Ubuntu Installation :: Dual Boot With An I8xx Graphics Chip On 10.04 - Get Black Screen Of Death
May 26, 2010
I'm having no end of problems trying to get 10.04 onto my older Toshiba Satellite A50 laptop that I use as a spare laptop round the house. The laptop previously dual booted with XP and Xubuntu fine. I wanted to give Lubuntu a go to see if it's performance was better on this older hardware. When installing I got the black screen of death, and also got the same problem with the Xubuntu CD. Research pointed me in the way of this article: [URL] I was able to boot the Lubuntu Live CD using the instructions outlined in method A.
Once installed however I rebooted and Grub seemed to be knackered. Just sent me to a recovery console of which I had no idea what to do. As I could no longer boot into Windows either I reinstalled Xubuntu 9.10 and all was fine. I decided yesterday to give it another bash this time connecting to my wireless from the live cd hoping it would download an update to fix this problem. Nadda, Grub this time did show and I was able to boot into XP, but upon picking my Linux distro I now get an unrecognised device error with a long string of charachters and then it dumps be back into the grub menu, choosing the recovery mode version does the same thing.
View 6 Replies
ADVERTISEMENT
May 29, 2011
I run a live cd I downloaded, right? Everything goes fine - it installs with no real issues whatsoever, when all of a sudden after the install it boots to nothing but the famous black screen with a white, blinking dash.So, what do I do? It was installed on a Dell Inspiron 9300 laptop, and I ended up completely wiping the XP drive to do it
View 4 Replies
View Related
Nov 2, 2010
I have installed Ubuntu 10.10 alongside Win 7 on a seperate partition. But starting from yesterday, my Ubuntu doesn't boot. Instead I get a Black Screen of death. I tried the Ubuntu Safe mode, and hit grub>boot I got a message saying, "No kernel selected."
View 1 Replies
View Related
Mar 15, 2009
I currently have a successful dual boot of XP and Fedora 10. I need to re-format my windows partition and re-install XP. When I use the windows CD, it asks to boot from cd. I hit any key and the screen goes black and stays there. XP is the primary OS (C, fedora is the secondary (D. Any thoughts? I still need Windows, because I am just learning Fedora.
View 2 Replies
View Related
May 12, 2011
I've had it with 11.04. 2 days, countless posts read, and I still get the black screen of death. I want to go back to 10.10. Can I do it without a complete re-install, and if so, how?
View 5 Replies
View Related
May 15, 2010
I'm having a really odd problem since I upgraded to 10.04 on my IBM T40 laptop. Every now and then, especially if I'm using Firefox (so it seems), I will be in the middle of something and suddenly I get a black terminal screen that flashes a few lines ending in "checking battery state" and I get bounced back to the login screen. I log back in and all my work is gone (Firefox and whatever else was open has closed). I was on the web for a while tonight and in a few hours it did it three times. I never had this happen before in 9.10.
Any idea what's going on? If it matters I'm on AC power when this is happening. I haven't used it long enough on battery to know if it does it then or not.
View 1 Replies
View Related
Dec 11, 2010
I had Ubuntu 10.04 running fine. Then I got curious about NVIDIA XServer.
"ATI Technologies Inc RV380 [Radeon X600 (PCIE)]" - Video Card
I opened it up, clicked a settings change, and said OK.
It said you need to update your blah blah blah.
Then it said blah blah blah doesn't exist.
Then it said it would create it for me.
Then I said REBOOT!
Now I get a black screen of death.
The only way I can get anything to happen on my monitor that comes from this computer is to boot into the Install Disk and say "TRY UBUNTU".
View 6 Replies
View Related
May 1, 2010
Ubuntu has been crashing on boot. I used a recovery mode kernal and went into failsafe mode, upon which point a msgbox told me to switch to low graphics. Then Ubuntu looked completely normal and functional with no problems. To me - an Ubuntu amateur, it seems like a driver problem and that running in failsafe mode will have its setbacks.
View 9 Replies
View Related
Jun 6, 2010
In effort to fix garbled text when scrolling I attempted to boot into safe graphics mode. I now get to the login screen, enter password and then go to black screen.
Kubuntu 10.04 upgrade
geforce FX5200 graphics card
2gb memory
AMD XP2800+
View 1 Replies
View Related
Nov 20, 2010
I'm trying to run 10.10 off a USB. On one computer with a nice discrete AMD graphics card, the thing boots fine. On a Dell Latitude e6510 with Intel HD Graphics (the one that comes with a Core i7) I get to the boot screen, the initial text crawl, and then the screen blanks.
Now, I can hear the standard Ubuntu start up noise about 20 seconds later so I know everything is running, just the video driver is not.
I can not do a CD install or anything off the hard drive, only the USB. I'm wondering if anyone knows some edit you can do at the boot menu (using tab) to revert to some graphics safe mode.
