Ubuntu Networking :: 9.10 Can't Find At&t 3G Sim Card
Feb 18, 2010ubuntu wont find a at&t 3G sim card..it doesent even show up as hardware on the network manager.what can i do to fix this?
View 3 Repliesubuntu wont find a at&t 3G sim card..it doesent even show up as hardware on the network manager.what can i do to fix this?
View 3 RepliesUbuntu 9.04 running on a Dell C640 with a Dell TrueMobile 1150 wireless card. Works perfectly under XP. Ubuntu can't find it. Wired networking finds the internet perfectly (though I'm still working on getting samba set up correctly for file/print sharing on my XP LAN).
I'm thinking I need a driver, maybe? Can't seem to locate one.
I know some wireless card can work in Master Mode but it seems use madwifi driver. I know madwifi doesn't support usb dongles find a usb wireless card which can work as AP under Ubuntu. I have check this list [URL] I am not sure if ar9170usb.ko and its device support Master MOde.
View 6 Replies View Relatedive just installed the aircrack package in my dell vostro 1310 which i bought with its ordinary wireless card ( hell knows what it is. couldn't find..).At the very first time while trying to reach my wireless internet i was using backtrack 4 and i was not sucesfull.. that would be good normally, but it was not. because i couldnt do it cuz my wireless card wasnt being recognized by airmon..so i tought..i can use my wireless with ubuntu... then i got ubuntu again.. and intalled the aircrack.. as i run it i found ou t that still it wont find my wireless card...do i need any further config. to make it work with aircrack ??i can only find eth0, which is my wired network device....
View 1 Replies View RelatedI'm new to Ubuntu. Today, I took my old Compaq Presario V3010US and gave it life with Ubuntu 10.04. The hard drive was erased and replaced with the Linux OS stuff. Ubuntu recognizes most of the hardware except my Broadcom wireless card. I find this to be a pain because i'm a newbie to linux stuff. Anyway, can anyone help me fix this? I thank you for your time reading this.
View 1 Replies View RelatedAny opinions on which of the PCMCIA wireless cards work the best out of the box? I currently have a USB wireless adapter but want to get rid of it and use my PCI slot on the laptop. I am currently running lucid. I would rather not have to mess around with NDISWRAPPER again, something that has a native linux driver would be great.
View 2 Replies View Relatedgot a new MoBo today. dropped it in and powered it up to find no network connection. when I dig though network manager I find no network devices, same with "network configuration" lspci gives:
03:00.0 Ethernet contoller [0200]: Atheros Communication Device [1969:1083] (rev c0)
ifconfig gives just the "lo" device. is there a hardware detection step I'm missing? I should mention this is a swap of one onboard NIC for another.
Mandirva cant find my internet card.or is it just me?
View 5 Replies View RelatedI have been trying to find a wireless card that will readily work with Ubuntu 10.04 Desktop. Preferably an +802.11 N with an indoor range of between 300 to 400 ft. with possibly two antennas. Am finding many that say linux on the box but find that it ain't so. Also most times with no instructions or very convoluted process that results in errors.
View 1 Replies View RelatedI have been running F13 since it came out, with the wireless working fine since I got it working (using the RPM Fusion repository, broadcom-wl-5.60.48.36-1.fc13). Since I updated software (without reading what was to be updated), yesterday, I am unable to even find wireless networks, although I am, as you can see, able to access through eth0 It is not a hardware problem, as I can not only find them, but access them on Ubuntu 9.10 live disc. Below is my lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[code].....
I have in my ubuntu 3 eth?
eth0
eth1
eth2
just eth1 has an IP address...
I just have remote access to the server via ssh.
How do I find out which eth0 is a fiber nic ? Because I know one of them are.. but I cannot assign any IP address to them..
which eth? belongs to this fiber nic ?
I'm trying to find a driver for my wireless card (Atheros AR928X) and I think it's ath9k what I need. As far as I know there isn't a linux driver for it, so I installed ndiswrapper to use a windows driver instead. The problem is that when I type modprobe ndiswrapper I get "bash: modprobe: command not found" (even as root). I know I'm missing something about modprobe, but I can't find any help on google. Anyway, I installed ndisgtk next, because I thought it would be easier, but when I go to System> Administration> Windows Wireless Drivers I get a message "Unknown error".Do you have any ideas on how I'll make ndiswrapper work?
View 3 Replies View RelatedI have Lucent Technologies Orinoco Silver 11 Mbps PCMCIA wifi card. It worked perfectly in Fedora 10, but after updating to Fedora 11 it stopped finding any wireless networks. The updating were done with automatic updating utility. The card works perfectly in Windows, I tested it today.
My laptop is HP nx6110 if that matters.
Here is the situation:
When I plug-out the card, the Network Manager disables wireless networking as it should. When I plug-in the card, wireless networking is enabled, so the system seems to recognize the card in some way.
If I try to connect to "Hidden wireless network" (because there isn't any wireless networks listed in the Network Manager) system tries to connect for a couple of minutes, and then asks wireless settings again. Orinoco card's lights DOESN'T blink normally when connecting to the network (one light should blink rapidly and one should light continuously, but both are blinking rarely or doesn't blink at all).
In System->Administration->Network in tab Hardware (hope those names are correct, I use Finnish version of Fedora...) is:
It seems that the card is detected right.
Here is what I have done to get the problem solved: In System->Administration->Network I have tried to connect to the wireless network manually (disabling the Network Manager). I can't get the connection. It gives me random error messages, sometimes "Check the cable" or something like that, sometimes just timeouts IP determination.
I have tried to connect different wireless networks, no connection. All tested networks worked with another computer.
No matter if I reboot or service network restart or plug-out plug-in the card... the problem still appears.
Tried to find (and reinstall) drivers:
Code:
No Matches found
Code:
Here is the output of lspci. The output is the same if the wifi card is connected or not.
Code:
LAN connection is working just fine.
I am recently trying to get a steady wireless connection running. I am currently using the default settings/driver Fedora 13 is stocked with. As my internet browsing is somewhat up and down in load times, I decided to check in a video game which is generally a good test for me. haha I am harshly spiking and cannot find the source of my problem so my guess is a driver issue.
lspci | grep Network:
Code:
Code:
It is is seemingly right, my Windows 7 harddrive works just fine, this is just one last of the few issues I'm having from fully formatting my winblows HD to use as Linux storage.
I cannot find any native AR5008 Linux Drivers for my card and it has been a frustrating day. I guess I'm not cut to be a network analyst just yet.
System specs:
ASUS P5Q SE/R
Intel Core 2 Quad Q9550
4GB DDR2 667
Gigabyte GTX465 1G
TP LINK TL-WN851N Wireless card
I'm trying to find out what is the difference between wifi0 and ath0 (atheros wifi card) in terms of packet counters shown in proc/net/dev pseudofile. The fact is that wifi0 and ath0 packet counters are different. I've read that wifi0 refers to the physical device and ath0 refers to virtual device over wifi0, so, as far as I know, packets counters in both devices should be the same, isn't it? Another annoying question for me is that ath0 doesn't show any erroneous packets, while wifi0 does.
[Code]..
Cannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .
View 1 Replies View RelatedI'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies View RelatedI tried to mount my Sd card with the ubuntu on Vmware. But It can't find the SD card and even my USB. Do someone met the same problem?
View 3 Replies View RelatedTrying to find a good solution to start flirting with open source i have come across ubuntu. Searched a lot in the web and found that the latest yet easiest to noobs is 10.10.3 days have passed since i have started trying ti set it up i have come across A LOT of problems due to my noobity. 1st of all yet solved in the way was an issue with my gfx card.I have the GT X 285 and every time i log in to my os i have ti resize the desktop cuz it never stays as it should. 2nd and most serious , i cant find a way to set up my sound card. I have the Creative SoundBlaste XFi Platinum.I have found tons of walkthroughs but none worked and i feel i have messed up the sound drivers system really bad. I also have an on board soundcard but i cant enable that one as well. My MB is Gigabyte P55 UD6 LGA 1156.
View 1 Replies View RelatedWell I used to have windows but it kept crashing and I don't have a lot of supplies for reformatting computers so i went to my super smart friends house (he has everything) and he put Ubuntu on my computer he set it up bbbuuuuutttt he spelled my name wrong I'm not super savvy with computers that aren't windows I've only had windows up to now and the change is kind good but slightly bad I can't find a capture card software but besides that I can't figure out how to change my name on this computer it's something small yes but it's also something that will bother me FOREVER
View 4 Replies View RelatedI recently installed Xubuntu on my old P3 laptop (Compaq Armada E500 if anyone is familiar). The laptop is a bit old, so both wired and wireless networking is done via PCMCIA cards. I have 2 cards installed, one for each purpose. I can't find the dongle for the wired card right now, so I am trying to use the wireless card. I am able to find the network I want to connect to, and type in the password since the network is secured. It tries to connect but then pops up again asking for the password (I know it is correct). Is this card supported by linux/compatible? I tried finding drivers online but the sites that had drivers were down.
View 1 Replies View RelatedJust installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
I have a HP Pavilion dv7 laptop. Can you please tell me how can I find the right driver for my sound card? When I play a mp3 via vlc in ubuntu 9.10, there is sound, but the quality is bad. And I play the same on Windows7. It plays fine.
View 9 Replies View Relatedi got a problem with my Ubuntu 10.04 LTS the sound was working just fine before but now i can't find the hardware (sound card) in preferences.the sound is working just fine in my profile but not in other two.
View 1 Replies View RelatedHow to find info and contents of the SD card via linux terminal. I found a command "mount"in internet. According to it it's in dev/sdb/.. but I didn't found such. I saw dev/sdc/
View 5 Replies View RelatedI'm trying to setup Mythbuntu on a computer connected to a TV. I have bought an USB DVB-T Receiver, named WandTV. According to LinuxTV; WandTV, aka Shenzhen Forward Video EzTV859, is supported in the Linux kernel.
When I try to setup the mythTV backend I'm being asked of what card type I have. I guess the answer to that is "DVB DTV capture card (v3.x)", but no matter what I choose, it can't find any devices.
I'm pretty sure /dev/hidraw0 is the receiver, can I use that to setup the backend?
I'm trying to find a US source for an inexpensive PCI video card, most bang for the buck.It must be a standard PCI card.
View 9 Replies View RelatedI am looking to get a sound card to put in my HTPC that is running Ubuntu 10.04. I bought Auzentech x-plosion sound card that has spdif support but it does not work. Does anyone know of any card that will work or am I out of luck??
View 2 Replies View RelatedIt found it in 10.04 on its own, in 10.10 will it do the same?
something went wrong with my upgrade I'm running in safe graphics mode even though I'm in my regular desktop session.
i have a problem with my sound card VIA VT1708B. I can't find equalizer and I can't find the option for turnin on for front panel(headphones & mic)
View 1 Replies View Related