Ubuntu Networking :: Ethernet Card Not Getting Detected

Dec 3, 2010

I have brought a new DELL INSPIRON 1410. I installed ubuntu 10.04 but my ethernet card is not getting detected where as in windows 7 is working..

View 2 Replies


ADVERTISEMENT

Ubuntu Networking :: On-board Ethernet Port Not Detected - Have To Use PCI Card?

Jul 21, 2011

I'm running an ubuntu maverick server, and I'm having a slight problem with networking. I've only got one ethernet line running into my room, and I've got loads of computers. The server has 2 ethernet ports, one integrated into the motherboard, one on a PCI card that I took from my old server. The on board ethernet never worked on my old server- but I only tried it out post-install, it was hooked up to the card during install (For the record, networking on linux has *never* worked for me if I installed then plugged in the networking stuff after the fact). So I just used the card instead. Transferred the hard drive into a new machine, and lo and behold, it would only work after I transferred in the card from the old one. What I wanted to set up is a basic NAT system, where the network connection is routed through from my server to my main desktop- but when I run ifconfig, my card is not detected, just lo and eth0. How can I fix this?

View 3 Replies View Related

CentOS 5 Networking :: NVidia Corporation MCP79 Ethernet Card Not Detected In MAC Mini?

Feb 26, 2010

I have installed trixbox 2.8.0.3 in Intel MAC mini PC, installation completed successfully. After reboot network card was not detected.

My MAC mini PC comes with nVidia Corporation MCP79 Ethernet card. how to enable Ethernet card with out affecting the tribox. trixbox-2.8.0.3 version comes with Cent OS 5.4. [Moderator edit: s/deducted/detected/]

View 5 Replies View Related

General :: Ethernet Card Not Getting Detected?

Feb 22, 2011

I have installed fedora core 8 on my system. But i am unable to use LAN connection. here are the results of some of the commands which give error messages

[root@localhost ~]# lspci | grep -i ether
00:19.0 Ethernet controller: Intel Corporation Unknown device 10f5 (rev 03)
[root@localhost ~]# uname -a

[code]....

View 11 Replies View Related

Debian Installation :: No Ethernet Card Detected

Jul 28, 2015

I am installing Linux for the first time right now and I am facing a bit of an issue when it comes to network hardware driver installation. The NIC on my motherboard is a Marvel 88E1111 (computer is very old). During the installation of Debian, I got to a menu which read "No Ethernet card detected. If you know the name of the driver needed by your Ethernet card you can select it from the list", then provides me with said list of driver names.

However, the only driver I could find that came close the NIC I am using was one called just "Marvel", and selecting actually didn't do anything (screen flashes blue and returns me to the same menu). So I continued by selecting the "none of the above" option, and now the new menu reads: "A driver for your hardware is not available. You may need to load drivers from removable media (...)". So I thought I should google for the drivers and see what I can find. The official site of the company that made my NIC doesn't even list my model in their drivers' list (to be expected since it is so old).

Then I found this: URL.., but I was expecting more of a download than the source code itself.

View 2 Replies View Related

Fedora Hardware :: Ethernet Card Not Detected In 14?

May 31, 2011

i have newly bought Desktop system with the following configuration:

1)intel DH67vr mother board with i7 microprocessor inserted
2)1000Gb hdd
3)Dvd Drive
4)Nvidia graphics card -1Gb

i successfully installed Fedora 14 in that machine.though the mother board has inbuilt LAN port,it is not detected by fedora14.

View 4 Replies View Related

General :: Ethernet Card Is Not Detected On System RHEL 5.1?

Jun 21, 2010

I install RHEL 5.1 on my system. But my Ethernet card is not detected. I found my Ethernet card is of "ATTANSIC Technology corp L1 Gigabit Ethernet Adapter(rev b0). I already downloaded the driver. Someone tell me step by step process, how to install this driver over RHEL 5.1.

View 2 Replies View Related

General :: NVidia Nforce Ethernet Card Not Detected In RHEL 5

Jun 8, 2010

I use an nVidia nforce MCP73 ethernet card on Red Hat Enterprise Linux. It is not getting detected and hence I'm unable to configure my network.

View 14 Replies View Related

Red Hat / Fedora :: Ethernet Card Not Detected In Red Hat 5.3 In Dell Inspiron 1525 Laptop

Jun 14, 2010

i have installed red hat 5.1 on my dell inspiron 1525 laptop.It is not detecting any ethernet card.driver is marvel yukon 88E8040So far i found this package to be installed kmod-sk98lin-PAE-10.70.7.3-2.el5.elrepo.i686.rpm but it is showing me the dependencies problems..

View 4 Replies View Related

Ubuntu Networking :: Usb To Ethernet Device Not Detected / Enable This?

Jul 28, 2011

I'm using ubuntu 10.04 enterprise cloud server for my project. I use USB NIC to interface with other 2 servers. but the system doesnot detect USB NIC. detect & configure USB NIC in the network.

View 5 Replies View Related

Fedora Networking :: 14 Can't Connect To SpeedTouch 585 - Either Wireless Broadcom Card Or The Wired Ethernet Card

Dec 4, 2010

Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.

I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.

Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.

Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.

View 6 Replies View Related

Ubuntu Networking :: Atheros AR8132 Ethernet No Longer Detected?

Mar 1, 2010

I have an absolutely bizarre hardware issue (concerning the Atheros AR8132 PCI-E Fast Ethernet Controller) that has been giving me quite a bit of grief for a while, and having completely hit a wall on this one, I'm a reasonably-experienced Linux user of several years, and have been running Ubuntu 9.10 on an Acer AOD250 netbook for several months out. I know that this model has wireless issues out-of-the-box (easily fixed), but it did not have any noticeable ethernet issues. That is, until I attempted an installation of Arch Linux.

During the Arch Linux installation, the ethernet card was initially detected, but unable to be used (because of a bad module in the kernel released with the installer). As I didn't know the fix for this at the time, I decided to reinstall Ubuntu 9.10. This time, however, the system failed to recognize the wired ethernet whatsoever. Instead, the external activity lights for the port (green and orange) are ALWAYS on, yet the device doesn't function.

I have done a successful install of the latest drivers directly from Atheros for the device and have them automatically loading with the kernel during boot, but as the device isn't recognized, the drivers aren't doing any good. Relevant information:

Code:
root@niobium:~# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)

[Code]...

View 3 Replies View Related

Ubuntu Networking :: No Network Interfaces (neither Ethernet, Nor Wireless) Detected?

Mar 2, 2010

Problem:I got a new Acer Aspire 8935G notebook, installed Ubuntu 9.10 on it and everything is fine, except the fact, that it wont detect any network interfaces (or how to call it So there are no ethernet or wlan connections available in the network-manager..

lspci gives me following lines:
joe@IGNAZ ~ $ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev

[code]...

View 9 Replies View Related

Ubuntu Networking :: Can't Get Connection For Second Ethernet Card

Jun 6, 2010

I'm trying to set up a shared Internet connection that had been broken by a previous update, I believe. Eth0 is connected to the Internet, whereas eth2 should be the connection going to my Roku set-top box. Under the nm-applet icon, an entry exists for "Auto eth0" for the first card, but there is nothing under the second card except "disconnected". How do I make a connection entry under my eth2 card so that I can share my Internet connection with my Roku box?

View 6 Replies View Related

Networking :: LAN Card Not Detected

Jun 27, 2010

I have a dual boot with W'XP and RHEL 5. M/B is MSI.

In XP the LAN is detected but not in LINUX.

View 2 Replies View Related

Ubuntu Networking :: Network Card Not Detected?

Apr 4, 2010

I have bought a new laptop with W7 installed. And I installed dual boot with Ubuntu 9.10 on it.I tried to connect my laptop to Internet by Ethernet port. It works with W7, but Ubuntu doesn't detect my Network card .After some research on Internet, I suppose that it's a problem of drivers for this card.Here some parameters I could get :

>ifconfig :
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0

[code]...

View 4 Replies View Related

Ubuntu Networking :: Wireless Card Isn't Being Detected

Apr 30, 2010

I have just upgraded from 9.10 to 10.04 and now my wireless card isn't being detected as far as I know. It was working perfectly in the previous version. At the moment I've physically put an ethernet cable straight to the router.

[code]...

View 9 Replies View Related

Ubuntu Networking :: Network Card Not Detected

Jun 16, 2010

I'm in serious need of some help. The network adapter on the motherboard of my main machine apparently failed about noon today. This machine serves as the firewall and router for my home office LAN, and so it has two network adapters, the second being a PCI card installed in the only PCI slot of the mobo. The mobo's adapter served the WAN while the PCI card serves the LAN.Since the mobo has only one PCI slot, none of the other PCI cards I have on hand could be used. Instead, I pulled an unused PCI-e dialup modem card from the machine, and bought a PCI express gigabit card to put in its place.

The problem is that the machine (running Hardy 8.04.4 LTS) does not recognize the new card at all. Running lspci shows only the old PCI card that serves the LAN. Similarly, running "sudo lshw" shows only the old PCI card together with a virtual adapter that's part of my VirtualBox installation on that system.I then dual-booted into Vista Home and attempted to install the new card there, using the CD that came with it. Vista detected the card and asked for the disk, but then was unable to find any drivers on the disk!The box says the card is from Star Tech, and the instruction sheet says its model is ST1000SPEX.If anyone can point me to the correct module to add to the startup list and/or remove from the blacklist, that may get me going again.

View 3 Replies View Related

Ubuntu Networking :: Wireless Card Not Detected

Jun 18, 2011

I bought a new TOSHIBA C660 - i5010 today and installed.Lucid Lynx 10.04 on it, but it has not detected my wirelessg broadcom 80211 (STA) driver debp interface.

View 1 Replies View Related

Ubuntu :: Share Internet From 1st Ethernet AND To 2nd Ethernet And Wifi Card?

Feb 8, 2011

I am basically wanting to use my Ubuntu 10.10 computer as a router. Note: Before you say just get a router please note that I am poor/cheap. I have two ethernet connections and one wireless connection on my netbook. I want to share the internet connection that is going into one of the ethernet cards through the other ethernet card and the wireless card.

DSL-->1sr Eth --> 2nd Eth (currently works)
DSL-->1sr Eth --> Wireless Card (Adhoc) <--(connects with limited connectivity AKA no internet)

The 2nd Ethernet card already has working internet, but when I connect to the Wireless card (through an Adhoc network), it cannot get an IP (I believe).

View 2 Replies View Related

Networking :: Multi Ip In One Ethernet Card?

Apr 24, 2010

can one ethernet card support multiple ip address? but i think it's very dangerous. if bad guy take many ip, other people can't get ip. "does one ethernet card take multiple real ip or multiple virtual ip(one real ip)?" if it takes multiple real ip, then how it works good?..

View 7 Replies View Related

Ubuntu Networking :: 9.04 Recognizes Ethernet Card But Won't Connect

May 6, 2010

I own a D-Link DI-604 wired router and I've started getting some issues after Ubuntu 9.10 to 10.04 upgrade(Ubuntu 9.04 used to work OK!). The problem is that Ubuntu recognizes all my ethernet cards (see below), but I can only connect to the internet through eth1 not eth0 (which is my Windows default). If I try to plug the cable in eth0 nothing happens (at least not in Ubuntu 10.04 and 9.10).

Code:

lucas@lucas-desktop:~$ sudo lshw -C network
[sudo] password for lucas:
*-network:0
description: Ethernet interface

[code].....

View 9 Replies View Related

Ubuntu Networking :: Unable To Get PCI Ethernet Card Working Under 9.10

May 20, 2010

I have just installed a generic PCI ethernet card into a fairly low powered system (Celeron 766MHZ, 512mb Ram, 40 Gb HDD, Generic sound and video). The card came with no drivers. I have since installed Ubuntu 9.10, and up to a point everything is fine and looks great. However when I connect an ethernet cable up to the PCI card (in the hope of connecting with the Internet), nothing happens. I am thinking that I need Ubuntu drivers for the PCI card ? or does Ubuntu 9.10 come with drivers and I need to go into the 'engine room' to sort it all out ?

View 1 Replies View Related

Ubuntu Networking :: Cheapest, Most Compatible Ethernet Card?

Jul 2, 2010

I've had way too many problems with my network card under linux and I'm looking to buy a new one because the money is worth the lack of headaches. My project: I'm breathing new life into my old, old pentium 4 computer by running Kubuntu Server on it and using it as a little samba filedump.

