, my services begin to start-up. My last service is 'crond'. All services start normally. When it gets to 'crond' the [OK] status is never reported. Visually, the screen flickers a few times, stops, then nothing happens. I can type characters though, and they do show up.

* If I then shutdown my computer by pressing the power button, the shutdown procedure begins. 'crond' shuts down successfully (indicating it started just fine), and the computer goes down normally.

* I don't believe this is an NVIDIA issue. I rescue-moded and changed my XORG.conf to the basic VESA driver to eliminate this possibility.

* Worst of all -- No older kernels work now either. They behave in the same way. When I try to boot to other run-levels, no luck either. This tempts me to think the problem might be file-system related and the re-generation of grub.conf threw something off?

View 5 Replies View Related

Fedora :: X And Nvida Fails After Latest Update?

Feb 20, 2010

found this in my boot log nvidia.ko for kernel 2.6.31.12-174.2.22.fc12.x86_64 was not found. and the driver is disabled and X is not working correctly. I tried removing the driver "yum remove kmod-nvidia "

then re-installing and rebooting. same issue I went to the fusion site and followed there install guide again same issue. made sure the free driver is blacklisted in grub.conf kernel lines

View 2 Replies View Related

Fedora :: Firefox 4 Bookmarks Gone After Latest Update?

Sep 3, 2010

I updated Firefox 4 beta to the latest version, and now all my bookmarks are gone. Thanks to x-marks and other means I have backups, but I'm not able to restore them to the updated browser.

View 5 Replies View Related

Fedora :: Error - Latest YUM UPDATE Fails

Sep 23, 2010

sudo yum update
Loaded plugins: fastestmirror, presto, refresh-packagekit
Loading mirror speeds from cached hostfile
* fedora: ftp.linux.org.tr
* livna: rpm.livna.org

[code].....

View 4 Replies View Related

Fedora :: F14 And Latest Open Office Update?

Nov 20, 2010

Just last week I upgraded to F14. Just today I did the latest yum upgrade, and it included an update on Open Office. (1) I now have Open Office 3.3.0 OOO330m14 (Build:9542). According to the OO Web site, version 3.3.0 is still beta!!! 3.2.1 is still the stable release for download. What is Fedora doing? But that's just a general question; here are some specifics. Printing is virtually broken.

(2) Just opening the File -> Print window takes almost 5 seconds. The blue bar along the bottom of the window shoots across 8 times!! I'm hoping this is not the price paid for the new feature of having an unreadable copy of page 1 appear on the left side of the "Print" window!

(3) The "Properties" button is definitely broken. Click it and select the "Device" tab. I set "Printer Quality" to "Draft Grayscale." Then suppose I print 5 pages. Then I want to print the next 5 pages. The Print Quality is back to Normal! And that's without even closing the document, much less closing OO. Closing OO should save the printer settings for a document. But printing two times in a row without closing the document should definitely preserve the settings I make. It doesn't.

(4) Under System -> Administration -> Printing, I set the print quality for the printer to Draft. That also is completely ignored by OO.

(5) In OO Tool -> Options -> Load/Save I have checked "Load printer settings with the document." That should surely imply that when you save a document, the printer settings are saved with it. They either are not or they are not loaded or they are ignored.

(6) When I select the page numbers to print, that is so slow, the numbers don't even appear the instant I type them. That blue bar across the bottom of the window keeps shooting across until all the numbers finally appear.

(7) Under System -> Administration -> Printing there are two driver choices for HP Officejet 5600: hpijs and hpcups. Neither makes any difference for this behavior.

(8) I have several printers. Not even the printer I selected for doing the printing is preserved from one set of 5 pages to the next.

Who has ruined everything? Fedora or Open Office? On a more practical level, any ideas? Am I missing something? I've used OO with Fedora for years. None of this ever happened before. I NEVER had to select the printer and reset printer quality EVERY TIME I printed without closing a document. Plus, for any new document, the printer quality options in OO would be set to what I specified in System -> Administration -> Printing.

