Ubuntu Multimedia :: 10.04 Midi Not Working Still
Jun 4, 2010
I have been researching this for a few days and I am getting nowhere. All I want to do is play midi files in Ubuntu 10.04 and also in Firefox. If I install, for ex. Rosegarden it will play the midi but without sound.I have timidity installed as well as mozplugger. From the start midis partially work in Totem, but the sound is far from right.
I never had this much of an issue with midi before, really starting to irritate me.Is this a pulseaudio issue? I really don't feel like playing around with jack either, never have luck with it. It seems that installing timidty should have allowed me to play midi files on my computer.
View 1 Replies
ADVERTISEMENT
Mar 4, 2011
I installed a minimal Ubuntu install, and I can't get my MIDI to work. I have timidity installed, alsa-utils, freepats, jackd, and jackd2 installed. As for my sound card:
Code:
me@lappy486:~$ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
View 4 Replies
View Related
Mar 27, 2010
I'm running Ubuntu 9.10 rt (realtime) kernel on a Dell box and trying to hook it up to a Yamaha P-80 keyboard. I'm not sure how to figure out what kind of MIDI cable I'm using. But I haven't been able to get the keyboard to play or write music on my Ubuntu or on Windows XP.
1.) How can I give you more information about my system?
2.) How can I test if it's working properly?
View 3 Replies
View Related
Mar 21, 2010
I am using ubuntu 9.10 (kernel 2.6.31-9-rt) and an M-Audio Delta 1010 PCI sound card, and trying to get MIDI inputs and outputs to work on this sound card.I have Jack installed and working. MIDI signals from virtual keyboard or a MIDI player can be routed to fluidsynth, and fluidsynth's audio can be played back through the outputs of the delta 1010.I can use a MIDI sequencer (e.g. rosegarden or qtractor) to record MIDI from virtual keyboard, with jack handling the routing.
But, no matter how I configure the connections in jack, I can't get any signals from the "MIDI In" port on the sound card.Does anybody have some thoughts on how to fix this? Where is the disconnect between the delta 1010 and qtractor? I am concerned also that the "MIDI In" LED on the front panel of the Delta 1010 never blinks. There must be some basic ALSA configuration that needs to be done to activate and use these MIDI ports, or something. I've been trying to figure it out for days.
View 3 Replies
View Related
Jul 31, 2011
I am building a midi synthesizer that I'd like to be able to control from linux. I know its a rather broad question, but, how do I go about this? At this point the hardware consists of a simple UART bridge, and I've already written a simple C++ program using termios to send the raw midi data to the device. Obviously I don't want to write a player/sequencer from scratch, so where should I start if I wanted to get this thing to work with, say, a sequencer like rosegarden? Do I write the driver for rosegarden, or hook into alsa or what?
View 1 Replies
View Related
Oct 10, 2010
Currently enjoying TuxGuitar, but I was wondering if there is a way to use some sort of Creative Commons drum kit samples instead of the current MIDI drums. Also would like to use some sort of synth or samples for guitars. I have looked for tutorials on this, but have not found anything yet.
View 2 Replies
View Related
Dec 30, 2010
I'm running Ubuntu 10.04 with the Kubuntu desktop environment. I'm trying to use my MIDI keyboard through ALSA, Linuxsampler and Qsampler. But I still haven't got a sound out of it, and I fear that the information about the existence of the keyboard doesn't get through. That, or I don't know how to configure properly.
In sndstat, both my sound card (Guitar Rig) and my keyboard (Hua Xing) is showing up:
Quote:
cerapter@Ancalagon:~$ cat /dev/sndstat
Sound Driver:3.8.1a-980706 (ALSA v1.0.21 emulation code)
Kernel: Linux Ancalagon 2.6.32-26-generic #48-Ubuntu SMP Wed Nov 24 10:14:11 UTC 2010 x86_64
Config options: 0
[Code].....
View 1 Replies
View Related
Apr 25, 2011
I am looking for a software that would allow me to build rhythms, adding one percussion sound after another. Ideally, it should be possible to connect it to external MIDI device for recording and playing back the recorded notes.This would go something like this: I set up a rhythm, say, 4/4, and I hear metronome sound that hints about the pace. I have a percussion voice selected on my synth, and whenever I press a key on the keyboard, that sound is recorded on my PC, registering it's position in the pattern. PC is repeatedly playing back the recorded sequence, so I can enrich the beat with more and more instruments. When the job is done, I'd save the created sequence in MID file, and use it later.
I have installed Rosegarden on my Ubuntu, and it might well be that it has such mode that does exactly what I'm looking for, but since Rosegarden doesn't seem to have official forum (only newslist, but I am now reluctant to sign me up to just another newslist), I wanted to check in this forum, maybe someone knows right away. At least, I have succeeded playing MID files via Rosegarden to my synth,and recording from synth to the Rosegarden interface, and save the result in MID file.
View 2 Replies
View Related
Feb 20, 2010
I have a problem playing MIDI files on my system: I tried opening two MIDI files in Audacious, VLC, Aqualung and Rhythmbox, and Rhythmbox is the only one that will play them:
- Audacious crashes when clicking on the file in the playlist (immediately disappears)
- Aqualung doesn't add them to its playlist
- VLC produces an error msg saying it can't play MIDI
- Rhythmbox plays a MIDI file and immediately crashes at its end
I'm on Ubuntu Karmic 64 and have timidity installed.
View 7 Replies
View Related
Mar 27, 2010
I have a few things working now, so all I need to know is a good way to record the music you play from Virtual Keyboard. I've tried Audacity to do this, but it never works correctly.
View 6 Replies
View Related
May 21, 2010
Question moved to the Studio area as I didn't know about it!
View 1 Replies
View Related
Jun 26, 2010
I'm not sure what the technical term for the thing that creates midi sounds. Is it the midi sequencer? or midi driver?Regardless, I'm unhappy with the tones ubuntu produces for its drum midis. Does any one know how to change which tones it uses? I use lilypond to write percussion music and it can be easily translated into a midi file. I like to do this so that I can hear how the music sounds in real life and many mistakes.Unfortunately the toms are painfully low and hard to distinguish.
View 2 Replies
View Related
Jul 27, 2010
As an arranger of collegiate a cappella music, I often times need to listen to a song as I'm playing with a midi sequencer or some arranging software. On Ubuntu, since Gutsy, I've often run into the same problem from distribution to distribution:
Midi and audio won't work at the same time. If I have an audio file open on VLC or FireFox, I can't play Midi sequences on my arrangement. If I'm arranging and listening to Midi notes, I can't play music. Note that it's incredibly inconvenient to constantly close one so I can play the other to finish arrangements.
View 3 Replies
View Related
Sep 15, 2010
I'm under Ubuntu 8.04 LTS Hardy Heron using pulseaudio. I've got 2 soundcards : one internal AC97 7.1 without midi (card 0 in ALSA) and a PCI C-MEDIA 2.1 with OPL3 midi (card 3 in ALSA) I have sound in most ALSA or OSS applications with full 7.1 + 2.1 duplex. I have MIDI playback in any ALSA MIDI players (client 29:0 in ALSA).
I'm trying to run Final Doom for W95 on WINE with OSS driver. I have sound effects but no MIDI music. I tryed with padsp and aoss wrappers. I know I can use ALSA driver in wine or timidity, but I would rather use padsp + hardware MIDI if possible. How do I configure ALSA OSS emulation for MIDI playback and check that it's working ? I tryed playmidi but whatever I told it, it couldn't find any midi device.
View 2 Replies
View Related
Apr 21, 2010
I have switched from windows in the past few months and have solved all my issues with Ubuntu so far. The only problem I still have now is that I can not play midi files on my piano through Ubuntu. This is the piano I have: [URL] When I had windows, I used Dell Latitude c600, Van Basco's software: [URL] and one of these USB-midi cables: [URL]
to play my midi files on the piano. In ubuntu 9.1 I can play the midi but only through the laptop. It does not get sent to the piano. I'm new to Linux but can follow direction. Hate to be going back to windows. Installing Van Basco through wine keeps crashing and does not work.
View 1 Replies
View Related
Jun 5, 2010
I just switched to Ubuntu 10.04 and I'm looking for a way to be able to play piano with my M-audio Keystation 88es keyboard.In Windows I use the amazing Synthogy Ivory piano sounds. Is there anything similar in linux? everything up? I followed different instructions on how to setup Jack to make it work and it can see the keyboard but I wasn't able to get any sound out of it.My computer has the Asus built-in sound card and I also have a separate M-audio Audiophile 192 sound card.
