After 2 months without any problems, my second screen plugged on my laptop has stopped working. It works on my windows partition. When I start the computer, I see the login screen on both screens. When I enter the password, both screen turn to black. If I unplug the extra monitor, the laptop start normally.I'm on Ubuntu Natty, my laptop is a Thinkpad E420s with Intel HD graphics, i5 cpu, 4gb ram.
View 9 Replies
[code]...
Just got World of Warcraft Installed and when I start the game after I get past the 2 cinema's while I'm trying to click yes on the rules the screen seems to bee flashing over and over and over. I was thinking maybe the 3d accelerator isn't installed or maybe I need to install something because its Intel?
[code]...
I've installed CentOS 5.5 64 bit on a Dell Latitude e6410. This model only contains Intel HD Graphics, not the extra Nvidia card you could also buy in addition. The getinfo output can be found here:[URL] Initially X11 did not work at all (blank screen), but using hints from other posts in this forum I was able to fix this by editing the file xorg.conf using the vesa driver, although I still do not get the native screen resolution of 1200x800 (I alwas get 1152x768).
Now I want to add an external monitor (Samsung Monitor connected via DVI, screen resolution 1680x1050). Unfortunately as soon as I try to configure the dual head mode using the system-config-display tool after restart of the X server there will be the the blank screen again. I tried various drivers with no luck.Has anyone succeeded setting up dual head on an Intel HD Graphics machine? I understand that this hardware is quite new and and would be easier to set up with more recent distros, but I would like to stick to CentOS, but cannot wait for CentOS 6.
I use Intel HD Graphics and every time I run a game, it black-screens and I have to restart a thousand times before the game works and I can switch to windowed mode (restart once to do this).
lspci:
[alex@alex01 ~]$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) .....
I also use an HDMI cord (since computer has HDMI support) so this may be contributing to the problem. The same does not occur with my laptop, which runs Nvidia graphics and Ubuntu. I really want this to not happen so I can play my games instantly without restarting a million times. Some games have yet to work (AssaultCube mostly).
Just a little background I have a sony vaio VPCZ119X laptop and have been struggling to get all components working under linux especially the intel graphics. I saw that once I upgraded to the latest available kernel release which currently is 2.6.37 rc7. The intel graphics is working, but sometimes when I boot I get a blank/black screen but seems to be lit up. All other functions seem working so for example I am able to login etc just that I dont see anything on the screen.
I have tried the following so far to identify the issue or isolate it:
- Switching to the console screens has no effect, still the black / blank screen.
- Restarting the system does not always immediately get the screen working, sometimes it takes a couple of reboots before the screen is available
- I have a switchable graphics with nVidia I never get this problem when I use the nvidia driver
- I have tried closing the lid etc as suggested in the below post without any change in output, will try further as there are other options available as well The "Black Screen" on Boot I see one difference between both the Xorg log files but I am not able to reason out why this happens hence I will just supply the files here and try not to theorize.
Xorg.0.log - This was the log output when I got the X display working Xorg.o.log.old - This was the log output when the X display was black/blank Also to highlight that I am using the latest kernel release that is still being tested I guess so maybe it is also a bug in the kernel?
Just spent about 4 hours upgrading from 9.10 to 10.04 thinking it would fix my graphics problems. Basically I have no 3d acceleration of any kind, is there any way i can load the intel drivers? Because what I'm using now is really crappy.
[code]...
Can i just change something in my xorg to intel and it will load that driver ? I've tried the "hardware drivers" thing but it does not show anything.
I have Intel HD Graphics video card on my laptop using OpenGL 3.0 with Mesa 10.3.2, but I need OpenGL 3.3.
Can I upgrade/enable OpenGL >=3.3 on Mesa for my GPU for Debian 8.1 Jessie? How can I do that?
Output of glxinfo | grep OpenGL:
OpenGL vendor string: Intel Open Source Technology Center
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.3.2
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
[Code] .....
I am running kubuntu 9.10 on a dell inspiron 14 with an intel GM45 graphics card. When I run 3d games like Nexuiz, openarena and tremulous I get really random performance. Sometimes things are totally playable with somewhere between 50-80 fps and other times I get maybe 4 fps and everything takes forever to load. These effects persists between logouts, X restarts and reboots! I get no errors when I run things in console either.I never really play games much but when something doesn't work...
View 8 Replies View Relatedi'm trying since ubuntu karmic to set up a xorg.conf for a special purpose. I've a htpc connected to my tv. Intel GMA 4500, DVI->HDMI-cable connected, Lucid Lynx installed. When the machine boots with the TV powered on, everything is perfect. xrandr reports all valid modes on output "DP2". Without the TV powerd on, Lucid starts in the low graphics mode, with the funny zenity-message. So far, i managed to disable all useless outputs (VGA1, HDMI1, DP1, HDMI2), leaving DP2 enabled. I managed this by assigning outputs to monitors and adding Option "Ignore" "True" to the corresponding monitor-sections. My only remaining problem is, that the intel-driver reports no connected monitor on output DP2. The TV is connected, but shut off. Has anyone got a hint to tell the driver to ignore the presence of a monitor?
