OpenSUSE Hardware :: Ubuntu Edgy On Intel 945GM Graphics & Wide Screen LCD NoteBooks - Resolution Limited To 800x600
Mar 12, 2010
I'm stuck at 800x600, and no matter what i try i seem to hit a dead end. I've got the Intel Mobile 945GM/GMS rev 03, and it seems like lots of people have had to fiddle to get it working. Here's the info I've collected and tried so far. Ubuntu Edgy On Intel 945GM Graphics & Wide Screen LCD NoteBooks � 100% Linux Addict
HOWTO: install drivers and set up widescreen res. with Intel 945 vga card and Ubuntu - Ubuntu Forums Mostly Harmless: SuSE, Acer aspire 5580 and non-standard resolution 1280x800 Intel 945gm And 1280x800 Laptop Monitor Problem Suse 10.2 - openSUSE Forums I'm not too proficient with linux yet, so the right solution might be here and I'm just not getting it right. Maybe i'm not on the right path at all.
I'm a faithful user of Ubuntu Linux, especially 9.04 Jaunty Jackalope. I have a problem with my screen resolution on my LG Flatron L1718S. It's a 17 inch and its recommended resolution is 1280x1024.I was on this resolution all along until now. Now I'm limited to 800x600 resolution. Here's what happened. Before installing Ubuntu 9.04 on a friend's computer, I put in his Seagate 40 Gig hard drive into his Intel Celeron Box with a 2.93 GHz and 512MB ram. I then plugged my monitor into his system. Upon booting, I discovered that the hard drive had a very strange looking operating system called OS2 Warp...seemed like Black XP to me. On the desktop, the icons were so big and bloated,the mouse was frozen, there was so much eyecandy which demanded so much graphics resources.
His graphics card is an onboard one, framebuffer. I then rebooted the machine, this time running the Ubuntu 9.04 live CD. Resolution still ok, with 1024x768 this time. I installed Ubuntu 9.04 and finished. I shut down the machine, unplugged my monitor and plugged it back into my machine, which is a Intel Celeron with a 2.4GHz processor, 1,5GB RAM, 80GIG X 2 Seagate IDE hard Drives, 2 DVD Drives, an LG Spermulti-DVD rewriter and a BENQ DC W2000 rewriter.My graphics card is NVidia GeForce NV34 FX5200 Series, 256MB RAM Graphics Card. Suddenly everything on the desktop is so large, and the maximum resolution now is 800x600. It becomes 640x480 if i add Nvidia drivers, version 173. If I switch over to Windows XP, Service Pack 2, I have no resolution issues there. Nvidia drivers are loaded there as well. No issues with resolution there. To test the screen again, I plugged my monitor back into my friends computer that I mentioned earlier on. The resolution is stuck on 800x600. After plugging the monitor back to my computer, I tried to edit the X.conf using "sudo nano", adding the desired parameters, like undetected screen resolutions, monitor name, device,etc, but nothing worked.
I always had to resort to the backed up configuration file for XOrg. The latest Ubuntu 10,04 Lucid Lynx picks up my monitor with a maximum resolution of 1024x768.The Mandriva One 2008 Live CD also gave me the same result like Ubuntu 10.04, this time giving me more higher resolution options. Strangely enough, from my Ubuntu 9,04 and older, after several tests, the resolution is still stuck to 800x600. When I press the AUTO RESET button on my monitor, the screen says "Processing image Auto Adjustment-For Optimal display, change resolution to 1280x1024". A factory reset did not help. The resolution was perfect until I plugged my monitor into my friend's computer, the one with the 2,93GHz processor. I took another friend's monitor, a HP Cathode Tube Monitor, a 17 inch as well, and plugged it to my machine to test the resolution. The results were glorious! All resolution options were shown, from the lowest "320x240" to beyond "1280x1024". Plugged it back to mine, the same result showed: 800x600 resolution, the lowest being 320x240. I kindly ask for advice on how I can be able to get all the screen resolution options available on my Ubuntu 9.04, like before, because it shows the maximum of800x600, lowest- 320x240 on "display" in "System--Preferences".
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code: X.org X Server 1.8.0 Release Date: 2010-04-02 [ 15.124] X Protocol Version 11, Revision 0 [ 15.124] Build Operating System: openSUSE SUSE LINUX [ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64 [Code]....
i Just installed ubuntu 9.10 on my Acer laptop im new to linux and dont know how to fix this, (the resolution is stuck) the graphics card of the laptop is an Intel HD graphics media accelerator or somthing and i have looked everywhere for the drivers intel only supply them for windows 7 im completely stuck
I've been using Ubuntu for about two years now, then suddenly today (after my PC accidently lost power) the screen resolution changed to 800x600 (it is, in fact, a widescreen monitor, and this resolution looked 'zoomed in'). The only two resolutions detected with xrandr were in the 4:3 ratio (800x600 and something worse). I followed some instructions, trying to reset the resolution to 1024x576.
I got as far as
$ xrandr --newmode "1024x576" ...
then,
$xrandr --addmode default 1024x576
but when I
$xrandr --output default --mode 1024x576
I a message to the effect of 'your screen can only support 800x600 or less'. Ah-ha, I thought, you stupid machine; this screen has had a greater resolution for over a year.
And so, from System->Preferences->Monitor, I forced the computer to switch to this new resolution. When prompted, I reset.
My current problem is that when I turn the computer on, the monitor displays a floating 'Input Not Supported' sign. I Ctrl+Alt+F1'd, and now all 'xrandr' and 'cvt' commands return:
Can't Open Display
My first priority is to get the computer back to it's less-broken 800x600 state;
After the latest kernel update (2.6.32-26), my computer will no longer start up with a screen resolution higher than 800x600. Before this update, my computer would sometimes startup with this problem, but this could usually be fixed with a restart (or two if necessary). At this resolution the panels and a lot of tool-bars will not display properly, so I am limited as to what I can do using the GUI.
my video card is an S3 unichrome (I think. It is built-in to the motherboard so I don't know for certain) my screen is an old ctr one I am running Ubuntu 10.04 on the 2.6.32-26 kernel
I have a good Asus monitor in which I can have a resolution of 1280x800 when using Mac Os (I have a Power Mac G4). However, when I try to have a better resolution with Ubuntu, the only resolution that it lets me choose is 800x600! There are no choices. I tried the "detect display" button but it doesn't change anything.
i recently installed fedora 11 i386 from fedora 8 i386. it was a fresh install. with 8 i had a 1024x768 res and my monitor is a 15.4" Polaroid LCD tv that has a max res of 1280x800. when i goto display and try to change the res it only shows 800x600 and below.
Loaded Cent O/S on VMWare Workstation to begin learning for enterprise role.. The largest screen resolution is 800x600. Is this the max or how can I change it to a larger res.?
I installed Fedora 12 into a virtual Machine (using virtualbox). Everything was perfect but the screen resolution is only 800*600. I cannot read the text fine and work is impossible.I searched already other posts but i couldn't find anything helpful.How can i set the resolution at least at ca 1280*1024?
I am using HP Mini 1000 Series with Ubuntu 10.10 (later installed with xubuntu-desktop). I want to run a wine application which requires 800x600 resolution. However, my current resolution is 1024x576. The other available solution is 640x480. Previously, I used pre-installed Windows XP, it allows me to change the resolution to 800x600 by clicking the "List All Modes" button at the display setting, then I can choose the 800x600 resolution. So, I think HP Mini is also able to support 800x600 screen resolution. May I know how can I do it in Ubuntu?
I have tried EVERY solution that has been posted. the nVidia forumswon help. Every solution that involves editing the .conf file crash my system. I wanna have real resolution for my monitor not be stuck at this 800x600 bull$#!tnVidia Graphics CardPlanar PL1700 Monitor
I recently installed Ubuntu 10.04 in my computer, I ran update manager and installed all the actualization but and I can not set the screen resolution higher than 800x600; I have windows XP installed in another partition and the screen resolution can get to 1028x1024 at 85 hz. I have a Pentium 4, 2.20 ghz, 1gb ram, and the video card is a SiS (Silicone Integrated Systems) 300/305/630/540/730 32 Mb.
Im running fedora 11. I pressed the desktop effects button yesterday, and it suddenly changed my resolution to 800x600 when it was previously a lot higher. I couldn't fix it, so i reinstalled fedora 11. Couldn't fix it. Reinstalled Windows XP, then reinstalled fedora 11, and it fixed. Now, 12 hours on, it has gone back to 800x600. How can i fix this?!
My Fedora 12 is not showing screen resolution beyond 800x600. When I installed latest ATI Radon drivers, screen has become blank and I had to re-install.
Just a little background I have a sony vaio VPCZ119X laptop and have been struggling to get all components working under linux especially the intel graphics. I saw that once I upgraded to the latest available kernel release which currently is 2.6.37 rc7. The intel graphics is working, but sometimes when I boot I get a blank/black screen but seems to be lit up. All other functions seem working so for example I am able to login etc just that I dont see anything on the screen.
I have tried the following so far to identify the issue or isolate it:
- Switching to the console screens has no effect, still the black / blank screen.
- Restarting the system does not always immediately get the screen working, sometimes it takes a couple of reboots before the screen is available
- I have a switchable graphics with nVidia I never get this problem when I use the nvidia driver
- I have tried closing the lid etc as suggested in the below post without any change in output, will try further as there are other options available as well The "Black Screen" on Boot I see one difference between both the Xorg log files but I am not able to reason out why this happens hence I will just supply the files here and try not to theorize.
Xorg.0.log - This was the log output when I got the X display working Xorg.o.log.old - This was the log output when the X display was black/blank Also to highlight that I am using the latest kernel release that is still being tested I guess so maybe it is also a bug in the kernel?
I am having some trouble trying to change my screen resolution from the current 800x600.I tried to install driver but it didn't. output of lspci: 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10)
My monitor is an old, low-res (800x600 resolution) flatscreen, and the loader keeps trying to set it for 1024x768.the initial setup and package selection screens ran fine. it was only after rebooting to the "Welcome" screen that the problems started. I found the "resolution= (800x600 for me) under "additional boot options", but I don't know how to use it.
I've installed CentOS 5.5 on my Acer Aspire One D150. It uses the Intel integrated graphics chip GM945 which isn't supported "out of the box" by CentOS. My screen resolution has defaulted to 800x600, but it should be 1024x600. tried xrandr, and editing the xorg.conf file, and now have gone down the rabbit hole of trying to install xf86-video-intel and its associated dependencies (nested like Russian matryoshka dolls). I'm at the point of trying to install xorg-server, but am getting hung up by its dependencies on xproto and fontsproto, despite having installed them.
I am using a 15" CRT Samsung monitor and when I upgraded 10.10, the screen resolution became 800x600 and I am not able to increase the resolution of it. This was working fine with 10.04 version.
Below is the o/p for "xrandr": xrandr: Failed to get size of gamma for output default Screen 0: minimum 800 x 600, current 800 x 600, maximum 800 x 600 default connected 800x600+0+0 0mm x 0mm 800x600 0.0*
I also see a continuous message box at the top left corner of my monitor with text as "Unknown".
monitor is a Optiquest Q19wb. I normally have is set on 1280x1024, but fedora will only go to 800x600. It has detected the monitor correctly. Not sure if being connected to KVM will cause issues. The xorg.conf does not exist. Have installed system-config-display but have not run yet.
This is my first posting as a Linux Newbie. I have installed Ubuntu 10.04 inside of a MS Virtual PC on my Vista machine. Everything seems to work beautifully and is stable. However, I would like to use a resolution higher than the current maximum of 800x600. I've poked around on the web and have tried various tips. I tried using the xrandr options which added a higher resolution mode, but when I would try to set the output to that resolution, I would get an error message to the effect that I could not exceed the current maximum of 800x600.
I tried to cobble parameter values together and create an xorg.conf file, but every iteration seems to produce a bunch of colorful vertical bars within my Virtual PC window, and I would have to blow away that virtual PC setup and rebuild it (along with reinstalling Ubuntu). As I said, 800x600 is not a show stopper, but I would like to take advantage of the real estate I have with my display. These "fifty-five year old" eyes could benefit from the larger size. FYI, I did take a stab at installing Virtual Box, but got the infamous "blue screen", so I would rather stick with what appears to be a stable virtual PC base.
I've got a Toshiba R500 with a Intel 945 GM graphics card that in 11.2 worked perfectly with 2D and 3D drivers from Intel that were installed automatically via the install or yast update. With 11.3 I have the Intel 2D driver, but the 3D driver says "Unknown Classic (7.8.2)" when looking at the details through the My Computer icon on the desktop. I did some searching on these forums and google but haven't been able to find an answer, has driver support for the Intel 945 GM been removed because it's old hardware or is there just no driver in the repo's for 11.3 yet?
I have been unable to get both opensuse 11.2 and 11.3 32 bit versions work properly on my DELL Latitude E6410 laptop. With both 11.2 and 11.3 KDE Live CDs I get no graphical display when I attempt to boot into the Live system. VESA mode does not help either, only text mode works. So I installed the system in text mode but during the first boot the screen went blank again.
One peculiar thing is that 11.1 installs and boots fine, what gives? Is this even supported or I shouldn't even try to bother getting this setup to work? Has anyone been able to run opensuse 11.3 on a Core i7 integrated Intel graphics system with X system working?
Having given up on a failed OpenSuse 10.3 and installed 11.2, I am now unable to get better screen resolution then 800 X 400. Previously there was no apparent limit, so I know the Viewsonic display is capable of much more.
In Yast2 the nvidia graphics card is identifed OK, but even in Yast I can find no way of getting back to the higher resolution. In the Desktop-tweaking app all I get offered is even lower resoulutions.
Is there anything I can do in Ubuntu 11.04 to get the Intel 945GM to work more stable and run faster? It won't load the Unity interface at ALL. It won't load the Classic Desktop unless I use the one without effects, or else the title bars disappear. Is there something I can do to make it more stable, and run more efficiently?
