Hardware :: Intel Graphics And Games - Black Screen

Mar 17, 2011

I use Intel HD Graphics and every time I run a game, it black-screens and I have to restart a thousand times before the game works and I can switch to windowed mode (restart once to do this).

lspci:
[alex@alex01 ~]$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) .....

I also use an HDMI cord (since computer has HDMI support) so this may be contributing to the problem. The same does not occur with my laptop, which runs Nvidia graphics and Ubuntu. I really want this to not happen so I can play my games instantly without restarting a million times. Some games have yet to work (AssaultCube mostly).

View 14 Replies


ADVERTISEMENT

OpenSUSE Hardware :: Intel I7 HD Graphics Gives Black Screen Sometimes On Boot Kernel 2.6.37 Rc7

Dec 30, 2010

Just a little background I have a sony vaio VPCZ119X laptop and have been struggling to get all components working under linux especially the intel graphics. I saw that once I upgraded to the latest available kernel release which currently is 2.6.37 rc7. The intel graphics is working, but sometimes when I boot I get a blank/black screen but seems to be lit up. All other functions seem working so for example I am able to login etc just that I dont see anything on the screen.

I have tried the following so far to identify the issue or isolate it:

- Switching to the console screens has no effect, still the black / blank screen.

- Restarting the system does not always immediately get the screen working, sometimes it takes a couple of reboots before the screen is available

- I have a switchable graphics with nVidia I never get this problem when I use the nvidia driver

- I have tried closing the lid etc as suggested in the below post without any change in output, will try further as there are other options available as well The "Black Screen" on Boot I see one difference between both the Xorg log files but I am not able to reason out why this happens hence I will just supply the files here and try not to theorize.

Xorg.0.log - This was the log output when I got the X display working Xorg.o.log.old - This was the log output when the X display was black/blank Also to highlight that I am using the latest kernel release that is still being tested I guess so maybe it is also a bug in the kernel?

View 9 Replies View Related

Fedora Installation :: Can't Install FC10 Or FC11 For Desktop With Intel GMA X4500HD Graphics - Screen Goes Black

Jul 20, 2009

I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.

View 1 Replies View Related

OpenSUSE Multimedia :: Black Screen On Exiting Full Screen Games?

Jul 18, 2010

OpenSuse 11.3 with nVidia drivers.I have the screen working fine though it only runs in 1600x1200@75 using the nVidia driver (GTX260 card).When I play a game in full screen mode all seems OK but when I exit the game then I just get the mouse pointer on a black screen.There must be something present since the cursor changes as I move it, normal pointer -> hand over a link etc. It's just that black on black isn't very readable.

View 5 Replies View Related

Fedora Installation :: Intel Xorg Driver Kills Screen (black) And Keyboard On Intel GMA X4500?

May 12, 2009

I am wondering, what is the status of Intel GMA X4500 driver on Fedora 10.

View 2 Replies View Related

Ubuntu Multimedia :: Dual Screen Crash Intel Hd Graphics

Jun 22, 2011

After 2 months without any problems, my second screen plugged on my laptop has stopped working. It works on my windows partition. When I start the computer, I see the login screen on both screens. When I enter the password, both screen turn to black. If I unplug the extra monitor, the laptop start normally.I'm on Ubuntu Natty, my laptop is a Thinkpad E420s with Intel HD graphics, i5 cpu, 4gb ram.

View 9 Replies View Related

Ubuntu Installation :: Black Screen With GMA HD Graphics?

Nov 20, 2010

I'm trying to run 10.10 off a USB. On one computer with a nice discrete AMD graphics card, the thing boots fine. On a Dell Latitude e6510 with Intel HD Graphics (the one that comes with a Core i7) I get to the boot screen, the initial text crawl, and then the screen blanks.

Now, I can hear the standard Ubuntu start up noise about 20 seconds later so I know everything is running, just the video driver is not.

I can not do a CD install or anything off the hard drive, only the USB. I'm wondering if anyone knows some edit you can do at the boot menu (using tab) to revert to some graphics safe mode.

View 4 Replies View Related

Ubuntu :: Black Screen On 10.04 Boot - Works On Low Graphics?

May 1, 2010

Ubuntu has been crashing on boot. I used a recovery mode kernal and went into failsafe mode, upon which point a msgbox told me to switch to low graphics. Then Ubuntu looked completely normal and functional with no problems. To me - an Ubuntu amateur, it seems like a driver problem and that running in failsafe mode will have its setbacks.

View 9 Replies View Related

Ubuntu :: Low Graphics Mode - Screen Suddenly Goes Black

May 30, 2010

The last few days I have had to reboot my Ubuntu-workstation when the screen suddenly goes black. After some seconds I get a pop-up with the message:
Ubuntu is running in low-graphics mode
There is some buttons that tells me I can do different things (like reconfiguration ) but whatever I do I end up loosing all windows I worked in earlier. And having to reboot to get back full resolution. I have not found any way to reproduce this behavior. It has happened after being logged in for several days and sometimes just after boot and login when I'm starting an xterm and in all time intervals in between the output of:

sudo lshw -C display
PCI (sysfs)
*-display
description: VGA compatible controller
product: 82G33/G31 Express Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 10
width: 32 bits
clock: 33MHz
capabilities: msi pm bus_master cap_list rom
configuration: driver=i915 latency=0 .....

View 6 Replies View Related

Ubuntu :: Screen Sometimes Suddenly Goes Black And Go Low Graphics Mode

Jun 3, 2010

Recently upgraded to 10.04 after countless problems w/ Karmic & already problems with Lucid! The screen sometimes suddenly goes black, then goes into low graphics mode, if I let it, thereby changing screen rez & unless I reboot, I am stuck in this mode. If I don't choose temporary low graphics mode, I must reboot. Many others seem to be experiencing the same problem yet have been offered no solution by the developers. So.

View 9 Replies View Related

Ubuntu :: Boot To Black Screen After Safe Graphics?

Jun 6, 2010

In effort to fix garbled text when scrolling I attempted to boot into safe graphics mode. I now get to the login screen, enter password and then go to black screen.

Kubuntu 10.04 upgrade
geforce FX5200 graphics card
2gb memory
AMD XP2800+

View 1 Replies View Related

Ubuntu :: Black Screen After Installing Graphics Driver?

Nov 27, 2010

just installed 10.10 on my Sony Vaio F laptop. Here's my specs:Processor: Intel Core i7 720QM (1.6 GHz)Memory: 6 GB DDR3 (1333 MHZ)Graphics: NVIDIA GeForce 330M (1 GB VRAM)Hard Drive: 500 GB (7200 rpm)Native Resolution: 1920x1080I shrunk my Windows partition, installed Ubuntu on it's own partition with swap space, and mostly everything went fine. When I booted up, the resolution was set at something like 2048x1536, and it only displayed the top left corner of about 70% of the screen. When I changed to any other resolution, it looked really bad, and the whole screen still wasn't displayed.

Then something popped up telling me to install a driver for my graphics card, so I did, figuring it would fix the problem. When I booted and picked Ubuntu, I was stuck with a black screen. So I restarted and tried booting into safe mode. I got in, and it displayed the whole screen at 800x600. Still no luck in regular mode, however.

View 2 Replies View Related

Ubuntu :: Installing New Graphics Card - Screen Went Black

Mar 30, 2011

I'm running Ubuntu 10.10 on what used to be a windows vista. I bought me a new graphics card today so that I could run dual screen (GeForce210). I saw a guide at [URL] and I followed it.

I typed: sudo apt-get install nvidia-current
then I restarted my computer, once again as instructed I typed:
sudo nvidia-xconfig then logged out as instructed...

After I logged out the screen went black and I was not able to login. So I restarted my computer. Now when I turn on my computer I am getting this error and it's stopping at it.

fsck from util-linux-n/g 2.17.2
/dev/sda1: clean, 255658/294092280 files, 5031534/117616640 blocks
*starting apparmor profiles
Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
*setting sensors limits
Starting GNUstep distributed object mapper: start-stop-daemon: unable to stat /usr/bin/gdomap/ (no such file or directory)
speech-dispatcher disabled: edit /etc/default/speech-dispatcher
*starting the winbind daemon winbind

It stops on this screen. I do not want to wipe it but I cannot get it started. I do have an external hard drive and at the moment I am using my Ubuntu disc to "try Ubuntu" I was going to try backing up everything I have but it will not let me access root because I am not logged on to that user, is there anything I can do to get pass this? I've called around and no one is willing to work on my computer since it is now running on Ubuntu 10.10

View 7 Replies View Related

Ubuntu :: Black Screen After Installing New Drivers For Graphics Card

Jan 8, 2010

When I start ubuntu I get a black screen, I can't do anything, this started when I installed the new driver for my graphics card. I don't know what to do. I have a i7 core (64-bit) and nvidia GTX 260 (twice).

View 3 Replies View Related

Ubuntu :: Ati Graphics - 10.10, OC'ing - Get A 'black-ish' Screen - Get Into Text Mode From Booting Up?

Dec 31, 2010

What happened was, i used sticonfig to attempt to OC my graphics card, it all seemed to work well, then i put some stress on the card and got a 'black-ish' screen. No matter i though i will boot into text mode (How do you do it normally? The only reason i could was because i crashed my system and could choose recovery mode to then choose text based) and change it back to default and it will all be fine, woo... But apparently you need to be in X server for that command to take effect. ****...........

How do i get into text mode from booting up?
How can i fix this?!

I have tried looking in BIOS but there is nothing there. Have i just fried my card? (It was close to max settings - although only on full load for like 1 second) Could booting up normally, and just 'going in blind' work, like opening up terminal with a hotkey and just entering the command from there....

Ubuntu 10.10
PowerColor Radeon HD 5870
Ati catalyst drivers installled

View 2 Replies View Related

Ubuntu Installation :: Graphics Driver - 10.10 - Get A Black Screen Of Nothing On Restart

Aug 7, 2011

i cant install my graphics drivers. Everytime i do, i get a black screen of nothing on restart. I'm running ubuntu 10.10. here are my graphics cards.

[Code]...

View 1 Replies View Related

General :: 82845G Graphics Controller - Screen Goes Black After Logging In

Jan 14, 2010

I have installed the latest debian on a dell optiplex gx260 which has a 82845G chipset and there are some strange problems.The system is configured with autologon as a standard user. Sometimes, after logging on, the screen goes black but if I connect to it with vnc, I get a working desktop. Yesterday I booted it without a display attached to it and now I cannot set it to the right screen resolution anymore (1440 x 900) which was working fine before.

I have googled and searh the forum but cannot find the right information. According to Intel, the latest driver should be in the distro but I cannot find any details about that (version/date). grep Driver /etc/X11/xorg.conf returns

[Code]....

View 15 Replies View Related

OpenSUSE Hardware :: Black Screen With Radeon HD 4200 - With All Graphics Drivers?

Jul 17, 2011

I'm using openSUSE 11.4 on a HP Pavilion laptop, and it was working fine until last week or so. A zypper update seems to have upgraded to a package with a nasty bug though: it now boots into a black screen, instead of showing kdm.And the only option after that is to forcefully shut down the machine;ither Ctrl+Alt+F1 nor Ctrl+Backspace nor Ctrl+Alt+Del does anything. Not sure if this means the kernel hangs,or just that X blocks all keyboard input as well.The issue with powering off with the hardware button is that I don't get full log files (especially kdm.log) so it's a bit hard to investigate...I have tried many things, here are the results:

* Default radeon driver + kdm = black screen
* nomodeset + radeonhd driver + kdm = black screen [driver doesn't support HD4200 anyway]
* nomodeset + radeon driver explicitely requested + kdm = black screen

[code]...

View 4 Replies View Related

Ubuntu :: Just Changed Graphics Resolution In STARTUP MANAGER - Black Screen

Jan 18, 2010

I just stupidly changed my graphics resolution in System - Preferences - Startup Manager, now i dont get a login window or anything just a black screen. I also disabled the splash but i assume this just gets rid of the ubuntu loading line thingy?

the weird thing is that the resolution was set to 640x800 or something like that in the Startup Manager as default and the laptop im using (an old Toshiba Amilo P4) supports 1024x768. the System - Preferences - Display menu wouldnt let me change any display settings which is why i was messing about here. I havent got any backed up x org file and only a live usb of super os/ubuntu - no cd or floppy drive.

View 1 Replies View Related

Ubuntu Multimedia :: Intel Corporation 82G33 / G31 Express Integrated Graphics Controller - Screen Seems To Be Flashing Over And Over

Jul 18, 2011

[code]...

Just got World of Warcraft Installed and when I start the game after I get past the 2 cinema's while I'm trying to click yes on the rules the screen seems to bee flashing over and over and over. I was thinking maybe the 3d accelerator isn't installed or maybe I need to install something because its Intel?

[code]...

View 2 Replies View Related

Debian Hardware :: {Solved}Intel Driver Errors Black Screen With Trunk Kernel?

Jan 29, 2010

I see this at boot:

fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
fbcon: inteldrmfb (fb0) is primary device

[code]....

View 10 Replies View Related

Ubuntu Installation :: X201 Black Screen On Bootup With 10.04 RC (can't Get Intel Xorg Driver To Install)

Apr 27, 2010

Pretty much what the title says.. a few more details:

- I installed 10.04 using the alternative install so I've been doing all this in safe mode
- I installed a newer kernel (2.6.33) and still black screen
- I tried to install an updated Intel xorg driver, but I kept getting dependency errors (xorg, x11, something else)

I read another thread on this forum from a user who is using the same platform (Intel HM55), and I got stuck at the last point (can't get Intel xorg driver to install).

View 4 Replies View Related

Ubuntu Installation :: Black Screen Using Alternate Cd On Hp Compaq 6710b (INTEL Mobile GM965/960)?

May 7, 2010

When trying to install Lucid on my HP Compaq 6710b (INTEL Mobile GM965/960 graphic controller) using the alternate i386cd with an usb pen i (re-)experiencing (known from the Jaunty installation) the following problem:Boot from USB (works) Select language (works) Choose to install ubuntu (works) Removing quit from the boot options, hit enter, see some output (works) Starting the installation interface (fail) The screen wents to black, but system seems not froozen. What i've tried to fix this issue:fb=false as bootoption (worked in jaunty, does not work with lucid) frambuffer=false

fb=off
debian-installer/framebuffer=false
vga=123, tried all of the offered modes

vga=771 (get some screwed up output on the screen, which i guess from that the system/machine is not frozen)
i915.modeset=1
i915.modeset=0
xforcevesa etc

Anyone managed to install Lucids with INTEL graphics + the alternate cd? PS: I need the alternate cd to setup an encrypted system. PPS: Just tested the desktop i386 image which works flawlessly.

View 4 Replies View Related

OpenSUSE Install :: DELL Latitude E6410 - Core I7 M620 With Integrated Intel HD Graphics - Blank Screen

Aug 19, 2010

I have been unable to get both opensuse 11.2 and 11.3 32 bit versions work properly on my DELL Latitude E6410 laptop. With both 11.2 and 11.3 KDE Live CDs I get no graphical display when I attempt to boot into the Live system. VESA mode does not help either, only text mode works. So I installed the system in text mode but during the first boot the screen went blank again.

One peculiar thing is that 11.1 installs and boots fine, what gives? Is this even supported or I shouldn't even try to bother getting this setup to work? Has anyone been able to run opensuse 11.3 on a Core i7 integrated Intel graphics system with X system working?

View 9 Replies View Related

Ubuntu :: Sudden The Screen Started Flashing Black, The Same Type As When Install New Graphics Drivers?

Apr 4, 2010

I have an old machine running Ubuntu 9.10 and XP.t is a P4 and Nvidia FX5200 card.Yesterday all of a sudden the screen started flashing black, the same type as when you install new graphics drivers and the resolution is changing. Only here it keeps happening over and over, the mouse isn't usable fully, the icons and menus are distorted, and I basically can't do anything.