View 3 Replies View Related

Fedora :: Streamtuner2 Installed With Latest Update?

Nov 23, 2010

Update last night brought in streamtuner2 and it seems to be working fine so far.

View 2 Replies View Related

Fedora :: 14 Unbootable After Latest Kernel Update?

May 11, 2011

I have a Macbook Pro 5,5. I had Fedora 14 installed on it, updated to the latest version. I updated the kernel, and performed an update. Now, every time my system starts, it loads up the startup fedora bar, and it gets stuck at the bar being loaded 100%.I press ESC to see what is going on behind the scenes, and I notice that the problem is that atd cannot start up.

View 2 Replies View Related

Fedora :: Compiz Broken After Latest Update

Sep 1, 2011

I've just installed 100+meg of updates and rebooted only to find that when I login the desktop fails to boot. Opening a root-console, I killed Compiz which dropped me back to the login screen where I logged-in again with the desktop starting successfully. From there I disabled Compiz and have no problem starting the desktop now. But that's not really a solution.Even stranger, if I now try logging in with and older kernel version and with Compiz off - if I try enabling Compix now, the desktop just freezes - it also fails to complete loading the desktop. So both the current-kernel/Compiz seem to be linked to the problem in some way!Has anyone else experienced this, and is there a solution? I miss my desktop-effects!

View 2 Replies View Related

Ubuntu Networking :: Running 9.10 (i386) With Latest Patches From Update Manager

Jan 21, 2010

I'm having problems installing Cowpatty

running make produces

cc -pipe -Wall -DOPENSSL -O2 -g3 -ggdb -c -o md5.o md5.c
md5.c:20:25: error: openssl/md5.h: No such file or directory
md5.c: In function md5_mac:
md5.c:28: error: MD5_CTX undeclared (first use in this function)
md5.c:28: error: (Each undeclared identifier is reported only once
md5.c:28: error: for each function it appears in.)

[Code].....

Running Ubuntu 9.10 (i386) with latest patches from update manager. If I try using the 4.2 archive I get the same result.

I have similar problems with aircrack-ng suite, but I'll leave that until later!

View 5 Replies View Related

Fedora :: Latest Chromium Update Breaks Flash V10.0.42.34

Dec 24, 2009

I installed Chromium via a repo generously maintained by Tom "Spot" Callaway. Since it's his repo I thought I'd contact him, but I don't really know how - so I'm brining my issue to the forum to see if anyone has a possible solution.I've been using Tom's Chromium fine for the past couple months. After a "yum update", Flash no longer works in Chromium. It works in Firefox. If I try to play any Flash videos it's just a blank box.

View 3 Replies View Related

Fedora :: Latest Udev Update Killed System?

Mar 24, 2010

I ran update on my ASUS N51Vf laptop yesterday and among the updates there was one for udev. After installing it udev refuses to start at all saying: "iTCO_wdt: unexpected close, not stopping watchdog". Then I get to login but not for long: after several seconds either system reboots instantly or it hangs shutting down display. Is there any way to rollback udev update somehow considering I can't even login into system?

View 5 Replies View Related

Fedora :: Wine Fonts Scrambled Since Latest Update

Jul 29, 2010

I am using wine for a couple of programs, such as spotify and winscp. These used to work great, untill the latest wine update last week. Suddenly, the fonts are scrambled and all wine programs became unusable. I tried to reinstall my programs and to reinstall wine, but to no avail.
Here's a screenshot of spotify and wordpad:
My installed wine version is 1.2.0-1.fc12 on Fedora Core 12.

View 3 Replies View Related

Red Hat / Fedora :: Boot Failure After Latest Kernel Update (12)?

Mar 14, 2010

Dual Boot: Fedora 12 and XP Dell 505I've had trouble with the latest kernel update.I updated a bunch of packages recently (including Xorg and kernel), and noticed a severe flickering after the update on my center monitor (Samsung T260 - the laptop display did not exhibit the flickering behavior). I backed out all the changes and started updating package by package. After I updated the kernel (again) I rebooted and here's where the fun part is -

I no longer get anything, except the cursor. No grub menu, no grub prompt. I rebooted and ran the rescue disk and followed the procedurery and point grub at the right boot partition - see here. However (obviously or I wouldn't be posting) that failed to work. I still get a blinking cursor and dead system on boot up.

