I'm needing to have the acer-wmi module running at startup for my wireless card. In ubuntu this is located at /etc/modules and I was wondering where the same file is within Fedora
View 2 Replies
Just wanted to ask what is the easiest way to get the wistron_btns module to run at startup. I have read a bit about it in some other forums, but I wanted to hear it on the SUSE forums to be certain I get it right the first time.
View 1 Replies View RelatedI have a Laptop PC Acer Aspire 1710 and OpenSuse 11.2 installed on it I tried to setup my wifi card but it doesn't workI checked the log system log file.Apparently the driver cannot be loaded :
<6>[ 8.556483] b43-pci-bridge 0000:03:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
<6>[ 8.560204] ssb: Sonics Silicon Backplane found on PCI device 0000:03:03.0
<6>[ 8.581966] cfg80211: Calling CRDA to update world regulatory domain
[code]...
I can't get my wireless card to work. I downloaded a broadcom driver for it and i do believe its the right one, but its not helped. I'm running mint 8. The information on my internal wireless card i got using the terminal is:
lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
[Code]....
Ok, so I upgraded my acer aspire one to the new Ubuntu 10, and at first everything was working fine, except the audio. Now, for some reason, my wireless and ethernet ports have died. I can't get online by either method. I can do ifconfig <device> up and it will show up if i do iwconfig or ifconfig, but the wireless isn't associated with the AP. Currently I'm trying to load some drivers for my atheros card, and we'll see how that works outReally I was wondering, how come the modules don't load at boot time, and how can I fix this? I've been a Linux user for quite sometime, however I've been more of end user
View 1 Replies View RelatedI rebooted my computer and noticed the aoe module didn't loadad to do a modprobe aoe)What's the proper way to have this start at boot time? (rather than something like doing a modprobe aoe in the rc.local
View 1 Replies View RelatedWhere I can load the module snd-mixer-oss at system startup?
View 2 Replies View RelatedI have an Acer Aspire One running Fedora 10.The Aspire One has a built in multi-format memory card reader compatible with SDHC, XD, Memory Stick Pro and MMC cards, however the card reader is only detected during bootup if a card is inserted otherwise the device isn't detected, the relevant drivers aren't loaded and the card reader doesn't work.
In other words if Fedora is booted without a card in the reader and I then want to use the card reader I have to insert a card and reboot in order to use it, after which cards can be inserted & removed and are detected and automounted with no problems.When the card reader is working lsmod shows the following modules are loaded.
[Code]...
If the laptop is booted without a card in the reader none this shows up. I've also tried manually loading the mmc_core, mmc_block, sdhci, memstick & jmb38x_ms modules to see if this kicks the reader into life but it doesn't. Is there a way of forcing the detection of this device during bootup?
So I want to run a Minecraft Server on my computer running Ubuntu 11.04. My goal is to have the server running over my network through one of the virtual terminals without any type of GUI running (to conserve resources). I'm shutting down the ubuntu GUI using the command:
Code: sudo service gdm stop which does a great job, but it also kills my wireless connection.I've tried editing my /etc/network/interfaces, and even uninstalling the gnome network mananger, but nothing seems to work. Can anybody help?
I am very new to Linux and Fedora. I installed newest Fedora to a friend's Acer emachine E725 but the wireless does not work. Originally it had a Moblin linux installed on it but my friend does not speak English so I had to install for her a Hungarian version linux. Fedora seems to be quite user friendly but this wireless problem makes me worry. The wireless was working perfectly on Moblin, the wireless manager showed all available wifi connections and I could chose the desired one and the laptop connected to it. Unfortunately on Fedora and other Linux distributions this does not work. This laptop has a hardware button to switch the wireless On and Off but under Fedora it does not function.
[Code]...
I wonder how can i get download or firmware of my Acer D150 wireless driver. I've been googling it and they provide by .exe ( i think Fedora doesn't open .exe)
View 9 Replies View RelatedI want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedHave a dedicated Fedora 10 laptop so that I can learn everything I need to know. I am using an Acer Aspire 3000 with a fresh copy of Fedora 10 and KDE
The Aspire 3000 has a built in broadcom wireless card, with windows XP you activate the wireless using an LED button on the front of the laptop, but with Fedora I can't seem to do this.
I have found a couple of threads to fix this error on Ubuntu but nothing about fedora. I don't want to change OS as I have just about got this system running like clockwork. I have left the wireless until last as the normal LAN works fine.
Here is the result of my iwconfig:
sometime back when installing FC10, i tried installing ndis wrapper, and later i installed the broadcom driver bcm431 (i think). also i didn't remove the ndis wrapper.
all was fine untill a yesterday when ndis wrapper and some related packages got updated which somehow caused wireless to stop working. lspci showed the hardware present.
to get it to work, i did a yum erase ndis-wrapper, followed by a reboot.
it may not be the most elegent way, but it worked for me.
hardware specs:acer aspire 4720Z (mine has broadcom wireless, others may have atheros)
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
I'm trying to get synergy+ to work on Fedora 12 on start up. I'd like to be able to log into Fedora using my keyboard and mouse through synergy+. I've tried adding the line
Code:synergyc <localipaddress> at the end of the /etc/rc.local file but I still can't use my keyboard and mouse to log in. I've also tried adding the lineCode:su <username> -c "synergyc <localipaddress>" to /etc/rc.local but it still doesn't work. Just to clarify, I do have synergy+ working on Fedora but I need to start it after logging in on each reboot by switching my keyboard over to the other computer.
I have installed Fedora 12 on my laptop and subsequently spent most of the day trying to get the wireless connection to work. Looks like I am not alone with Wireless issues Through searching and reading today I think the problem lies with the fact that the wireless on/off switch is not working. Under Windows, when I press the wifi toggle switch it starts flashing orange. I haven't managed to get it to do anything under Fedora.
# lspci | grep Wireless
06:03.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
# iwconfig
[code]....
I have three problems with my new Acer Aspire one 721 (Amd, ATI) [url]
1) Pymouth doesn't work when booting. I have to use the parameter "nodeset". Desktop effects are working. I have installed Mesa based DRI drivers (experimental).
2) I have to manually "enable wireles" to acess the wlan. It should connect automatically.
3) the laptop doesn't wake up from suspend/hibernate. I have to use brute force to restart. pm-suspend.log
Code:
I'm having some problems getting my screensaver to work automatically.If I start the screensaver config program then it gives me this message: "The XScreenSaver daemon doesn't seem to be running on display ":0.0". Launch it now?" If I click yes then my screensaver works exactly as expected.How can I get the XScreenSaver daemon to start automatically?
View 3 Replies View Relatedmy wireless adapter(WUSB600N) doesn't run when I log in. The driver is loaded on start-up but the green light is not on the adapter. I have to physically disconnect the adapter and plug it back in to get it recognised and it works fine afterwards
View 2 Replies View RelatedI'm trying to start an Oracle Integration server as user "oracle" at system startup and my approach was to place a couple of lines in /etc/rc.localsu oracle/home/oracle/startallSomething is not quite right about this as it seems to leave some processes owned by root.
View 2 Replies View RelatedThere is a script that I want to run as root when the machine boots up(which starts the Redhat Certificate System services). The problem I have is if I put this on rc.local it wont run because I havent logged in as root. Is there a way that I can run this without logging in as root at the machine startup?
View 5 Replies View RelatedI have problem for emerald and compiz in KDE fedora 11. The problems are:
1. Emerald is not running at startup so I have to type emerald --replace every time I login otherwise I get no windows border.
2. The static application switcher in compiz is not running at startup so I have to go to ccsm and disable then reenable it again otherwise when I point my mouse to the edges of my screen it wont do anything.
I'm having problems with the screen going black on startup in 10.10. It appears to go completely off (no backlight or anything). If I press ctri+alt+f1 I get a terminal, then I can ctrl+alt+f7 and the desktop appears. I have tried setting the mode to the correct resolution in xorg.conf and I tried using the vesa driver, but it still doesn't work. My graphics card shows as sis 661/741/760
View 5 Replies View RelatedI have a Dell inspiron 1420 and its set up as a dual boot. Windows/Fedora.I cant get the wireless card to work. I review some previous posts but still cant get it working.
I did a /sbin/lspci
Network controller: Broadcom Corporation BCM4310 USB Controller (rev 01)
I did $rpm -q b43-fwcutter
b43-fwcutter-011-3.fc9.i386
I haven't done Linux since before it had Wireless support, and have never had to tinker with network settings, so I am at a loss.My searching may be weak, but when I tried, I found nothing relevant except to determine some of the things usually asked for in threads of this nature.The symptom is very slow connection when using wireless, but it does fine when I hardwire it. Using Windows 7 on the same system it flows nicely.
View 4 Replies View RelatedI have recently installed ubuntu but the fan on my laptop isnt working,
the file to update the bios is an exe, so I installed wine, but when i used it, it gave me a erroe message about not being able to run a driver and so the exe doesnt run.
I have searched for the forums for how to run exe files but the responses seem a little confusing and very varied! probably because it is such a frustratingly frequent question that gets raised
also my laptop cant be on for very long without it shutting down from the heat so I am against the clock !
I have a problem with certain web sites, mainly BBC when the page just disappears and it just reverts to my desktop.I tried installing more up to date version of Firefox but it keeps on happening- mainly it seems when BBC site has fancy graphics.
View 14 Replies View RelatedI have successfully created a dual boot system on my Aspire One net book computer with Windows XP and Ubuntu for net books. When I use the software installer the program icon shows up but when I click on the icon nothing happens. All of the software that was installed when I installed Ubuntu works fine. The software in question is a flight simulator named Saber.
View 1 Replies View Relateddownload new driver compiled and installed boot it is not loading. uname=Linux Kev 2.6.35.11-83.fc14.x86_64 #1 SMP Mon Feb 7 07:06:44 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
lsusb=
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