So I don't want to spend a lot on an ethernet card -- this computer is no prize. I just want the cheapest, most out-of-the-box-compatible-with-no-configuration card I can buy.

I started on Newegg (sorted by price: [URL]....CE&PageSize=20 ), and I've heard that cards based on the RealTek 8129/8139 chip may be compatible/cheap but I can't seem to find out ahead of time what chip the cards are based on.

View 6 Replies View Related

Ubuntu Networking :: Ethernet Card Not Working In 10.04 Server

Jul 18, 2010

I've set up 10.04 Server so that I could install directly to a command line, due to the fact that Desktop was crashing during the install every time. The installation goes fine, except for the networking portion. DHCP fails every time I try it. So I set up a static IP as an alternative. Once installation completes, none of the network-oriented tools (ping, telnet) work. I've tried pinging my router and I get 'Destination Host Unknown'. This is true if I change to a DHCP oriented setup as well.

The router sees that the machine is there, as indicated by the slowly blinking connection light meaning that it's hooked up to *something* but there's no activity. Also, networking did work within Windows before I nuked it, so I know it has the ability to operate correctly. I'm at a loss, mostly due to my own newness and ignorance of how to start tackling this within this environment.

View 9 Replies View Related

Ubuntu Networking :: Replacement Ethernet Card Not Working

May 9, 2011

The on-board NIC on my machine died this morning, so I've just gone out and bought a replacement PCI card. The card has been recognised by Karmic, but it's not working. /var/log/messages says:

Code:
May 9 11:21:58 ian-desktop kernel: [ 2.082324] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
May 9 11:21:58 ian-desktop kernel: [ 2.082334] r8169 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[Code]....

how I install the appropriate driver (noting that I have to sneakernet files across via usb stick), or any other diagnostics I should try?

View 2 Replies View Related

Networking :: PCI Network Card Not Detected As It

Aug 27, 2010

I added to my machine PC running debian and others, ubuntu, pc wireless card:,the same card I used it on other machine, it ran nice.On the other machine i have Ethernet Controller instead of Class ffff.I installed the divers firmware-ralink and other realtek and network-manager, but nothing.on other machine, that was enough to run it correctly.and ifconfig dosn't give wlan0,iwconfig did't give characteristic of wlan0.does this mean that the bios didn't recognize it as a network card

View 3 Replies View Related

Ubuntu Networking :: Wireless Card Detected But Disabled

Mar 1, 2010

im having some trouble connecting the wireless card to my wifi network, theres is a hint using the terminal

remora@remora-laptop:~$ sudo lshw -C network
[sudo] password for remora:
*-network DISABLED
description: Wireless interface

[code]....

View 6 Replies View Related

Ubuntu Networking :: Network Card No Longer Detected

Aug 27, 2010

I have a Realtek gigabit onboard ethernet (RTL-8110SC/8169SC)It was working in 9.10.After upgrading to 10.04, the connection dropped to 10MB. Now, lspci -v shows the card, but Ubuntu no longer recognizes eth0!I have no connection on the machine. I've been digging around the forums, but can't seem to find what I need.

View 2 Replies View Related

Networking :: Connect Using An Ethernet Card Using Dhcp ?

Feb 15, 2010

My ISP finished some 'upgrades' on its infrastructure. The result is that I am having great difficulty in connecting to the internet.

I have 3 operating systems on my box - XP, Fedora 8 and Feota 12.

I connect using an ethernet card, using dhcp. In fedora 12, the ethernet card is controlled be networkmanager. After the ISP completed their upgrades, I was not able to connect. I tried to connect manually using

Code:

There was an error message -

Code:

I read the advice here: [url], and removed all but the important lines.

But even after that neither ifup eth0 or dhclient eth0 works.

In fedora 8, the ethernet card is activated by ifup eth0 in /etc/rc.local. I was able to connect on a couple of occasions, but that too stopped working. I tried both ifup eth0, dhclient eth0, and tried to use the gui( which fires the dhclient command), but none worked.

When I use windows, it takes about 2 minutes to get an ip (earlier it was immediate). Sometimes that doesnt work and I have to click on "repair" whereupon it starts working.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved