Fedora Networking :: WN321G, Link Not Ready?
Nov 6, 2010
I recently got a Tplink TL-WN321G wifi device for my fedora box. It has a Ralink chipset rt2870 in it.After messing it with couple of hours, i got it working with rt2800usb firmware, the LED is blinking on it and the device is listed in available...but its not scanning for available networks..lsusb:
Code:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
View 1 Replies
ADVERTISEMENT
May 22, 2010
I'm trying to connect from my desktop to my router (Networl WGR614v6). It seems to recognise the card, but I can't get a connection. I want to run this machine as a server, which is why I'm using commandline, but I haven't had any luck through the gui either. I've disabled NetworkManager and verified that it's not running. Here's what happens:
Code:
$ lsusb | grep -i wire
Bus 001 Device 003: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapter
[code]....
View 1 Replies
View Related
Nov 1, 2009
The past couple days I've been attempting to use ndiswrapper to connect to my home network wirelessly and have run into a slight problem. I'm able to install ndiswrapper (of course), and install the driver. ndiswrapper -l comes up good, showing the driver is in place for my netgear wg311v3 card.
modprobe ndiswrapper I am able to get to work without errors, except, when i type ndiswrapper -ma it writes another file to /etc/modeprobe.d/ndiswrapper causing the deprecation error.
The card scans for networks, and I'm able type in my encryption key.
However it doesn't connect. | grep comes up with the error that the wlan0 link is not ready.
I think I've also been able to determine that the configuration I've put in to the card through the network manager is not actually configured.
Anyone know how I could possibly connect with the card.. It seems it should be able to work. alias wlano is also in place.
View 7 Replies
View Related
Aug 28, 2010
i have not mastered the finer art of installing drivers. I am trying to install a tp-link wireless adapter tl-wn321g which are green lighted but since i don't know how to install the driver.
View 6 Replies
View Related
Jan 21, 2010
I just buy a usb wifi and I am trying installing it. TP-LINK TL-WN321Gsusb
Bus 004 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapterhere I can see that is need driver rt73. I have it in synaptic.I installed these package: firmware-ralink, rt73-common, rt73-module-2.6.26-2-686My kernel is:Linux Miros-main 2.6.26-2-686 #1 SMP Wed Nov 4 20:45:37 UTC 2009 i686 GNU/LinuxI have installed wireless-toolsI have Wicd installed.iwconfig iwconfiglo no wireless extensions.eth0 no wireless extensions.
View 4 Replies
View Related
Feb 27, 2011
i have a usebe Wireless TL-WN321G and i search driver for him and how i can install it without connection on the internet.
View 9 Replies
View Related
May 26, 2011
download and instal tp link wn321g wireless adapter for ubuntu
View 1 Replies
View Related
Apr 22, 2010
My installation has stopped detecting my wired network. Another computer connects fine with the same cable to the same access point. As far as I can tell it is simply behaving as if there was no network available from that cable but obviously there is. It was working a couple of hours ago, and I didn't install or uninstall anything, just shut down and booted up again.
LAN is enabled in the BIOS ifconfig does display eth0 ifup eth0 returns "Ignoring unknown interface eth0=eth0" in the output from dmesg:
"ADDRCONF(NETDEV_UP): eth0: link is not ready"
network appears in lshw and is not listed as disabled
View 9 Replies
View Related
Mar 24, 2011
fresh install of 10.1 on an older sony laptop wireless icon is on the toolbar, and my router is listed icon has a red exclamation mark my wireless button on the laptop is set to "on" dmesg | ndis reports "wlan0: link is not ready"
View 4 Replies
View Related
Nov 7, 2010
This morning I installed Fedora 14 on my laptop. During the setup, I was able to configure the wireless connection and use it to install additional software from the FreshRPMs and Livna repos. When the install was completed, I was surprised to find the wireless not working. When I click on the NetworkManager icon at the bottom right corner, I see "Wireless Networks" Under that it says "device not ready" and it is greyed out so it cannot be click on.
Running lspci -vnn returned
07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
Kernel driver in use: ath5k
Kernel modules: ath5k
Running lsmod confirmed that ath5k is in fact loaded.
View 4 Replies
View Related
Jan 25, 2011
I hav googled and tried everything postedoso reinstall fedora 14but still doesnot workI try to install these 3 fileskmod-wl-2.6.35.6-45.fc14.i686-5.60.48.36-2.fc14.1.i686.rpmerr: kmod-wl-2.6.35.6-45.fc14.i686-5.60.48.36-2.fc14.1.i686 requires wl-kmod-common >= 5.60.48.36kmod-wl-5.60.48.36-2.fc14.1.i686.rpmerr:kmod-wl-5.60.48.36-2.fc14.1.i686 requires kmod-wl-2.6.35.6-45.fc14.i686 >= 5.60.48.36-.1broadcom-wl-5.60.48.36-1.fc13.noarch.rpmerr:broadcom-wl
View 3 Replies
View Related
Jan 10, 2010
I have a HP Elitebook 6930 with Intel 5300 wireless card and today I update it from Fedora11 to Fedora 12 and now I cannot connect with my home wireless network. Previously with F11 I connected without problems but now the wireless connection presents a "Device not ready" message. I tried to switch on/off the wireless card but without results. I had to set intel_iommu=off as kernel parameter to complete the boot. Is something related to it?
View 2 Replies
View Related
Apr 26, 2010
I have a problem where I'm using Ubuntu linux to mount a Windows Vista machine's USB drive and access it on the web using Apache. I did have the USB drive plugged into the Linux machine directly and that was working via the web. FollowSymLinks is on in httpd.conf
[Code]....
The mount works and I can see the files (see above) from my regular linux user account. If I make a test file in /mnt and soft link to that, I can see it on the web. So it's just the mount to the vista machine that seems to be a problem. It's supposed to be a simple read-only mount and the apache login should (I think) be able to see the same generic root access permissions.
log from apache: [Mon Apr 26 20:39:42 2010] [error] [client 99.99.99.99] Symbolic link not allowed or link target not accessible: /home/user1/pub_html/Music, referer: https://xx.xx.xx/~user1/music.html
The credentials have a login and password that matches a special read-only account on Vista. I can see the files on the system from Linux, but not via the web. As mentioned above, a different link to the same /mnt area works fine via the web. I've tried several different mount options with no success.
View 3 Replies
View Related
Nov 19, 2009
I want to know ; how to setting D-Link DWM 652 anybody can tell me how to do I have go back to windows again or I should stick to Fedora
View 2 Replies
View Related
Mar 25, 2009
I want to link two servers (nets) 192.168.1.x and 10.0.0.x which use Fedora with firewalls.
View 2 Replies
View Related
May 29, 2010
I have "D-Link DWA-125 Wireless 150 USB Adapter". I can use this wireless adapter on my laptop, i can use it on my desktop as well but only when windows is running, im a newbie to fedora, today is my 2nd day and 3rd night, so pretty exited about it. i have installed fedora 13 on a different hard-disk on my desktop. when the computer is booting, there is an orange light on the adapter glowing, it turns off when the computer reaches the fedora loading screen. If i see fedora's Network Configuration window under the hardware's tab i see the "D-Link DWA-125 Wireless 150 USB Adapter" listed along with my lan card. Now if i go towards the clock on the top right to get the wireless connection working, it shows wireless network disconnected. I have tried creating wireless connection manually by inserting the SSID, macadress, BSSID, ,WPA passkey etc, but still doesnt works. when i try connecting using hidden wireless connection, i receive window for inserting keyring password again and again, stating that the login password does not match. but during all this time, i still havent seen the orange light glowing activity on the external usb adapter. If i restart the computer in windows the adapter/wireless connection works. also have checked the Network service, it seems that the service is up and running. i really require some assisstance on this,
i have noticed this, that if i go under network configuration. the first tab over there, inside devices i cant see my D-Link adapter, but if i switch onto the hardware tab it shows my lan card as well as my D-Link adapter. so does it means that the driver is missing? or any service which is disabled, however at this point of time i can get only using wired connection. please assist me. with this issue, im also downloading the 500 complete update as well for fedora, hoping that it may make it work.
View 14 Replies
View Related
Jan 10, 2011
I have what I thought would be a simple issue: I have a Linux server and a bunch of people with Macs on a small business network.I'm trying to set it up so that using AFP, people can access the Linux server and drag and drop files to our test web development server. In each person's home directory there's a sym link to the /var/www/html directory, so that they can easily plop their test files there.I've got the hard part taken care of: AFP works, the Linux server appears on the network, and the Mac users can connect and log in.However, my sym link doesn't show up as a directory inside the Mac Finder...it shows up as an application. I don't know if this is something as simple as a permissions problem or whether I need to do more configuring to get AFP to play nice.
View 6 Replies
View Related
Nov 16, 2010
I installed Fedora 13 some days back and been facing a weird network problem. on dmesg my NIC is showing Link up and Link down in alternate fashion. Even the lights on the port go on / off. this happens only for half hour once i start my pc, after that its fine.
View 2 Replies
View Related
Jul 29, 2009
I am trying to make a d-link dwl-650+ pcmcia card work through ndiswrapper method following the direction at:[URl]... The first step there is to install the "kmod-ndiswrapper" via yum.
But, how would I just download this package to a usb drive so that I can transfer it to the laptop that needs wireless networking. Is there an option in yum where I can just download the package, not intstall, so that I can save it somewhere?
View 14 Replies
View Related
Jun 7, 2011
I just installed Fedora 15 yesterday and can't get wi-fi to work. When I click 'on' on the Wireless label, it goes back to 'off' immediately. When I open the Network Settings menu and disable Airplane mode, the Wireless connection goes on and then off immediately. I took a look at /var/log/messages and it shows this:
[Code].....
View 5 Replies
View Related
Feb 21, 2011
I'm trying to start a service that depends on networking being started, whenever the computer is rebooted. Is this easily possible from an /etc/init.d script? I have tried creating a script here (conforming to the standards), but I'm really doubtful that it's even running on boot, let alone working. When I test it manually, it works.How can I make a script that runs on boot which runs after networking has been started?
View 2 Replies
View Related
Sep 6, 2010
I've tried to install Linux systems have been failures. Trying to make this work, trying to get on the right wagon, and it's frustrating as all get-out.
Installed netbook remix onto a HP Mini 1000 (1116NR?) and everything seems to be working alright, except no wireless networking. I tried a couple of things and now it shows "device not ready" instead of "disabled", so I figure I'm getting somewhere.
The device is:
Broadcom Corporation BCM4312 802.11b/g (rev 01)
I want in. This is my 3rd try over the years of running Linux and I always hit snags like this that I can't fix because I've never gotten to play with it enough to learn what I'm doing and generally don't have a 2nd computer like I do right now.
View 1 Replies
View Related
Nov 8, 2010
All I want to do is share my internet connection that comes through the eth0 cable to my wlan0 wiki card. Firestarter seems the convenient tool for doing this. BUT it keeps telling me wlan0 not ready. The card is connected correctly and network-manager does see incoming signals.
View 1 Replies
View Related
Nov 2, 2009
my long awaited WUA-1340 D-Link wifi adapter has arrived, and...unfortunately won't work it didn't work "out of the box", so I tried the following (found on the aircrack website)Here's what I did....1. Edit /etc/modprobe.d/blacklist and add blacklist rt73usb as a new line.2. RebootThen,
Code:
wget http://homepages.tu-darmstadt.de/~p_larbig/wlan/rt73-k2wrlz-3.0.3.tar.bz2
tar -xjf rt73-k2wrlz-3.0.3.tar.bz2
[code]....
View 3 Replies
View Related
Jan 27, 2010
I just recently installed ubuntu, my first experience with linux. I don't know if it isn't recognizing my wireless card or if it is another issue, but I am unable to view any wireless networks/connect to any. When I click on the network icon it says "wireless" with Device Not Ready underneath.
View 9 Replies
View Related
May 16, 2010
I just installed Ubuntu 10.04 and I can't seem to get the wireless connection to function. Ubuntu either says that the card is turned off or if I toggle the wireless switch on my keyboard it then says 'device not ready.' I'm using a Dell Wireless 1397 WLAN Mini-Card, and it works fine when I boot in Windows 7.
View 8 Replies
View Related
Jul 23, 2011
I thought I'd give Ubuntu 11.04 (Natty Narwhal??) a try on an old Dell Latitude D600 I had lying around. Install went great. Everything seems to run nice and slick.. except one thing.. the wireless is giving me the old "Device not ready (firmware missing)" So I can only use my lappy on a leash.
It's a pretty common Broadcom NIC... and I've tried running the System / Administration / Additional Drivers and nothing comes up.
It seems to me I need a driver someplace...I don't know where or how to get it installed.
View 9 Replies
View Related
May 18, 2010
I tried all the threads to load and compile the driver for the Belkin wireless-N F5D8053 (Ralink RT2870 chip) I still cannot get it to come up - the wireless status says device not ready. Here is some of the system info relating to the adapter:
terry@terry-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:14:bf:53:02:8f
inet6 addr: fe80::214:bfff:fe53:28f/64 Scope:Link
[code]....
View 8 Replies
View Related
Dec 23, 2010
i have recently installed Ubuntu 10.10 on my computer, which is HP 4710s ProBook.I've installed it with wubi and everything seem to be working just fine, except for my wireless.It is showing me: device not ready(firmware missing).
View 1 Replies
View Related
Mar 3, 2009
I have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.
[Code]....
View 5 Replies
View Related