[Code]...
I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
View 1 Replies View RelatedI'm stuck at 800x600, and no matter what i try i seem to hit a dead end. I've got the Intel Mobile 945GM/GMS rev 03, and it seems like lots of people have had to fiddle to get it working. Here's the info I've collected and tried so far. Ubuntu Edgy On Intel 945GM Graphics & Wide Screen LCD NoteBooks � 100% Linux Addict
HOWTO: install drivers and set up widescreen res. with Intel 945 vga card and Ubuntu - Ubuntu Forums Mostly Harmless: SuSE, Acer aspire 5580 and non-standard resolution 1280x800 Intel 945gm And 1280x800 Laptop Monitor Problem Suse 10.2 - openSUSE Forums I'm not too proficient with linux yet, so the right solution might be here and I'm just not getting it right. Maybe i'm not on the right path at all.
I recently installed openSUSE on a new Toshiba and i'm getting very choppy video while watching videos on ....., justin.tv, etc. The video is fine as long as I don't full screen. However, when I try to fullscreen a stream on justin.tv or a ..... video, it instantly becomes choppy and video is extremely delayed in relation to the sound. The sound still continues at it's regular pace, however the video lags behind and is just choppy in general.Also, not sure if this helps, but i'm running an i3 2310M.
View 5 Replies View RelatedI have been unable to get both opensuse 11.2 and 11.3 32 bit versions work properly on my DELL Latitude E6410 laptop. With both 11.2 and 11.3 KDE Live CDs I get no graphical display when I attempt to boot into the Live system. VESA mode does not help either, only text mode works. So I installed the system in text mode but during the first boot the screen went blank again.
One peculiar thing is that 11.1 installs and boots fine, what gives? Is this even supported or I shouldn't even try to bother getting this setup to work? Has anyone been able to run opensuse 11.3 on a Core i7 integrated Intel graphics system with X system working?
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
I'm having no end of problems trying to get 10.04 onto my older Toshiba Satellite A50 laptop that I use as a spare laptop round the house. The laptop previously dual booted with XP and Xubuntu fine. I wanted to give Lubuntu a go to see if it's performance was better on this older hardware. When installing I got the black screen of death, and also got the same problem with the Xubuntu CD. Research pointed me in the way of this article: [URL] I was able to boot the Lubuntu Live CD using the instructions outlined in method A.
Once installed however I rebooted and Grub seemed to be knackered. Just sent me to a recovery console of which I had no idea what to do. As I could no longer boot into Windows either I reinstalled Xubuntu 9.10 and all was fine. I decided yesterday to give it another bash this time connecting to my wireless from the live cd hoping it would download an update to fix this problem. Nadda, Grub this time did show and I was able to boot into XP, but upon picking my Linux distro I now get an unrecognised device error with a long string of charachters and then it dumps be back into the grub menu, choosing the recovery mode version does the same thing.
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
I'm building a new Ubuntu system for use as a desktop machine and personal server (http, smb, smtp). It'll be based on an Intel i7 950 and a Gigabyte X58A-UD3R LGA 1366 ATX Motherboard.
I'm looking for recommendations for a graphics card that will support dual monitors and runs well under Ubuntu. Would like some decent 3D support.
I have a dual boot xp -ubuntu - AGP ati 2600 series radeon. Intel 8300 dell. The message comes up after login "ubuntu is running in low-graphics mode". I hit ok and I get 5 choices and none of them work.
1) run ubuntu in low-graphics mode.
2) reconfigure graphics.
3) troubleshoot the error.
4) exit to console login.
5) restart X.
I'm busy building a machine now and I'm looking to set up dual monitors because it's something I've always fancied but never had the resources to do. I'm basically looking for advice on choosing a graphics card that will support dual monitors with good driver support under Ubuntu. After a few hours of browsing the forums I determined nVidia were the way to go but I'm honestly not bothered if people want to suggest ATI. I'm not a gamer so really only need the card to support dual monitors. I'll also need to know how to set up the card under Ubuntu and then subsequently how to edit xorg.conf in order to get the dual monitors working.
