General :: External MIDI Does Not Work
Feb 8, 2010
I am trying to hook up an external MIDI keyboard to Ubuntu (Studio) with no success. I can play MIDI files but not get the s/w to reguster any events from the MIDI keyboard. I have a soundblaster LIve! with front panel and am usng the MIDI in on this, with a ROland PC-300 kybd. Headphones work fine on the panel so I know this has been connected OK. The software (Rosegarden) 'sees' the keyboard as in input device but nothing happens when I play.
View 3 Replies
ADVERTISEMENT
Feb 3, 2010
I am trying to sync up my Yamaha AW4416 daw to ubuntu studio 9.10 in order to use drum and midi sounds. I have tried using MTC and midi clock slave and master but to no avail.I am using an Edirol UA-25 usb soundcard with the advance switch on to enable midi.
View 1 Replies
View Related
Feb 3, 2010
I am trying to sync up my Yamaha AW4416 daw to ubuntu studio 9.10 in order to use drum and midi sounds. I have tried using MTC and midi clock slave and master but to no avail.
I am using an Edirol UA-25 usb soundcard with the advance switch on to enable midi.
View 1 Replies
View Related
Oct 16, 2010
I'm new to ubuntu but i do have a basic understanding of programming, but nothing too serious. The reason I am mentioning this is because I have a little project. Currently I use JACK to control the transport of all the aps i use to make music with ardour, hydrogen and rosegarden mainly. I also have an external midi drum machine that I sometimes hook up into the mix via midi in/out, my drum machine (yamaha ry to be exact can send and receive midi data. My question is can I use the transport controls on my external drum machine to control JACK's transport controls? If there is already am app that does something like that, excellent!
View 3 Replies
View Related
Jul 31, 2011
I am building a midi synthesizer that I'd like to be able to control from linux. I know its a rather broad question, but, how do I go about this? At this point the hardware consists of a simple UART bridge, and I've already written a simple C++ program using termios to send the raw midi data to the device. Obviously I don't want to write a player/sequencer from scratch, so where should I start if I wanted to get this thing to work with, say, a sequencer like rosegarden? Do I write the driver for rosegarden, or hook into alsa or what?
View 1 Replies
View Related
Dec 10, 2010
Only place where i need midi is mainly when using Tuxguitar. I tried tuxguitars settings, but it shows only tuxguitar sequencer and midi-through port 0. Haven't done this before so i really don't know where to start from..?
View 2 Replies
View Related
Mar 23, 2010
MIDI does not work in GNU/Linux.It doesn't work, due to the fact that the only free soundfont I've come across.I've searched around a lot and come up with nothing, any ideas?the only solution is to pay for a soundfont, then fine, just tell me the name of a soundfont that will work without any hacking and/or modification or patches with Timidity.If not even a (payware) soundfont like that exists -- if my only option is to buy something else than Timidity, that comes with its own proprietary soundfont, then please tell me the name of that, I'm tired of this.
View 6 Replies
View Related
Mar 27, 2010
I have a few things working now, so all I need to know is a good way to record the music you play from Virtual Keyboard. I've tried Audacity to do this, but it never works correctly.
View 6 Replies
View Related
Jul 27, 2010
As an arranger of collegiate a cappella music, I often times need to listen to a song as I'm playing with a midi sequencer or some arranging software. On Ubuntu, since Gutsy, I've often run into the same problem from distribution to distribution:
Midi and audio won't work at the same time. If I have an audio file open on VLC or FireFox, I can't play Midi sequences on my arrangement. If I'm arranging and listening to Midi notes, I can't play music. Note that it's incredibly inconvenient to constantly close one so I can play the other to finish arrangements.
View 3 Replies
View Related
Oct 6, 2009
I have a FAT32 external USB hard drive with a bunch of stuff I want to copy onto a RHEL server. Is it as simple as it is on a Mac or PC where I just plug it in and it will show up, then I can copy all the files off of it?If it is, how do I safely remove the drive after I'm done with it?
View 5 Replies
View Related
Jul 18, 2010
I just bought an M-Audio Keystation 49e off of craigslist and I'm at a bit of a loss on where to start to use it as an input device for muse or rosegarden.
Distro: Debian Lenny
Kernel: 2.6.26-2-686
Laptop: Compaq V5305WM
Everything seems setup, but I'm at a loss on how to use it in the applications. It doesn't have any sound synthesis abilities on the keyboard, it's just an input device. Without the keyboard I usually go this route:
jackd -R -d alsa &
timidity -Oj -iA &
rosegarden
And midi events output sounds and all that jazz. I'm wanting to input notes / record from the keyboard. But still output all sounds in the aforementioned manner. If I could get those to happen while I record that would help a bunch. Maybe it's just too late in the day for me to wrap my brain around it at the moment.
[Code]...
View 7 Replies
View Related
May 22, 2011
I could not get get the LG External CD R/W Drive that I recently purchased to work with my ASUS Eee Netbook (Linux based) and ended up giving the drive to a friend to use with his Windows XP based laptop.How do I make an External CD R/W Drive work with this Linux-based machine?I am an engineer (civil-structural), but not that savvy with respect to computers; particularly issues of compatibility of hardware / software.
View 2 Replies
View Related
May 10, 2011
I would like to know how I can play a midi file in Slackware command line. I write "aplaymidi -p (port number) file.mid" and I see that it is working, but I can't hear anything. As I have Windows XP in a computer and Windows 7 in another, I have to convert the midi files into wave files in order to listen to them in Slackware using play. There is another thing that I haven't ever been able to do in spite of the fact that I have had Slackware installed in my computers since 2002, and this thing is: I have never been able to connect Internet using Slackware or any other Linux distribuition. I like Linux very much but I am frustrated at not being able to do these two things: to play a midi file in Slackware and to connect Internet.
View 6 Replies
View Related
Sep 6, 2010
I can't hear MIDI music playing on a website (my blog) because I lack a plugin for it. Is there a plugin for that that works in Linux?
View 1 Replies
View Related
Dec 27, 2010
I have an external hard drive with an xfs partition on it. It was using an external journal, but in re-installing Slackware I removed the partition holding the external journal, forgetting what it was at the time. I didn't touch the contents of the external hard drive, but now I can't mount it and the various xfs programs seem to demand that it be mounted in order for them to change anything.Anyone have any ideas on how to change an xfs partition from external log to internal? Failing that, how do I get the information off it?
View 1 Replies
View Related
Dec 11, 2010
I plugged in my external dvd-r (asus) via usb. It showed me some message on shell, that it has detected the cdrom(although its dvd rom as well but nevermind) and its of ASUS. But how do i know which dev it was associated with in /dev/? Since i had to test something, i plugged it out, and save the output of ls /dev/ > ~/result.txt
after plugging the dvd-rom, i compared the results and was able to find that it was associated with simple cdrom i.e. /dev/cdrom. I wanted to know that is there any command that will tell me which /dev/ file was associated with external dvdrom? i tried to see in the following result
1) df -h ( no results, just the already mounted partitions)
2) fdisk -l ( same as above)
3) dmesg | tail (shown almost the same result as was shown on shell at the time of plugging the dvd)
View 9 Replies
View Related
Jun 27, 2011
Anyone using a WD 2TB external USB HD? (e.g model number WDBAAU0020HBK-UESN)I am thinking of getting one for use with 64 bit Lucid for archive/backup storage only.from searches I have run the main cause of problems seems to be not applicable to the way I intend to use it i.e running a OS from it or having it mounted on boot up.I Just need it to act like a very big USB stick. Plug it in - transfer data to it (or from it should the need arise), unmount and remove.If I can use it on any of my 3 Lucid systems that will be good but just one will do.Will the NTFS system that this unit is preformatted with be OK? any other possible problems?
View 4 Replies
View Related
Jul 23, 2010
I am running an Ubuntu 10.4 box with all ports forwarded on an internet router. The point is I can ping my PC with its external IP but no other services are accessible through it. I have also checked my iptables rules. It's completely flushed and the default rule is set to ACCEPT. The worst thing is that when I boot my box with windows XP, it is completely accessible by its external IP and I could successfully initiate a remote desktop connection to it over the net.
View 4 Replies
View Related
Aug 14, 2010
External USB TV device to work on 10.04 I have an External USB TV tuner[URL] Device,That is Compatible with Windows.Is there any way to make it work with UBUNTU 10.04.
View 7 Replies
View Related
May 7, 2010
can just buy any External Hard Drive and it will work on ubuntu 10.04? If not could you tell me the brands that do Work.
View 2 Replies
View Related
Jun 20, 2010
Script doesn't work anymore? I created a script that mounts an external hard drive.
#!/bin/sh
mount -t smbfs //192.168.1.104/MediaShare /mnt/MediaShare
mount -t smbfs //192.168.1.104/Backup /mnt/Backup
It is in my startup and has been working fine. I recently upgraded to 10.04 Ubuntu and I don't know if this has anything to do with it. A while after the upgrade something changed. Normally when booting up a permission screen for the scrip would pop up, I would enter the password, and it worked. But suddenly it started going past the login for the script and the mouse could not click on anything. I discovered that I could press alt-o and the mouse worked again. And I would activate the script in terminal and it would work. Why this would suddenly change and what I can do to get the script working again.
View 1 Replies
View Related
Dec 27, 2010
I have Windows 7 and Ubuntu 10.10 on my Toshiba laptop. In windows everything is fine but in ubuntu if i plug in external speakers they do not work. Even when the external speakers are plugged in the laptop's internal speakers keep working. I searched for other forums but could not find a solution although many people seem to have this problem.
View 4 Replies
View Related
Sep 1, 2011
I want to buy a new external USB hard disk drive, and my eye was drawn by the 1TB CORE External Desktop USB 2.0 Very appealing was the comment "Plug n Play - no software to install". But then I noticed the sentence: "Includes DES lock - Protect all your important files." This set the alarm bells ringing. If the drive comes with a DES protection lock, is this likely to work with Ubuntu? Or is it going to be a Windows-only thing, locking me out cos I don't use Windows?
View 9 Replies
View Related
Aug 17, 2010
When my LaCie BigDisk E+ USB/eSATA FW:1.1548 is plugged into the USB port, I get the following what is below (it fails). This occurs in Ubuntu also. I think it has something to do with the new kernels. I believe ehci_hcd used to be a module. Since it has been compiled into the kernel, the external USB hard disk does not work. I am compiling my own kernel now to see if that is the problem.
dmesg | tail
scsi11 : usb-storage 1-1:1.0
usb 1-1: USB disconnect, address 14
usb 1-1: new high speed USB device using ehci_hcd and address 15
[code]....
View 3 Replies
View Related
Dec 21, 2009
I am using Open Suse 11.2 on my HP DV6 notebook. I am connecting my television to the notebook with a HDMI cable and the television is unable to find any signal. Am I missing anything here? Shouldn't it be simply connecting the HDMI cable finding the source channel on the television and then I get sound and picture..
View 3 Replies
View Related
Jan 14, 2010
Update 6th March 2010: Update to Kernel 2.6.31-20 SOLVED the problem. Recording works again (still wouldn't in kernels 2.6.31-17 to 2.6.31-19). If a kernel update doesn't solve your problem, please read post 14 on page 2 by Mocha which seems to have solved the problem for other users without updating the kernel
Update 8th February 2010 to Kernel 2.6.31-19 did not solve the problem, please also read post number 7 for more details.
Quick Conclusion for other users who might experience the same problem:
After an update to kernel version 2.6.31-17 in Ubuntu 9.10 Karmic Koala, my external microphone did not work anymore. Playback was possible, just recording would not work anymore, although there was quite some background noise in the headphones. This made it impossible for me to use Skype and/or Sound Recorder.
All the possible solutions offered below did not help in my case (although you might give them a try).
I switched back to kernel version 2.6.31-16 where the problem does not occur.
Output: cat /proc/asound/card0/codec#* | grep Codec
Realtek ALC662 rev1
I know there are lots of threads about this topic, but I have spent hours on this problem already and none of the solutions offered so far worked for me so I decided to start this thread.
I have been using Ubuntu 9.10 and so far, my external microphone worked flawlessly in Skype as well as in Sound Recorder. A few days ago, I received a call on Skype and all the guy on the other side could hear was loud noise. I can only play sound, but not record anymore (i.e. the microphone doesn't work anymore). I tried two different microphones just to be sure whether one was defective and also checked it in Windows (where they both work).
I am not sure what might have caused this problem, I just remember a kernel upgrade about that time (not sure whether this is the reason though). I use 2.6.31-17-generic now.
