Ubuntu Networking :: Can't Locate Ndiswrapper Query
Sep 25, 2010
I am trying to install windows wireless drivers using ndiswrapper to have better connectivity around my house(I can only currently get online in certain rooms, very restricted). I have ndiswrapper installed OK, but I am a bit lost on the step where I have to browse to my windows wireless driver(a .inf file I believe), my question is how do I know where this is? I can't seem to locate it at all. I'm running on windows vista.
View 6 Replies
ADVERTISEMENT
Jan 28, 2011
i've patched the source files to be installed on f14 and finally got a succesfull install, ndiswrapper -l comes back with driver installed and presentwhen i run modprobe ndiswrapper i get "FATAL: Module ndiswrapper not found" after many hours of google searching and reading various threads i cannont seem to find a solution to this apart from manualy coping the ndiswrapper.ko file but when i use that solution modprobe starts ndiswrapper but there is no wlan0 present in iwconfig.now for some reason even wheni move the ndiswrapper.ko file manually it still is giving me that error. this worked earlier as i mentioned but then i reinstalled ndiswrapper hoping something went wrong but still got the same error so i tried that same fix and i'm still getting that error. i can't figure out what i migt've done differently earlier but i'm not having any luck.
View 1 Replies
View Related
Dec 18, 2010
I have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing
ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper
I have this error:
FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted
View 4 Replies
View Related
Jan 7, 2010
I'm currently using Ndiswrapper for my wireless usb card that uses the RTL8187B Chipset on Ubuntu 8.04. To get myself to connect I have to run "sudo modprobe ndiswrapper" everytime. Is there a way I can connect automatically?
View 9 Replies
View Related
Jan 9, 2010
I have Ubuntu 9.10. My USB WG111v3 Wireless Card uses the rtl8187 driver. This driver is buggy. I would like to use Ndiswrapper instead. How to make it so Ubuntu doesn't load the rtl8187 driver but Ndiswrapper instead?
View 2 Replies
View Related
Sep 18, 2010
So after a quick look around the forums, I haven't seen anything on removing ndiswrapper. What I have done is removed ndiswrapper via synaptic. Now in order to start my wireless card I have to issue:
rmmod ndiswrapper
modprobe ath9k
ifconfig wlan0 up
Basically this is a pain. Does anyone know how to get rid of ndiswrapper completely and set things up to use ath9k automatically?
View 1 Replies
View Related
Jun 18, 2011
I recently installed Ubuntu 11.04 to run a Minecraft Server. Now against better judgement and seeing that it is only for 7 people, I decided to use a wireless usb card to connect to the internet. Well, I was told that I was going to have to install ndiswrapper. I downloaded it on my Mac and used a USB drive to transfer it to my desktop. I then double clicked and extracted. I then did this in the terminal:
Code:
To run a command as administrator (user "root"), use "sudo <command>". See "man sudo_root" for details.
[Code]...
View 2 Replies
View Related
Jan 7, 2010
I am writing an application using libnetfilter_queue that should perform the following function- Receives packets from NFQUEUE- Apply a decryption algorithm to packets- Issue an ACCEPT verdict for decrypted packetsThese packets are destined to another box behind the firewall running the above mentioned application.Based on Fig 14-1 from the link belowI intend on siphoning out network packets at the PREROUTING chain of the Mangle table by usingiptables -t mangle -A PREROUTING -i eth0 -p 1234 -j NFQUEUE1) I would like to know if the PREROUTING chain in the mangle table is an appropriate place to pick off the encrypted packets ?2) Once the ACCEPT verdict is issued will the modified packets resume processing along the PREROUTING chain of the mangle table ?3) Is there a well documented reference for API's that i will need to use while developing this application ?
View 1 Replies
View Related
Jan 2, 2010
My wireless card (an Atheros AR928x) was not performing very well. At the suggestion of a friend I tried to use NDISWrapper (using the ndisgtk GUI interface) to see if a Windows driver would work better. I found the XP drivers online, tried several versions and, after none worked, I decided that I might as well settle with the crappy quality of the Linux driver and let it go. Sadly, that may not be possible.
I removed the drivers (again via ndisgtk) and now the laptop can't use the card at all. It won't detect any networks (even when just five feet from the router) and I'm not sure what's causing this. I've tried rebooting and rebooting into an older kernel. I checked lspci and it still recognizes the card.
Any idea what's up and how I could fix it?
View 8 Replies
View Related
Mar 21, 2010
I have tried to get ndiswrapper to work on an ubuntu 9.04 32 bit system but have yet to succeed. After installing the windows driver, the usb wireless network adapter is recognized but will never connect to the internet. I have disabled the driver included with jaunty. Now what makes this strange (at least to me) is that ndiswrapper works perfectly with ubuntu 9.04 64 bit. It could very well be something that I am not doing in the 32 bit system (but I don't know what that might be).
