I have a few things working now, so all I need to know is a good way to record the music you play from Virtual Keyboard. I've tried Audacity to do this, but it never works correctly.
View 6 Replies
As an arranger of collegiate a cappella music, I often times need to listen to a song as I'm playing with a midi sequencer or some arranging software. On Ubuntu, since Gutsy, I've often run into the same problem from distribution to distribution:
Midi and audio won't work at the same time. If I have an audio file open on VLC or FireFox, I can't play Midi sequences on my arrangement. If I'm arranging and listening to Midi notes, I can't play music. Note that it's incredibly inconvenient to constantly close one so I can play the other to finish arrangements.
my dad is wanting me to make a slideshow for him. all it has to be is just a different picture every 4 or 5 seconds, with captions in-between them. i remember i could very easily do this with windows movie maker, but is there a program for ubuntu that i could use that is the same?
View 3 Replies View RelatedI need a replacement for Windows Movie Maker.Specifically, I need to combine STILL images with sound ...
View 4 Replies View Relatedrecommend a good slideshow maker that'll make great slide shows to be used on a web page?I need a slideshow maker that resides on my computer and not a web based one.
View 8 Replies View RelatedI am building a midi synthesizer that I'd like to be able to control from linux. I know its a rather broad question, but, how do I go about this? At this point the hardware consists of a simple UART bridge, and I've already written a simple C++ program using termios to send the raw midi data to the device. Obviously I don't want to write a player/sequencer from scratch, so where should I start if I wanted to get this thing to work with, say, a sequencer like rosegarden? Do I write the driver for rosegarden, or hook into alsa or what?
View 1 Replies View RelatedOnly place where i need midi is mainly when using Tuxguitar. I tried tuxguitars settings, but it shows only tuxguitar sequencer and midi-through port 0. Haven't done this before so i really don't know where to start from..?
View 2 Replies View Relatedhow to make creative web cam working with ubuntu
View 1 Replies View RelatedI can't get flash controls to work. If the video auto-plays, it starts just fine, if not, I'm out of luck. I've tried reinstalling flash through the software center. Even if it autoplays, I can't control volume or pause or anything. I'm at the mercy of whatever is already there.
Ubuntu Karmic 9.10 - all updated as of 1/2/2009
Firefox 3.5.6
On a Lenovo Thinkpad R400
I have Squeeze running gnome well.It connect to my WFI AP automatically.I installed window maker yesterday .After I enter the window maker desktop, I found no internet connection.I run a network tool shortcut in th eapplication menu.This program is the same of my gnome desktop.I change the setting to make it automatically connect to my AP but in vain.
View 12 Replies View RelatedHere's the problem of mine: I cannot make my EMU10k1 based sound card (Audigy 2 ZS) to play midi.
What I tried to make it work so far:
1. Install sound fonts: unison.sf2 and FluidR3_GS.sf2
2. Use asfxload to load these soundfonts.
3. Check if they are truly loaded:
Code:
user@computer: cat /proc/asound/card0/wavetableD1
Device: Emu10k1
Ports: 4
Addresses: 17:0 17:1 17:2 17:3
code....
I am trying to hook up an external MIDI keyboard to Ubuntu (Studio) with no success. I can play MIDI files but not get the s/w to reguster any events from the MIDI keyboard. I have a soundblaster LIve! with front panel and am usng the MIDI in on this, with a ROland PC-300 kybd. Headphones work fine on the panel so I know this has been connected OK. The software (Rosegarden) 'sees' the keyboard as in input device but nothing happens when I play.
View 3 Replies View RelatedMIDI does not work in GNU/Linux.It doesn't work, due to the fact that the only free soundfont I've come across.I've searched around a lot and come up with nothing, any ideas?the only solution is to pay for a soundfont, then fine, just tell me the name of a soundfont that will work without any hacking and/or modification or patches with Timidity.If not even a (payware) soundfont like that exists -- if my only option is to buy something else than Timidity, that comes with its own proprietary soundfont, then please tell me the name of that, I'm tired of this.
View 6 Replies View RelatedI have been researching this for a few days and I am getting nowhere. All I want to do is play midi files in Ubuntu 10.04 and also in Firefox. If I install, for ex. Rosegarden it will play the midi but without sound.I have timidity installed as well as mozplugger. From the start midis partially work in Totem, but the sound is far from right.
I never had this much of an issue with midi before, really starting to irritate me.Is this a pulseaudio issue? I really don't feel like playing around with jack either, never have luck with it. It seems that installing timidty should have allowed me to play midi files on my computer.
Currently enjoying TuxGuitar, but I was wondering if there is a way to use some sort of Creative Commons drum kit samples instead of the current MIDI drums. Also would like to use some sort of synth or samples for guitars. I have looked for tutorials on this, but have not found anything yet.
View 2 Replies View RelatedI installed a minimal Ubuntu install, and I can't get my MIDI to work. I have timidity installed, alsa-utils, freepats, jackd, and jackd2 installed. As for my sound card:
Code:
me@lappy486:~$ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
I'm running Ubuntu 10.04 with the Kubuntu desktop environment. I'm trying to use my MIDI keyboard through ALSA, Linuxsampler and Qsampler. But I still haven't got a sound out of it, and I fear that the information about the existence of the keyboard doesn't get through. That, or I don't know how to configure properly.
In sndstat, both my sound card (Guitar Rig) and my keyboard (Hua Xing) is showing up:
Quote:
cerapter@Ancalagon:~$ cat /dev/sndstat
Sound Driver:3.8.1a-980706 (ALSA v1.0.21 emulation code)
Kernel: Linux Ancalagon 2.6.32-26-generic #48-Ubuntu SMP Wed Nov 24 10:14:11 UTC 2010 x86_64
Config options: 0
[Code].....
I am looking for a software that would allow me to build rhythms, adding one percussion sound after another. Ideally, it should be possible to connect it to external MIDI device for recording and playing back the recorded notes.This would go something like this: I set up a rhythm, say, 4/4, and I hear metronome sound that hints about the pace. I have a percussion voice selected on my synth, and whenever I press a key on the keyboard, that sound is recorded on my PC, registering it's position in the pattern. PC is repeatedly playing back the recorded sequence, so I can enrich the beat with more and more instruments. When the job is done, I'd save the created sequence in MID file, and use it later.
I have installed Rosegarden on my Ubuntu, and it might well be that it has such mode that does exactly what I'm looking for, but since Rosegarden doesn't seem to have official forum (only newslist, but I am now reluctant to sign me up to just another newslist), I wanted to check in this forum, maybe someone knows right away. At least, I have succeeded playing MID files via Rosegarden to my synth,and recording from synth to the Rosegarden interface, and save the result in MID file.
I have a problem playing MIDI files on my system: I tried opening two MIDI files in Audacious, VLC, Aqualung and Rhythmbox, and Rhythmbox is the only one that will play them:
- Audacious crashes when clicking on the file in the playlist (immediately disappears)
- Aqualung doesn't add them to its playlist
- VLC produces an error msg saying it can't play MIDI
- Rhythmbox plays a MIDI file and immediately crashes at its end
I'm on Ubuntu Karmic 64 and have timidity installed.
I'm running Ubuntu 9.10 rt (realtime) kernel on a Dell box and trying to hook it up to a Yamaha P-80 keyboard. I'm not sure how to figure out what kind of MIDI cable I'm using. But I haven't been able to get the keyboard to play or write music on my Ubuntu or on Windows XP.
1.) How can I give you more information about my system?
2.) How can I test if it's working properly?
Question moved to the Studio area as I didn't know about it!
View 1 Replies View RelatedI'm not sure what the technical term for the thing that creates midi sounds. Is it the midi sequencer? or midi driver?Regardless, I'm unhappy with the tones ubuntu produces for its drum midis. Does any one know how to change which tones it uses? I use lilypond to write percussion music and it can be easily translated into a midi file. I like to do this so that I can hear how the music sounds in real life and many mistakes.Unfortunately the toms are painfully low and hard to distinguish.
View 2 Replies View RelatedI'm under Ubuntu 8.04 LTS Hardy Heron using pulseaudio. I've got 2 soundcards : one internal AC97 7.1 without midi (card 0 in ALSA) and a PCI C-MEDIA 2.1 with OPL3 midi (card 3 in ALSA) I have sound in most ALSA or OSS applications with full 7.1 + 2.1 duplex. I have MIDI playback in any ALSA MIDI players (client 29:0 in ALSA).
I'm trying to run Final Doom for W95 on WINE with OSS driver. I have sound effects but no MIDI music. I tryed with padsp and aoss wrappers. I know I can use ALSA driver in wine or timidity, but I would rather use padsp + hardware MIDI if possible. How do I configure ALSA OSS emulation for MIDI playback and check that it's working ? I tryed playmidi but whatever I told it, it couldn't find any midi device.
I have switched from windows in the past few months and have solved all my issues with Ubuntu so far. The only problem I still have now is that I can not play midi files on my piano through Ubuntu. This is the piano I have: [URL] When I had windows, I used Dell Latitude c600, Van Basco's software: [URL] and one of these USB-midi cables: [URL]
to play my midi files on the piano. In ubuntu 9.1 I can play the midi but only through the laptop. It does not get sent to the piano. I'm new to Linux but can follow direction. Hate to be going back to windows. Installing Van Basco through wine keeps crashing and does not work.
I just switched to Ubuntu 10.04 and I'm looking for a way to be able to play piano with my M-audio Keystation 88es keyboard.In Windows I use the amazing Synthogy Ivory piano sounds. Is there anything similar in linux? everything up? I followed different instructions on how to setup Jack to make it work and it can see the keyboard but I wasn't able to get any sound out of it.My computer has the Asus built-in sound card and I also have a separate M-audio Audiophile 192 sound card.
View 1 Replies View RelatedI tried LMMS but just can't get the sounds correctly, it sounds mushy no matter what setting i put in it.Can you recommend me some other software?
View 1 Replies View RelatedI am using ubuntu 9.10 (kernel 2.6.31-9-rt) and an M-Audio Delta 1010 PCI sound card, and trying to get MIDI inputs and outputs to work on this sound card.I have Jack installed and working. MIDI signals from virtual keyboard or a MIDI player can be routed to fluidsynth, and fluidsynth's audio can be played back through the outputs of the delta 1010.I can use a MIDI sequencer (e.g. rosegarden or qtractor) to record MIDI from virtual keyboard, with jack handling the routing.
But, no matter how I configure the connections in jack, I can't get any signals from the "MIDI In" port on the sound card.Does anybody have some thoughts on how to fix this? Where is the disconnect between the delta 1010 and qtractor? I am concerned also that the "MIDI In" LED on the front panel of the Delta 1010 never blinks. There must be some basic ALSA configuration that needs to be done to activate and use these MIDI ports, or something. I've been trying to figure it out for days.
Can't play midi files on my Dell Inspiron 1300. Do I need another application?
View 4 Replies View RelatedI'm new to ubuntu but i do have a basic understanding of programming, but nothing too serious. The reason I am mentioning this is because I have a little project. Currently I use JACK to control the transport of all the aps i use to make music with ardour, hydrogen and rosegarden mainly. I also have an external midi drum machine that I sometimes hook up into the mix via midi in/out, my drum machine (yamaha ry to be exact can send and receive midi data. My question is can I use the transport controls on my external drum machine to control JACK's transport controls? If there is already am app that does something like that, excellent!
View 3 Replies View RelatedI cannot seem to make the two work together. I try to config Amarok and change the media devices, however, there is no option called "media devices."
View 3 Replies View Related
