Ubuntu Multimedia :: Cannot Set Headphone Volume In Alsamixer
Jul 21, 2010
since updating my laptop to 10.04, I can't get any sound out of my headphones. If I plug the jack in, the sound from the loudspeakers turns off, but the headphones stay quiet.
I have run alsamixer and in fact the volume for the headphones is stuck to zero, and it's not possible to increase it.
My hardware config is posted here: [URL]
What I find funny, is that amixer reports that I don't have the capability of regulating the headphone volume:
Simple mixer control 'Headphone',0
Capabilities: pswitch penum
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
I have also used the AlsaUpgrade script to get the latest version of alsa, but it still doesn't work.
View 8 Replies
ADVERTISEMENT
Apr 8, 2011
When i installed Ubuntu, everything worked fine, sound drivers installed automatically and volume was perfect.Then one day as I was talking to a friend on skype, I tried changing the output to speakers from my headset during the call and i didnt get any output. I tried changing a few settings, can't remember which ones exactly until I noticed someone had pulled the audio cable from the back of my PC. I replaced it but I started getting very very low sound.I found out about alsamixer and when I ran it, I found that the volume on that device was turned down, i turned it up and voila! sound back to normal.However, now when I reboot, my sound goes down again. I have tried deleting the asound.state file and running the save command, "sudo alsactl store 0" I think, as someone suggested, but no cigar.
View 3 Replies
View Related
Aug 1, 2010
I've got a Toshiba L650, Debian testing/unstable, KDE4.4.5. The sound worked when I first installed everything (played a movie in dragon player, etc), but shortly thereafter it stopped working. It seems like the hardware is okay (all hardware is recognized, all relevant modules loaded, volume in alsamixer at 100%, the system beep -- set in the BIOS -- works), but I still can't get sound to play. Once or twice, right before KDE shutdown, I could hear the exit sound, but that's it. Last night I exited KDE (without hearing a sound), shutdown kdm, then:
mv $HOME $HOME.backup
mkdir $HOME
and restarted kdm and kde...still no sound! I created another user, and still no sound!
View 6 Replies
View Related
Mar 22, 2010
I'm running fedora 12 on my Asus Z92VA laptop. Everything is running fine, except for the fact that I have no audio on my headphone. When I use the command "alsamixer -c0", there is no listing for the headphone.
When I use the command "cat /proc/asound/card0/codec#* | grep Codec" I get the following output:
Codec: Realtek ALC880
Codec: Conexant ID 2bfa
View 11 Replies
View Related
May 16, 2010
I have an imac and i recently decided to dual boot Ubuntu as well.
The sound is fine on the mac partition but the internal speakers dont work on the Ubuntu side.
headphones do work but the volume is oddly low
Nothing is muted on alsamixer, and I think i have the right driver for my sound card
View 4 Replies
View Related
Nov 13, 2015
I'm having a problem all the sudden with amixer. set Master 5% used to control the pulse audio master volume. Suddenly, it will only raise and lower the headphone volume. Pulseaudio works, but I no longer have a master volume at all.
View 3 Replies
View Related
Jun 25, 2010
Just switched my laptop from that other operating system to openSUSE11.2. Everything works great except for one odd little bug. Both my speakers and headphones have output, are affected by the volume control and it even detects when I plug in headphones and stops output to the speakers. However the moment I adjust the volume, output to my headphones stops, and my speakers start.
Following is my multimedia information: [URL]
~> rpm -qa '*alsa*'
alsa-plugins-pulse-32bit-1.0.21-3.3.x86_64
alsa-plugins-pulse-1.0.21-3.3.x86_64
alsa-plugins-32bit-1.0.21-3.3.x86_64
alsa-1.0.21-3.2.x86_64
alsa-plugins-1.0.21-3.3.x86_64
alsa-utils-1.0.21-3.1.x86_64
alsa-oss-1.0.17-25.2.x86_64
alsa-oss-32bit-1.0.17-25.2.x86_64 .....
View 9 Replies
View Related
Jun 19, 2011
I am not getting any sound with rythembox. My sound levels are mute with some of the bars in alsamixer. I do not know how to adjust the bars to unmute, or to raise the sound once unmuted.
View 1 Replies
View Related
Jul 14, 2011
alsamixer doesn't change the real sound volume of my USB sound card (though the dials move okay)
# uname -a
Linux RPN 2.6.28.10-rpn7.2 #1 SMP Tue Jun 7 07:23:01 EDT 2011 i686 GNU/Linux
# cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
[code]....
View 1 Replies
View Related
Jan 5, 2011
My microphone wasn't working so I entered alsamixer to amp up it's volume and see what's wrong.Not sure what I did wrong but now the gnome volume control applet in the Indicator does not affect system volume at all.I can even mute it and it will not mute anything.The volume controls in alsamixer work fine and changing the volume in alsamixer affect system volume immediately.What could I have done? How can I get back volume control inside gnome?
View 2 Replies
View Related
Apr 29, 2010
I've just switched to slackware from opensuse (and before ubuntu) for few days. Everything is ok , no, is awesome when I was doing my job on run level 3. However, I found there was no sound when I booted it to run level 4 (xfce) trying to play some music on yesterday. After googled a lot, I thought there must be some wrong with my alsa driver, because I couldn't adjust the PCM volume from either alsamixer or amixer. In fact, there is even no PCM section in it, but two sections named "IEC958" and "IEC958 D" instead with no "pvolume" capability. Here is some outputs:
Code:
bash-3.1# cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xefffc000 irq 21
[Code].....
ps: I've reinstalled alsa-lib, alsa-oss, alsa-utils from the installation dvd, no use
View 9 Replies
View Related
Apr 15, 2011
I ran openSUSE way back since version 7.3, before that I was on Redhat 6 and briefly at 5 before that. I know my way around Linux pretty well but two problems with Fedora are bothering me right now. I'll begin a separate thread for each one to keep things clear.The first problem is with sound. I remember having problems with the Intel ICH7 chipset and pulseaudio on openSUSE, but the problem I have with Fedora is different. Sound works, but each time after rebooting, I have to open alsamixer to turn the master volume up from zero. Being an openSUSE user, I am comfortable with KDE, so I am running KDE 4.6.1 as my DE.Two sound devices have been detected, one is the Intel soundcard, which is recognized as snd_hda_intel. The primary sound device, according to alsa, is my Logitech UVC cam.
View 2 Replies
View Related
Mar 22, 2011
is there a way to have my volume level change to a specified level when i insert my headphones to avoid having my ears blasted with music because i forget to turn the sound down when shutting off my computer last time? perhaps a alsa patch or a script?
View 5 Replies
View Related
Jan 13, 2010
Whilst sound works for MBP5,1 / 5,2 under Karmic, it could definitely be better - mainly the master volume does not affect the headphone output, and the speakers don't automute when headphones are plugged in. However, I've finally got around to writing a patch for alsa which fixes this - the patch is against the latest version of alsa-drivers (1.0.22.1). If you want to test it (since so far I've only tested it on my MBP5,1 - any feedback from MacBook 5,1 / MB(P) 5,2 owners would be great too) follow these instructions: First make sure you don't have any versions of linux-backports-modules-alsa installed:
[Code]....
View 7 Replies
View Related
Feb 14, 2010
Every time I turn on my laptop, the alsamixer settings get reset. How do I make the changes permanent?
View 2 Replies
View Related
Aug 29, 2010
i read through and spent an hour trying to fix my maudio mobile prei tried uninstalling and reinstalling alsa. i tried getting a new updated also from their site and installing it.and no luck. put the error message i got from trying to run alsamixer in the title.i dont know why it says that there are no alsa drivers when ive tried to install them 2 different ways
View 1 Replies
View Related
Jan 29, 2010
In karmic my settings are not retained, have to unmute in sound preferences or open alsamixer
and raise master and speaker in Terminal. What is fix to save settings using 9.10 with card below. code...
View 4 Replies
View Related
May 30, 2010
At Ubuntu 10.04, I amplified sound maximally using alsamixer and volume icon on the menu bar but I want to amplify further.
VLC can amplify sound upto 400% but only inside VLC.
Are there any such program to amplify sound in general at Ubuntu 10.04?
View 4 Replies
View Related
Sep 20, 2010
OS: fresh installed 10.04.1 64 Bit,
Kernel: 2.6.32-24-generic
Mainboard: Gigabyte GA-G41MT-ES2L with
# 2/4/5.1/7.1-channel
# Realtek ALC888B codec
ALSA: Alsa Update Script [URL]
cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.23.
Compiled on Sep 20 2010 for kernel 2.6.32-24-generic (SMP) .....
View 3 Replies
View Related
Sep 11, 2010
i just bought a ASROCK core 100ht and installed ubuntu 10.04.
My speakers and headphone works fine but my microphone is not working, a common problem. Usually i solve it through alsamixer. However my Alsamixer shows only " Master PCM S/PDIF Capture " (see pic)! And no microphone option. Does anyone knows what is going on?
these are few of my outputs :
francesco@checco:~$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfbcf0000 irq 22
francesco@checco:~$ amixer
Simple mixer control 'Master',0
[Code]....
View 3 Replies
View Related
Aug 17, 2011
I was having trouble with using my T500's internal microphone, and I figured out that if I run alsamixer in terminal, and if I increase the level of "internal mic," then it works fine. Now the problem is that it seems periodically the setting reverts and I lose the mic volume and I have to re run alsamixer and do the setting again.
Is there any way I can set this setting in KDE, and preserve the setting once it is done?
View 6 Replies
View Related
Oct 29, 2010
I've got my xubuntu 10.10 install just about perfect on a little acer aspire d250, apart from a small sound useability issue: In the interests of simplicity and resource usage I removed pulseaudio. After a bit of fiddling I got it so that my USB soundcard (ProDac) is recognized and automatically set as the default soundcard when plugged in. Any sound applications automatically use the USB sound if it present, no need to around with pulse. The only problem is that my netbook's volume control keys still only control the master volume of the inbuilt soundcard, and have no effect on the usb sound. Does anyone know of a way to change which sound device these keys actually effect? I'd like to write a little script so that when the usb device is detected the keys are remapped.
View 1 Replies
View Related
Mar 7, 2011
I'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.
First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.
View 1 Replies
View Related
Mar 24, 2011
I used Ubuntu 10.10 (64 bit) on IMac i7. As far as, I remember, after installing Pulse-Audio Equalizer, for each restart of the system, after login screen, system sets volume to maximum value. What can I do?
View 1 Replies
View Related
Jun 12, 2010
since using 10.04 I have a big problem with my usb headset (freetalk everyman)
1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.
2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:
[Code]...
View 6 Replies
View Related
Oct 31, 2010
I am struggling with a problem with the volume control... when i try to adjust the volume with the sliding bar i can not do it. If i put the scrollbar to the 0 position, it is muted. when i move it to anywhere else, i get the full volume. From other programs like vlc, i can adjust the volume with no problem.
View 2 Replies
View Related
Apr 10, 2011
My volume control seems to have only three settings: TOO LOUD, VERY QUIET, OFF. If I adjust the Master volume slider from the Panel, only about the right 1/8th has any effect and if I slide it past about the 95% mark, I get no sound at all. At the far-right end of the volume control, I get total volume. It's basically like the slider only has any impact in the top 5% of it's space. Below 95% of the slide, there is zero volume.
It's so drastic, that one tap down of the volume button on my keyboard kills the sound (because it nudges the slider past that 95% mark). This happens in the Audio settings, etc., system-wide. If I adjust the volume for an individual app from within the app (MPlayer, for example) it behaves exactly as expected (that is, app volume works smoothly, it's just master volume that has this issue). I have run through most of the "obvious" things-- I'm wondering if I broke something by installing the extra KDE packages to get Amarok to work.
View 3 Replies
View Related
May 4, 2010
How can I stop Mplayer from messing with my alsamixer settings?
View 2 Replies
View Related
Jun 24, 2010
I have a Creative SoundBlaster live SB0490 USB sound card. Alsamixer only shows a mic channel for this card although it has a line in. Is this because it is not supported or how it is meant to be? I have problems with no audio out on a program which directly accesses the card as hw:1 although it is actually using it and wonder if this is all related. Strangely I can play sound through the card using rythmbox.
Code:
uname -a
Linux gvj-laptop 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 i686 GNU/Linux
gvj@gvj-laptop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
[code]...
View 4 Replies
View Related
Jun 13, 2010
I'm running squeeze (last updated today), and everything has been working great. There is only thing that would simplify my life minutely..Anybody know how can I have the volume buttons on my laptop change the "pcm" channel volume rather than "master"? If they could control pcm, then I could adjust the volume coming out of my headphones or my computer speaker (both controlled by pcm, but not master...seems strange to me) with just one click.I tried to find this info online, but all results seem to refer to an older version. The simple "click here, set this" solution no longer is possible.
View 2 Replies
View Related
