Ubuntu Networking :: Mobile Modem ACM-001 Cannot Detected By Karmic?
Oct 28, 2010
At Saturday, 23rd October 2010 I bought a USB CDMA Modem named AX manufactured by Alltronix and has series
labeled ACM-001. The chipset is Qualcom. It didn't work on My Karmic Koala nor Lucid Lynx. I try to check some condition by writing some command in shell prompt like: tail -f /var/log/messages, lsusb, and modprobe. Here is the results.
result of tail -f /var/log/messages Oct 24 01:37:54 ubuntu kernel: [ 500.464348] usb 2-2: new full speed USB device using uhci_hcd and address 3 Oct 24 01:37:55 ubuntu kernel: [ 500.628220] usb 2-2: configuration #1 chosen from 1 choice Oct 24 01:37:55 ubuntu kernel: [ 500.636305] scsi5 : SCSI emulation for USB Mass Storage devices.
[Code]...
View 4 Replies
ADVERTISEMENT
Oct 17, 2010
i am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies
View Related
Jul 27, 2011
I recently purchased a Spice 3G phone, which can also be used as a Modem. When I plug it into the USB, the phone starts charging.But when I go to Edit Connections--> Mobile Broadband, I cannot see the MODEM there. The Select the device is not highlighted.
LSUSB command shows:
Bus 002 Device 007; ID d324;9003
How do I make it detect so that I can use the phone as Modem.
View 1 Replies
View Related
Oct 14, 2010
last 6 months i was trying to connect internet on Ubuntu 10.04 yet i don't know how to connect internet i used mobile samsung s3310 with aircel
in windows its required hardware supporting software ,i dont know whether it's required for Ubuntu.
i followed instruction on ubuntu forum that is in
network manger->new connection->mobile broadband connection-> modem type (in that box is not enabled so i cant select my device)
->provider country(india) ->choose provider(Aircel)->billing plan(aircel prepaid ->APN is aircelgprs and dialup number is *99***1#)
->finally i did everything and applied but the network manger not showing any mobile broadband connection i am tired
View 3 Replies
View Related
Feb 2, 2011
Ist column shows different customers( like N customers are there) , they require different bandwidht links based on some resolution time will be generated and we have to fix this line with in this resolution time , if not before 1 hr for each customer , this has to genetate some alarm and send the SMS to the particular mobile numbers.everythig is there in the GUI like customer , how much BW they want and what is the time duration , only thing we have to do is ,, linking with the GUi and writing some code to send the generated alarms to the mobile numbers specified.
View 5 Replies
View Related
Jan 18, 2011
I am having a Sony Ericssion Aspen M1i window's mobile which I need to connect as modem to my fedora 13 laptop....
View 11 Replies
View Related
Jun 15, 2010
I was wondering if there was Linux compatible software for Virgin Mobile's USB modem. Officially it's only compatible with Xp, Vista, and Mac OS X.
View 9 Replies
View Related
Jan 12, 2010
My modem is modem SU-6200 cdma 1xEVDO cannot detect. I need driver, but I cannot online in ubuntu 9.10. Check my modem at [URL].
View 2 Replies
View Related
Aug 9, 2010
I am making the switch to Ubuntu and, not being home for almost a month, I am on mobile internet and, I would love to get the ability to send and receive text messages back has I had with the Bell Mobile Connect software. I am at our Lake house and it is my only way to stay in contact with my wife while she is at work as we dont have phone here and, well, cell phone is with the wife
View 2 Replies
View Related
Apr 1, 2010
I am an absolute linux newbie. I've installed 9.10 Karmic Koala on me laptop. Everything works perfectly, and faster than the floppy windows. However, I've come across one little road block. I have a Zte MF633+ Telstra (aka Hellstra) 7.2 usb modem. I have searched the forum and there is no thread on this type of modem.
I have enthusiastically installed usb_modeswitch package found on ubuntu packages website. As the conf file does not have an entry for MF633+ I chose the closest one
[Code]....
View 8 Replies
View Related
Jan 1, 2010
I use ubuntu 9.10 and PCI connected Conexant CX11252 Modem. My GNOME PPP doesn't detects my modem. How can I create a connection? Is there any way to detect my modem and connect ? or ubuntu is fit only for broadband? I think most of the activities in ubuntu depends on internet. I can't do any work. I am losing my money in Internet Cafe. Broadband is even not available in my resident area. Therefore. find a solution to connect internet via my dial up modem!
View 9 Replies
View Related
Jan 4, 2010
I've been trying to get a USB modem stick to work with Karmic.The modem is the ZTE MF626 HSDPA on a Telstra Next G plan.I've followed all the guides and links on the forums:Have deactivated the CD autorun on the USB stick in XP lsusb is showing "Bus 002 Device 003:ID 19d2:0031 ONDA Communication S.p.A." demsg is showing "usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1"This seems stable as well, ie checking periodically it doesn't seem to be disconnecting By the way,the blue light indicating network communication/modem active lights up after the device has been plugged in for a second or so.
When I go through Network Connections and add a new mobile broadband connection, there is nothing listed in the "Create a connection for this mobile broadband device" drop-down on the first configuration screen - all the guides I've read say that it should be listed here, but none say any debug steps if it doesn't.Some other guides for older versions of Ubuntu and earlier versions of the modem reference a "/usr/share/hal/fdi/information/20thirdparty/20-zte-mf626.fdi"file which I don't have.
View 4 Replies
View Related
May 7, 2010
How do I installed a sprint novatel 3g modem? I see sprint under the mobile broadband tab when I create a new connection, and it shows all the right information, but I never can connect.
View 1 Replies
View Related
Feb 18, 2011
I recently installed linux Fedora 14.... how do i have internet connection via my mobile modem...? i conect via usb
View 2 Replies
View Related
May 8, 2010
My D-link DWM-152 HSDPA USB modem is not in the USB_modeswitch supported hardware list and ubuntu was recognized it as USB storage. Any idea how can i switch it to modem mode? I'm using ubuntu lucid.
View 3 Replies
View Related
Aug 29, 2010
I am trying a 3G HSDPA USB Modem inUbuntu 10.04. It detects it as a CD Drive.
When I tried to 'Safely Remove Drive'
I got the following error:
Quote:
Unable to stop drive
Error detaching: helper exited with exit code 1: Detaching device /dev/sr1
USB device: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2)
SYNCHRONIZE CACHE: FAILED: No such file or directory
[Code]....
View 9 Replies
View Related
Apr 19, 2011
I've just installed ubuntu on my father's netbook hp 210 mini 3g with internal 3g modem. At the beginning everything was fine - system automatically detected modem and asked for PIN code. I was very surprised but during download some updates connection broke.. and since then ubuntu doesn't detect modem. I have even reinstalled system
In the broadband connection wizard there is no device detected. I'm on ubuntu 11.04, but on the 10.10 was the same problem.
View 1 Replies
View Related
Jul 13, 2011
I am using Ubuntu 11.04 and a Huawei USB modem to connect to internet. Most of the time when I start computer it is not detected my system. Then I use to reboot and then it gets detected automatically. That means its drivers are now loaded. But I don't know why drivers are not loaded when I start first time.
View 1 Replies
View Related
Mar 8, 2010
I am trying to switch to mobile broadband, Ubuntu 9.10, Huawei E1750 modem, provider Telia Sweden. So far I tried this:
(previous: tried to get started with an Option Icon 550 modem, but could not do it. Ubuntu froze completely, networkmanager refused to see the modem after this. Read somewhere that it is (next to) impossible with Ubuntu, but Huawei is a better chance. Maybe I changed some settings on the way, went and got a Huawei)
-connected modem, nothing happened
-rebooted to Windows Vista, installed modem
-rebooted to Ubuntu networkmanager sees the modem, when I select it, it gives a message 'GSM network, disconnected'
Also: Ububtu sees the usb stick as a folder
View 1 Replies
View Related
Oct 28, 2010
I tried to use multiple mobile broadband modems in ubuntu 10.10 and encounter a bug as follows:
When i plug in a new modem, all the attached modem is automatic go offline ( thus my connection is down), and try to redial back, sometime the redial is successful, sometime it's not.
It was working fine in ubuntu 9.10, plug in a new modem, all attached modems stay connected.
View 4 Replies
View Related
Feb 4, 2011
I have a k3806-z vodafone mobile broadband modem, on ubuntu 10.04. I have added the mobile broadband connection with the network manager wizard. But network manager does not list my connection. I installed usb-modeswitch and usb-modeswitch-data. Still nothing. The disc utility tells me it recognises the modem as a cd drive and a storage device. Evidently usb-modeswitch is not working.
View 11 Replies
View Related
Feb 17, 2011
sometimes our ADSL connection gives up and we are left without internet connection for days until the problem gets fixed. I mean by this problem along the phone line. It affects all machines that connect to the internet through a Netgear WIFI Modem Router. I recently tried an alternative when this happens is to use a USB Huawei Mobile Broadband UMTS connection which works when you insert it in 1 laptop. Is there a way i could get the Netgear WIFI modem router to connect on that usb stick or PC that is online on that usb stick and give access to other machines that will want to connect to the web ?
View 4 Replies
View Related
May 1, 2011
Is there a way to make phone calls and send SMS via mobile broadband 3G modem, i mean an application for the 3G modem which is similar to the one provided for windows by the manufacturer?
View 2 Replies
View Related
Mar 25, 2010
I have a ZTE HSUPA USB Modem Model:MF636 which used to work great and then is not longer detected.
I am using Fedora 12 and was having problems with the modem not been properly detected and filed a bug, which turned not to be a problem of NetworkManager, but an issue with udev.
https://bugzilla.gnome.org/show_bug.cgi?id=603433
I followed instructions to edit /lib/udev/rules.d/61-option-modem-modeswitch.rules and then it worked fine.
Now the modem is again not properly detected. Here is a copy of the results from dmesg code...
I have tried restoring the file that I edited. It was back to the stated previusly reported. I also have tried to run an older kernel. Then I updated to the latest kernel available for Fedora 12. Nothing seems to work.
View 4 Replies
View Related
Oct 22, 2010
I've just installed Zentyal (formally eBox) which is a firewall built on Ubuntu server 10.04. Unfortunately my PCI modem is not automatically detected upon installation and the Zentyal community forum is not very active.Is it possible to get the 4-port Solos Multiport PCI ADSL2+ Modem card from Traverse Technologies working under Zentyal?Apparently the driver is included in kernel versions 2.6.29 and later so I was surprised that it was not automatically detected and working upon installation. It is also available from Zentyal was able to detect their single port card, the Vicking PCIADSL2+ttp://www.traverse.com.au/productvi...product_id=115). This card worked out-the-box - all I had to do was enter my static IP details! Is there any way to achieve the same functionality with the Solos 4 port?
View 1 Replies
View Related
Nov 27, 2010
I've been trying to make my FC13 Dell d620 work with a Huawei 3G usb modem mode E173. I can not switch the device to modem instead of storage with usb_modswitch. This is what I get on lsusb:
[Code].....
View 5 Replies
View Related
Apr 14, 2010
I have a cheap and cheerful netbook (Advent 4213) that I carry around with me running the latest lucid build, it has a built in 3g modem which I like cause I don't have to carry a dongle round with me.... which I continually lose anyhow I also have two data plans, one with Orange UK and the other T-mobile UK. The 3g modem is a HUAWEI Technology.
Both sims work for normal Internet access, I can connect to email servers, access web (both http and https) sites, but when I'm using the T-mobile sim Ubuntu One crashes after about 5 mins after attempting to connect. At first I thought it was a problem with either Ubuntu One itself or the lucid build, so I tried accessing the website interface.... I can login but when I go to view my files (I am assuming you are familiar with Ubuntu One) the page "load" progress bar gets so far and then stops..... it appears to be trying to access ssl.google-analytics.com, but just sits there and eventually times out, I am assuming this timeout is what is causing the Ubuntu One to crash.
Stick the Orange sim back in and everything is OK, go back to the T-mobile sim and it no worky anymore hence the reason I think this is a T-mobile issue and not something wrong with Lucid or Ubuntu One..
View 1 Replies
View Related
Sep 26, 2010
I have mobile broadband which is T-Mobile UK. The modem is a Huawei E160 and on a Ubuntu page, it says that this modem doesn't work at all. That's the only internet source I have so I need to be able to use it. tried to install usb_modeswitch and I'm going to test a different piece of software later. My version of Ubuntu is 10.04.
View 7 Replies
View Related
Jun 12, 2009
I want to use my nokia 6233 as a dial up modem in fedora 10.
View 1 Replies
View Related
Apr 26, 2010
I got Mint 7 running on my Laptop, a Pentium 4 by Dell. It dual boots XP as well. But the mobile broadband which connects by the USB port only works in XP. There are small windows that say it will not run. Errors. How can I get this working in Linux?
View 1 Replies
View Related