View 6 Replies View RelatedI'm running Jaunty, and I'm trying to play a film that is .mkv format through VLC. Everytime I try to play it, the screen either freezes up completely, or it sends me to the login screen. It's only with this one film, though. I have a number of other films in this format, and they all work perfectly.I'm a bit of a newb, so I'm not entirely sure where I would find out what went wrong
View 1 Replies View RelatedI have a question that has been partially answered in other posts and forums but I am still unclear. Please can someone help me out? I was previously using an Intel Atom 1.6GHz, 1GB RAM and the onboard Intel graphics adaptor for use as a media center PC. This was running Lubuntu and I could use Flash at full screen without any issues.
I have since decided to upgrade to an Acer Revo R3610 (Dual core Intel Atom 1.6GHz, 4GB RAM, Corsair SSD and Nvidia ION grpahics). I thought that as this machine was more powerful than my previous one, I could get away with ditching Lununtu and go for Ubuntu 10.10 (x86).
I have updated the machine and installed the latest Nvidia drivers. When I browse to a Flash based site all runs fine until I go to full screen then I get about 10FPS (sound remains fine). The video is unwatchable. I rebuilt the machine using Windows 7 Ultimate (x86) and tested again. Under Windows the video plays perfectly.
I have also tried using the 10.2 beta version of Flash under Ubuntu and this gives the same terrible results. I am at a loss as to where the issue lies. Is it with Nvidia's driver, Adobe's Flash under Linux or is it my Ubuntu build?
I'm trying to get dual monitors working on a fresh install of debian from the netinst install cd. I did not allow the installer to download any packages and then manually installed xorg gnome-core & gdm using apt-get.
The monitors are plugged into the onboard vga and dvi ports of my motherboard. I believe the chipset is intel.
At the moment the displays are cloned.
I don't know much about xorg.
This is my xrandr output:
i just found out (late i know) that the knew skype beta 2 now comes with the awesome screen-sharing feature that skype for mac and skype for win comes with..so i uninstalled the old skype and installed the new beta version with lightning quickness to try that out.. (and show off my compiz effects to all my friends lol!!)anyway, it seems to only work halfway for me. sharing the FULL screen will cause my skype app to crash and close instantly. but sharing a screen selection works just fine... even though i can't resize the screen selecting area.. but it's not that big a deal for me.
View 7 Replies View RelatedI have Ubuntu 10.04 it works perfectly fine, until I boot with no screen. Then I get the "low graphics mode" and I cant remote desktop into it...
View 1 Replies View RelatedJust fitted an Inno3D (I-7300LE-G4E3) graphics card and I get a distorted boot up screen, a virtually unreadble boot menu (lots of extra white bits all over the screen) and when the system is booting the black screen with "booting from .." and the underscore at the end, is covered with white commas (?!), then the login screen pops up for a fraction of a second, then get a blank screen and no signal-cant get anything after this (or from the vga port on the pc)-I ve tried logging in even though I cant see anything, but no music , nothing.
Thought I might have to download drievers AFTER I d installed it, but as I had this problem, I removed it and tried to download driers before installation. Not sure which of the 4 to try, but tried 2 and neither works-GDebi is offered as an app to open them but nothing happens, nothing happens if I just click on them and when I try and install them from a terminal with the script from the nVidia site, it says unable to open them.
I found a nice old mini industrial PC with an Jetway NF92 motherboard (Atom N270/Intel GMA945 GPU).
Installed Jessie on it, I have a strange problem under X11: mouse pointer is garbled (looks like somebody cut the arrow in four separate sprite and shake them well , and screen flickering. If I move down the mouse in the lower part of the screen, the screen flicker slowly, if the mouse goes in the top part of the screen, screen flicker rapidly... And finally, putting the pointer on the last line of the screen make the screen stop flickering with perfect screen....
Code: Select allroot@telmat:~# uname -a
Linux telmat 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) i686 GNU/Linux
root@telmat:~#
Code: Select allroot@telmat:~# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
[Code] .....
I have recently upgraded to Ubuntu 10.10. However the bottom of the screen is cut off with only a trace of it visible. I had similar problems with version 10.04 where both and top and bottom of the screen were not displayed.
I have noticed that version 10.10 does not use the proprietry driver the previous versions used.
In desparation I have tried Kubuntu but the results are still much the same.
Does anyone have any idea how I can display a full screen with an Nvidia integrated graphics controller.
I am wondering, what is the status of Intel GMA X4500 driver on Fedora 10.
View 2 Replies View Relatedi switched my netbook over to ubuntu and love it, ive been trying to switch over my desktop and managed to work out the file sharing...but cant figure out how to do dual screens with ubuntu.
my video card is a geforce 7600 gs, i loaded wubi to give ubuntu a shot and couldnt manage to get it like i have it in XP...i use my main monitor and i can move things to the right to my TV hooked up with an RCA cable, maximize it and play it like its a 2nd screen...when i tried to hook it up using ubuntu it made it like one giant screen...how do i get 2 entirely separate screens?
