On a Dell 14n, 10.04. Mic problem: To use the mic jack/external mic, I need to have MIC 3 selected at SYSTEM/PREFERENCES/SOUND/INPUT To use the built in mic, I need to have MIC 1 selected
How can I get these mic's to work w/o having to change the settings each time I want to switch mic's.. so that if the mic jack is plugged in, then the external mic works. and if the mic jack is unplugged, then the built in mic works.
Just got an HP dv6-2150 laptop. Dual boot with Windows 7 and 9.04 (9.10 will not work but that's a different story). The screen resolution is too low and is set at the highest option available (1024x768 which is a 4:3 aspect ratio). The HP uses the new Intel i3-330m chipset with on-board Intel HD graphics. The system is capable of 1366x768 resolution (16:9) - so how do I get it there? xorg.conf looks real generic - nothing specific to Intel.
View 7 Replies View RelatedI have a Dell E6500 laptop (1280x800 screen), which I frequently dock.The dock as two Dell 1908FP 20" monitors connected by DVI. I can move between the laptop display and the twins by manually changing display configuration in NVIDIA X Server settings, but this is a pain requiring about 15 clicks each time.
I have tried using the "Save to X Configuration File" option in the Nvidia server settings, but this seems to screw everything up. I need to dynamically change between the setups... anyone have advice on getting that done?Can the xorg.conf file be configured to do it?My xorg.conf looks like this:
Section "Screen"
Identifier"Default Screen"
DefaultDepth24[code]......
I'm still working on ubuntu 9.10 with an acer aspire 1810tz. To use my microphone I found out that I have to change my microphone settings because it's mono and the default setting is thinking it's stereo: With the Volume Controller I setup one chancel to 5 and the other to 90 and the mic is working fine. Starting Skype and using it I see that the setting is reducing the volume for the mic below 20, so nobody can hear me. I tried closing first Volume Controller and then starting Skype, no matter the volume of the mic is reduced. How do I stop this behavior?
View 2 Replies View Relatedis everytime i reboot , my keyboard is reset to USA. im in canada & it pisses me off each time i need to change it also.all my options on EMESENE is the same issue always RESET.it's like if nothing keeps the changes once rebooted.
View 1 Replies View Relatedi installed Ubuntu 10.10 yesterday, and cannot find the answer to my question. I have a whole music library of mp3's on a secondary drive that I want to use in Rhythmbox. However, in Rhythmbox's Music Player Preferences I can't get either the Library Location to change from "Multiple locations set" or the Preferred format to "CD, Lossy mp3".
When I go into Edit>Preferences>Music, where it says "Multiple locations set", it is greyed over (I think that's the term. You can't access it.) When I go into the Preferred format, mps isn't there, but it does show up in another window when I click on edit; however, the only options I have there are 'Close' and 'Help'. The help button brings up another window and syas its loading, but stays in a loading mode forever.
in 10.04 i cannot change flash settings.
View 7 Replies View RelatedWhen I go to change the Visual Effects settings from Normal to either of the other 2 choices, the screen goes black and nothing happens. Could this be a driver issue? Should I buy a video card instead of using on-board and if so, which ones work the best with Ubuntu?
View 1 Replies View RelatedI really, really like Banshee and I really, really don't want to use gtkpod or rythmbox
Overview:I have a 5th gen video ipod which I'm trying to load onto my banshee.I was able to do this in the past, but since the upgrade to 10.04 (WHICH IS AWESOME!!) I've been S.O.L. Previously, I had to change some settings in order to get the ipod to sync w banshee, and I'm wondering if that's why I'm blocking it's native ability to sync. I'm trying to remember what changes I've made,but it's been awhile...
Breakdown: - in order to mount the iPod, I have to go to Places>Ipod and select it from the list
- I then open banshee, and the ipod is recognized in my menu
- when I go to load it, it says "loading ipod", which goes indefinitely and never ends...
- in addition, it does not recognize any music/video is on my ipod - only 11.9gb of "other"
...and that's it. I would love to load my new music
I searched the forums for a long time and could not found any relevant informationI am new to ubuntu (10.10 64bit) and I just want to know if it is possible, like it is in win7 (sorry!), if I can plug in my hdmi cord and have the laptop speakers and display disable, and have the external display and its spears enabled.
View 2 Replies View Relatedi have a computer with 3 users on it, and a folder using samba that everyone on the network has access to. Lets say that, the folder is stored in /etc/sharedfolder. What happens is, when user1 puts a folder in it, then logs off, user 2 attempts to modify it and fails, because permission is set to 755, and they are not in the same group. (even if they were, it should still need to be 775) Anyway, my current solution is, every 5 minutes a crontab changes permission like so: chmod 777 -R /etc/sharedfiles && chown useradmin:superadmin -R /etc/sharedfiles Which works, but seeing as there is getting close to a gig in there, this is a bad solution, as it eats up the computers resources. Solutions that i think might work:
1) create a script that only changes permissions that need be changed.
2) change file permission settings to force all documents to inherit parent document settings
I currently have a Windows XP OS which i want to dual-boot with Ubuntu Linux 10.10 . I put the disk in the drive and chose the option to install Linux through Windows. But it hangs in the middle. I am also unable to change my BIOS settings due to which i can"t change my boot preference. My first Boot is the HDD. I want to change it to CD-ROM. Any suggestion? I also have another PC where i can boot through the CD...I tried installing there by booting from the CD but i get this error message after seeing the purple Linux screen with the loading dots. "(Process:286):Glib warning**:getpwuid:failed due to unknown user id (0)
P.S.- I am not able to see any options while the boot is going on
I was configuring the vnc server or remote desktop using the "gconf-editor" -- "desktop - gnome - remote_access" pane, and first I clicked on "disable background" to see if it was usefull or not to disable it (in terms of speed). It worked fine but sometimes when closing the connection, the background refuses to reenable, mantaining the black background...
That's ok, I decided to disable the feature and share via vnc the background as it is a wired net and I do not really need this feature.
My surprise is that now, whith the feature DISABLE (box unchecked), I cannot set a background, it is always black and I find no way to go back in this...
is this common, or something that can be "easily" fixed?
Does anyone know where I could find the commands with which you use to change the desktop settings.
I want to write a script which changes my monitor settings on Kubuntu 10.10 and redraws the taskbar.
Is there a way to do an install from the iso image to a new disk (USB or whatever), without changing the grub settings on the systems existing hard drive? Every time I try to do a full install to a USB stick, it hoses grub on my hard disk, even though I specify the partitioning during the install, and leave /dev/sda untouched. This has happened now with both Karmic and Lucid.
View 4 Replies View RelatedI am administrating a system with about 40 or 50 users, and we recently jumped ship from windows to ubuntu. Most of my users are getting along fine, but it seems every few days, i have to help someone who accidentally changed something, and now their account (or more rarely, the machine) is unusable, and has to be reset.
I know configuring /etc/sudoers is a huge step toward fixing my problem, but that still will not completely solve it. What I would like to do is prevent users from making ANY changes to the system (aside from their work files and the like), including themes, icons, desktop, background, etc.
On my Kubuntu 10.04 machine changing the icons is done in the appearance section in menu-system settings-appearance then selecting icons. Can this be done in Ubuntu 10.04 and if so how?
View 1 Replies View RelatedI was playing around with the settings of my Mint 7 terminal, changing colors, fonts etc.After closing, I tried to open it again by clicking on the icon and it shutsdown as soon as it opens. I can't do anything since the preferences require me to have my terminal open in the first place.
View 6 Replies View RelatedNot sure if the font by Default in opensuse 11.4 is intended to look "thin" but I want to make it look "standard" I tried setting changing the settings in the fonts menu but its not what I was searching for. How do I make the system font more "round and smooth". If anyone has tried the distro Ubuntu or Fedora, the font is more "plain."
View 6 Replies View Relatedonce upon a time i manually entered my ISP's DNS servers in /etc/resolv.conf Now i have changed ISP, my old DNS setting are still present even though i have edited my resolv.conf file to my new ISP's DNS servers. Internet still works fine, i just want to use my new ISP's DNS as my old ISP will be closing its doors very soon. Am i doing something wrong, or better put.forgot to edit another file..? I did do this a while ago, so i apologise in advance for my incompetence. I'm stilling running 11.1 / Router has DHCP configured. my resolv.conf file is below
Code:
cat /etc/resolv.conf
### /etc/resolv.conf file autogenerated by netconfig!
#
# Before you change this file manually, consider to define the
# static DNS configuration using the following variables in the
# /etc/sysconfig/network/config file:
# NETCONFIG_DNS_STATIC_SEARCHLIST
[Code]...
I am having a problem with servers that have been set up using the dollar $ symbol as the system currency setting and I need to change this to the South African rand 'R' symbol. I only have remote access to the systems via ssh (putty) and I have this issue on both a RHEL5 and OpenSuSE 11.? machine so I am looking for a generic solution. Is there a configuration file, command or command line tool I can use/ change to change this setting.
View 3 Replies View RelatedI got a Slackware 12.1 on a Dell Inspiron 1525 laptop which is a multi boot system along with Vista and Ubuntu Hardy. I tried using Slackware after several months. The last time I used Slackware, I was at university where the Network settings were Manual - Static IP, Gateway, DNS all specified according to location (dorm room). I moved out of univ and now have a network connection with DHCP. Basically I connect to a server, login with the info the service provider has given me.
Problem is I can't change the Network settings through Control Center in KDE. It just doesn't register any changes even if I reboot. Through Konsole and as root, I could change the settings using netconfig. But then I need a reboot to register the changes. Why is this so? Anyway to avoid a reboot? In my Ubuntu Hardy, there is no need for a reboot when I change the settings. Thats quite convenient.
I am having a problem getting my Slackware 13.0 to accept a timezone cmos setting change. My cmos was set to local time and my Slackware was displaying the correct time as EST. Cmos was set localtime to be compatible with dual booting Windows I have now removed Windows and replace it with Ubuntu. Now, Ubuntu wants the hardware clock to be UTC, which is the norm for unicis. SO, lets make Slackware treat the hardware clock as UTC.
I go to /etc/hardwareclock make these changes.
utc
#localtime
I reboot setting cmos to UTC, but now when I come up Slackware displays UTC and calls it EST. I go to the date/time app under the system xfce menu, but all it says it is set to UTC (EST) and change from the list below. The list below only has UTC listed. So, now how do I get it subtract the necessary five hours?
I was just doing some basic changes really for Orta and now when I try to login to Ubuntu, the text box for entering my password at the login screen.
View 9 Replies View RelatedI am not sure where to post that so I'll just try here.My main question is: How can I prevent the system from changing my cpufreq settings? I'd like to keep the CPU load as low as possible so these settings are probably the best.However when I run some applications that require a higher CPU load the system changes the governor to performance and the rang to 0.8 - 2.4 GHz.And that's my problem. I neither know what application exactly is responsible for changing my cpufreq settings nor do I know how to turn that off.Or is it supposed to be that way?
View 11 Replies View RelatedFailed to fetch [URL] Could not connect to 127.0.0.1:8118 (127.0.0.1). - connect (111 Connection refused)----when tor and polipo are not running---
Possible causes:
I just installed tor, privoxy, and polipo and set them up for web browsing anonymity. Other than that I don't recall making any system wide changes.
Other Info:
I can access the internet via a web browser and other programs just fine because i can manually edit each program's internet connection settings. apt-get works when tor and polipo are running. I have used tor and privoxy/polipo in the past and this has never been a problem, so I must have done something different this go around. Obviously I am not sure what that is. Attached are the applicable config files.
Finally installed my openSUSE system. How do I change the keyboard setting? Is it in the file xorg.conf? Where is it located?
View 5 Replies View RelatedI have 2 screens connected to my nVidia 8400GS and would like to change my video card settings so that the system boot shows in the Digital screen and not in the Analog one.
View 3 Replies View Relatedwe're running an Ubuntu 10.04 LTS network on our company, authenticating against an Openldap/heimdal-kerberos server.Previously, the clients were authenticating against a Windows 2003 Domain without any problems.After modifying the krb.conf, ldap.conf, nsswitch.conf and nscd.conf files to authenticate the machines against the openldap/heimdal setup, we started experiencing strange problems.
One issue is, for example, the polkit-agent-gnome not starting. This component integrates policykit into gnome. It looks like the agent is unable to start due to some kind of delay with DBUS. Starting the agent manually keeps giving errors until about 70 seconds after login, when the agent can be started without problems. During the delay it is also impossible, for instance, to open the "shut down" menu on the top right of gnome. You can click on the menu, but nothing appears.Trying to start the polkit-agent manually gives these errors (I'll be attaching detailed errors when at work!):
Code:
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken
GLIB ERROR ** default - Not enough memory to set up DBusConnection for use with GLib It really looks like DBus or something related to it is starting "too late" but I can't seem to find the reason. I'm pretty sure this has to do with some timings or whatever in the krb/ldap config files...
I have a Dell 1505E with Debian 3.16.7 which is unable to connect to channels 12 and 13 even after changing wifi regional settings to different countries (using iw reg set).12 and 13 are legal to use in the UK. What should I do?
Code: Select allsudo lspci | grep -i wireless
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
Code: Select alllspci -vv -s 02:00.0
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
Subsystem: AzureWave Device 2047
[code]....