Ubuntu Multimedia :: Pulse Audio Volume Controller: Stop It From Changing Settings?
Jun 12, 2010
I'm still working on ubuntu 9.10 with an acer aspire 1810tz. To use my microphone I found out that I have to change my microphone settings because it's mono and the default setting is thinking it's stereo: With the Volume Controller I setup one chancel to 5 and the other to 90 and the mic is working fine. Starting Skype and using it I see that the setting is reducing the volume for the mic below 20, so nobody can hear me. I tried closing first Volume Controller and then starting Skype, no matter the volume of the mic is reduced. How do I stop this behavior?
View 2 Replies
ADVERTISEMENT
Jun 20, 2015
I'm using Mate on Jessie. The problem is that mate-volume-control kinda sucks as an audio control. It doesn't have nearly enough options for a proper volume control program. Pulse is much better for my needs. It or Alsa. Is it possible to remove mate-volume-control, or at least make Pulse the default volume control?
View 5 Replies
View Related
Jun 26, 2010
When I hit the Pulse Audio Device Chooser icon and then click on 'Volume Control' the volume control GUI flashes on for long enough for me to realise it has flashed on and then is gone again! If I run the chooser as root from a terminal (sudo padevchooser) I get this response when I hit the error:
Code:
**
** ERROR:(pavucontrol.cc:339):void StreamWidget::setVolume(const pa_cvolume&, bool): assertion failed: (v.channels == channelMap.channels)
Strange thing is, I have spent a lot of time working on my wife's laptop and Pulse Audio was working great (after many brain twisting, hair ripping hours of working on it) and indeed is still working despite the lack of GUI. This is all good except I want to change the output device for ringing in Skype and this is where I need to 'Move Stream ...' and can't get to it.
View 1 Replies
View Related
Oct 17, 2010
I'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).
I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.
Hence I am looking at Gnome.
I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.
I note these updated packages in the openSUSE-11.1 update repository:
Code:
So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?
Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).
View 6 Replies
View Related
Mar 25, 2010
I have Intel core 2 duo machine running Ubuntu Karmic 64-bit.
Whenever I play a mp3 on rythmbox and use the "top" command, the pulse audio is at top at 100%.
Is it trying to break my system just by running a mp3?
Is my system not able to detect two cores? or Whatever?
It's just unbearable.
Here is the output of top command:
Code:
laxman@Cray-Jaguar:~$ top
top - 20:36:50 up 2:00, 2 users, load average: 0.71, 0.45, 0.45
Tasks: 162 total, 2 running, 160 sleeping, 0 stopped, 0 zombie
Cpu(s): 3.0%us, 48.4%sy, 0.0%ni, 48.6%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 2055676k total, 1778616k used, 277060k free, 100396k buffers
[Code].....
View 9 Replies
View Related
Feb 11, 2011
I am using Linux mint Debian Version 64 bit.What may be the fix?? I attached the image.
View 1 Replies
View Related
May 20, 2011
I would like to redirect pulseaudio sound through ssh to a local client while seeing content through a vnc connection. Something like this:
Client: ssh -L 5901:localhost:5901 user@server.net
Client: vncviewer localhost:5901
Server: Run a web browser with flash content on the server through vnc, but sound is redirected to the client.
A good example is Facebook flash games, most flash games require flash player 10 but my local client only supports up to version 9 because of the architechture.
Why? A number of reasons:
- The local client is not powerful enough to run flash content
- The local client has an architechture that flash does not support, eg ARM, PowerPC, etc.
- Save battery power - use the resources of a server instead of the client.
Environment:
Both the client and server have pulse audio installed and working. The server does not have a physical sound card installed but the client does.
Server: Ubuntu 10.04
Client: Ubuntu 10.10
I have tried these links so far: [URL]
View 4 Replies
View Related
Apr 3, 2010
I've searched and searched and can't find a straight answer about this. I want to sent the same signal out of the digital output and one of the analog outputs on the soundcard (Intel HDA) on my motherboard. I'm using ALSA and Pulse Audio.
View 5 Replies
View Related
Jul 16, 2010
Just noticed that during calls skype uses ~30-50% cpu, + pulseaudio uses ~20%. I found some old threads on this like [URL] Or [URL]. The former suggests to purge pulse and use alsa/oss instead. The latter suggests changing mic in skype to DeviceXX and tweak the pulse.conf
There's also a launchpad bug on that with status Confirmed->invalid (due to "problem fixed in skype 2.1 beta") but looks like it's not (I am using 2.1 beta)
1. Does any1 has this problem?
2. I can't try 2nd link's approach as my skype has only PulseAudio in the settings, so I can't select Device or anything else!
3. Should I try to remove pulse in favor of ALSA? I'm pretty happy with pulse otherwise that this issue, I use it to record sound out of my sound card and I'm not sure if I can do this with alsa/os.
View 4 Replies
View Related
Feb 2, 2011
When using Skype, the sound suddenly stops working, both ways (about 4-5 min into the communication). The message "connection failed: connection terminated" is displayed and when I click OK, Pulse Audio closes and Skype freezes. Actually, and I just realized this, the sound suddenly stops working on Firefox as well. (The Alsa plugin in Pulse Audio 'Playback' just disappears). However this occurs after a long period of use. I've just watched about 30 continuous minutes of live soccer through Espn3, before the audio stopped working. No message was displayed though, and just refreshing the page fixed it.
All this makes me think this is some type of Alsa-Pulse Audio problem. I really don't understand well what they are, although I believe Alsa is a driver and Pulse Audio a sound server? Sorry, I started using Linux very recently. I am using Ubuntu-Studio 10.04 and the rt Kernel (2.6.33-29-realtime). Sometimes I use Pulse Audio in Jack and vice-versa, using pactl load-module module-jack-sink and source respectively, but my problem seems to occur even if I unload the modules before using Skype. I believe all this started happening after I started using the rt kernel and/or the module-jack-sink/source.
View 2 Replies
View Related
Nov 22, 2009
switch between Pulse Audio ALSA OSS etc in 11.2
View 5 Replies
View Related
Mar 4, 2011
switch between Pulse Audio ALSA OSS etc in 11.2
View 1 Replies
View Related
Jan 4, 2010
I'm trying to get mplayer to recognize ALSA and/or pulse audio server, preferably both. On my laptop, mplayer works fine -- mplayer -ao help lists oss, alsa, pulse, and jack, among others. But here's the output of mplayer -ao help on the computer I'm trying to set up:
[Code].....
ALSA and pulse are both installed, and pulse is running -- ps -A | grep pulse gives: 3627? 00:00:00 pulseaudio Yet, mplayer fails to realize this. I'm sure I'm doing something wrong that's really simple...but what?
View 2 Replies
View Related
Mar 4, 2010
I have Ubuntu 9.10 installed but the sound is way below normal..
Pulse-audio just doesn't give enough output..
Max output is just average...
I have a 945 Intel chipset..
View 1 Replies
View Related
Dec 13, 2009
i just upgraded from Skype 2.0.0.72 to 2.1.047. Now my microphone isn't working anymore and i cannot select it in the skype options. From now on i can only select the PulseAudio server ..
So i have read some howtos for PulseAudio. They say i should starte PulseAudio Volume Control. ok.. Now i should go to the tab "Recording". This tab doesnt exist on my pc. I upgraded to the latest version of this volume control. It still doesnt exist.
I am using OpenSuse 11.0 with KDE4.3
Here are some screenshots:
[URL]
PS: My mic is still working with applications, that dont use pulseaudio.
View 4 Replies
View Related
Apr 11, 2011
I hear Pulse Audio is the culprit of all the sound issues. I would like to remove it, and default to straight ALSA or whatever distros like Fedora and Ubuntu use, which has never been problematic for me.
View 9 Replies
View Related
Jun 18, 2011
I'm trying to capture audio from a stream, NOT from the mic. This is what I'm doing: Start Audacity, push its record button, play a song. It shows that it is recording but when I play back the results, all background noise, conversation, etc, is in the recording as well as the audio from the song. If the mic is unplugged, I cannot record what I hear coming from the sound card (as in what you hear from the sound card is what you get). I got directions on how to do what I want here ( Looking (maybe) for audio mixer for use with Pulse Audio - Page 2 Posts # 4 and 5) but it's not permanent. I got the instructions in post #11 from that same page to make such a change permanent. I tried using the instructions to make the change permanent (I backed up my default.pa just in case something went wrong) and these are the changes I had made:
Code:
### Load audio drivers statically (it's probably better to not load
### these drivers manually, but instead use module-hal-detect --
### see below -- for doing this automatically)
#load-module module-alsa-sink
[code]....
View 3 Replies
View Related
Aug 2, 2011
I have a TV card connected to my Dish box, and I would like to use it on my computer. The tv card works fine, and the audio is connected to my line in. The audio card receives the audio signal, and I can set the volume and record it without any problem, but I can't get it to redirect to an output in order to hear the sound. I have been battling with this issue since a kernel update back when 11.2 was about to come out. Back then, the alsa mixer had an option called audio loop-back, which did the trick. Since I know I ca record the audio and play it back without any problem, is there an application that can do this automatically and simultaneously?
View 1 Replies
View Related
Aug 19, 2010
I have the usual problem of "My sound is not working". I have a few images and my output from:
Code:
lspci
Code:
lspci -v
and
Code:
aplay -l
I can't really do anything with the speaker as it is hidden in the case.
View 9 Replies
View Related
Nov 18, 2009
I am having trouble getting the pulse audio server to find the hw0 with the common m-audio 24/96 audiophile. This card worked with previous versions of all forms of pulse but seems to bork on the HW0 function for audio out...which is a stereo analogue simple output. Audacity sees the HW functions but pulse does not! Here is a screen shot of the pulse crap. And another screen shot of what the real card at "alsamixer -c 0" sees. There is no dac or adc detected or configured with pulse. This does not make any sense as alsa and alsamixer has all the correct device controls available to any other software that uses the ice1712 driver.
I am using Fedora 12 amd 64 as a live usb on a 16 gig stick and want to be able to record and mix audio on to HD with my reliable high end m-audio pci sound card without having to mess with the pulse crap or having to install a full HD option. BTW in the pulse sound configuration gui dropdown list there is no indication of HW0 and the only devices that are available in pulse are digital outs.....go figure, so essentially I can see all the correct connections and use programs that access alsa directly eg: audacity but have no sound through the crappy and ever borked pulse audio server! Any suggestions as to how to remove all the pulse stuff that comes with most distros that use gnome? I have done this deed before with Ubuntu but do no know how to do the deed with an rpm based system. If I install a non pulse version of xmms and let it use jackd then I should have reliable sound for cd audio etc and should be able to configure VLC, Ardour and Nted well without pulse getting in on the action and screwing up my sound.
View 1 Replies
View Related
Dec 12, 2010
I've recently got a problem. I've installed projectM, the pulse audio version. It worked fine until a couple of days. I noticed, that the visualization isn't synchron with the music. Then I opened pulse audio to check the volume controls. The blue bars showing the intensity of the loudness don't move at all, it's all gray. ProjectM can't analyze the music and therefor cannot visualize correctly.
View 6 Replies
View Related
Jan 3, 2011
Since a few days my audio volume adjusts itself while listening music (rythmbox) or watching a movie (vlc). Anyone else have these problems? It's really really annoying.
My system:
Ubuntu 10.04, 64 bit on intel i5
sound card: VIA VT1828S (onboard Asus P7P55D-E mainboard)
View 9 Replies
View Related
Jul 7, 2010
I am currently troubled with a very annoying problem - the volume level of the PC is jumping higher and lower at random intervals. It makes listening to music very difficult, as at times the music can go from just right to overly loud, just to fall right down so that it is hard to hear. I've only noticed this problem in the past few weeks, and I can definitely say it wasn't an issue in 9.10. This is a fresh install btw, not an upgrade.
Some details:
Using motherboard sound, Realtek HD Audio, iirc. Below is the output of lshw, with the irrelevant parts cut out.code...
View 7 Replies
View Related
Aug 29, 2010
where i can find a driver for Multimedia audio controller: nVidia Corporation nForce2 AC97 for Linux
View 5 Replies
View Related
Feb 12, 2011
I was wondering how you can change the music player that the volume task-bar applet uses? It's really starting to bug me now as I am sure I've seen the setting somewhere.
View 1 Replies
View Related
Apr 8, 2011
When i installed Ubuntu, everything worked fine, sound drivers installed automatically and volume was perfect.Then one day as I was talking to a friend on skype, I tried changing the output to speakers from my headset during the call and i didnt get any output. I tried changing a few settings, can't remember which ones exactly until I noticed someone had pulled the audio cable from the back of my PC. I replaced it but I started getting very very low sound.I found out about alsamixer and when I ran it, I found that the volume on that device was turned down, i turned it up and voila! sound back to normal.However, now when I reboot, my sound goes down again. I have tried deleting the asound.state file and running the save command, "sudo alsactl store 0" I think, as someone suggested, but no cigar.
View 3 Replies
View Related
Sep 18, 2010
On a Dell 14n, 10.04. Mic problem: To use the mic jack/external mic, I need to have MIC 3 selected at SYSTEM/PREFERENCES/SOUND/INPUT To use the built in mic, I need to have MIC 1 selected
How can I get these mic's to work w/o having to change the settings each time I want to switch mic's.. so that if the mic jack is plugged in, then the external mic works. and if the mic jack is unplugged, then the built in mic works.
View 9 Replies
View Related
May 20, 2010
I have a Logitech clearchat pro usb headset and it works really well. However every time I plug it in I have to turn up its volume in alsa mixer. Also so that the right volume slider is controlled (by the volume keys) I have to change the output in pavucontrol. Does anyone know of a way that I can make this happen on its own? I guessed writing a udev rule might work (not that I have ever done one), but I don't know the commands that are equivalent to what I do.
View 1 Replies
View Related
Apr 25, 2011
When I go into Sound Preferences I can crank up the output volume above 100%, making it audible from my monitor's built in speakers.
(this is for a kiosk that doesn't have room for extra powered speakers) Every time I reboot it resets output volume to 100%. Is there a way to change the volume back to 125% or whatever max is so the general public can hear the video that is played after a reboot? (this is to be a permanent installation that won't even have a keyboard or mouse attached, so automating this is a must)
View 2 Replies
View Related
Aug 3, 2010
I have to keep changing back to Packman packages because updates changes vendor all the time....is there a way to switch to Packman packages and have it stay that way? Any zypper settings?
View 6 Replies
View Related