View 9 Replies View Related

Fedora :: Latest Update Will Not Boot - Remove Version 2.6.30.5-43 From The System

Sep 11, 2009

I have fedora versions

2.6.30.5-43.fc11.x68_64
2.6.29.6-217.2
2.6.29.4-167

loaded on my system. Version 2.6.30.5-43 hangs after the progress bar completes with messges labeled r8169 about the ehternet link status. Version 2.6.29.6-2317.2 boots just fine. How do I remove version 2.6.30.5-43 from the system?

View 9 Replies View Related

Fedora :: Update Bleachbit From The Program Website, Latest Version

Oct 13, 2009

I want to update Bleachbit from the program website, latest version. But get the following ( The name org.freedesktop.PackageKit was not provided by any .service files ) this is good from a security standpoint. But this decision, I would personally take.

View 14 Replies View Related

Fedora :: Solution: Browsers Constantly Crashing After Latest Update?

Jun 13, 2011

I ran an update last night just before I went to bed and shutdown my laptop.This morning, I turned on the computer and clicked on a link in an email. Firefox started but crashed almost immediatly. The same happened with Epiphany and Chrome. The only working browser I had left, was Opera.I started Firefox from the terminal, and saw this:

Code:
$ firefox
GLib-GIO-ERROR **: Settings schema 'apps.gecko-mediaplayer.preferences' is not installed

[code]...

View 2 Replies View Related

Fedora :: Nvidia Driver Locks Computer Up On Startup After Latest Kernel Update?

Oct 18, 2009

I seem unable to get an nvidia driver working properly after upgrading to the latest kernel with Fedora 11.Here is my laptop and its specs: http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN[URL]I've tried both the kmod and akmod unsuccessfully. Everytime it gives me a black screen on boot, I can fix the problem by popping in the LiveCD, and changing the xorg.conf file back to the backup.Here are the errors/warnings from my boot.log file:

Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Checking for module nvidia.ko: [60G[[0;31mFAILED[0;39m]

[code].....

View 6 Replies View Related

Fedora Networking :: Wireless Network Doesn't Work After Kernel Update (Broadcom) / Sort It?

Aug 23, 2009

I wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.

Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux

View 2 Replies View Related

Ubuntu :: Update The Latest From Update Manager?

Sep 25, 2010

When I try to update the latest from Update Manager I get this message:

Please insert the disk labeled: Ubuntu 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.1) in drive /cdrom/

I'm running 9.10. I don't know why I'm getting this message, does anyone here know why this is happening?

View 3 Replies View Related

Fedora Networking :: Latest NetworkManager Fails To Start

Mar 25, 2009

I just updated my Fedora 10 installation with the latest NetworkManager (NetworkManager-0.7.0.99-4.git20090324.fc10.i386) and now my NetworkManager fails to start. The output in the /var/log/messages is

[code]...

View 3 Replies View Related

Networking :: Channel Bonding Or Aggregation On Latest Fedora Release 14?

Nov 11, 2010

On my previous release *cough* if inenslave was needed, bonding instructions didn't work through aggregation did.

cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto bond0
iface bond0 inet static
address 192.168.1.149
netmask 255.255.255.0
gateway 192.168.1.1
dns-nameservers 127.0.0.1
broadcast 192.128.1.255
post-up ifenslave bond0 eth0 eth1
pre-down ifenslave -d bond0 eth0 eth1

#auto wlan0
#iface wlan0 inet dhcp
#netmask 255.255.255.0
#wpa-conf /etc/wpa_supplicant.conf

For some reason the unmentioned former disto, I could not get wireless networking under this configuration and a simple wlan0 interface, in case either cable were to sever it would retain a wireless. The bonding was done for speed, and I believe I can't get faster than mode=4.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved