Just wanted to ask what is the easiest way to get the wistron_btns module to run at startup. I have read a bit about it in some other forums, but I wanted to hear it on the SUSE forums to be certain I get it right the first time.
View 1 Replies
I'm needing to have the acer-wmi module running at startup for my wireless card. In ubuntu this is located at /etc/modules and I was wondering where the same file is within Fedora
View 2 Replies View RelatedI want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedI updated to the latest kernel from Suse 11.2 repo. My wireless device won't load firmwares, ndiswrapper won't be a module anymore etc. :
Code:
inux-kqzq:/home/olivier/T l chargement/fwextract3 # modprobe ndiswrapper
FATAL: Module ndiswrapper not found.
linux-kqzq:/home/olivier/T l chargement/fwextract3 # find /usr -name ndiswrapper
/usr/sbin/ndiswrapper
^C
linux-kqzq:/home/olivier/T l chargement/fwextract3 # find /lib -name ndiswrapper*
/lib/modules/2.6.31.5-0.1-desktop/updates/ndiswrapper.ko
linux-kqzq:/home/olivier/T l chargement/fwextract3 # uname -r
2.6.31.12-0.2-desktop
2.6.31.12-0.2-desktop is uname
and 2.6.31.5-0.1-desktop is the module
I have an Acer 1551-4755 notebook with AR5B93 wireless chipset. ath9k is loaded and my card is detected as Atheros AR928X PCI-Express wireless network adapter. However, the ath9k driver is only allowing me to connect at 802.11g speed in spite of the fact that my WRT310N loaded with DD-WRT is in mixed mode. I am able to connect at wireless N speed with my D-Link DWA-130 usb dongle, but this is a rather backward solution. Is there a way to work around this issue, ie an updated ath9k or other madwifi driver? I would hate to resort to ndiswrapper for a natively supported chipset. I am using openSuSE 11.3 for the first time, long time Fedora user.
View 1 Replies View RelatedAfter much tiddling'n'fiddling I finally got my new Linksys WUSB600N v2 working. Contrary to many posts, mine did NOT work with either the standard rt2870sta module, nor the updated version from the driver:wireless repo. Also the rt2870 version from the ralink website didn' t work. After a days worth of Googling I came across this post. The bottom line?
1. Download rt3572 from the Ralink website.
2. Add {USB_DEVICE(0x1737,0x0079)}, /* WUSB600N v2 */ to common/rtusb_dev_id.c
3. Follow README_STA
I did not install firmware packages. And be sure the rt2800sta module doesn' t get loaded. (you could just remove it, I suppose.)
On my Lenovo T410 (openSUSE 11.4 KDE - 64bit) I have mobile broadband. Gobi-loader is installed and working properly. However when I try to setup mobile broadband connection the KDE Control Module crashes. Tried many times also after reboots, though KDE Control Module keeps crashing.
View 6 Replies View RelatedUsing tips provided in the "Sticky" posts, I have identified my wireless device -- BCM4322 -- and installed the necessary firmware and drivers. The device appears in Network Manager until system reboot, at which time the "ssd" driver module is loaded instead. After each boot I must execute the following commands to remove ssd and load the Broadcom driver:
rmmod ssb
modprobe lib80211
modprobe wl
The Broadcom README file provides directions to load the correct module automatically, but the commands appear to be incompatible with openSUSE 11.4. I'm happy to provide additional detail if needed
Used to work perfectly. I attempted to install VPN client, result is can't connect to anything. Networks are seen by network manager, nothing happens when click connect. Results below:
Wireless LAN present in Hardware information. Atheros AR242x 802.11abg Wireless PCI Express Adapter (wlan0)
Kernel Driver: ath5k
168c:001c
/var/log/boot.msg
[code]....
Advice is to use output of dmesg command to find problem, but as above I don't get any results for this in terminal.
attempt to ping external site
linux-cfi6:~ # ping -c 66.70.73.150
Usage: ping [-LRUbdfnqrvVaA] [-c count] [-i interval] [-w deadline]
[code]....
my wireless wasn't working because the button to turn it on doesn't work in SUSE.
On 01/11/2011 01:36 PM, lak 726 wrote:
>
> Here it is:
>
> /usr/sbin/rfkill list
[Code].....
My results were good but now how do I add this to start up so I don't have to manually do this every time I boot?
Above adapter can be installed on v10.2 and 11.3 using ndiswrapper:-
1. Copy the 3 driver files from Windows:- like netwpn111.inf, WPN111.sys & ar5523.bin.
(Be carfeul about the exact names, because they have changed over time).
2. sudo ndiswrapper -i netwpn111.inf
3. sudo ndiswrapper -m
4. sudo modprobe ndiswrapper (the adapter should light up at this point and networks will be detected shortly after - see network manager). (Be careful of paths here - e.g. I had to use /sbin/modprobe - so 'whereis' may be necessary to find these commands).
2nd When I reboot, I need to run the modprobe command again. How do I make the module load automatically on boot? Also (and this is minor), can I bypass the KWallet, keyring thing? it seems silly to enter a password for the keyring and then click another password dialog, when I can just as easily enter the password for the network itself.
I'm new to openSUSE and as a matter of fact, to linux too. I've got a Linksys WUSB600N wireless adapter which used to work fine with some live versions of linux that I was testing out before moving onto suse... Each time, upon booting using live CDs, I used to copy the driver I had downloaded from:
SpeedShare - Download rt2870-kernel-2.6.24-nemesis.tar.bz2
Then 'make' and get into the driver's os/linux directory to load the driver using 'insmod rt2870sta.ko' Now, upon doing a 'make' and 'make install', followed by the 'insmod rt2870sta.ko', I get the error saying:
insmod: error inserting 'rt2870sta.ko': -1 Invalid module format
I tried doing 'modprobe -rv rt2870sta' and didn't get any error messages. But while doing 'modprobe -v', this error shows up: insmod /lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko
FATAL: Error inserting rt2870sta (/lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko): Invalid module format
I just reinstalled OpenSUSE 11.3 GENOME on my computer (Compaq Armada E500 w/512 MB RAM, 30GB HD, and Linksys WPG54v2 wireless card). After futzing around for several hours on two different evenings, I got it working all by myself! The only thing is,ow I have to manually connect to my wireless network every time,which gives me a a great sense of accomplishment. I start the computermber having to edit a script somewhere to make it connect automatically on system startup, but I can't remember what it is I'm supposed to edit or how I'm supposed to edit it
View 9 Replies View RelatedI have built 11.2 on several laptops and knetwork manager startup for wireless is not consistent. I can't figure it out. Sometimes the options "Create Network Connection" and "enable wireless" are greyed out. Other times they are fine. What is the secret to getting the options to appear in my window tray all the time? I always select knetwork manager as the default when I do a clean build.
View 3 Replies View RelatedI rebooted my computer and noticed the aoe module didn't loadad to do a modprobe aoe)What's the proper way to have this start at boot time? (rather than something like doing a modprobe aoe in the rc.local
View 1 Replies View RelatedWhere I can load the module snd-mixer-oss at system startup?
View 2 Replies View Relateddownload new driver compiled and installed boot it is not loading. uname=Linux Kev 2.6.35.11-83.fc14.x86_64 #1 SMP Mon Feb 7 07:06:44 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
lsusb=
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
my Conky needed the Coretemp, and a friend of LQ told me to run modprobe, and it works greate! no every time I start my system, I need to run the modprobe to add the module to Kernel. How can I put the coretemp to start every startup? (I think there is somenthing to do with a file on the rc.module at /etc/rc.d/, but I'm afraid to do something stupid...) I want to make the conky running after start of the system. How can I do this?
View 2 Replies View RelatedTrying to install the Suhosin module with the php 5.2.9 c5-testing repo...it won't run with the php 5.2.9 testing build (there isn't an updated suhosin package against the 5.2.9 build)
PHP Warning: PHP Startup: suhosin: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP compiled with module API=20060613, debug=0, thread-safety=0
What's the best way to handle this from an admin best practices standpoint? I want to do everything possible to keep the suhosin module tracked by yum for future updating etc. Is it best to try to find a suhosin rpm that is built for 5.2.9 and install it with yum localinstall? If not, if I build the module myself, what's the best path to keeping yum/rpm in the loop on this install for future updating via yum?
I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:
Failed to load module "fglrx" (module does not exist, 0)
I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?
OK Trying a fresh install of bnome openSuse, and I have certainly screwwed something up again and hope I don't have to reinstall again., arghhhh! Tomboy won't open, even after reinstallation, and below is the error, but first, as well I can't open my .odt file with openoffice writer!
now the error... #tomboy Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory ...and lots more
I have a Toshiba Satellite 505D, and because of ACPI issues I had to compile a custom kernel. [URL] Everything works except the wireless is broken. My network card is a RTL8101E/RTL8102E. The driver is r8169. The new kernel does not load the wireless driver at boot up.At the terminal, I typed sudo modprobe r8169 to load the driver. Then I typed dmesg | grep -i r8169, and I got back the response
bob@bob-desktop:~$ lsmod | grep -i r8169
r8169 39454 0
mii 5237 1 r8169
This, I think, tells me the driver is there. However, when I type iwconfig, I get the response "no wireless connection"
what is name of modules in kernel for wireless and lan driver ?
View 1 Replies View RelatedI was going to buy a TP-link wireless router (802.11b/g/n) but while I was reading the consumer's reviews I saw some people were saying that they couldn't make it work with ubuntu. So, I'm starting wandering if there is somewhere any compatibility list? I mean if for instance TP-link or D-link would work with broadcom's chip. I would like to use my laptop's built-in wireless module which is HP Broadcom corp. BCM4306 802.11b/g. My laptop is a HP Pavilion zv6000.
View 2 Replies View RelatedThis is solved go to page #2 for instructionshis link will help show my netbook wireless situation:http://wontek.com/laptops/laptops/hp...-3025dx-reviewA quick read of the article says I need to compile a module to get the wireless to work... ??? Now I'm lost... can anyone point me in the right direction to compile a module?? and what exactly would that be doing???I believe I need this wireless driver: Ralink 2011 802.11 b/g/n WiFi Adaptercomputer: HP dm 1-3025dxOS: Ubuntu 10.04 Netbook
View 9 Replies View RelatedA little background first: Wireless card: Broadcom BCM4312 Wireless driver used: [URL].... (and slackbuild variation of the same)
GFX card: nVidia geForce 7150m I installed Slackware yesterday, along side my Ubuntu (yes yes, I use Ubuntu lol. I've been using it for about four years, I added Slackware to grub.cfg, using the OS prober, which added four menu entries. The first two caused kernel panic, the third worked, and I don't think I tried the fourth. (I'm pretty sure they were, in this order: generic, generic-smp, huge, and huge-smp). Using huge, I could not modprobe my wireless driver, I would get a "Invalid Module Format" error with wl, and when installing the nVidia drivers (from their site), I would get:
[code]....
I then booted using a menuentry my friend gave me, created my initrd, and everything worked fine, both graphics and wireless (mostly fine). So I upgraded to -current, kernel 2.6.35.10, and I started getting the same errors as before, 'Invalid Module format' and the same thing with the nVidia drivers, although this time, it happens regardless of if I use the generic kernel, or the huge kernel. I've done heaps of Google'ing around, and nothing I found worked.
The rsync module "opensuse-full" which worked well so far seems currently broken. It tries to mirror a huge number of additional stuff (factory?) but fails with "permission denied". Any place where I could report this?Command:
Code:
rsync -rlpt -hi -stats rsync.opensuse.org::opensuse-full /drive/repo
Errors:
[code]....
When I start ubuntu from being turned off, my network manager does not show wireless as an option, only wired (disconnected.)When I open a terminal and type "sudo modprobe rt3090sta" my wireless card becomes available and It works just fine. THe only problem is that I dont want to have to open a terminal to get my wireless to work every time i turn on my computer
View 3 Replies View RelatedMy Slack takes some time to boot. It hangs about 5 secs in a line that reads:
Quote:
/etc/rc.d/rc.M: eth1 information: "MySSID" Then, it polls for a DHCP server on eth1 (I didn't write down the exact message). I noticed that if my router is off, the polling process take quite some time to move on.. I tried to look the rc.M, rc.inet1 and rc.wireless scripts, but I couldn't pin point what to change... I tought of adding an '&' at the end of the command that issues the line I quoted and on the DHCP. The DHCP line I didn't search much, I'll try it later...
I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
View 3 Replies View Related