I have tried ndiswrapper with several other distros with the same result. So, I don't think it is specifically related to ubuntu however, since ubuntu is what I am using, I am posting in this forum hoping that someone might be able to help me. I have several 32 bit machines I would like to set up but cannot until I get this resolved. I have also tried downloading and compiling a native driver with no success either. Anyway, here is my setup:
PC with AMD64 dual core processors running at 2Ghz and 3 GB ram.
Belkin N150 Enhanced Wireless Router
Belkin N150 Enhanced Wireless USB Network Adapter
And an aside: I am using WICD network manager and would like to know what the tray icon means when it says it is connected at say 54%. My question is, 54% of what? In windows this info is given in Mbps which is more meaningful.
View 3 Replies
View Related
Apr 20, 2010
Using karmic on acer aspire 5332.Wifi was working from fresh install but would drop out often and sometimes freeze laptop resulting in hard reset.Installed Ndiswrapper to try windows wireless drivers unfortunately i can't get them to work. How can i revert back to original supplied drivers?
View 2 Replies
View Related
Jun 6, 2010
I had been having problems with my Asus wireless card connecting to my router. Turns out, using ndiswrapper and the XP driver solved the issue. Based on my title of the thread, the driver worked, I turned off computer at night, next day, I can't seem to start the wireless driver again. How would I go about doing this? I am running Ubuntu 10.04, Asus PCE N13 wireless card.
View 3 Replies
View Related
Jun 23, 2010
cant continue when i install or delete ndiswrapper I got this message:
Errors were encountered while processing:
ndiswrapper-dkms
Setting up ndiswrapper-dkms (1.56-1) ...
Removing old ndiswrapper-1.56 DKMS files..
Deleting module version: 1.56
completely from the DKMS tree.
[Code]...
View 1 Replies
View Related
Jan 31, 2011
Making wifi work with ndiswrapper disabled usb automount. This happened on several ubuntu versions, including 10.10.
After following the directions given in this post [URL] usb automounting stopped working.
I fixed it this way:
Code:
sudo gedit /etc/modules
Added these lines to the file:
Code:
usb_storage
usbhid
Save and exit, worked after reboot or restarting network.
usb automount troubles could also be related to legacy floppy settings in BIOS, see
[URL]
View 1 Replies
View Related
Mar 8, 2011
Ubunutu linux and i need a driver for my wireless usb adapter (WNDA3100) but when i try to download ndiswrapper i cant find it with Software Center.
View 9 Replies
View Related
Jun 11, 2011
I removed my b43xx driver and installed ndiswrapper using this guide. It worked fine, but after a reboot wlan0 was gone:
Code:
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
It's installed:
Code:
sudo ndiswrapper -l
bcmwl5a : driver installed
device (14E4:4318) present (alternate driver: ssb)
and loaded:
Code:
lsmod | grep ndiswrapper
ndiswrapper 192828 0
View 4 Replies
View Related
Jun 16, 2010
I'm trying to setup a linux box to act as just a DNS server. Its something I'd like to use just for WAN type requests and leave other domain related things to the Server running WIndows.At this point on my Linux box, I can run queries and nslookups from it. I can not however, from a Windows box, run a NSLOOKUP command from the Linux box which is telling me to check the permissions from Linux to enable that for the clients. It's enabled.From a C: I type in nslookup - *ip of Linux box* and it tells me -- Can't find server name for address.
View 4 Replies
View Related
Jan 6, 2009
I am trying to connect to my WEP enabled wireless network. I have a pci wireless card with chipset id 10ec:8190, and installed the driver (net8190p.inf) with ndiswrapper on Ubuntu Linux 8.10. I am able to connect when I disable WEP, so I'm sure that the driver is installed correctly and is working. I am connected now from XP with WEP enabled. How to get my Ubuntu distro connected here?
View 1 Replies
View Related
Jan 28, 2010
I followed the internet threat to install ndiswrapper
1. downloaded ndiswrapper.tar & untar it
2. type: make KBUILD=/usr/src/kernels/2.6.18-164.11.1.el5-x86_64/
it prompted me:
[root@circuit ndiswrapper-1.55]# make KBUILD=/usr/src/kernels/2.6.18-164.11.1.el5-x86_64/
make -C driver
make[1]: Entering directory `/usr/src/ndiswrapper-1.55/driver'
[Code].....
View 14 Replies
View Related
Mar 25, 2010
I've just plugged my old ubuntu 8.04 drive which used to run on an amd dual core 64 bit machine onto into my new intel duo core 64-Bit box. uname -a gives:Linux aegis 2.6.24-22-generic #1 SMP mon Nov 24 19:35:06 UTC 2008 X86_64 Gnu/Linux. what i'm aiming to do is install the netgear wg311v3 wireless card drivers using ndiswrapper. The ubuntu box is currently offline and i've gone to URL...
my question is can I download and safely install ndiswrapper-utils-1.9_1.54-2ubuntu1_amd64.deb or is there an intel specific package that I should be looking for?
View 1 Replies
View Related
Apr 4, 2010
My current situation is that the command "sudo modprobe ndiswrapper" is not responding, nothing happens. I am using [URL] as my guide and the "sudo modprobe ndiswrapper" is my next step. Here is some general information that you might ask for:
I received ndiswrapper utilities from "Synaptic Package Manager"
I was using jaunty jackelop before hand and the instructions worked perfectly but I decided to update to Karmic Koala 9.10 (I first installed the cloud enterprise version and realized that was way over my head).
View 9 Replies
View Related
Jun 11, 2010
running 9.04
used ndisgtk to install
ndiswrapper -l yeilds all config file need .config
[code]....
View 1 Replies
View Related
Jul 21, 2010
I've usually never had much of a problem setting up wireless with ndiswrapper and ubuntu. I decided to give KUduntu a try, and for the love of me I cannot install ndiswrapper:
Code:
Reading package lists Done Building dependency tree Reading state information Done Package ndiswrapper-utils is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However, the following packages replace it: ndiswrapper-common E: Package ndiswrapper-utils has no installation candidate I'm pretty sure I've added all the repositories in the sources. What am I doing wrong?
View 3 Replies
View Related
Nov 29, 2010
However it doesn't seem to have fixed my problems, in trying to connect a Micronet usb dongle to my Dell desktop. There are some things I can't run the diagnostics on because when I plug my dongle in the system partially hangs. So it work run lshw -C network for example. And see below for some unhealthy looking outputs from /var/log/messages.
uname -r 2.6.32-26-generic
dmesg | grep ndiswrapper
[ 28.307931] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 31.081961] usbcore: registered new interface driver ndiswrapper
ndiswrapper -l
[Code]...
View 9 Replies
View Related
Dec 10, 2010
I'm trying my to get my 3-year-old Dynex wireless dongle to work in Ubuntu 10.04 (64-bit). Borrowing a similar linksys adapter from another computer running Ubuntu, I was able to install NDISGTK and transfer the same drivers that work in my 64-bit Windows 7 installation into my home folder.
Despite the fact that the dongle does not appear at all using lshw -C Network, ndiswrapper -l indicates that the driver is installed and the device is present. I think I found something interesting, though, when I tried this command:
Code:
jimmy@ubuntu:~$ dmesg | grep -e ndis -e wlan
[ 9.321323] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 10.021542] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMIndicateReceiveNetBufferLists'
[ 10.021549] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateIoWorkItem'
[ 10.021554] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeIoWorkItem'
[Code]...
View 4 Replies
View Related
Jan 9, 2011
I recently installed ndiswrapper and decided to remove it after some kernel panics. The problem is that it overwrote something because I have the compat-wireless-backport driver installed but 'wlan0' doesn't show up anymore. I can see my wireless card when I type 'lsusb'. Any ideas on how to fix?
View 6 Replies
View Related
Apr 6, 2011
I've been using Ubuntu for months now, and love it except for the fact that I'm getting poor speeds while using wireless.
For a little background information: I have a Dell XPS m1530 with a Broadcom BCM4321 wireless card.
I've used the 32-bit version and can't get ndiswrapper to work. It will say invalid driver or something.
When using the 64-bit version, my wireless card's native windows driver will install and it says "Hardware Present", but the wi-fi isn't activated at all.
I've followed the guide found here:
url
and have also tried this person's solution:
url
However, nothing works. Despite the fact that ndiswrapper shows that my driver is installed, the wireless doesn't work.
View 1 Replies
View Related
Aug 10, 2011
I just got a new pc and installed ubuntu 10.04. I have not yet been able to connect wirelessly, but can connect using a hardwire connection.
Code:
kyle@Gracie-pants:~$ ndiswrapper -l
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
[code]...
View 9 Replies
View Related
Jan 4, 2010
I just installed ndiswrapper so I wouldn't have to deal with it. Thing is, I'm not fairly certain my driver is one of the ones ubunutu comes with. I removed ndiswrapper (from the add/remove section, not sure if thats a full uninstall or if I should of used terminal), but my driver is still listed as "ndiswrapper". How do I completely remove that, so my system can use default drivers?
View 1 Replies
View Related
Jan 5, 2010
just loaded 9.10 and trying to install the NDIS wrapper so I can use my USB wirless adaptor. Executed the command
sudo apt-get install ndiswrapper-utils-1.9 as read in one of the forums and received the following error:
E: couldn't find package ndiswrapper-utils-1.9
both the tar version and the unzippedversion are on my desktop but I'm not sure they are installed and I don't know what to install. I've clicked every file in every folder most seem to be instructions not what I know as executables.
View 1 Replies
View Related