Here is what I have tried so far:
1) Right-click on the Sound Icon in the top right corner and checked the following: in the hardware tab, it is set to analog stereo duplex, input is set to internal audio analog stereo (no other choice here) and the mic is NOT muted (playing with the volume doesn't help either) and output is set to internal audio analog stereo (again, no other choice) and connector is set to analog output (here I can switch to analog headphones or analog speaker, but makes no difference).
I remember that I could choose between Microphone 1 and Microphone 2 in the input tab; this is somehow magically gone.
2) Installed padevchooser, tried several settings to no avail
3) When I use "alsamixer" (version 1.0.20) in a terminal, Playback>Master is set to 100<>100, Capture is set to 150<>150, lowering and/or playing with these figures doesn't help either.
When I use "alsamixer -Dhw:0" in a terminal, I get the same results as in step four.
4) In Gnome Alsa Mixer, only "Beep" is muted, everything else is set to max. I have Master, Headphon, PCM, Front, Front Mi (x2), Lin, Mic, Mic Boost, Capture (x2, set to record), Beep, Speaker
I have tried to mute/unmute different setting to no avail. Now I wonder why I have two Front Mi and two Capture entries. This is different than it used to be, might this be causing the problem?
5) Fiddling with Pulse Audio Volume Control didn't help either.
6) Had a look at "paman" (pulse audio manager), not sure whether I should change anything here.
7) Installed "linux-backports-modules-alsa-karmic-generic" and rebooted as recommended in several threads, did not help either.
Added the parameters "model=auto" and "probe_mask=1" to '/etc/modprobe.d/alsa-base.conf', did not work, so I deleted the entries again (hint from [url], see post 5)
Now I am at my wits end. I need my microphone to work, especially for Skype, otherwise I have to switch to Windows every time I receive or want to make a call which is definitely not a long-term solution?
Does anybody have an idea what might be causing this problem? As I said, it used to work flawlessly just a few days ago and now I don't even know what I should do next to make it work again...
Output of "amixer"
When I run "alsactl init" I get the following result which might be at least a part of the problem, but I wouldn't know how to solve this problem:
Unknown hardware: "HDA-Intel" "Realtek ALC662 rev1" "HDA:10ec0662,103c303a,00100101" "0x103c" "0x303a"
Hardware is initialized using a guess method
View 9 Replies
View Related
Jan 25, 2010
I've installed Linux to a portable hard drive with the assumption that I would be able to transfer that hard drive to my other computers and be able to boot into Linux from them. I know for a fact that these computers are capable of running the same linux installed on the portable HDD via LiveCD or LiveUSB flash drive.
However, when I try to start my portable hard drive on any computer other than the one I installed it on, it boots to a black screen and stays that way indefinitely.
So, I would like to know how to make my portable hard drive more versatile, and to automatically adapt to different computers during boot.
View 6 Replies
View Related
Aug 31, 2010
I have a hard time mounting two external drives on my Suse 11.3. When I use the device notifier gadget both drives get mounted in /media/<drive name>, the vfat drive is read-only though. However, I would like to mount both drives under /<drive name> in separate directories and rw. I looked at the devices in /dev/ and entered the device name to fstab, set the mount point, file system (vfat, and ntfs-3g) and set 'rw,noauto,exec,user,sync 0 0'.
This way I could mount my vfat drive read-only under /<drive name>, but not the ntfs one. After a reboot i noticed that the external drives get different IDs in /dev. E.g. what I had in my fstab under /dev/sdc1 got /dev/sdf1, and /dev/sdc was unknown. I am doing something wrong here, what worked in 11.0 does not seem to work here.
[code]...
View 2 Replies
View Related
Apr 14, 2010
Trying to get external microphone to work via CMI 8738 soundcard. Using SuSE 11.1, KDE 3.5, (No pulse). Mic works on other computer. rpm -qa '*alsa*'
alsa-oss-1.0.17-1.37
alsa-1.0.18-8.12.1
alsa-utils-1.0.18-6.4
alsa-plugins-1.0.18-6.12
[Code]...
View 3 Replies
View Related
Apr 30, 2011
Recently i bought an external HDD, and unfortunately my internal HDD is not working.
Instead of buying new internal HDD, can i make external HDD work as internal HDD.
View 6 Replies
View Related