View 1 Replies
View Related
Oct 24, 2010
I tried LMMS but just can't get the sounds correctly, it sounds mushy no matter what setting i put in it.Can you recommend me some other software?
View 1 Replies
View Related
Jun 18, 2010
Can't play midi files on my Dell Inspiron 1300. Do I need another application?
View 4 Replies
View Related
Oct 16, 2010
I'm new to ubuntu but i do have a basic understanding of programming, but nothing too serious. The reason I am mentioning this is because I have a little project. Currently I use JACK to control the transport of all the aps i use to make music with ardour, hydrogen and rosegarden mainly. I also have an external midi drum machine that I sometimes hook up into the mix via midi in/out, my drum machine (yamaha ry to be exact can send and receive midi data. My question is can I use the transport controls on my external drum machine to control JACK's transport controls? If there is already am app that does something like that, excellent!
View 3 Replies
View Related
May 20, 2011
Stupid browser froze up when I tried to submit this before... *sigh* Anyway, is there a simple midi editor that that isn't Rosegarden and doesn't require JACK? Something would simply let me load a Soundfont, and then edit and export a multi-track midi file without a bunch of other stuff you have to do?
View 2 Replies
View Related
May 7, 2010
Can I control parameters in the Calf Plugin synthesizers(Monosynth and Organ) via MIDI controllers? And if so, how?
Also, if not, please tell me about software synths that i can fully control(i know Zynadd already
I've searched the web and all but nothing turned up.
View 6 Replies
View Related
May 2, 2010
is it possible to configure my midi play back on windows 7 to play that one of the 2:[URL]..
View 2 Replies
View Related
Aug 11, 2010
I need to play or preferably convert (i.e. to MP3) old SNG files, which contain voice records. From what I could find, it's basically a MIDI created by synthetiser. I think it was recorded by some ancient VLC player. I failed so far to play it on anything I could download.
View 4 Replies
View Related
Jul 15, 2011
Does anyone know of any good .mp3 to .midi converters out there that are free and for Linux?
View 9 Replies
View Related
Mar 14, 2010
Been searching around about this for ages, got a .mid exported from rosegarden (which is an awesome program). Need to make it an MP3 or OGG or any kind of standard audio file. With Timidity: I'm using version 2.13.2. Found this advice: [URl]... Isn't it awesome and clear and well put together? If your wondering yes the file will play for me from Timidity and I can hear it fine. Problem is there's no "Config" on my version. Closest thing is when i click file and save config. Normal click doesn't open the menu, gotta click and hold, which i do, then drag the cursor down to where i want it and release, nothing happened. It also said meta + S would open it, that's super/windows key + S, right? No luck.
Anyone know a comandline way of doing it? I found a list of commands for it here but it's probably grossly out of date: [URL]...y/timidity.txt and i couldn't find anything about saving. With Audacity:
Apparently you can use Audacity to record the output of the sound card directly. However I can't seem to figure out how to set this. It says in the into there's a preferences drop down next to the mixer thingy, maybe i'm blind but I can't find it anywhere.
View 9 Replies
View Related
Dec 10, 2010
Only place where i need midi is mainly when using Tuxguitar. I tried tuxguitars settings, but it shows only tuxguitar sequencer and midi-through port 0. Haven't done this before so i really don't know where to start from..?
View 2 Replies
View Related
Mar 31, 2010
I'm looking for info on setting up a piano type usb keyboard (also called midi controller?) in ubuntu. Any of the references I have found cite alsa, and I'm assuming they won't work with pulse. Also I'm sort of stalling on purchasing said keyboard until I feel there's a reasonable probability of it working. Here's a reference with alsa [URL].
View 1 Replies
View Related
Apr 27, 2010
How to play a MIDI file, or a .mid file, <embed>ded in a Web page from my Ubuntu/Firefox combination?
View 1 Replies
View Related
Feb 27, 2011
I just installed the MIDI Virtual Keyboard from the Software centre.Problem is when I hit the keys there's no sound at all.
Please tell me what I'm doing wrong? or if I need to add some other package to make this work?
View 3 Replies
View Related
Feb 3, 2010
I am trying to sync up my Yamaha AW4416 daw to ubuntu studio 9.10 in order to use drum and midi sounds. I have tried using MTC and midi clock slave and master but to no avail.I am using an Edirol UA-25 usb soundcard with the advance switch on to enable midi.
View 1 Replies
View Related