View 4 Replies
View Related
Dec 30, 2010
Just a little background I have a sony vaio VPCZ119X laptop and have been struggling to get all components working under linux especially the intel graphics. I saw that once I upgraded to the latest available kernel release which currently is 2.6.37 rc7. The intel graphics is working, but sometimes when I boot I get a blank/black screen but seems to be lit up. All other functions seem working so for example I am able to login etc just that I dont see anything on the screen.
I have tried the following so far to identify the issue or isolate it:
- Switching to the console screens has no effect, still the black / blank screen.
- Restarting the system does not always immediately get the screen working, sometimes it takes a couple of reboots before the screen is available
- I have a switchable graphics with nVidia I never get this problem when I use the nvidia driver
- I have tried closing the lid etc as suggested in the below post without any change in output, will try further as there are other options available as well The "Black Screen" on Boot I see one difference between both the Xorg log files but I am not able to reason out why this happens hence I will just supply the files here and try not to theorize.
Xorg.0.log - This was the log output when I got the X display working Xorg.o.log.old - This was the log output when the X display was black/blank Also to highlight that I am using the latest kernel release that is still being tested I guess so maybe it is also a bug in the kernel?
View 9 Replies
View Related
Apr 27, 2010
I've had Windows 7 installed for a few months now and would like to install Fedora 12 on a separate partition. I've tried this three times now, all of them ending with something wrong. The problem that exists for me now is that when I install Fedora 12 and boot up for the first time in GRUB, Fedora 12 works fine. ut when I boot into Windows 7 from GRUB, it just comes up with a black screen and says "BOOTMGR is missing; press ctrl + alt + del to restart" at the top. I don't believe that GRUB is booting into the wrong partition because I have no Windows recovery partition, just Windows 7. Also when I try and fix the Windows 7 partition with the system recovery disk, it says that the volume is corrupt every time. At this point I have everything backed up on a separate drive so I'm open to try installing Fedora 12 again even if it risks screwing up my Windows 7 partition, I would really just like to have a functioning dual boot.
View 2 Replies
View Related
Jun 13, 2010
I am relatively new to Ubuntu ; I started 6 months ago with 9.10 and it worked fine. Recently I bought from Ubuntu the 10.04 version in French. The installation (dual boot with W7) went well, I personalized the software and had the "brilliant" idea to execute the recommended updates. Restarting the computer I just saw for a couple of seconds the blip up left and then a black screen. Nothing else happened. Posts to the French Ubuntu forum yielded no solution, so I decided to reinstall 10.04 again. It worked well a couple of times, and then again I had the black screen and no boot. How can I delete the installed versions?
View 1 Replies
View Related
Aug 7, 2011
i cant install my graphics drivers. Everytime i do, i get a black screen of nothing on restart. I'm running ubuntu 10.10. here are my graphics cards.
[Code]...
View 1 Replies
View Related
Jul 15, 2011
just installed ubuntu on my win 7 laptop using the wubi.. after the install it said restart,so i restatred and booted up ubuntu which went sound,it then says finishing installation.. ubuntu comes up does the partions then started copying files then once it had done this the screen went black with loads of writing on it..it seems to just stay like this.. i left it 30 mins the restarted laptop again..laptop working sound booted ubuntu again and the same thing happened..
View 1 Replies
View Related
Apr 23, 2010
I'm trying to get 9.10 to work nicely on a Thinkpad Edge 14".Everything is working fine, except that I have issues with the intel graphics drivers.The monitor's native resolution is 1366x768 and I have Intel HD graphics card on it.I have changed my xorg.conf to use driver = "vesa", but now I get only a resolution of 1024x768.I tried to use xrandr to fix this, by adding a new mode etcetera, but this does not work - I believe because the driver is the issue.Also, doing Ctrl+Alt+F[1-6] gives me a blank screen rather than a console.
How do I find out the details about my graphics chip? Intel Corporation Arrandale Integrated Graphics Controller (rev 12)Maybe I should go more bleeding edge for my drivers? How do I do that?
View 4 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Jul 20, 2009
I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
View 1 Replies
View Related
Oct 19, 2010
I have an Acer Aspire 4730Z laptop running Edubuntu 10.10 (32 bit, clean install). My problem is with the boot process. After boot and everything seems working properly, I will get the ?black screen of death? followed by the log in screen. Unfortunately, the display is made up of nothing but horizontal and vertical lines, leaving noting recognizable. I have to do a hard restart. I have to go through this process 2-4 times before I am up and running. The ?black screen of death? occurs right after I load any program
View 3 Replies
View Related
May 11, 2015
If you have a Radeon graphics chip and upgrade to Jessie, install firmware-linux-nonfree, before rebooting.
My dist-upgrade to Jessie seemed flawless until I rebooted and couldn't get into X.
Seems Jessie boots into Gnome by default, but Gnome now requires 3-D acceleration. For my Radeon graphics chip (ATI Radeon 3100), this requires firmware-linux-nonfree, which I didn't need before and was not installed as part of the upgrade.
A boot message alerted me to this need.
I was able to get X going with xinit. I used FVWM; for XFCE I believe the command is:
xinit /usr/bin/xfce4-session -- :1
and from there I installed the package firmware-linux-nonfree.
View 2 Replies
View Related
May 1, 2010
I've installed almost every version of ubuntu so far and four different versions on this computer, and I've never had a problem with the installation cd. The install cd on this new version however gives me only a purple screen of death with a white line down the middle. What is going on? The ubuntu-10.04-desktop-i386.iso file's md5sum is fine. I've burned it successfully on two different discs and still I can't install it. I've got a Dell 6400 with an nvidia geForce 7300 video card.
View 9 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
Jun 15, 2010
I currently have integrated graphics on my system but I am going to gettign a new graphics card to use. Click here to see it. I have a dual boot system with Windows Vista and Ubuntu 10.04. How would I install it? I know how I would plug it in but setting it up is another issue. I want it to work on both Vista and Ubuntu. Another question is what I should do about my current integrated graphics (Do I disable it or something like that?)
Here is my system's specs: HP Pavilion a6554f
View 2 Replies
View Related
Oct 11, 2010
I'm trying to setup a dual boot of windows 7 x64 and Ubuntu 10.10 i386. Before I got windows 7 and the new graphics card it ran 9.10 perfectly. If I take the card out (Nvidia 8800 Ultra), it will install fine but when I put the card back in, it crashes. It appears that it just doesn't like the card.
View 3 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
Mar 9, 2011
I just finishing burning ubuntu on my laptop and was getting ready to partition my disk to allow space for ubuntu. I restarted my computer and when it was restarting ubuntu logo came up (as it booted from the disc). I was not wanting to install it at this moment so i was waiting for it to load then cancel it(just like a windows installation).It then froze and became pixelated with green and white colours.I thought it was nothing maybe just an error in teh disc. I waited 5-10 minutes then held the power button to shut it off. I then went to settings in the bios and changed it to boot from hdd first. After restart, windows began to load for like 3 seconds then blue screen. I dont know what went wrong or why this is happening.During installation of Ubuntu on my second try I keep getting:sudo: can't read /etc /sudoers: Input/Output errorsudo: no valid sudoers sources found, quittingWhat are the odds of me still having my windows 7 data?and could Hiren's boot cd help?
View 5 Replies
View Related
May 1, 2010
i feel like i should be on the payroll if I have to work so hard and long to get these things working. (ranting stopped, for now) I have ATI Mobility Radeon HD 4330 GPU in my Dell Zino system and finished the upgrade from 9.10 to 10.04 LTS and got the purple screen of death. tried the intel recommended fixes but got nothing. I cant even get into recovery mode.
View 3 Replies
View Related
May 6, 2010
I initially had problems with the install CD giving the purple screen of death (a screen of vertical purple lines), however I managed to press F6 and set nomodeset and then add "xforcevesa no splash --" to the boot parametres (I guess) and I was able to boot into the live CD. Now however, I've installed 10.4 and I'm back to the purple vertical lines. My Dell 6400 laptop has an nvidia 7300 video card which must be the problem. My question is, how do boot into some kind of low graphics mode so that I can install the proper video drivers? I've been pressing shift to get to the grub menu, but the recovery mode only gets me the purple vertical lines as well, and I don't know what I'm doing.
View 7 Replies
View Related
Apr 28, 2011
I just upgraded from Ubuntu 10.10 to Ubuntu 11.04 Natty Narwhal and now I've got a purple screen of death. The download and install process all went okay, but when I restarted the computer through the upgrade dialogue to complete the installation process the system never came back online. When I turn on my computer it goes through the standard boot screen (F2 and F12 options shown while it boots the HDD, ODD, and wireless modem), and then it goes to a purple Ubuntu screen and doesn't do anything at all. I let it sit like that for 30 minutes before turning off the power and trying to boot again, but the same thing happened. I can press CTRL-ALT-DEL and the system will reboot, but nothing I know to do will get me past the purple screen and the Ubuntu logo. DI'm using a Dell Studio 1 desktop computer. It's got a 2.5ghz Pentium processer, 4gb of RAM, and a 400gb HDD. I don't dual boot, and Ubuntu is the only OS installed.
View 6 Replies
View Related
Jan 28, 2010
Last weekend, I upgraded my old PC and installed Ubuntu 9.10 on a brand new pc. It worked perfectly for 5 days. When I got home tonight, it wouldn't boot and got stuck on a black screen.
[Code]...
I really am a newby here but I think that the blkid command gives me my uuid. The uuid in the /dev/disk/by-uuid directory is in blue so I'm guessing that this is a symbolic link. And then, when I try to create a symbolic link with the ln command, it already exists... But the issue is that the UUID that is referenced in the error displayed is not the same as the UUID in my /dev/disk/by-uuid directory.
View 9 Replies
View Related