I ended up reinstalling 9.10 and everything was working fine until I installed EnvyNG to get my nVidia drivers. It required a restart, and once I logged in the same thing started happening. So I said screw this, and installed 8.04. Yet even in 8.04, once I used EnvyNG to install the drivers, the same thing happened.A few other detailsP works fine, although one time a similar thing happened on XP (not as bad), and was fixed with a reboot.- This PC runs through a KVM switch, but I connected it directly and the same thing happens.I've found no help via Google. Sounds like a possible hardware problem, but it seems to work fine in XP and only acts up in Ubuntu once I install drivers.

View 7 Replies View Related

Ubuntu Installation :: Dual Boot With An I8xx Graphics Chip On 10.04 - Get Black Screen Of Death

May 26, 2010

I'm having no end of problems trying to get 10.04 onto my older Toshiba Satellite A50 laptop that I use as a spare laptop round the house. The laptop previously dual booted with XP and Xubuntu fine. I wanted to give Lubuntu a go to see if it's performance was better on this older hardware. When installing I got the black screen of death, and also got the same problem with the Xubuntu CD. Research pointed me in the way of this article: [URL] I was able to boot the Lubuntu Live CD using the instructions outlined in method A.

Once installed however I rebooted and Grub seemed to be knackered. Just sent me to a recovery console of which I had no idea what to do. As I could no longer boot into Windows either I reinstalled Xubuntu 9.10 and all was fine. I decided yesterday to give it another bash this time connecting to my wireless from the live cd hoping it would download an update to fix this problem. Nadda, Grub this time did show and I was able to boot into XP, but upon picking my Linux distro I now get an unrecognised device error with a long string of charachters and then it dumps be back into the grub menu, choosing the recovery mode version does the same thing.

View 6 Replies View Related

OpenSUSE Hardware :: Ubuntu Edgy On Intel 945GM Graphics & Wide Screen LCD NoteBooks - Resolution Limited To 800x600

Mar 12, 2010

I'm stuck at 800x600, and no matter what i try i seem to hit a dead end. I've got the Intel Mobile 945GM/GMS rev 03, and it seems like lots of people have had to fiddle to get it working. Here's the info I've collected and tried so far. Ubuntu Edgy On Intel 945GM Graphics & Wide Screen LCD NoteBooks � 100% Linux Addict

HOWTO: install drivers and set up widescreen res. with Intel 945 vga card and Ubuntu - Ubuntu Forums Mostly Harmless: SuSE, Acer aspire 5580 and non-standard resolution 1280x800 Intel 945gm And 1280x800 Laptop Monitor Problem Suse 10.2 - openSUSE Forums I'm not too proficient with linux yet, so the right solution might be here and I'm just not getting it right. Maybe i'm not on the right path at all.

View 9 Replies View Related

OpenSUSE Hardware :: 11.3 On Intel Core I5 With Integrated Graphics + Intel H55 Express Chipset

Aug 18, 2010

! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...

I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...

View 8 Replies View Related

OpenSUSE Hardware :: Intel HD Graphics (Intel Core I3) With Suse 11.3 - Poor Resolution

Jan 2, 2011

I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :

Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....

View 9 Replies View Related

Ubuntu :: Graphics / GUI 10.04 - Skin Flickered Black / Green A Few Times Then White Vertical Lines Started Appearing Down From The Top Of The Screen

Aug 3, 2010

Ever since the problem with Flash started up a few days ago, (Videos Lagging/jumpy/jerky horridly.) I decided to finally switch from 9.10 to 10.04...all was going well until a few minutes ago while I was browsing themes and running Konversation, the skin flickered black/green a few times then white vertical lines started appearing down from the top of the screen to about the middle, (Almost looked like the teeth on a haircomb). I had to then shutdown and restart. What id like to know is are the two connected (My earlier flash problem and this) or how I can fix it, so far it hasn't happened again but I'm starting to worry, I've never had problems with Ubuntu until a few weeks ago.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved