Ubuntu Networking :: ZTE MF633+ HSUPA USB Modem With Karmic?
Apr 1, 2010
I am an absolute linux newbie. I've installed 9.10 Karmic Koala on me laptop. Everything works perfectly, and faster than the floppy windows. However, I've come across one little road block. I have a Zte MF633+ Telstra (aka Hellstra) 7.2 usb modem. I have searched the forum and there is no thread on this type of modem.
I have enthusiastically installed usb_modeswitch package found on ubuntu packages website. As the conf file does not have an entry for MF633+ I chose the closest one
[Code]....
View 8 Replies
ADVERTISEMENT
Oct 28, 2010
At Saturday, 23rd October 2010 I bought a USB CDMA Modem named AX manufactured by Alltronix and has series
labeled ACM-001. The chipset is Qualcom. It didn't work on My Karmic Koala nor Lucid Lynx. I try to check some condition by writing some command in shell prompt like: tail -f /var/log/messages, lsusb, and modprobe. Here is the results.
result of tail -f /var/log/messages Oct 24 01:37:54 ubuntu kernel: [ 500.464348] usb 2-2: new full speed USB device using uhci_hcd and address 3 Oct 24 01:37:55 ubuntu kernel: [ 500.628220] usb 2-2: configuration #1 chosen from 1 choice Oct 24 01:37:55 ubuntu kernel: [ 500.636305] scsi5 : SCSI emulation for USB Mass Storage devices.
[Code]...
View 4 Replies
View Related
Mar 23, 2011
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
View 1 Replies
View Related
Feb 8, 2010
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
View 4 Replies
View Related
Oct 2, 2010
It didn't work. I plugged the cable back in, and it didn't auto-connect, and still says no connection is available after doing the CLI command.
View 2 Replies
View Related
Feb 14, 2010
I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies
View Related
May 3, 2010
I'm try to create a mobile broadband connection using my Huawei E 1550 medem. but in Network manager there is not way to select my modem in the first step ( device selection step ) the drop down menu is locked. what to do ? how to configure my modem with ubuntu ?
View 1 Replies
View Related
Jan 21, 2010
What's the right direction or give me step by step on how to do this?
View 6 Replies
View Related
Jun 10, 2010
with installing Modem Huawei E170. my modem can not connected and suddenly remove from my PC. i am using Ubuntu LTS 10.04.
View 1 Replies
View Related
Feb 16, 2010
I'm trying to setup Tor in Karmic. I went through a few guides already, including [URL]. I added the repos in /etc/apt/sources.list and did "apt-get update". My sticking point is here:
Code:
#apt-get install tor
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code].....
View 4 Replies
View Related
Jan 23, 2010
Following experience setting up QQ account with empathy on a default karmic install 32bit
The server setting for QQ is wrong by default.It should be changed form 2005 to 2008.
View 6 Replies
View Related
Feb 13, 2010
i shut down my ubuntu karmic for a bit. turned it back on after an hour or so and now i have no network connection. i checked all the obvious things like cords etc wife's computer is connected through the same router / modem and no probs here.i even replaced the card in mine.
View 9 Replies
View Related
Mar 2, 2010
Does ubuntu 9.10 Karmic support the AT&T usbconnect 881?I can see it listed under lsusb.It connects when setup under mobile, but will not surf the internet.
View 3 Replies
View Related
Mar 3, 2010
I want to buy a wireless dongle to establish a bridged connection in my home. I mean, does anyone have a wireless dongle which works perfectly for Karmic without ndiswrapper? Some of the information in the Ubuntu help page is outdated.
View 1 Replies
View Related
Jun 10, 2010
when I enter my network password, it fails authentication.Before, it logged onto the network without the prompt, but still took a while to connect after desktop finished loading.
View 3 Replies
View Related
Jan 1, 2010
Everyone who is experiencing this issue please click the link saying it effects you and add a comment so the bug will get the attention it needs. It seams like many people are facing this issue. [URL]
View 1 Replies
View Related
Jan 13, 2010
I recently just installed Ubuntu on this laptop and I have a issue with playing back videos on my LAN server.
Thing is, I've got another computer too where it works flawlessly so I was wondering what causes this on my laptop...
I mount the FTP location and I get access to all the files on the server. On my other computer, I can basically just click any video file and it would act as it would if it was on my HDD already, but when I try to do that on my laptop it will not play the video file at all.
I've tried several media players too, but I usually just use VLC so here is the VLC error:
Code:
And then ask if I want to repair it. However, once I drag the file over to my desktop it works.
So why won't my media players read video files over FTP?
And the whole "Connect to server" is acting a little weird. If I try to use the DNS of the server instead of the local IP I will not get any response. However, using the DNS in other applictions do work.
View 2 Replies
View Related
Feb 2, 2010
I was also having a problem with the Shutdown / Reboot sequence taking ages due to using WiFi, WPA2 and mounting SMB shares. I wasted about 4 hours digging around before I finally realised that the solution involved Upstart. 1. Open a terminal and enter:
Code: sudo gedit /etc/init/network-manager.conf 2. Just below the description line add the following:
Code:
pre-stop script
/etc/init.d/umountnfs.sh
end script
3. Save the script and attempt a restart. I don't know if this will work for everyone, or even what version of Upstart you need for it to work, but it cuts my shutdown time from about 2 mins to about 30 seconds.
Note: This has been working for me about 90% of the time. Occasionally though I see that the script ends prematurely due to the TERM signal and I end up with the 2 minute wait again. I've added the following to the /etc/init/network-manager.conf file:
[Code]...
View 9 Replies
View Related
Feb 26, 2010
I have a HP DC-7600 with the built-in nic [3f:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethe
[Code]...
This was the best optimisation I could get, I did follow the NFS HOWTO. Copying from my PC does not exceed 120Mbits/s (System Monitor). My PC nic does not support jumbo frames. I'm looking for any assistance to improve my network speed. My PC has 4GB RAM. I copied 74GB of average sized files between 4MB to 12MB (uh ... compressed audio) and it took 155 mins using tar:
[Code]...
View 4 Replies
View Related
Mar 1, 2010
I have a WUSB600N v2 and it is working great for me. Here is all you have to do. Go here and download the RT3572USB driver [URL] The file you download is called 2009_1222_RT3572_LinuxSTA_V2[1].3.0.0.tar.bz2 expand it with the command "tar xjf 2009_1222_RT3572_LinuxSTA_V2[1].3.0.0.tar.bz2"
open the file os/linux/config.mk and edit the following lines: Change HAS_WPA_SUPPLICANT=n to HAS_WPA_SUPPLICANT=y and Change HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n to HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y
Next edit the file common/rtusb_dev_id.c and add the USB ID of the card to it. {USB_DEVICE(0x1737,0x0079)}, /* WUSB600Nv2 */
sudo make
sudo make install
reboot and your done.
If you have added the USB device to any other drivers following other threads you will want to either remove that line and recompile those drivers OR black list those drivers. After doing the above this NIC is working great for me in Ubuntu 9.10 and getting N speeds.
View 8 Replies
View Related
Mar 29, 2010
I really need to get a linksys wpc54g version 4 pcmcia card to work....i have never really had a lot of problems with wireless and thit is a friends laptop that he wanted ubuntu on......if i cant get it to work he will go back to windows and i would not like that to happen lol....here is the output of dmesg and ifconfig lspci and lspcmcia..
Code:
thomas@thomas-laptop:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-20-generic (buildd@palmer) (gcc version 4.4.1
[Code]....
View 3 Replies
View Related
Sep 6, 2010
I'm using Ubuntu Lucid Lynx on a MSI Wind U100 Netbook, and most of the time (say 9 times over 10), my computer can't connect to Internet, be it with an ethernet cable or wifi. I have heard of similar problems with Ubuntu Karmic and kernel 2.6.27, but mine is 2.6.32, so I didn't try the solutions I've found across the web, fearing to break more than anything else.
What I can say is that before running Lucid, the netbook was running Hardy, and ethernet used to work fine whereas WiFi absolutely not (but I didn't try too hard to make it work).
View 2 Replies
View Related
Jan 12, 2010
My modem is modem SU-6200 cdma 1xEVDO cannot detect. I need driver, but I cannot online in ubuntu 9.10. Check my modem at [URL].
View 2 Replies
View Related
Jan 29, 2010
I have a dual boot Win XP and Ubuntu 8.04. I use my phone Nokia 7210 Supernova as a USB modem on XP using NokiaPC Suite. I don't know how to do this in Ubuntu.
View 1 Replies
View Related
Feb 19, 2010
I'm using an external Huawei CDMA fixed wireless terminal (phone + dial-up modem). It connects to my PC via a USB port. Actually my PC recognizes it (after driver installation) as "TIUMP Serial Port". I guess the driver is a kind of USB adapter for a serial port.
I can't get it to work in ubuntu 9.10. I ran wvdial (after installing dependencies and wvdial package) and it doesn't recognize my device as a modem. Is there any solution to this problem? Without solving it, I won't be able to go online from ubuntu.
View 1 Replies
View Related
Feb 20, 2010
I'm running Ubuntu 9.10 (Kubuntu) and have a LG Arena (KM900) smartphone which when plugged into the USB socket and I select the iSync option on the phone, the handset is correctly identified as a Mobile Broadband device in Ubuntu network manager. However, I'm having difficulty getting Ubuntu to connect to T-Mobile through the 3G modem. I've referenced [URL] and[URL] and I can not connect. I'm assuming that this is something to do with Mobile Broadband settings I'm using:
APN: general.t-mobile.uk
Username: user
Password: pass
View 1 Replies
View Related
Mar 21, 2010
I have a WiFi modem. Its Chinese(non-brand) modem. I can use this modem in windows Xp easily. Just need to install a software given with this modem. but cann't use it in Linux as using ubuntu 9.10 below is my lsusb report.
Quote:
ubuntu@ubuntu:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
View 1 Replies
View Related
Mar 22, 2010
I moved from Debian to Ubuntu a few months ago, with everything working fine, except my 3G modem (which worked with wvdial and umtsmon in Debian).
The packaging claims that it is a Huawei E160, but lsusb says different: E220 (12d1:1003).
I've followed various instructions from these forums and the wiki, and it seems to be being recognised as a modem (I can set up an O2 prepaid (UK) connection), but it refuses to connect.
View 8 Replies
View Related
Jul 2, 2010
i m able to change mode to usb modem device 9603 Micromax 300 G USB modem.
but still got stuck with
bharat@ubuntu:~$ sudo modprobe usbserial vendor=0x1c9e product=09603
FATAL: Error inserting usbserial (/lib/modules/2.6.31-14-generic/kernel/drivers/usb/serial/usbserial.ko): Invalid argument
View 1 Replies
View Related
Oct 4, 2010
how to run my telstra next g usb modem in ubuntu 10.4?
View 4 Replies
View Related
