General :: Changing System Currency Settings Using CLI
Sep 28, 2010
I am having a problem with servers that have been set up using the dollar $ symbol as the system currency setting and I need to change this to the South African rand 'R' symbol. I only have remote access to the systems via ssh (putty) and I have this issue on both a RHEL5 and OpenSuSE 11.? machine so I am looking for a generic solution. Is there a configuration file, command or command line tool I can use/ change to change this setting.
View 3 Replies
ADVERTISEMENT
Apr 10, 2011
I am not sure where to post that so I'll just try here.My main question is: How can I prevent the system from changing my cpufreq settings? I'd like to keep the CPU load as low as possible so these settings are probably the best.However when I run some applications that require a higher CPU load the system changes the governor to performance and the rang to 0.8 - 2.4 GHz.And that's my problem. I neither know what application exactly is responsible for changing my cpufreq settings nor do I know how to turn that off.Or is it supposed to be that way?
View 11 Replies
View Related
Mar 28, 2010
Failed to fetch [URL] Could not connect to 127.0.0.1:8118 (127.0.0.1). - connect (111 Connection refused)----when tor and polipo are not running---
Possible causes:
I just installed tor, privoxy, and polipo and set them up for web browsing anonymity. Other than that I don't recall making any system wide changes.
Other Info:
I can access the internet via a web browser and other programs just fine because i can manually edit each program's internet connection settings. apt-get works when tor and polipo are running. I have used tor and privoxy/polipo in the past and this has never been a problem, so I must have done something different this go around. Obviously I am not sure what that is. Attached are the applicable config files.
View 2 Replies
View Related
Aug 5, 2010
On my Kubuntu 10.04 machine changing the icons is done in the appearance section in menu-system settings-appearance then selecting icons. Can this be done in Ubuntu 10.04 and if so how?
View 1 Replies
View Related
Apr 24, 2010
I have a file of the formcol1, col2, $330,000, col4 ...col1, col2, col3, col4 ..col1, col2, $230,000, col4 ...The comma within the currency value causes the column to display unevenly when I open it so I want to remove it. I think I should be able to use the sed command but I am not sure extactly how. All the values have 3 digits after the $ and before the , so have triedsed -e 's/$[0-9]*,/ but I am not sure how to 'replaced with the string found just without the comma'So two guestions:1. Is this a good way to do it?2. How do I do it
View 8 Replies
View Related
Sep 1, 2011
is everytime i reboot , my keyboard is reset to USA. im in canada & it pisses me off each time i need to change it also.all my options on EMESENE is the same issue always RESET.it's like if nothing keeps the changes once rebooted.
View 1 Replies
View Related
Jan 31, 2010
Did you play too much with compiz and after-a-while you realize that certain functions are not working anymore?
Well, just follow the steps below:
Quote:
gconftool-2 --recursive-unset /apps/compiz
Then,
Quote:
Restart your PC / lappy
[URL]
View 4 Replies
View Related
Apr 1, 2011
Is there a way I can save system settings and have yast revert to a config file in case I ever need to reinstall the system again? I hate having to configure the firewall, runlevels, samba shares, samba workgroup, apparmor, and all the other junk after every install. It's not like I install often, but should suse 11.5 or 12 roll out, I'd like it to be a snappy upgrade.
View 6 Replies
View Related
Aug 22, 2010
I am interested in changing the Operating system on an old laptop of mine from Vista to Linux. Problem is I don't know anything about Linux. I have been told Fedora is a good distribution for me to get started with. uninstall windows and get started with Linux?
View 3 Replies
View Related
Mar 21, 2010
I just made the complete switch from windows 7. I'm looking for a weather applet and a currency conversion applet for my desktop.
I tried gdesklets but I couldn't get any of the weather applets to work. They couldn't find weather data. The weather part of my gnome-panel works fine.
I also couldn't find a simple currency conversion tool with gdesklets.
Ps: major kudos for anyone who can find a tv guide desklet.
View 5 Replies
View Related
Mar 15, 2011
Not sure if the font by Default in opensuse 11.4 is intended to look "thin" but I want to make it look "standard" I tried setting changing the settings in the fonts menu but its not what I was searching for. How do I make the system font more "round and smooth". If anyone has tried the distro Ubuntu or Fedora, the font is more "plain."
View 6 Replies
View Related
Jan 8, 2011
once upon a time i manually entered my ISP's DNS servers in /etc/resolv.conf Now i have changed ISP, my old DNS setting are still present even though i have edited my resolv.conf file to my new ISP's DNS servers. Internet still works fine, i just want to use my new ISP's DNS as my old ISP will be closing its doors very soon. Am i doing something wrong, or better put.forgot to edit another file..? I did do this a while ago, so i apologise in advance for my incompetence. I'm stilling running 11.1 / Router has DHCP configured. my resolv.conf file is below
Code:
cat /etc/resolv.conf
### /etc/resolv.conf file autogenerated by netconfig!
#
# Before you change this file manually, consider to define the
# static DNS configuration using the following variables in the
# /etc/sysconfig/network/config file:
# NETCONFIG_DNS_STATIC_SEARCHLIST
[Code]...
View 9 Replies
View Related
Sep 18, 2010
On a Dell 14n, 10.04. Mic problem: To use the mic jack/external mic, I need to have MIC 3 selected at SYSTEM/PREFERENCES/SOUND/INPUT To use the built in mic, I need to have MIC 1 selected
How can I get these mic's to work w/o having to change the settings each time I want to switch mic's.. so that if the mic jack is plugged in, then the external mic works. and if the mic jack is unplugged, then the built in mic works.
View 9 Replies
View Related
Oct 12, 2010
I was configuring the vnc server or remote desktop using the "gconf-editor" -- "desktop - gnome - remote_access" pane, and first I clicked on "disable background" to see if it was usefull or not to disable it (in terms of speed). It worked fine but sometimes when closing the connection, the background refuses to reenable, mantaining the black background...
That's ok, I decided to disable the feature and share via vnc the background as it is a wired net and I do not really need this feature.
My surprise is that now, whith the feature DISABLE (box unchecked), I cannot set a background, it is always black and I find no way to go back in this...
is this common, or something that can be "easily" fixed?
View 1 Replies
View Related
Feb 28, 2011
Does anyone know where I could find the commands with which you use to change the desktop settings.
I want to write a script which changes my monitor settings on Kubuntu 10.10 and redraws the taskbar.
View 1 Replies
View Related
Sep 9, 2010
I got a Slackware 12.1 on a Dell Inspiron 1525 laptop which is a multi boot system along with Vista and Ubuntu Hardy. I tried using Slackware after several months. The last time I used Slackware, I was at university where the Network settings were Manual - Static IP, Gateway, DNS all specified according to location (dorm room). I moved out of univ and now have a network connection with DHCP. Basically I connect to a server, login with the info the service provider has given me.
Problem is I can't change the Network settings through Control Center in KDE. It just doesn't register any changes even if I reboot. Through Konsole and as root, I could change the settings using netconfig. But then I need a reboot to register the changes. Why is this so? Anyway to avoid a reboot? In my Ubuntu Hardy, there is no need for a reboot when I change the settings. Thats quite convenient.
View 5 Replies
View Related
Feb 12, 2011
I am having a problem getting my Slackware 13.0 to accept a timezone cmos setting change. My cmos was set to local time and my Slackware was displaying the correct time as EST. Cmos was set localtime to be compatible with dual booting Windows I have now removed Windows and replace it with Ubuntu. Now, Ubuntu wants the hardware clock to be UTC, which is the norm for unicis. SO, lets make Slackware treat the hardware clock as UTC.
I go to /etc/hardwareclock make these changes.
utc
#localtime
I reboot setting cmos to UTC, but now when I come up Slackware displays UTC and calls it EST. I go to the date/time app under the system xfce menu, but all it says it is set to UTC (EST) and change from the list below. The list below only has UTC listed. So, now how do I get it subtract the necessary five hours?
View 2 Replies
View Related
May 13, 2010
Is there a way to do an install from the iso image to a new disk (USB or whatever), without changing the grub settings on the systems existing hard drive? Every time I try to do a full install to a USB stick, it hoses grub on my hard disk, even though I specify the partitioning during the install, and leave /dev/sda untouched. This has happened now with both Karmic and Lucid.
View 4 Replies
View Related
Jun 15, 2011
I am administrating a system with about 40 or 50 users, and we recently jumped ship from windows to ubuntu. Most of my users are getting along fine, but it seems every few days, i have to help someone who accidentally changed something, and now their account (or more rarely, the machine) is unusable, and has to be reset.
I know configuring /etc/sudoers is a huge step toward fixing my problem, but that still will not completely solve it. What I would like to do is prevent users from making ANY changes to the system (aside from their work files and the like), including themes, icons, desktop, background, etc.
View 2 Replies
View Related
Mar 24, 2011
I know that some settings can only accessed by root (like the login manager). KDE 3 had a button where you could become root to access it.Where is this button in KDE 4? After googling I found year old articles mentioned that you should kdesu gksu systemstettings in CLI, which was ok when KDE 4 was new, buggy. But my hairs stand on end of having to use such a dirty workaround for a standard feature.Has KDE 4 taken a step back, lost an essetial and obviously necessary feature here compared to 3?
View 2 Replies
View Related
Aug 13, 2010
I,m new to linux. I don't know how to do settings for Internet connection.
so, please send me complete detail of how to make settings for Internet connection.
View 3 Replies
View Related
Apr 14, 2010
Finally installed my openSUSE system. How do I change the keyboard setting? Is it in the file xorg.conf? Where is it located?
View 5 Replies
View Related
Jan 26, 2010
Just got an HP dv6-2150 laptop. Dual boot with Windows 7 and 9.04 (9.10 will not work but that's a different story). The screen resolution is too low and is set at the highest option available (1024x768 which is a 4:3 aspect ratio). The HP uses the new Intel i3-330m chipset with on-board Intel HD graphics. The system is capable of 1366x768 resolution (16:9) - so how do I get it there? xorg.conf looks real generic - nothing specific to Intel.
View 7 Replies
View Related
Aug 14, 2010
I was playing around with the settings of my Mint 7 terminal, changing colors, fonts etc.After closing, I tried to open it again by clicking on the icon and it shutsdown as soon as it opens. I can't do anything since the preferences require me to have my terminal open in the first place.
View 6 Replies
View Related
Apr 7, 2011
I did something weird and now my text size is like 3pt on every system window, but when I go in and change my window fonts to larger to something that looks normal, it makes my clock, bash, and other fonts absolutely gigantic. Is there any way I can just roll back my system and it's settings? It wouldn't be much bother as I installed the OS yesterday. I'd hate to have to reinstall entirely though
View 1 Replies
View Related
Jan 14, 2010
I bought a used Acer Aspire one with Linux on it and it works great. I want to restore it to factory settings but I do not have a restore disk. (not to mention that the unit doesn't have a CD drive anyways.)
I have read on other sites that Alt-F10 works but I think that is only for WIN because I can not get that to work. Is there an equivalent function with Linux.
View 1 Replies
View Related
Feb 23, 2010
I have a Dell E6500 laptop (1280x800 screen), which I frequently dock.The dock as two Dell 1908FP 20" monitors connected by DVI. I can move between the laptop display and the twins by manually changing display configuration in NVIDIA X Server settings, but this is a pain requiring about 15 clicks each time.
I have tried using the "Save to X Configuration File" option in the Nvidia server settings, but this seems to screw everything up. I need to dynamically change between the setups... anyone have advice on getting that done?Can the xorg.conf file be configured to do it?My xorg.conf looks like this:
Section "Screen"
Identifier"Default Screen"
DefaultDepth24[code]......
View 5 Replies
View Related
Mar 27, 2011
I was just doing some basic changes really for Orta and now when I try to login to Ubuntu, the text box for entering my password at the login screen.
View 9 Replies
View Related
Mar 17, 2009
I have 2 screens connected to my nVidia 8400GS and would like to change my video card settings so that the system boot shows in the Digital screen and not in the Analog one.
View 3 Replies
View Related
Apr 23, 2011
we're running an Ubuntu 10.04 LTS network on our company, authenticating against an Openldap/heimdal-kerberos server.Previously, the clients were authenticating against a Windows 2003 Domain without any problems.After modifying the krb.conf, ldap.conf, nsswitch.conf and nscd.conf files to authenticate the machines against the openldap/heimdal setup, we started experiencing strange problems.
One issue is, for example, the polkit-agent-gnome not starting. This component integrates policykit into gnome. It looks like the agent is unable to start due to some kind of delay with DBUS. Starting the agent manually keeps giving errors until about 70 seconds after login, when the agent can be started without problems. During the delay it is also impossible, for instance, to open the "shut down" menu on the top right of gnome. You can click on the menu, but nothing appears.Trying to start the polkit-agent manually gives these errors (I'll be attaching detailed errors when at work!):
Code:
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken
GLIB ERROR ** default - Not enough memory to set up DBusConnection for use with GLib It really looks like DBus or something related to it is starting "too late" but I can't seem to find the reason. I'm pretty sure this has to do with some timings or whatever in the krb/ldap config files...
View 3 Replies
View Related
